Latrax Prerunner Suspension Arm Upgrade

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ย. 2024
  • In this video I install the Hobby Park Aluminum Suspension Arms. Make sure to have Loctite Blue Threadlocker on hand so your screw wont back out.
    Link to everything used:
    Traxxas Latrax Line:
    www.hobbytown....
    Loctite:
    www.amazon.com...
    Dynamite Startup Tool Set (Traxxas Vehicles):
    www.hobbytown....
    HobbyPark Aluminum Suspension Arm Set:
    www.amazon.com...
    Harley Designs TH-cam Channel
    / harleydesignsinc
    #4x4 #axial #axialracing #crawler #mallcrawler #offroad #prerunner #proline #prolineracing #radiocontrol #rc #rc4wd #rc4x4 #rccar #rccars #rccrawler #rchobby #rclife #rcoffroad #rcscale #rctruck #rctrucks #rockcrawler #scalecrawler #scalerc #scx10 #tinytrucks #traxxas #trx4 #vanquishproducts

ความคิดเห็น • 27

  • @Why...So...Stupid...
    @Why...So...Stupid... ปีที่แล้ว +3

    I got some hobbyfire ones off Amazon, green aluminum. I kept breaking the plastic ones. So far, so good. They seem to make the suspension feel stiffer, but it drives the same. I did use loctite on the screws. I just put a 5200kv brushless motor and esc, now the differentials are clicking a little. Gonna have to shim them. It does wheelies now when it takes off. Parts are cheap on these, makes it nice for beginners like me.

  • @FenrirFire18
    @FenrirFire18 10 หลายเดือนก่อน +1

    Just ran mine in the cold and the arm broke instantly when it grazed my car tire. Oh, well. Heard they break often, so I bought a couple pairs of the Traxxas S. ARMS. Will just fix when I get home and look for these upgrades too, when I have time.

  • @Shadows-RC
    @Shadows-RC 10 หลายเดือนก่อน +1

    It puts the lotion on it's skin, or else it gets the hose again.

  • @gamercat7004
    @gamercat7004 ปีที่แล้ว +1

    I have the hobby park a arms as well but I lost few screws on it and I ended up putting the stock a arms to have my latrax prerunner going. I need extra hardware to put back to install the a arms on again.

    • @rcxventures
      @rcxventures  ปีที่แล้ว +1

      Did you add blue threadlocker

    • @gamercat7004
      @gamercat7004 ปีที่แล้ว +1

      @@rcxventures I believe at first I didn't but I noticed the screw was getting loose and I did apply blue thread locker and then I saw it was gone.

    • @rcxventures
      @rcxventures  ปีที่แล้ว +1

      I recommend it on all metal to metal parts unless it articulates

    • @gamercat7004
      @gamercat7004 ปีที่แล้ว +1

      @@rcxventures yes indeed I noticed the front ones having play and the steering on my latrax prerunner is unpredictable and very sensitive when acceleration.

    • @rcxventures
      @rcxventures  ปีที่แล้ว

      @@gamercat7004 Are you racing on the street or dirt