Toyota Tundra ARB Compressor Install

Instagram: @beehivetundra
In this video I demonstrate how to install an ARB Dual Air Compressor. This was the method I chose, depending why type of mounting bracket and your preference of electrical wiring you may choose to do it differently, but this was my method.
In hindsight, I would not recommend running the switch power wire straight to the battery because the twin compressor has a fan that is always on if the switch is on. So this could lead to early wear on the fan and a trickle battery drain if you forget and leave the switch on.
Regarding the use of fittings and the air line, I sourced the 18” 3/8 air line, female adapter, and AN elbow fitting from my local hardware store for $20. Whereas the necessary parts (with 1/4” stainless steel braided 12” hose) from ARB would’ve been upwards of $70.
Hopefully this helps someone with their installation.

[@UnaBluRose]

Great video. My husband really enjoyed it

[@troy9834]

Don’t clean the motor before installation,, it’s always good to work in a dirty area ...., good job.... amazing

[@beehivetundra]

Exactly! Thank you

[@zachb5508]

Someone a little salty? Boohoo it isn't your truck

[@Xemantic]

I never understood useless ass snide comments like this

[@mohamedelbacbir9120]

Thank you very much

[@slingshotrentalnaplesflori2872]

great video. could you please let me know where does the bleu wire connect to its not connected to your fuse block and you have 4 black wire and 4 red wire connect to the fuse block is it for other device or am I missing something

[@beehivetundra]

Hi, good question. Towards the end I used a small red wire to extend the blue wire. So around the 9:20 mark when I am attaching the wires, the small red one is connected to the blue wire and I used a 3amp fuse on it. Hope that helps! And I have additional devices connected to my fuse block so you’ll only want to mind the ones I attach in the video with the exception of the blue/red change up.

[@SPaladin-do8jg]

lol PSA "Please vacuum your Tundra"

[@beehivetundra]

I know lol, it gets bad hahaha

[@tribunation]

Where did you get the mounting bracket?

[@beehivetundra]

I made it myself 👍🏽

[@wayned3137]

@@beehivetundranice job. Anyway you can post some templates so we can make some our own too. Thanks