How To Remove Rust with Rust Dissolver & Protect It with After Blast - Eastwood
ฝัง
- เผยแพร่เมื่อ 14 ก.พ. 2017
- The guys at Eastwood show you how to chemically remove rust and keep the metal clean until you paint it.
Get Rust Dissolver: www.eastwood.com/rust-remover-...
Get After Blast: www.eastwood.com/ew-after-blas...
Eastwood Rust Dissolver removes rust without metal-eating acid. Our acid-free Rust Dissolver removes only the rust, and won't eat-away at the metal itself. Leaves the newly de-rusted metal ready to paint, plate or powder-coat.
Acid-free
Gentle enough for engine parts
Reusable
Removes about 5 sq. ft. of rust per quart
It will penetrate deep into the metal dissolving the rust in a few hours. Leaves metal ready to paint, plate or powder coat. So gentle, it’s suitable for engine parts and is harmless to copper, brass, aluminum, solder, lead, plastic, rubber, seals, wood, and vinyl. Will not remove sound paint.
Liquid rust Dissolver works as long as the surface is wet. Items that cannot be fully immersed due to size can be placed in the discharge stream of a commonly available small pump. One gallon de-rusts about 20 square feet of metal. The gel adheres to vertical surfaces and dissolves rust without having to submerse the metal in a tub or bucket. Ideal for quarter-panels, fenders and other vertical surfaces.
Use "After Blast" after blasting or sanding metal, then paint, prime or powder-coat.
Spray, wipe and repeat until clean
Aqueous cleaners and phosphoric acid clean and etch the metal
Zinc phosphate coating improves paint, primer or powder adhesion
Also protects against flash corrosion
After Blast cleans, degreases and etches just-blasted or newly-sanded metal to improve adhesion for painting, priming or powder-coating.
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between. - ยานยนต์และพาหนะ
![[TH] VCT Masters Shanghai Playoffs DAY 5 // 100T vs PRX | FUT vs TH](http://i.ytimg.com/vi/q75pv359eP4/mqdefault.jpg)
The main header picture on this video has a shot of you cleaning a truck frame getting the rust off....Where is this footage?
Great stuff! I can really use these products!
I use the $4.89 2 gal carton of white vinegar from Costco for surface rust removal.
Nothing but phosphoric acid with an incredible mark-up.
2 questions actually
1- would you recommend the same process with surface rust on sockets and wrenches?
2- can this process be used as spraying on underside of my truck?
Which will be the best to remove rust on iron railings still with paint on?
Hello I have acquire a older 2005 truck there is some rust on the truck because it is from northern are. I had the truck sp[ray with oil, however I think I should do more, you think I can undercoat now what should I do to best stop the rust, they drilled holes in the doors tailgate etc and spray inside anything else I can do ??
True question could you put the rust dissolve in a pump sprayer and keep the area wet for and hr or so and would you see results??
Rust dissolver is designed to work over a longer period of time. Overnight is all you'll need in most cases. We recommend either submerging your parts in a bath, or you can brush the gel on and cover it with some saran wrap.
For quicker results, check out our Fast Etch.
@@eastwoodco i already use the fast etching product absolutely love it!!
Would the liquid form be safe in common plastic containers? At the extreme end, I wonder if somebody could fill their cooling system with this and let it sit to clean everything. lol
what if you have a part with just a small rust spot on a painted item could you use this without stripping the item
Can this product work on imports. i here the metal on Honda’s from the seventies will destroy that type of thinner metal.
What's up with the gray medal finish?
Won't used transmission fluid work as good?
Whats the difference between After Blast and Fast Etch ?
With the phosphoric coating left behind , can I TIG/MIG weld it?
+Steve Friedlander I have had no issues welding over a dried Fast Etch coating. I am a retired ASE Master tech and the 150A MIG I bought in 1984 works great using smaller gauge wire (0.30") on sheet metal lap-joints, plug welds and off-set flange joints I had sprayed with Fast Etch. I believe the remaining phosphoric coating is very thin film and presents not problem during welding. I do recommend a "Weld-Thru" spray coating on top of the Fast Etch (On the weld area & above - where heat transfers to) that helps prevent future rust. If I can get to the back side, I will spray a cold galvanize (CRC), then I will coat with a special spray gun / long hose setup w/tips, using a 3M type thin oily rust proof material inside the panel when done. When the rustproof material sets up & dries, I will wipe off anything that drips out drain holes / overspray with "Pre Clean" before painting. Lacquer thinner or Acetone will work also, but always use a proper Pre Clean product & tack rag before filler, primer or anything else goes on. It is amazing how many videos show metal repair on high dollar project cars & trucks, but they never talk about or show rust proofing inside as welding by nature accelerates the rusting inside and next to the joint. Just using a belt & suspenders approach in the rusty Midwest.
I restore old farm implements and need something that leaves the paint on but takes the rust out. Will this work?
Oxalic acid
so how much does it cost for enough to submerge that header?
I would like to know if this can damage finishes? I have chrome wheels that have rust on them and would like to clean them off
Don't use this product on chrome wheels.
Can after blast be used just as a rust preventer? Or does it just have to be used after removing the existing rust
Here's some more detailed info: www.eastwood.com/eastwood-afterblast.html
Link is dead 6/17
How about a rusted cast iron manifold that hasn't been worked on?
At 14:08 why did it remove the rust from only half of the piece? Is that rust on the right, or something else?
Go to a Chemical Supply House and explain that you are removing iron oxide from a surface. They will be able to mix an acetic acid solution for a lot less money than these products. Vinegar has 0.4 percent acetic acid by volume. A 10 percent by volume acetic acid mix will do fine to remove rust from most surfaces. I used this mix to remove rust on small window panes and their steel framework in old school welding shops and foundries back in the day. Was done yearly to improve light level in those shops. Was more cost effective than replacing hundreds of small window panes. Applied with brush or sprayer you could see the rust dissolve from the framework and glass. Washed solution and residue off panes with ammonia. Then a final rinse with a water hose. Have used same acetic acid solution on sheet metal rust followed with an ammonia rinse and had good results.
I need this for my G-body frame!...
Can I put this in my quad bikes fuel tank?
maybe instead of mentioning it was applied around lunch, you can say how long it's been in. because I'm watching this vid in July 2017 and that would seem like a long time since that was lunch in February.
It soaked for a few hours or less.
thank you
He said a little before 12
They are live at 3 every mon, tues, wed.
So that’s around 3 hours.
Common sense dumbass
He is a funny guy.
Which product do I use if I want to spray underneath my truck that is Rusted just spray it all over everything underneath the truck and pressure wash it off which product would work if any??????????
Have you considered Rust Encapsulator or Rubberized Rust Encapsulator which combines encapsulator and undercoating? Here's a link and you can also contact an Eastwood Tech to discuss the project in detail to make sure you get the right tools. 800-343-9353 - www.eastwood.com/eastwood-black-rust-encapsulator-paint-over-rust.html
I want the Eastwood rust remover gel is there a place in Knoxville Tennessee that I can get it or do I have to order
Can you use this rust dissolver in your Parts Washer 20 gal?
does it work on chrome?
Use coke cola
Why would you want to encapsulate rust
ok i wan puting me semi truck in conteiner to clean rusting
jose guzman u wut m8, English?
so I have to dunk my truck in a bath?
Just drive it into a pool of this.
If you have to do a dunk. It would be for a total restoration job. If you have missing metal, you can buy parts such as rocker panels, floor boards, and miscellaneous parts.