WHEN TO ACTIVATE HYDROGRAPHIC FILM | Liquid Concepts | Weekly Tips and Tricks
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- Bryan from Liquid Concepts showing you the best tips and tricks for all your custom coatings including hydrographics, cerakote, custom painting, water dipping, water transfer printing and much more!
In this episode of our weekly tips and tricks video, Bryan goes over when to activate your hydrographic film, he gives a wide range of times for examples on what will happen with each individual time!
Be sure to subscribe and like our page for weekly tips and tricks to help better yourself and the coatings you use!
Check out our Liquid Concepts Distribution Facebook page for more tips and tricks as well as sales and promotions that we run all the time! - / liquidconceptsdist
Be sure to join our Hydrographics 101 Facebook Page to get all the questions answered relating to anything in the hydrographics or custom coatings industry! Tons of professionals and DIY people alike have a great time and learn everyday from questions and answers on this page - / 871687239546498
Visit our website for all your hydrographics needs from film and activator to paints, neons, custom film, training, equipment and much more - www.liquidconcepts.com
WHEN TO ACTIVATE HYDROGRAPHIC FILM | Liquid Concepts | Weekly Tips and Tricks - แนวปฏิบัติและการใช้ชีวิต
One more good video! Thank you man! I hab those tiny lines mostly in the black parts of a digicamopattern i used to dip my airsoft m4
Thank you friend for sharing good videos good tips very good your channel greetings from Mexico 👍👍💪💪💪
Thanks for the tips 💪🏽🔥🏁
Any time!
Thanks for this video. Once the activator has been sprayed how long do i generally have to dip the item.
Thanks.
what is the psi setting? and are all your gun setting set to open all the way? this is so I can get a general idea when I test your film before using a large piece.
Thanks for the great videos! Do you have any videos on , after activating your carbon filter the lined designs wave? I’m getting a good activation amount, I’m getting a good solid dip , but after I activate my lines start to wave on the water. I have tried turning the air pressure down. I have tried raising the gun further from the water.
Carbon fiber film*
What kind of table do u use for the film to cut on
Great video.. any tips on what to do if my film starts to roll as soon as I put it in my tank?
Do you mean the edges are rolling up? You can always tape the edges and then put slits in it to allow it to expand still
How many PSI do you apply your activation to? Thanks
Can you show a video of after dipping like rinse and dry and when to clear coat.
Hi James we do actually have a video on rinsing after the dip th-cam.com/video/E-hgEFBJVxQ/w-d-xo.html
Does using tape on edge effect the dip. Some people say the film needs to sink to rap around the product and having tape on it will cause the film to stretch and not sink. is that true.
me gustaria que fueran traducidos al espa;ol
I've been having some issues with my dipping, my film follows me like a blanket and doesn't react like it should, is that over or under activating?
Tanks temp sits right on 32°c
Activator spray gun pressure sits at 0.8 bar, using my thinner film letting it sit for 60 seconds, really dont know what I'm doing wrong.
John it is hard to say without more information or photos. Could you email me with more information and possibly photos/videos and I can troubleshoot with you? info@liquidconcepts.com
What if happens if you let it sit too long before activating
I have a question. When attempting this for my first time the film stayed sticky and never felt dry. What did I do wrong?
You didn't rince it bro
@@johnbell3816 yep u are correct lol
is it better to wait 90 sec just as a general rule?
Typically it's a 60 sec soak time before activating on most films
Por favor lo pueden traducir en español gracias
Sorry, we do not have a way to do that.
Help me
You don't need help. You got this !! Practice, practice !! Oh, and a little patience thrown in !! lol
ممكن رقم جوالك