110v & 230v Free Energy Generator with Microwave Transformers _ New Method 2023
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- Free Energy Generator 20Kw with Microwave Transformers _ New Method 2023
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO MULTIPLE LANGUAGES
After 7 months of research and development we have created the new "Liberty Engine 2.0". This new free, free and infinite energy motor is made from microwave transformers and a 220v motor, and doubles the power of its previous model. It also has more improvements such as its futuristic design, we have eliminated the transmission through pulleys and belt to reduce friction, noise and vibrations. We have also added the manual pull start that you have recommended so much in the comments, we have added a rotor with a special alloy to eliminate Eddy currents, and thus, eliminate magnetic braking when connecting electrical charges.
In order for the voltage output to be 110 volts instead of 230 volts, we must manufacture it with microwave transformers and a 110 volt motor.
We hope you like it. If so, subscribe, like the video and leave your opinion in the comments. In this way we will be able to continue researching and creating new ways of generating energy.
- You can see the full version of this video through this link (You can only see it if you are a MEMBER OF THIS CHANNEL):
English version:
• 20Kw Infinite Power Ge...
Spanish version:
• Generador de Energía I...
- Become a member of this channel to enjoy benefits:
💥 / @hiddentechnology_
__________________
We want to thank all the members of our channel, but especially the Elite members:
- @terrykleintackett
THANK YOU!
__________________
Warning: The use, copy, manipulation or broadcast of this video or part of it without the consent of the author is totally prohibited. This video is protected by copyright.
Index:
00:00 Introduction
00:30 Modification of the microwave transformer
01:10 Manufacture of the rotor
03:37 Fabrication of the structure
05:34 How to center the rotor
08:19 First test run
13:42 We disassemble the motor so that they can see that there are no hidden batteries
15:27 Completion of assembly details
16:52 We paint the structure
17:54 Functional test of the LEDs
18:00 Complete assembly of the "Liberty Engine"
25:35 Explanation of operation
26:27 Basic performance test
27:15 Outdoor test
HOW WE RECORD OUR VIDEOS
-Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- Cayer FP1450 Tripod: amzn.to/3C7gIWX
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
Follow us!
💥 Telegram Private Channel: t.me/hiddenTechnology
💥Facebook Channel: / hiddentechnologyyt
Business:
dakrazychannel@gmail.com - วิทยาศาสตร์และเทคโนโลยี
- You can watch the full version of this video through this link (You can only watch it if you are a MEMBER OF THIS CHANNEL):
th-cam.com/video/7Mp2xdzK2xU/w-d-xo.html
This version has no cuts in the tests, and the creation process is much more detailed and complete.
Now with out seeing the video yet, does this replace the original liberty engine or is this different? Did you ever reveal the hidden secrets on the 1.1 liberty engine because, as many times as i have watched the videos, I never saw them. with today going to sh!t, and wars breaking out, sure would be nice to have a backup generator such as this.
Its work...
Só faltou o efeito contra eletromotriz.
Уважаемый автор! Как я могу посмотреть полное видео??? Что нужно для этого сделать??!!! Спасибо!)
Will there be ever a type of this anonymous to buy from you or maybe just only the parts or is it just to show that free enery is possible?
This man is a genius, I can't even see where did he hide the power source
Reguardless how you feel about the free energy part, you can’t deny that was some beautiful craftsmanship in the build.
Agreed, beautiful job..........Laws of thermodynamics take care of the free energy part.
Same logic applied to something else :
"The way they industrialized the murder of millions of people during WWII was brilliant and very well thought out."
Here's another one :
"The mind behind the unabombings was just brilliant."
/slow clap
Yeah that's for sure!! Nicely quality built 👍 👍 👍
Me gustaría hacerlo y probarlo, me puedes pasar por mail los planos
@@marianoerzi1 - No pierdas tu tiempo y dinero, no funcionará!!! Si investigas 1er. Ley de Termodinámica - Conservación de la Energía verás por qué, lo he estado intentando durante 47 años desde mi primer año de universidad. A partir de 2023"Nadie" ha sido capaz de lograr el movimiento perpetuo en cualquier parte del mundo la mayoría de los científicos dejaron de intentarlo debido a la 1ª ley de la termodinámica.
I did this several years ago with something similar… I’m glad you posted this! Cool you figured a way around the eddy currents
Great video! The Segway Portable Powerstation Cube Series looks like a reliable and powerful backup power option for both outdoor adventures and at home. I love that it has a massive capacity and fast recharging time. The waterproof design is also a great feature for outdoor enthusiasts. Thanks for sharing this recommendation!
Ложь всегда преподносится красиво,а то ведь никто не купится! Для современного общества самое то, как говорится, если б не было лоха то и жизнь была плоха.
This is spectacular! 20.000W with 230V means that a current of almost 90A is flowing thru the wires. And nothing smokes, nothing burns. Amazing…
Josef If it’s unreal then it’s a lot of time and effort just for a TH-cam video.
@@Broozer-fw3vl - well, if one has a few million viewers that may convert in a serious money. True or not, popularity counts. No denying that the film is well made and captivating.
you can proof by your self
@@febriyantosutaryat5775 - unfortunately, I do not have enough silver…
It is excluded that a current of 90 A can pass through those coils. For this to be possible, the diameter of the wire would have to be 5 mm or more, but in this case, from the footage, it can be seen that they are much thinner wires. Besides that, I personally don't think those coils are sized to generate 230V, even if all four were put in series I still don't think they could generate 230V with just those small magnets to generate intense magnetic fields and especially at the speed generated by that engine.
Most satisfying to watch.. yeah, you could say that I most definitely loved your video. Imagine the possibilities. Thank you.
Very exciting stuff 🤗
I would love to rebuild the design one day 🤓
It seems like an awesome project to do, eventhough it might not nearly run as smooth as your apparatus 🤭
..but that's OK 😇
I don't mind to learn and gain knowledge how to improve the craft. You're inspiring!
✌
The only way to settle all doubts from the comment section would be to either sell a small batch of prototypes, sell the kits to build them ourselves, or donate a handful of them to people that can fully test and demonstrate them (Mike Adams from The Health Ranger Report would be awesome). Also, a useful demonstration would be to set this up as a backup generator for a full home, even if you have to set several up.
I would 100% buy this kit it was on the market, even as a prototype.
Would love to see an extended trial and have this running an entire household with an A/C unit.
I'm convinced that if this worked for a whole household with appliances, there's an untold market for this unit.
I would definitely buy one and go off the electricity grid.
Good luck gentlemen
Nah, nobody wants this contraption.
The onlu problrm is this CAN'T work !
@@Rolmat67 let's all see. Once its tried and tested and proven to work (or not). Then you can make your judgements. Until then it's your opinion.
@@peterwilliams2815 That's not a judgement.
In the real world (not the world of youtube or internet) "Free energy" simply doesn't exist, and it is impossible that it exists. (I'm enginner in electrics and electronics)
It's just basic physics.
If it existed, why didn't we allready see with our own eyes such a thing, while youtube is full with "working" examples of free energy thingies ?
And if it existed, why are we still struggling with producing energy on our planet with nuclear plants and coal plants, windmills and photovoltaic panels ?
Man, we must be really dumb !
But OK, when you see people believing the earth is flat or Trump won the elections, all is possible...
@@peterwilliams2815...it literally violates the known laws of the universe... you can't just make energy appear from nothing.
We've had so many of these types of things over the years, but sorry, unless there's a complete free area around it showing there's no external leads attached, I'm not convinced.
It's like when it was in the open, butted up against a small pile of leaves. There could easily be cables attached.
MIND BLOWN.
WHY ARE THESE NOT BEING BUILT AT SCALE?
There are thousands upon thousands inventions made every year, that would propel us 100s of years into the future.
Or, let's say where we should be currently if lived by truth.
Just like you say, we are told "this is impossible".
Everything that we have thought to be impossible, but can be done (and have been invented already 100 years ago) is classified and hidden from the public.
If it can be weaponized the military will take it and use it.
All that watch need to save this video on their computer and share it.
Because of GREED.
Or because making this video alone will give ebough TH-cam revenue to have been worth the whole effort of making the video, even if the device itself doesn't actually work.
I would like to hope it does, but seems a bit against the laws of physics. If it was that simple surely it would have already been done...
But then I still hope it actually works 😃🤞🤷
4 coils and you forgot to connect 2 of them for the test... The speed of an AC motor is dictated by the number of poles it has and the frequency of the supply, there is no way in the world it would settle out at 230v even if it could work..which we all know it can't. I do like however that you chose an outdoor spot with plenty of leaves to cover the supply cable 😉
This is it people. This guy has some engineers knowledge. This video exist only for views and ad revenue.
@Ivar TO taking away all the issues with design, the fact half of its not even wired up for thr initial test. Want I want you to do is go and use a piece of 2.5mm2 cable to power something around 20kW which is the claimed output, and the rough cable size they are using here, you will find you leave the "matrix" much faster than you came in 😂
@@MattJordanWoodturning yup , I’m a qualified electrician and I can confirm there’s no way that this wire won’t melt like chocolate if it actually delivered 20,000 watts 😂
@@PhysicsViolator let me start off by saying that this whole thing is rubbish. With that out of they way, that wire actually could deliver 20kw fairly well at a high enough voltage. Could it handle 100 amps? Most definitely not
@@PhysicsViolator does hot or cold energy affect that
Лайк однозначно!!! Чел заморочился знатно, руки растут откуда нужно!!! Клёвый светильник получился, только немного шумноватый , но ценители будут в восторге однозначно!!!
интересно эта лапша на уши окупится у него или нет
@@user-xy2oe5ri1l Судя по количеству просмотров и обилию комментариев, их доход на ютубе с головой перекроет все затраты.
Nice video, but...
I may have missed it somewhere, but how did you compensate for power degradation?
What I mean is how are you able to keep a constant power flow without losing any energy throughout this whole process?
Overtime usually power will fade when fed back on the same circuit, that is why you cannot use UV Bulbs (Solar Bulbs) on a lamp connected to a Solar panel, yes for a short time power will recycle back, but it degrades and loses energy and eventually phases out.
Also with my understanding with homemade alternator's for hand cranked generators, the more devices that pull energy from your alternator while you are cranking it, the more resistance you feel with each turn of the hand crank.
It's smooth in the beginning when you have nothing connected to it, but once you started connecting devices to it, it's like riding a bike on flat surface and then you start gradually going up an incline that just keeps getting steeper and stepper, which in turn takes away power as you are having trouble with cranking it until you remove some or all devices.
Also your Alternator is only using 2 North bands and 2 south bands and their not that close to the coils themselves, which is different from what I have been learning about Rotors and stators and alternators, from what I been learning the closer they are the stronger the magnetic field and the more energy they can produce. but also you need a lot of copper coils in conjunction with magnets to produce a strong current, though there are coiling designs/configurations that do bend the rules, but your High voltage coils just seemed inadequate for energy production on the scale you were doing, especially with all those devices also connected.
Also I must have missed the AC to DC conversion somewhere, even with a hand cranked alternator, it is safer to connect Diodes to convert the AC produced into DC current, then run them through a Capacitor (Or a few depending) to improve the flow of energy (From experimenting, not using Capacitors and just using the Diodes seemed to make the DC current pulse, but once I started using Capacitors, the DC current stayed more at a constant pace), but just plugging in devices without a convergence/regulator somewhere, can cause more energy than needed for the device and actually can destroy it (ie: Bulbs buring out, cellphones short out or burn out and so on).
I am still learning this stuff, so I still do not know all the terminology for it, but I hope you understand what I am trying to convey.
It’s a great piece of Engeneering, well done 👏 ❤
Wow, this could be the power source for my newly developed top-secret but fully working time-machine! (Note: I traveled back in time to write this message!)
So far I have built 3 of these machines. I am using one to power my home, and I have given one to my neighbor on each side of me to power their homes. I am building my next 2 and I'm going to be giving them to other neighbors. Eventually, we will be the first neighborhood to be off the grid for hydro.
In our village the village idiot built this machine and now he supplies the whole village with his electricity. We let him in his faith.
Can I get one? Pleassssssse!
How much will sell one for?
Do you have a drawing , prints,schematics? Please share?
Potrei ordinartene 1 per favore
Recreating that process will be very difficult, but if successful, the results are fruitful. Thank you for this knowledge.
For anyone without a degree in Electrical Engineering, this is simply a permanent magnet synchronous generator that is generating AC being fed into an AC motor which is acting as prime mover for the generator. The actual energy in the closed loop system is placed there by the guy pulling the rope to start it. Once friction, eddy currents and heat eventually eat away that initial energy, the looped system will stop. This is the Electrical Engineering equivalent of the chemistry experiment of pouring Penolphthalein into Sodium Carbonate and proclaiming to have turned "water into wine" to the uninitiated. It is certainly not free energy.
What do you estimate the runtime is under load?
Except that the generator appears to run continuously, drawing aprox 1HP in electrical energy. Such a drain would slow it down in seconds.
Yes. The magnets 🧲 are the only source of energy. Once they become demagnetized all energy is lost 👍
The coils are too far from the magnets for any current to be induced. Had he placed 2 coils on each iron block instead of one and placed them within a 2mm gap, that would've been more believable.
It’s definitely not infinite. The Laws of Thermodynamics disallow that. But it’s still badass for an off grid power generator to charge things like batteries, phone and laptop. Or if you need to use some power tools out in the middle of nowhere. It’d be better for that kind of stuff than solar is. I definitely wouldn’t leave it running 24/7. I probably wouldn’t even leave it running longer than 6-12 hours at a time.
OK, nice mechanical build. Now, let's put it to the test on a test board with stepped resistive loads, an amp meter, a voltmeter, an oscilloscope (to see the wave form and phase angle relation), etc. Would be interesting to see how loading affects rpm and voltage drop in the coils.
You have to believe in it, not measure it.
@@ossi.p Verification of function would help folks believe in the operation of the device, not blind belief.
@@winfordnettles3292 You can't measure something that doesn't work. The only thing that helps is faith.
@@ossi.p I have faith in things that I can verify actually work.
@@winfordnettles3292You forgot the word "not" in your sentence.
Really great work, no other way to say it 😎👍😎 I hope to rebuild this some day. If I may ask, what was the reason for choosing the silver/aluminium alloy for the rotor?
I would like to build one. I created a schematic of one of my inventions similar to this. Much lesser scale of coarse. This is Brilliant. I got to the Magnetic part but needed to figure out the electronics necessary to complement the Magnetics. My father built Motors to output 440 volts for 3 phase when I was a kid. Love this
stop doing Schematics, and start reading about thermodinamic laws and energy.... stop dreaming, money don't grow in trees, babys don't come from Paris... Santa doesn't..... OH NO SANTA DO EXIST. -----> worst than been ignorant, is been ignorant and a lier.... your inventions? similar? lol...... just do standup comedy, at lease the people will laugh at you for something that is not because ignorancy
we saw that you connected two coils in parallel and also connected the motor to them also ,but you never mentioned how you connected the other 2 coils as clearly you had 2 parallel which had led driver connected and second 2 parallel which we assume also had the motor connected ,so we are curious how those 2 x 230 circuits are connected ? if they are connected? Thank you
Красиво сняли ☺☺☺.Ждём готовую модель на Алиэкспресс.На хрена нам АЭС,ГЭС и прочий мусор 🙂🙂🙂.Да мне и на 5 киловатт с головой хватит,кароче давайте в производство запускайте быстрей.
"Это" работать НЕ может в принципе ! Законы природы обойти, обмануть невозможно ! Этот видос -- один из множества таких же иллюзионов, снятых по одному и тому же сценарию, но в разных странах.
@@user-yg5cu9bg8g да не подумай что я поверил в это "чудо".Я стебусь просто над ними.
This is the best perpetual energy machine I've seen.
here in our Village in India we have been a using similar device from past 50 years, it works only for 7-8 hours and after that we have pull the motor again. our basic needs are fulfilled using this device.
Why do you need to pull the engine?
I want to believe! But what negates the whole premise is that when the power tools are turned on (a load added), there is no temporary power output drop on the device. The water pump doesn't flinch, it keeps pumping like nothing has happened. BTW, don't you know how to use an Amp. meter? Judging from the size of the motor, the device should not generate more than 5 kW continuous. One more thing, that motor should be hot, I see at the end there you put your hand on it like it was stone cold. Anyways, kudos on the nice machining and fabrication skills, well done I'm jealous.
Truly said, so many errors to be understood
What is missing on your prototype, is a Voltmeter and an Amp. meter to be able to monitor the performance while adding loads on the unit.
I can't believe there are people who will believe that!
Lisa, in this house we obey the laws of thermodynamics
Avec la formule P= U x I pour trouver la puissance en ampères de votre installation il faut faire 20 000 / 230v = 87 Ampères. Sachant dans les tableaux électrique nous passons un fils de 25mm² pour 100A. Vos bobines de micro-ondes sont en 1.5mm² ceux qui correspond plus tôt à 10 Ampères. Ce qui ferais 230 V x 10 A = 2300 W = 2.3 kw . vous pouvez tirer plus en intensités au risque de cramé les enroulements (ne pas oublier les échauffements qui vont faire diminué le magnétisme.🧐👋 Ha j'oubliai le moteur fait 1 ch ce qui correspond à 736 W du coup 2300 - 736 = 1564 W = 1.56 KW
The idea of this magnet generator in all houses would be a great help to the energy grid.
C'est vraiment plus qu'extraordinaire. Belle réalisation. Bravo.❤
It's either induction under the table/ground or a hidden battery or a hidden cable. The "special alloy" is just punk level subterfuge. I'm not surprised that there is no explanation of just how rotating magnets through several coils makes more power than the motor consumes. It's the same grift that has been going on for decades.
Those without engineering knowledge will be fool
Very professionally produced BS but nevertheless still BS.
😂
Good show, dramatic music, cool light effects.
Best hidden external energy supply I have seen (or: not seen, of course 😅) until now in such a „motor“.
Best gag in the video is the „outdoor test“, really ridiculous but still no electric cable visible, hope they will earn enough money with this video to be motivated for producing a sequel!
🤣🤣🤣🤣🤣
Bateria może być ukryta w kondensatorze przy silniku.
The battery may be hidden in a capacitor near the motor.
@@wojciechsawicki1305
For the „test“ maybe even in the multimeter… 😄🤪
I think they made more than one of this apparatures or modified it if they built only one to make it „work“ with cable supply for the „outdoor test“, next to a bridge „in the middle of nowhere“ - I like the real funny way they commented what they showed, but the script has some flaws…
😄😄🤪🤪
YOU WANT CABLES!
THIS is a BBMM!
No cables!
Boxer Basketball Magnetic Motor!
this is very very nice work. i build machines also. id recommend locktight on the screws to keep them from backing out from vibration. matchmark to keep track. otherwise flawless! ♥♥♥
Now we have to put it in a electric car to charge it or even run it entirely without the need for battery's.
We are building on seemingly similar but with a few tweeks Outstanding.
Guys I do similar work when it comes to innovations, I will make a similar model that this guy built to have for field work, to prove to you that anything is possible if you believe enough in something and have the will... Kudos to you, I watched proudly this video and when you started the generator honestly gave me goosebumps...Regards
I also make similar generators and units can be done in many ways
Don't give up it's out there somewhere seek till ya find it
Дружище один из разработчиков таких генераторов погиб ,случайно, перед демонстрацией потенциальным инвесторам и он не один есть информация по расследованиям подобных кейсов имей это ввиду .....
No, not anything is possible. You are still restricted by the very real laws of thermodynamics.
You will be satisfied
Hi, Put a digital energy meter where you can see the voltage and current drawn and power generated.
also include the power factor and engine speed..hehe
The amount of money on top of worrying about getting killed by the us for disrupting the oil business... love your work. So clean!
If oil companies watched this they were surely laughing their asses off at you lol.
They were reading comments and were like "lol look at how stupid this guy is. What a sheep"
What I notice, is the magnets are very small, and the space between magnets are the coil is very wide. In order to get the drive motor to stay on you need to replicate the same magnetic forces that would occure if it was running. This means you need powerful magnets very close to the coils to get the same magnetic field. Not sure if you are getting that from the small magnets and the coils set here. What I think, would work better is if you have several generators hooked up to one motor. Typicaly 2 generators will have enough watts to power a motor, so you could, theoretically, have 3 generators to produce surplus power. Again this is based on theory. And using generators, or using permenant magnets to create power is not breaking the laws of thermal dynamics. In the thermal dynamics theory you would have to account for natural magnetic forces as energy input. And this will give you a good idea whether it could work or not.
Are there detailed specs available (electric motor rating, alum-silver alloy, etc..) so others can replicate this device and do more testing ?
I love. These videos ❤ Although I have built my fair share of these so-called free energy machines and NOT ONE of them work as they are described …but I do hold out hope that one day we will have a real machine with real world applications 😂💚✌️
I made something similar for my 8th grade science project. It's been running for 30 years. I gave you a thumbs up just for the work you did.
really?, then you wake up, and learned that thermodynamics laws, in this planet, can not be broken..... but don't worry, maybe in outer space work.... no wait a minute, how magnets work in space?, do you have an extension cord to reach from space to home?
@@alexiphone4132 there are multiple sources available that are far more credible than this method and many rightfully chided elsewhere in the comments
Making video of you doing something truly extraordinary openly or flauntingly is the historical equivalent to tech geniuses filing for patents, entering government contracts, then disappearing... now for almost a hundred years.
Astonishing job, Well done and keep going. 😀
Durante esta semana lo fabricare basandome en medidas estandar como los agujeros de los enchufes para hacer la estructura y el nucleo de aluminiode la misma medida…los microondas los tengo, el motor tambien y los imanes en nada me llegan asi que ya os contare
Sube vídeo contando cómo te fue, me suscribo desde ahora a tu canal y estoy al pendiente.
pudiste?
Comparte el resultado y si te funciona comparte los planos, quiero intentarlo 💪
Yo tambien quiero intentarlo
Bonjour,
Excellente réalisation... Bravo.
J'apprécie le lancement manuel avec la tirette de tondeuse.
Il manque un compartiment de quelques condensateurs pour stabiliser l'ampérage et le voltage.
J'aurai aimé voir 4 autres bobines supplémentaires et 4 autres phases d'aimants permanents.
Bonne continuation l'ami.
the hardest part about building a free energy generator is figuring out where to hide the batteries.
Your Amazing I don't have knowledge or capabilities to that I admire you Congrats
Those guy’s spending Billions bulding that Tokamak reactor for the ITER experiment should watch and learn 😂
Guys, read up first on one of the fundamental law of physics: the law on conservation of energy. Peroetual motion machine is practically impossible unless there's zero friction & heat generated.. and even so, such machine (sane output = energy input) cannot leak power to drive external devices while maintaing perpetual motion.
Those who dont fundamental Lowe
@@joshuadenman9977 It's not invented, they were discovered by Einstein & others like him. These have nbeen validated through obsevations & mathematically throught out the century by thousands of scientists. These laws also underpins practically all the technology we use today, including calculation on how much fuel & energy needed to send a rocket to space
@@joshuadenman9977 your "theory" don't work in practice, otherwise steam engine won't need coal. No point explaining to someone who's totally ignorant of physics. Anyway, go ahead & built this "engine" that yiu so believe in, and see for yourself what it does.
Does it have to be this certain type of motor you use? How much should the RPM be? Can I use a motor with more rpm and power for more electricity generation?
Energy companies will be coming after you LOL very smart to blur out the faces
This guy must be laughing his balls out when looking at all the comments and the views, probably the best troll of 2023 so far 🤣😂
You won't be saying that when you want this Tech will you.
My tip : you create 3 different little companies, one to sell the rotor as a « design lamp holder », one to sell the frame with all the cables as a « abstract sculpture » and the last to sell the motor alone. And the customer has to put 4:37 the 3 parts together under its own responsibility, so you cannot be suited for patented rights violation.
Excellent, Deployed Through The TRUTH Network… Thank You.
How can I buy this innovative project? I would like to buy a unit. What price would it have?
PROTECT YOUR IDENTITY, EVEN SKIN MARKS and your ENVIRONMENT!
I'm just a carpenter / consumer, however, Nothing gets by me! During the edited version of testing i'm closely monitoring, by vision alone, the performance (rpm) of the unit itself. As well as all the tools and devices that are plugged into it. Granted I didn't see an AC or large fridge plugged into it, however, all the items that were plugged in, I do know intimately. YES! You put a significant strain on that unit. In doing so I saw absolutely zero change in unit / attachment rpm, and/or gpm. NOT EVEN A FLICKER! Thus, beats the pants right off my brand new(because i wore out the old one) Honda EU2200i. By far in all 10 catigories. Stay the fuk down, folks! With the greatest of appreciation I thank you kindly from the bottom of my heart. Job well done keep up the good work. Carry on Soldier!
To reduce the vibration try to add rubber between the motor and the frame. And also, what if try to put all this construction inside the acrylic (or what type of glass did you use) and try to create a vacuum environment. It possibly could decrease the friction, but all parts should avoid any contact, especially parts from iron..
Probably wouldn’t want to do the rubber between the motor and the frame since he has only 1mm clearance on the rotor. It may crash since it will move some if added rubber..just an opinion. What he could do however is counter bore the mounting holes in the frame for the motor mount and use inserts they are probably nylon but have a small rubber gasket between the motor and them so it’s solid and not moving but that tiny piece of rubber “may” reduce some vibration and hence some noise. 🤷🏾♂️ just a thought. Great comment btw 👏🏽☺️
The most dangerous part of building a free energy device is having thugs from the government showing up at your front door taking your invention at gun point and threatening you to never attempt it again or you'll end up suicided because you could cause a small group of extremely rich and powerful people to lose alot of money and their grip on man kind.
The sad thing is that I dont know if youre just kidding or not, in case you arent: WTF?! "Free Energy" or any perpetual motion mashine is impossible!
@@emilemilchen Wrong.
Even though I understand the law of thermodynamics, and the transfer of energy, and it's supposed to be impossible to generate more energy than you expend in a closed system, I think that laws can be broken, and I also don't think the laws of nature are necessarily laws, more like habits, and can be assigned over time. And I also believe that our beliefs dictate our reality. And if we collectible believe it's impossible, it will be impossible, if we all believed it possible, it's is possible.
Great work. I believe it's true & possible. All seems fine except the output ! it' rather 2kW, not 20kW ! The motor or generator is too small to deliver 20000W. If it's a typo error, It'll be fine if you correct it.
Is there any material for the rotor with the same specifications and where can I buy it, so that the whole assembly would work?
"I gotta be honest, I opened this video to laugh, but once I played it and watched it for a while, something changed in me, I laughed harder than I thought"
Some First Law Of Thermodynamics enjoyer 🗿
Finaly someone who isnt stupid
bunas tardes, tendrias que dar las especificaciones técnicas del motor, longitud del conductor de las bobinas, mostrar la impedancia y la conversión, mostrar el peso del rotor, colocarle un dinamómetro para ver las RPM , hacer una escala de valores, mostrando el consumo de si mismo y con carga aparente, en necesario saber el amperaje de carga máxima que soporta y la cantidad que kilowatt hora, el método científico se hace para corroborar hechos no dichos, por mas que no tenga cortes el video no son pruebas concluyentes que el dispositivo funciona, desde ya muchas gracias por su valioso tiempo.
What gives the falsehood away is the fact there is no voltage regulation involved. There is no reason it should be 230 V instead of any other number.
a perfect 230V with no flactuation my ass,... and not decreasing! physics my ass what a dumb crowd! they actually believe free energy exists.
I admired your skills.
I'd like to buy a product.
Will it be possible?
I salute you for your efforts.
People are amazing. I would totally fund your project if I knew how
Это гениально! Это феноменально! Вот только жалко что развод!!!
Особенно улыбнулся когда перед запуском ручного был слышен чёткий щелчок пакетника за кадром!!!
Как же вам не стыдно впаривать полную туфту людям вместо полезных уроков!
они просто рубят бабло на рекламе, сняли ильм про... и сняли филки с ..
Agradecido de mostrar la forma de construir este interesante invento. Solicito compartir la lista de materiales indicando las características
Si bro, 2 veces te van a decir,espera sentado
Magnets are just to energize the stator coil.
The stator coil produces counter emf as the magnet is at the center of the coil so it will not reduce the rpm.
The rotor is made of iron and aluminum.
When rotor is facing magnetic field from the stator coil it produces counter emf back to the stator and it is much higher .
The result is high power production in the stator coil.
It can be made without motor.
I mean… channel name says it all „Hidden Technology“
In this case its a hidden cable or a hidden battery 🙂
And measuring 0V before you switched it on…. well…. 😂
He did that to show it had no external energy source fucking genious😂
It look neat, considering its the real thing, it would be interesting to include the data from the neodymium magnetic loss overtime, and maybe founding out how much energy is required to magnetize those neodymium, at this point we'll know if physics laws are broken, impressive unit non the less, you could add super cap aswell to ease the load pull
The laws of Physics were written by man, there are no evidence that its God like
LoL... when time to do test runs that last more than a second, there's conveniently grass tall enough to hide his extension cord on one side of the contraption. 🤣
I`m shure this generator work on flat Earth only
🥴🤡😆🥴earth has torus same way magnetic field is and fir every 100m you go up there is more energy which proves the toroidal field
Because globe earth is fiction. Doesn’t exist
Yes because there is only 1 earth and it is indeed flat.
Imagine thinking of a flat earth
Imagine thinking that this doesn't work because your brain is so programmed 😂😂
Beautifully constructed! I won't one...😎
Projeto muito bem feito, "mas o funcionamento e verdadeiro ? " , porque um projeto desse muda completamente a forma energética no planeta, uma máquina dessa vale muito mais que ouro.
Pois é, o único porém q eu percebi nesse projeto para uma réplica é o segredo qto ao material do rotor...e no caso do hidrogênio, a tal substância HH+...??
Do you have a set of specifications, schematics, parts list and drawing package available for people to build their own?
Nothin but silence. He won't even demo it at a university or something. Because he's a liar.
This is probably a sham.
Next on, make a big one. You can that can maintain your whole house. 🙏 Washing machine, lights, refrigerator, water heater, tv, internet...
One of the best videos I’ve watched in a long while… fantastic craftsmanship and ingenuity. Thank you!
Thanks guys for bringing this out!! ❤️ We are many who knows and understand free energy is a fact and achievable (JP Morgan who funded AND stopped Nicola Tesla where one of them/us) but are not competent to figure out and build such devices..
You are a blessing to the human collective and I’m sure you will be noticed and awarded in time. The technical knowledge of free energy must be distributed freely, as I understand is also your conviction ❤️ , but the inventors and constructors of the different technical solutions shall be awarded, -I’m sure-, when the corrupt and selfish “rulers” who have kidnapped the world are behind bars. (Which is an ongoing project as we speak 😉). Wish you all the best of all good things! 🤗
You are delusional
There's no such thing as free energy 😂😂😂😂
The magnet fixed in the rotor is insufficient to induce the magnetic induction to run at high tension, only possible for the motor to run at its best.
very nice portable generator best one I seen so far and seems most can be done at home garage but where dose one get there hands on silver aluminum alloy?
you need to make the alloy yoursef, 76% silver 975, and 24% Luminous aluminum. can say more... they are watching me.... O.O
That is amazing! how can I purchase 0ne of these? I own a nonprofit organization that helps Third World villages that have no power in remote areas and when we are out performing work and services for the villages this would be very helpful.
If true then it would change humanity.. Give it to the world....⭐🙏⭐
N probably get killed like others
Free energy doesn't exist!
@glidercoach who said that?energy is everywhere u need to be genius enough to capture it
@@abbaspourmoghadam3850
We already do capture it.
Solar panels...
Wind turbines...
We store it in dams...
Excelente proyecto, me gustaría saber que frecuencia o ciclos por segundos entrega a 1400 rpm que gira el motor propulsor, además saber de cuantos HP es el motor propulsor.
muy buen diseño, nada que decir, solo aclarar esas dudas para llevar a cabo su proyecto. Ahora, será posible colocar más imanes en el rotor y más bobinas desfasadas en 120° y poder generar trifásica. También sería un buen desafío. Los felicito por querer dar a conocer este tipo de generación limpia y no lucrar con ello. un gran saludo a la distancia.
So……. What’s the inefficiency % of that motor??? And how is the rpm restricted to 50 or 60hz?????? WE NOT STUPID! Some of us are engineers!!!
We already did that too..We are now moving forward with light bending technology that imparts air frames
update?
@@hproart7407 It will be introduced soon..
This is beautiful!!! Keep your identity and your place hidden or "They" will find you!
I’ve always believed magnetic motors were possible. I hope this is possible.
are for real lmao
Maravilloso. Muchas gracias por compartir!!!
I've had a few close calls in the past, and I've learned the importance of wearing Softgle.
I love this project, however I think it can be improved by higher powered magic magnets, snake oil for better lubrication, smegma flux for increased conductance, and a flux capacitor for time travel. 😂
Hi guys, I designed a almost exact engine around 12yrs ago but had no way of making it. The only difference is the microwave parts and i designed a larger barrel with staggered stages of magnets and coils along the barrel.
Can I suggest building a larger version with multi staged coils and magnets.
Thanks
Quiero uno
You could use used car alternators, all kinds of motors, washing machine motors. one of the engines runs on lower power than the other which produces extra power by the magnetic resonance produced and that's stored in the battery. So it's a good idea a little hard to understand sometimes. But really, every household should have a device like this for an emergency, if all the power went out. If you don't have solar or a different type of emergency power generator device. Yuppers.
is there a way of giving all of us the diagrams then for absolutely free of charge? or is it like all the other (free) energy devices that comes with a price tag attached!