4:44 I'm installing the driver's grab handle on my 2020 tundra right now and I already had M6 rivnuts laying around and used this instead of the clip. I carefully opened up the hole to 23/64", deburred, and installed the rivnut- a little more work than the clip obviously, but didn't have to go to the hardware store haha. Thanks for putting this upgrade on my radar!
Dadgummit!!! Yur costing me a ton of money....lol.....LOVE your videos. Even I can do the installs with the crystal clear instructions you give. SO appreciative!
My '06 Tundra had this, I've had my '16 Tundra for 4 years and STILL reach for that darn handle that isn't there, well it's there now! Early Christmas present from my wife, 10 minutes later boom, handle is in & looking great. If you have a newer Tundra just do yourself a favor & put this in. I just used a utility knife to make my cutout & it was fine. Thanks for the video, definitely made me more comfortable with the install.
Perfect... and, to be very honest I did not notice it until I started to watch all these videos. Very helpful and simple explanation. Easy to install. One more add-on to the list. Thanks for taking the time...!!!
@@NitroZ18Fishing where would be best place to go to get this done? I'm not much with a wrench. I've got a custom place that's real good that I've tracked down and has good rep...but don't know if he'd do this.
yea honestly any shop out there should be able to do this, and it shouldn't cost that much at all so don't let them rake ya over the coals for the install!...lol
Yepper, it’ll definitely fit…I’ve noticed a few parts that will say that…I’m guessing it’s because it technically isn’t a stock piece, hope that helps!
Where are you bought grab handle driver side toyota tundra truck.i need one I don't know where I gonna get it. I don't know what's kind of websites to use it.
I am a disabled Vietnam veteran and this is imperative that I have it to get in and out of the vehicle. Just bought a 2021 Tundra and was plenty bummed out that it did not come with the grab handle installed. Thanks so much for this video. Can I assume that it will work on my 2021? Please advise/confirm. Barry Smith
NitroZ18 Fishing, Hey, I don't see Toyota or aftermarket part numbers for these items your installing. Could you direct me to this information please? 1) Panel and Handle are 1 kit? 2) Extruded "U" nut n Bolt (did you purchased them at an auto parts store?) Great video and information, I'm going to look into this being I hate not having one on my drivers side 2020 - 1794.
Hey Andrew!… I know I have them posted somewhere here in the comments but let me know if you have trouble finding them and I’ll post the direct links for you here under your comment!… Thanks for checking out the video!
I’ve also wondered this but never been able to confirm that myself, makes no sense to me that they would leave it on the passenger side if they felt it wasn’t safe, but who knows!
Usually I would anytime I’m working around an airbag but this install is super easy and you don’t really disturb the airbag at all...you could if you wanted to be extra cautious but most don’t with this one...hope that helps!
That’s what I’ve heard, but the airbag is the same on passenger side and they still have the handle there so it makes no sense to me…I’ve heard Toyota dealers jokingly say that they took it out just to make us spend more money 🤣🤣
That I’m not sure of, I would check with Toyota to be sure...if I had to guess I don’t think it would fit, but I don’t know much about the 4Runner so I can’t be certain!
I did a little research for ya and the only company I found so far that has one for “pre-order” is ktjo4x4.com...I’ve never ordered anything from them so I’m not too familiar with them but they do list it for the 3rd Gen Taco’s...hope that helps!
NitroZ18 Fishing I actually ordered from that website after I commented on this video! Lol I pulled the trigger, it’s just so necessary to have that grip handle. Especially with these black ”leather” seats on my taco.
Got mine from Roman at Toyota of Cool Springs, it’s 2 different parts, I can post the links for ya...this is the pillar you need parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0
Just so you know, the '07 - '13 door pillar with handle will work. I took the handle out of my totaled '08 and put it in my '21; same gray interior color.
I didn’t, I guess you could to be on safe side, I did disconnect when I disassembled dash in my other video, but doing this install is very minor and you barely touch the airbag at all...wouldn’t hurt, that’s for sure!
I didn't and I don't see that you'd need to as long as you're careful. One note - I got my parts online from Sparks Toyota and the extruded U-nut and bolt were both in the box. However, they shipped with an 11mm bolt so make sure you have an extra socket handy. Kind of strange. I guess that's what was laying around the shop...
You can order them from any Toyota dealer… They may try to tell you it doesn’t fit but that’s not true some dealers are just a little more strict than others when it comes to selling parts that don’t come on the truck from the factory
What’s up buddy!...no prob, you need 2 pieces, here’s the link for the pillar parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0
yes sir, no prob...got mine from Cool Springs Toyota, link for the pillar is parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0?c=aT04NDMyNjQ1NSZyPTE%3D
Thank you!… I did not, but you can if you want to to be on the safe side… You barely touch or disturb the airbag in that area so to me it wasn’t necessary, but usually I do whenever working around a bag like that!...thanks for watching!
Thank you!...and yea maybe it’s the airbag thing, that could definitely be the case...but man I love having it, especially with being lifted...hahaha... thanks for watching!
my kit from Toyota of Cool Springs did not unfortunately...I believe if you order through Sparks Parts they will send it for ya!...and it's definitely worth it to install this handle!
Thank you!...Here’s the link for the complete set up from Sparks parts… Hope it helps! www.sparksparts.com/p-2014-toyota-tundra-grab-handle-kit-gray-pktungrabb0
@@NitroZ18Fishing damn you posted this video 2 years ago and you’re still replying, what a legend. I really want a Tundra after seeing yours and countless other videos 🤣
Hahaha…yea man I appreciate all the support from you guys, I always try to keep up with responses to help people out!…and get one, you won’t regret it!…thanks for following the channel!
The fact you have to do a cut is just ridiculous. Why don’t they just sell these cut from the factory? Also, they want almost $170 for this kit and that’s with a discount. No way can I justify that.
I totally agree, ridiculously overpriced… But I absolutely love having it in the truck… Thankfully they’ve come to their senses and they are putting it back in the next GEN…haha
4:44 I'm installing the driver's grab handle on my 2020 tundra right now and I already had M6 rivnuts laying around and used this instead of the clip. I carefully opened up the hole to 23/64", deburred, and installed the rivnut- a little more work than the clip obviously, but didn't have to go to the hardware store haha.
Thanks for putting this upgrade on my radar!
Nice, saved ya a trip! Thanks for checking out the video!
Dadgummit!!! Yur costing me a ton of money....lol.....LOVE your videos. Even I can do the installs with the crystal clear instructions you give. SO appreciative!
Hahaha...Thanks Dan!!...so glad to hear my videos are helpful, I appreciate the feedback!!
Second one I’ve installed in a Tundra after reviewing your installation video. I’m always cautious when working around an airbag.
My '06 Tundra had this, I've had my '16 Tundra for 4 years and STILL reach for that darn handle that isn't there, well it's there now! Early Christmas present from my wife, 10 minutes later boom, handle is in & looking great. If you have a newer Tundra just do yourself a favor & put this in. I just used a utility knife to make my cutout & it was fine. Thanks for the video, definitely made me more comfortable with the install.
Nice!...yea I have no idea why they removed it, it comes in handy for sure!...thanks for watching Jerome!
Exactly.....still reaching for it every time. It'll be in there soon!
Thank you for a quick, easy and painless tutorial.
No problem, thanks for watching! Glad it helped!
Perfect... and, to be very honest I did not notice it until I started to watch all these videos. Very helpful and simple explanation. Easy to install. One more add-on to the list. Thanks for taking the time...!!!
Thanks so much, I appreciate the feedback!...and thanks for watching!
Just ordered from Sparks and it comes with ALL hardware. Thanks for the video...I will be re- watching when it's delivered!
That’s awesome, I wish they all included the hardware, makes no sense to me why they wouldn’t!...thanks for watching!
wonder if the previous trucks didn’t have air bags in the a pillar and that’s why it was removed? That handles going to hurt once the airbag deploys.
Really nice job on the video, thanks for posting. Cant believe this doesn't come factory anymore. Such a bummer.
Yepper, no clue why they removed it!...and thank you, I appreciate it!
@@NitroZ18Fishing where would be best place to go to get this done? I'm not much with a wrench. I've got a custom place that's real good that I've tracked down and has good rep...but don't know if he'd do this.
yea honestly any shop out there should be able to do this, and it shouldn't cost that much at all so don't let them rake ya over the coals for the install!...lol
Where would you get the parts from?
Subbed ...in the market for a Tundra in the near future, and you have awesome educational videos for me to follow when modding!!!! 👍🏽
Thanks for the support!… If I can ever help you with anything, just let me know!… Good luck with the new truck when you get it!
Thank you for the part numbers. I have a TRD Pro that desperately needs this handle.
No prob, thanks for watching!
Great Video. This helped my dad out. His tundra is 2016 and was looking for the handle add on. Thanks for the video.
No prob, thanks for watching Brian!
Do you have a link for the parts thanks
when you order the part, why does it say "Doesn't fit your vehicle"? is it because you have to do the cut out mod? I have a 2018...
Yepper, it’ll definitely fit…I’ve noticed a few parts that will say that…I’m guessing it’s because it technically isn’t a stock piece, hope that helps!
@@NitroZ18Fishing yes thank you.
No prob!
Was there any concern about triggering the curtain airbag and maybe disconnecting the battery before, or was this not needed?
Where are you bought grab handle driver side toyota tundra truck.i need one I don't know where I gonna get it. I don't know what's kind of websites to use it.
You can purchase from any Toyota dealer!
I got mine from Toyota of cool springs website
I am a disabled Vietnam veteran and this is imperative that I have it to get in and out of the vehicle. Just bought a 2021 Tundra and was plenty bummed out that it did not come with the grab handle installed. Thanks so much for this video. Can I assume that it will work on my 2021? Please advise/confirm.
Barry Smith
Yes sir, it’ll work with the 2021!…thank you for your service and let me know if I can help at all!
NitroZ18 Fishing, Hey, I don't see Toyota or aftermarket part numbers for these items your installing. Could you direct me to this information please? 1) Panel and Handle are 1 kit? 2) Extruded "U" nut n Bolt (did you purchased them at an auto parts store?) Great video and information, I'm going to look into this being I hate not having one on my drivers side 2020 - 1794.
Did you share the link where you purchased both pillar and handle. Thanks
Hey Andrew!… I know I have them posted somewhere here in the comments but let me know if you have trouble finding them and I’ll post the direct links for you here under your comment!… Thanks for checking out the video!
What year is your truck are are these parts after market. My dealer does not have this part for a 2018 Tundra
Do you have a part number for Grab Bar? Thanks.
Thank you, great video! Want to get for my truck
No prob!...thanks for watching!...and yea, definitely worth it!
This is a great mod, but does anyone know if it is true that Toyota quit installing the handle to improve crash test scores?
I’ve also wondered this but never been able to confirm that myself, makes no sense to me that they would leave it on the passenger side if they felt it wasn’t safe, but who knows!
I say it was to save $5 per truck! Just kidding!
Do you have one of repairing broken bolt on handle of 08 tundra?
Unfortunately no, I never owned that Gen so I don't have any videos of it...I'm sorry!
do you have a link where i can buy this part?
What about that tweeter in the wind sail of the door? Is that factory?
Yepper, haven’t done anything with the radio/speakers just yet!
Great idea. I found one for Tacoma's my concern is it seems bulky. Do you notice any loss in vision out the windshield?
hey Mike!...no sir, doesn't get in the way of vision at all, not sure about the Tacoma but the Tundra all is well!...thanks for watching!
Is your windshield tinted?
Do you have to disconnect the battery to install the grab handle due to the air bag.
Usually I would anytime I’m working around an airbag but this install is super easy and you don’t really disturb the airbag at all...you could if you wanted to be extra cautious but most don’t with this one...hope that helps!
I need to find one for a 07 Jeep commander
Unfortunately I can’t help with that, I’m not sure if they sell em...but if they do they’re def worth it!
Did they stop doing this because of the side airbag? I’ve been wanting to do this but don’t know if it would matter for airbag deployment
That’s what I’ve heard, but the airbag is the same on passenger side and they still have the handle there so it makes no sense to me…I’ve heard Toyota dealers jokingly say that they took it out just to make us spend more money 🤣🤣
Where'd you buy this, Amazon?
Can it fit on a 5th gen 4runner? Interesting thst they have only passanger side but not drivers.
That I’m not sure of, I would check with Toyota to be sure...if I had to guess I don’t think it would fit, but I don’t know much about the 4Runner so I can’t be certain!
Do you have a link to where you purchased these items?
I got em from Toyota of Cool Springs, but any Toyota dealer can get them for ya!
Where did you order from? Cost?
Got mine from Toyota of Cool Springs website, it was somewhere around $150ish, give or take
A-Pillar and Grab Handle can be purchased on eBay.
oh nice!...I didn't realize that, thanks for sharing!
link?
Was this the light gray color you bought? Looked like it in the video.
Yepper, this is the gray option...thanks for watching!
Hmmm I wonder if they sell a grip handle and pillard for my 2020 tacoma. 🤔
I did a little research for ya and the only company I found so far that has one for “pre-order” is ktjo4x4.com...I’ve never ordered anything from them so I’m not too familiar with them but they do list it for the 3rd Gen Taco’s...hope that helps!
NitroZ18 Fishing I actually ordered from that website after I commented on this video! Lol I pulled the trigger, it’s just so necessary to have that grip handle. Especially with these black ”leather” seats on my taco.
I agree!...makes it much easier to get in the truck for sure!
is this a dealer part?
yepper, got it from Cool Springs Toyota!
Where do you get all the parts for this mod?
Got mine from Roman at Toyota of Cool Springs, it’s 2 different parts, I can post the links for ya...this is the pillar you need
parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0
And this is the handle itself
parts.toyotaofcoolsprings.com/oem-parts/toyota-assist-strap-746100c082b0
What about the airbag?
There’s enough room to work around it...you can disconnect negative side of battery just to be safe!
Great addition. Unfortunately on nation wide back order. Guess I’ll starting junk yards. Good video either way.
Thanks Kev!... I appreciate it!
Just so you know, the '07 - '13 door pillar with handle will work. I took the handle out of my totaled '08 and put it in my '21; same gray interior color.
Did you need to disconnect the negative cable before doing this???
I didn’t, I guess you could to be on safe side, I did disconnect when I disassembled dash in my other video, but doing this install is very minor and you barely touch the airbag at all...wouldn’t hurt, that’s for sure!
I didn't and I don't see that you'd need to as long as you're careful. One note - I got my parts online from Sparks Toyota and the extruded U-nut and bolt were both in the box. However, they shipped with an 11mm bolt so make sure you have an extra socket handy. Kind of strange. I guess that's what was laying around the shop...
Where do you get one?
You can order them from any Toyota dealer… They may try to tell you it doesn’t fit but that’s not true some dealers are just a little more strict than others when it comes to selling parts that don’t come on the truck from the factory
Hi Bro. Please send me a link so I can buy it Thanks
What’s up buddy!...no prob, you need 2 pieces, here’s the link for the pillar parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0
And here’s the link for the handle...hope it helps! parts.toyotaofcoolsprings.com/oem-parts/toyota-assist-strap-746100c082b0
Great instructional video! Easy mod. Thanks
Thanks Eric, I appreciate that!...and yes sir, easy install and well worth it!...thanks for watching!
Hi bro can you send me link were to buy it
yes sir, no prob...got mine from Cool Springs Toyota, link for the pillar is parts.toyotaofcoolsprings.com/oem-parts/toyota-windshield-pillar-trim-622200c050b0?c=aT04NDMyNjQ1NSZyPTE%3D
and link for handle is parts.toyotaofcoolsprings.com/oem-parts/toyota-assist-strap-746100c082b0?c=aT04MTkzNjgzNSZyPTQ%3D
Drivers side grab handle is the steering wheel ( works for me on my 2015 TRD off road Tundra).
Nothing wrong with that, I did that for years on my last two tundras… But I definitely prefer having the handle!
Where can I buy ?
Any Toyota dealer can get ya one!…or you can go to a Toyota dealer website and purchase online, I like Toyota of Cool Springs, hope that helps!
THANK YOU FOR THE INSTALL I'LL ORDER FOR MY TRUCK.
No prob, thanks for watching!!
Excellent video! Quick question, did you disconnect the negative battery terminal for this install?
Thank you!… I did not, but you can if you want to to be on the safe side… You barely touch or disturb the airbag in that area so to me it wasn’t necessary, but usually I do whenever working around a bag like that!...thanks for watching!
Nice vid. Maybe Toyota took out the handle bc it interfere the vision and less damage to driver if side curtain airbag deploys.
Thank you!...and yea maybe it’s the airbag thing, that could definitely be the case...but man I love having it, especially with being lifted...hahaha... thanks for watching!
Great install, great video. Thank you
Thanks for the feedback!!...glad it’s helping people out!
@@NitroZ18Fishing so the kit doesn't come with the u- nut and screw? I really want to get one for my truck.
my kit from Toyota of Cool Springs did not unfortunately...I believe if you order through Sparks Parts they will send it for ya!...and it's definitely worth it to install this handle!
@@NitroZ18Fishing thank you
no prob!
Nice! What the link and part number?
Thank you!...Here’s the link for the complete set up from Sparks parts… Hope it helps!
www.sparksparts.com/p-2014-toyota-tundra-grab-handle-kit-gray-pktungrabb0
Awesome install! Did you have to buy the pillar and handle separately or was it all one part number?
Thank you!!...they are 2 separate pieces, so you have to order them separately with the individual part numbers...hope that helps!!
@@NitroZ18Fishing helps a ton! I appreciate you getting back to me. Thank you.
no prob, happy to help!!
Great video
Thank you!!
To save $5 per truck......my 2010 had it and I miss it in my 2021!
Yepper!…such a simple yet effective piece!
Thanks for the video
No prob, thanks for watching!
Great 👍
Thank you!
Sweet 🤘
Thanks man!
My next mod !!!
Def worth it!!
Tundra is awesome but it’s asinine that they don’t do this from the factory
Agreed!…should absolutely be stock from factory!
@@NitroZ18Fishing damn you posted this video 2 years ago and you’re still replying, what a legend. I really want a Tundra after seeing yours and countless other videos 🤣
Hahaha…yea man I appreciate all the support from you guys, I always try to keep up with responses to help people out!…and get one, you won’t regret it!…thanks for following the channel!
Sparks Auto Parts has the complete kit. If you buy it online and type in Tundradude34 upon check out you will get a 5% discount.
Yes sir, Sparks will send you the hardware as well...thanks for watching!
The fact you have to do a cut is just ridiculous. Why don’t they just sell these cut from the factory? Also, they want almost $170 for this kit and that’s with a discount. No way can I justify that.
I totally agree, ridiculously overpriced… But I absolutely love having it in the truck… Thankfully they’ve come to their senses and they are putting it back in the next GEN…haha
@@NitroZ18Fishing Hopefully the "genius" that was in charge of deleting it is back to designing the Prius, where they belong!
Can I barrow your boat
where can i purchase?
Great video
Thank you!!