Your tips are absolutely invaluable! I am just getting started and watching your videos helped me identify lots of mistakes I made and understand what went wrong. Now I will have to verify if I have the right understanding of my mistakes :P Hopefully I will soon be able to finish my friend's SIG 550 furniture!
Great video for newbies. I am beyond this point myself but I definitely remember the struggle of perfect activation. Almost gave up on it but I stuck with it and with help of videos like this one day it just happened and I was dipping. Glad I stuck it out
Activation is the most frustrating part to learn and I definitely remember all the struggles I went through. I threw a lot of parts across the shop in anger and frustration. Just takes practice and I am glad you were able to figure it out. Thanks for checking out the video.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
I just stumbled upon your videos, and absolutely love them. Thanks so much for the tips. Love the bloopers too. They are really funny, I can't stop laughing. Thanks for including them in your videos.
The blooper thumbs up made me hit the thumbs up button. I was subscribed already. Thanks for putting out this information, I am about to start hydro dipping in a few weeks. Your vids help me a LOT.
I wondered why some of my dips seemed faded or washed out compared to others even though the film adhered. Over activation. Another great video ATF. Just the tip baby. Lmao.
So if I was to order enough stuff to do a large gun stock like you had how much hydro film would I need and what else would I need? And how much is all this costs? Also what temperature should your dip water be?
Price depends on what film you buy and where you buy it from. I always order a minimum of 3 meters for all projects so I know I have enough for re-dos if needed. 90-92 degrees at the surface of the water... we just did a video on water temps if you want to check it out.
I just got some film from ali x press. the seller rolled, then folded the film and shoved it into a 4x6 envelope... Its wrinkled. Is it garbage now? will the wrinkles come out when hydrated?
When dipping a rifle stock and you have one side done can the tape be applied to the recently dipped side right away with no rinsing, or should it be rinsed and dried
I have a plastic gun stock that comes apart in two halves. I am dipping it in a desert digital film. Should I dip it as a whole or dip each half separately??
So I have a question if you could help. I print my own designs on hydro film. And alot of the time the picture spreads too much and doesn't come back to original size when in water and after adding activator. Also is their a way I have to prep what I'm dipping. For example I'm trying to make my own design on my ps5 controller but when I dip the color sometimes slides off like it's running and not sticking to the surface it especially comes off when I'm trying to rinse off what's left over of the film. Please help I hate wasting so much time and money. Thank you
I don't understand why you would teach people your craft, but that being said, thank you for taking the time to help us DIY'ers. Just subscribe, and getting ready to binge watch your channel.
I love your videos. I am just getting started out and would like to make a business out of this. Your videos have been a big help but I think I will definitely be subscribing to your online training. You have definitely inspired me to step out of my comfort zone. Thank you.
Thanks Nathan, glad to have you and appreciate the kind words. The online training will definitely help you. The business elite class is very insightful and will show you all the in's and out of the business and get you well on your way to making some money.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Thanks for checking out the video, we have many more great info videos coming soon and you wont be disappointed. Give the OHW do it yourself kit a try, it works great. Link for 5$ off in the description is just an extra bonus!
@@shockwave6416 It is prefered to sand blast. You can use a scuff pad but sandblasting is much easier and more consistent. We will have a full video on prep work soon.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Like I don’t have enough hobbies. Good job on the videos. At first I was like...I wish they guys were local..and then I realized I would be broke from Hydrodipping everything I own.
LOL, that a fairly accurate assumption. I have had a few local wives call the shop and be like "you know we are broke, why do you keep dipping his stuff knowing we cant afford it" Well mam... I am not gonna turn down a credit card payment because you don't agree with your husbands spending habits lol.
Not sure what you mean by tools, can you be more specific? The vinyl stencil material is Avery Denision high heat vinyl, same stuff we use for cerakote.
Hi from the UK. I've just stumbled on your videos & I have to say that they are the most informative 1s I've come across! I've been toying with having a go at this for a while,but never really felt comfortable for some reason? But after watching a few of your videos,I feel more confident in having a go. I just wish I could get all the things needed from the companies you mention? There's not to much help over here,in finding what I should be getting etc? I would really love to make something special for my beautiful granddaughter & I know she would love to have a go too! I want to thank you for your very informative videos my friend & I truly hope I can get up & running without too many issues etc? Wish you lived by me,as I'd be picking your very knowledgeable brain constantly! Lol. Keep doing what your doing my friend & ill be sure to watch all your videos,including the spray paint 1s,as I like the idea of that too. Thank you again. Stay safe mate.(sorry for going on a bit!) Tc
Seems like the spray can isn't the best way to apply the activator? My guess is smaller droplets would provide more consistent coverage without disturbing the pattern?
That figures. I appreciate your DIY videos. I am now convinced that I would be better off having a professional dip my replacement butt stock for my Mossberg 930.
So I'm having a problem where either it's really slimy and takes forever to wash off and bits an pieces come off or the whole thing starts to crumble off walmart white paint on metal that's been sanded down to 120 grit
Question :....When dipping a "taped off project" ...for example taping of a gas tank or fenders ect . for flames , and only wanting the pattern to appear in the flame , Do you have to score around the masking tape before removing to prevent damage to the area intended for the pattern ?
I'm a little late to this video but it definitely helps. I'm still having so much trouble get the right amount of activator. Its either too much or not enough. Its getting frustrating.
Anybody debating the one hit wonder stop it’s amazing get it my only regret is not getting more colors I’m a complete nood when it comes to dipping and spray paint in general and even I can tell it’s some quality stuff
it will go onto rubber but it will not stick for very long! Rubber and silicone are some of the things I do not dip because it will not stay stuck to the surface.
Morning,sorry to be stupid I have watched a load of you tube videos how to spray paint & you always spray from the inside & now this new way of painting its from the outside so I am thinking that you took the over spay film off,I am just getting good @ spraying a rc car bodyshell the you change it all lol lol lol cool video.thank you Andy timson from England
We covered both those topics in previous videos. Here you go, check these out: th-cam.com/video/EzWYBRqhwh4/w-d-xo.html th-cam.com/video/aLUUgl-TMVE/w-d-xo.html
I got questions first let me say this was so helpful a cd I know I'm all late but 1st question do you need to use activator if you are just working spray paint not the film and other question is in working with tumblers and would like to know how to cover the whole cup in 1 take. Thank you in advance
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Hello, I am new to hydro dip film and was wondering how do you figure out which side of the film you should lay touching the water and which side faces away from the water?
Thats easy.. lick your finger and stick it on the film... which ever side sticks to your finger, thats the side that goes on the water. I know it sounds crazy but it is the easiest method and I do it every time I cut a piece of film. Just becomes habit after a while.
Today was my first attempt at this art. I dipped a wooden skate board blank. It came out pretty good. A few small imperfections but overall I was tickled to death. I rinsed it off for what seemed like forever then pat it dry. About an hour after that, I applied Rusto Oleum Acrylic Enamel clear over it. About 30 mins later the entire board was a mess. The Clear cost reacted with something and caused the print to crack and blister up. Any Suggestions?
Best tip ever.... stop using a paints that are not designed for hydro dipping. Switch to OHW or a hydro dipping paint and clear and those issues will go away.
Hey do I have to spray the object with water to clean the film off right after I dip it or should I let it dry before I have to clean it. I’m asking because I just dipped a p90 body and while I’m rinsing it I’m seeing it come off however it’s not bad and I quit rinsing so I guess my question is what the fuck do I do?
Yes it needs to be rinsed right after you dipped. If the sip is coming off when rinsing then you messed something up: either didn't use the right paint, waiting too long after painting and the paint is now cured, or you didn't activate right.
Hi! Great series of tips! I have a question: can hydrodipping be done on a textured surface? I have a plastic engine cover I'd like to do, but it has a textured finish that would be difficult to sand smooth.
I am new to hydro dipping can I use just spray paint and a tub and spray my paint in the water then just dip it or do I have to use a activator. If it just spray paint.
I do not do the spray paint dipping so I am not an expert in that area. I know that the people who use the spray paint do not use activator they just spray the paint on top of the water.
I’m having issues where my film is wrinkling, not when placed or activated but around the item I am dipping during the dip, then drying with raised creases or ripples on the item. Any idea what is causing this or how to fix it?
If the film in wrinkling as your dipping then you either have bad film or you are not activated enough. Film can go bad if it is not stored properly. It needs 40-50% humidity and 70 degrees.
@@sparklinmommaglitters553 if your going to do that then use intercoat clear. OHW sells it. Its just a clear paint that is dippable. Scuff your epoxy, spray a few coats of intercoat clear, dip, and thrn clear coat like normal.
@@sparklinmommaglitters553 no problem, got a video coming on using intercoat very soon. It works really good, and don't forget to use that link to OHW in the video description for 5$ off your order.
I do not make films, I buy them from companies already printed. Good luck finding out how to do it yourself, from what I hear it is insanely expensive and the companies that print it do not give up the info on how they do it. Not worth the headache or expense in my opinion.
Good evening from Greece!New follower and i really want to learn this procedure!Your videos are very helpfull.Is the shop on the link yours?Thank you for your time!!
Welcome. Yes the link is mine but I do not sell any products, you would need to find someone in your country that can import it for you because none of the companies in the states ship overseas. If you want to learn more then you should check out our online training on Patreon. www.patreon.com/ATFhydrographics
I air brush once every few months for a project and always refer to this video for a reminder on how to be clog free. Thx so much for it!
Your tips are absolutely invaluable! I am just getting started and watching your videos helped me identify lots of mistakes I made and understand what went wrong. Now I will have to verify if I have the right understanding of my mistakes :P Hopefully I will soon be able to finish my friend's SIG 550 furniture!
Great video for newbies.
I am beyond this point myself but I definitely remember the struggle of perfect activation.
Almost gave up on it but I stuck with it and with help of videos like this one day it just happened and I was dipping.
Glad I stuck it out
Activation is the most frustrating part to learn and I definitely remember all the struggles I went through. I threw a lot of parts across the shop in anger and frustration. Just takes practice and I am glad you were able to figure it out. Thanks for checking out the video.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
@@kaywoodparsons1874 can't buy xylene here in California
They banned it a long time ago.
instablaster
Im trying to do some hobby dipping thanks for the tips i will be following along
Can't get enough of your videos. Learning to do this for a hobby and you have greatly helped reduce my brain fart curve....
Excellent. Best video explaining the most frustrating part of dipping
Thanks
Awesome, glad you enjoyed it. Many more educational videos to come.
Do you have any videos about scuffing/prepping the surfaces of different materials ? If so you should make one !
I just stumbled upon your videos, and absolutely love them. Thanks so much for the tips. Love the bloopers too. They are really funny, I can't stop laughing. Thanks for including them in your videos.
Thanks for checking out the videos. Glad you are enjoying them .
Please am in Nigeria how can I get the kits without been scammed
The blooper thumbs up made me hit the thumbs up button. I was subscribed already. Thanks for putting out this information, I am about to start hydro dipping in a few weeks. Your vids help me a LOT.
I wondered why some of my dips seemed faded or washed out compared to others even though the film adhered. Over activation. Another great video ATF. Just the tip baby. Lmao.
Glad I could help. Just the tip.
Hey can I use this kinda paint on my.
BBQ pit? I Saw it's in spray
On the trailer part. Not the actual pit I used an inderstal black on that.
Very helpful! Thanks for this!
As a DIYer I love the bloopers!
So if I was to order enough stuff to do a large gun stock like you had how much hydro film would I need and what else would I need? And how much is all this costs? Also what temperature should your dip water be?
Price depends on what film you buy and where you buy it from. I always order a minimum of 3 meters for all projects so I know I have enough for re-dos if needed. 90-92 degrees at the surface of the water... we just did a video on water temps if you want to check it out.
I just got some film from ali x press. the seller rolled, then folded the film and shoved it into a 4x6 envelope...
Its wrinkled. Is it garbage now? will the wrinkles come out when hydrated?
When dipping a rifle stock and you have one side done can the tape be applied to the recently dipped side right away with no rinsing, or should it be rinsed and dried
rinse and dry. th-cam.com/video/Ub-gxf2rufI/w-d-xo.html
I have a plastic gun stock that comes apart in two halves. I am dipping it in a desert digital film. Should I dip it as a whole or dip each half separately??
Thanks for this, just did my first few test runs and I definitely over activated
Keep practicing, it takes some time to get used too.
@@AllThingsFunHydrographics oh I will I'm a bit of a perfectionist 😅
Your videos are a massive help for a newbie 👌🏼
I What to start at home for myself. Is is there a beginner's kit
OHW sells some diy kits on their website ohwpaint.com
So I have a question if you could help. I print my own designs on hydro film. And alot of the time the picture spreads too much and doesn't come back to original size when in water and after adding activator. Also is their a way I have to prep what I'm dipping. For example I'm trying to make my own design on my ps5 controller but when I dip the color sometimes slides off like it's running and not sticking to the surface it especially comes off when I'm trying to rinse off what's left over of the film. Please help I hate wasting so much time and money. Thank you
Do you also need to do it for spray paint only? I’m not using a pattern.
I don't understand why you would teach people your craft, but that being said, thank you for taking the time to help us DIY'ers. Just subscribe, and getting ready to binge watch your channel.
Just trying to help since there is not a ton of good info out there.
Because 99% of people won't do anything about it or even attempt it.
Thank you bro! I got the OHW DIY kit and have done exactly what you described in this video, I screwed up. Thank you for the help
I love your videos. I am just getting started out and would like to make a business out of this. Your videos have been a big help but I think I will definitely be subscribing to your online training. You have definitely inspired me to step out of my comfort zone. Thank you.
Thanks Nathan, glad to have you and appreciate the kind words. The online training will definitely help you. The business elite class is very insightful and will show you all the in's and out of the business and get you well on your way to making some money.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Thanks for the bloopers!
Ha ha, glad you enjoyed them. I put them at the end of every video so everyone can get a laugh at me.
I wish someone did it around where I live, I really want to have a couple of ARs hydro diped
email me, I have tons of people I can refer you too that may not be too far away and you can always ship. chris@atfhydrographics.com
Amazing channel, so helpful for me as a beginner! Quick question if I was dipping something concave like a bowl what angle should I dip at?
Will the paint color under show through carbon fiber pattern
Thanks,going to try a few projects soon. This was very helpful. I'm brand new to hydro dipping. Lots to learn.
Thanks for checking out the video, we have many more great info videos coming soon and you wont be disappointed. Give the OHW do it yourself kit a try, it works great. Link for 5$ off in the description is just an extra bonus!
@@AllThingsFunHydrographics do you have to sandblast parts first?
@@shockwave6416 It is prefered to sand blast. You can use a scuff pad but sandblasting is much easier and more consistent. We will have a full video on prep work soon.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Can you use the under activated as background for a correct activation art?
Like I don’t have enough hobbies. Good job on the videos. At first I was like...I wish they guys were local..and then I realized I would be broke from Hydrodipping everything I own.
LOL, that a fairly accurate assumption. I have had a few local wives call the shop and be like "you know we are broke, why do you keep dipping his stuff knowing we cant afford it" Well mam... I am not gonna turn down a credit card payment because you don't agree with your husbands spending habits lol.
Greetings from South Africa -- love your videos.
Is there any way that you can salvage film that has sank
What are some of your tool that you use for dipping pieces, as well what is the yellow stencil adhesive paper you use?
Not sure what you mean by tools, can you be more specific? The vinyl stencil material is Avery Denision high heat vinyl, same stuff we use for cerakote.
Love your videos,I just want to know what temperature is it to be when starting.thanks
Hi from the UK. I've just stumbled on your videos & I have to say that they are the most informative 1s I've come across! I've been toying with having a go at this for a while,but never really felt comfortable for some reason? But after watching a few of your videos,I feel more confident in having a go. I just wish I could get all the things needed from the companies you mention? There's not to much help over here,in finding what I should be getting etc? I would really love to make something special for my beautiful granddaughter & I know she would love to have a go too! I want to thank you for your very informative videos my friend & I truly hope I can get up & running without too many issues etc? Wish you lived by me,as I'd be picking your very knowledgeable brain constantly! Lol. Keep doing what your doing my friend & ill be sure to watch all your videos,including the spray paint 1s,as I like the idea of that too. Thank you again. Stay safe mate.(sorry for going on a bit!) Tc
Check out Hydro Style UK, they have a lot of the products you need and can help you out.
Seems like the spray can isn't the best way to apply the activator? My guess is smaller droplets would provide more consistent coverage without disturbing the pattern?
Spray gun will always be a million percent better than spray cans.
That figures. I appreciate your DIY videos. I am now convinced that I would be better off having a professional dip my replacement butt stock for my Mossberg 930.
If I wanted to dip something in carbon fiber and it's a flat black base, will it turn out ok or will I need to spray it a lighter base?
What do you put the activator in. Can it be a spray bottle?
No spray bottles, use a hvlp gun. We have a video on how to spray activator with a spray gun.
So I'm having a problem where either it's really slimy and takes forever to wash off and bits an pieces come off or the whole thing starts to crumble off walmart white paint on metal that's been sanded down to 120 grit
Question :....When dipping a "taped off project" ...for example taping of a gas tank or fenders ect . for flames , and only wanting the pattern to appear in the flame , Do you have to score around the masking tape before removing to prevent damage to the area intended for the pattern ?
I always score the tape before I pull it just in case. Makes getting sharper lines much easier.
Loving this channel. Have you had any experience with dipping leather?
So, if you mess it up, how to easily clean ABS to retry?
You guys make this look so easy 🙈 I’ve tried few times , came close and still failed lol
it takes lots of practice. I didnt become good until I got lots of hands on training and about a year of practice.
Great video Chris! Everyone should watch it
Thank you Terry, glad you enjoyed it. I wish everyone would watch it... that would be awesome!
I'm a little late to this video but it definitely helps. I'm still having so much trouble get the right amount of activator. Its either too much or not enough. Its getting frustrating.
Anybody debating the one hit wonder stop it’s amazing get it my only regret is not getting more colors I’m a complete nood when it comes to dipping and spray paint in general and even I can tell it’s some quality stuff
AMEN, Preach it brother!!! Love some OHW man, its good stuff.
can i use thener as activator?
Hey does montana black work?
What is that spray material?
can you apply rubber like the inpack makita
it will go onto rubber but it will not stick for very long! Rubber and silicone are some of the things I do not dip because it will not stay stuck to the surface.
where can I get that ghost skulls camo? love it!
Is it possible for the film to go bad? I have some that when I lay it in the water, it does not seem to absorb it. It still shows wrinkles.
Hi, I was wondering if you ever have done a fishing rod?
Subscribed. Getting into this for firearms. Will definitely come back for tips.
Awesome thanks for the sub! Hope you enjoy some more of our videos.
@@AllThingsFunHydrographics where can I sign up for your online training
Can we use laquier instead of activator ?
What temp does the water have to be ?
90F
Can you please show us how to dip a rim was thinking of doing my motorbike rims
When I get some in I will, I do not do rims very often because they are really expensive to dip.
You have a video of how to prep the object first? Before diping
Is it possible to do the exhaust?
Move left to right.. proceeds to go from right to left lmao
Thank you for the knowledge I cant wait to try this
My left or your left? I get confused.... cant help it, I went to government school.
Loved the video but the bloopers got me to subscribe! 🤣
LOL. Everyone loves the bloopers so we include them in every video. Thank you so much for the sub, I appreciate it.
We’re did you get the big tub of water
Love the painting you did on the boat.Whats the average price to dip a shotgun
Thanks WC. Pricing is all depending upon which gun its going on and what pattern is being use.d. Email me for a free quote chris@atfhydrographics.com
Great explanation..... Tks......!!! can we make activator own by using chemical...??? can you advise about that.
I have never tried to make my own activator but I have seen a lot of videos on youtube and people have done it.
Hell ya! Great info Chris! Thanks!! This is really gonna help me figure out what I'm doing wrong.
Awesome, glad I could help. Thanks for watching and we got many more coming soon with tons more info.
im enjoying playing around with it
Always fun to play around with it.
Morning,sorry to be stupid I have watched a load of you tube videos how to spray paint & you always spray from the inside & now this new way of painting its from the outside so I am thinking that you took the over spay film off,I am just getting good @ spraying a rc car bodyshell the you change it all lol lol lol cool video.thank you Andy timson from England
How much do u charge to do a slash body
big fan of you .i'm just wanna know if there is any available video showing us how to deal with a bike full process dipping
Thanks for checking out the videos. We do not have a video on doing bikes yet, but will in the future.
@@AllThingsFunHydrographics
thanks a lot can't wait to see that my regards from Egypt .
Are those level 4 plates?
Can I clear my part before I dip it to protect it ? What do I need to do to prep. it if any?
We covered both those topics in previous videos. Here you go, check these out:
th-cam.com/video/EzWYBRqhwh4/w-d-xo.html
th-cam.com/video/aLUUgl-TMVE/w-d-xo.html
After spraying activator how long should you wait before you dip an item
Depends on the activator, some its 10-15 seconds, some is 20, some are 30
I got questions first let me say this was so helpful a cd I know I'm all late but 1st question do you need to use activator if you are just working spray paint not the film and other question is in working with tumblers and would like to know how to cover the whole cup in 1 take. Thank you in advance
I am not familiar with the spray paint method very much but I do know they don't use activator.
No you don't need activator. Just oil based paints. Just do the whole cup in one take.
You should make your own activator mate. It's just xylene and thinner. 70/30 mix. People are making this and calling it activator. placing it in blank jugs and putting their own label and a 50 dollar price tag on it. Notice that none of them put the ingredients on the jug? Xylene 12 bucks. Thinner 7 bucks
Yeah I'm looking to hydro dip my Taurus g2c
Do it, or have us do it!
Hello, I am new to hydro dip film and was wondering how do you figure out which side of the film you should lay touching the water and which side faces away from the water?
Thats easy.. lick your finger and stick it on the film... which ever side sticks to your finger, thats the side that goes on the water. I know it sounds crazy but it is the easiest method and I do it every time I cut a piece of film. Just becomes habit after a while.
Today was my first attempt at this art. I dipped a wooden skate board blank. It came out pretty good. A few small imperfections but overall I was tickled to death. I rinsed it off for what seemed like forever then pat it dry. About an hour after that, I applied Rusto Oleum Acrylic Enamel clear over it. About 30 mins later the entire board was a mess. The Clear cost reacted with something and caused the print to crack and blister up. Any Suggestions?
Best tip ever.... stop using a paints that are not designed for hydro dipping. Switch to OHW or a hydro dipping paint and clear and those issues will go away.
Ordered some OHW supplies :) @@AllThingsFunHydrographics
@@frankmick8683 Awesome, you will love it. I use the paints all the time. Good stuff.
Hey do I have to spray the object with water to clean the film off right after I dip it or should I let it dry before I have to clean it. I’m asking because I just dipped a p90 body and while I’m rinsing it I’m seeing it come off however it’s not bad and I quit rinsing so I guess my question is what the fuck do I do?
Yes it needs to be rinsed right after you dipped. If the sip is coming off when rinsing then you messed something up: either didn't use the right paint, waiting too long after painting and the paint is now cured, or you didn't activate right.
Do I have to sand my gun b4 spray paining it?
Yes
Hi! Great series of tips! I have a question: can hydrodipping be done on a textured surface? I have a plastic engine cover I'd like to do, but it has a textured finish that would be difficult to sand smooth.
The texture will mute the detail of the film. It will work but look “fuzzy”
Hi I hydro dip with just spray paint and not film is there any tips you can give me and what temperature should the water be when dipping
I have no clue, I have never dipped with just spray paint.
@@AllThingsFunHydrographics oh ok thanks well what temperature do you dip the film in
I am new to hydro dipping can I use just spray paint and a tub and spray my paint in the water then just dip it or do I have to use a activator. If it just spray paint.
I do not do the spray paint dipping so I am not an expert in that area. I know that the people who use the spray paint do not use activator they just spray the paint on top of the water.
Um all three looked the same when you sprayed it. I'm out of my league 😂 ill just purchase my tumbler lol I was going to try and make one
How do I prep a helmet? Just paint over it a solid color
Watch this video we did on prep...
th-cam.com/video/aLUUgl-TMVE/w-d-xo.html
I’m having issues where my film is wrinkling, not when placed or activated but around the item I am dipping during the dip, then drying with raised creases or ripples on the item. Any idea what is causing this or how to fix it?
If the film in wrinkling as your dipping then you either have bad film or you are not activated enough. Film can go bad if it is not stored properly. It needs 40-50% humidity and 70 degrees.
Can you hydro dip chrome?
So of I'm going to hydrographic dip over my epoxied cups, is there any other special steps I need to take before dipping?
Scuff, paint, dip. It will be fine but it has to be painted so it will cover your epoxy. The dip wont stick without paint.
@@AllThingsFunHydrographics what if I scuff my epoxy layer then dip? So that way I can have my glittery goodness showing thru my translucent film.
@@sparklinmommaglitters553 if your going to do that then use intercoat clear. OHW sells it. Its just a clear paint that is dippable. Scuff your epoxy, spray a few coats of intercoat clear, dip, and thrn clear coat like normal.
@@AllThingsFunHydrographics I was just looking at the intercoat! Think ima try that thanks for your help!!
@@sparklinmommaglitters553 no problem, got a video coming on using intercoat very soon. It works really good, and don't forget to use that link to OHW in the video description for 5$ off your order.
how much time,before activation
60-90 seconds depending on the film
Question, can you dip something that already has “paint” on it. Like if I order something that comes dipped already can I dip of that ?
th-cam.com/video/EzWYBRqhwh4/w-d-xo.html
That video will answer your question
what are those thing on the wall?
Learned alot props on the video!
Awesome, glad I could help
Cool, thanks for the tips and info mate. 😊👍
Glad I could help!
Hey I would like to be able to print out my own designs to make my own dips? do you have a video with what paper and how to print on it?
I do not make films, I buy them from companies already printed. Good luck finding out how to do it yourself, from what I hear it is insanely expensive and the companies that print it do not give up the info on how they do it. Not worth the headache or expense in my opinion.
@@AllThingsFunHydrographics ok, thanks for replying!
@@straysheep3149 No problem anytime.
Love the GI Joe theme
Thank you for your help and quick reply :o) I really appreciate it!!!!
Anytime Craig, no problem.
Can you put a hydrographix design under/over another design?
Yes you can
So what’s the preferred one looks like?
I don’t quit catch if things were activated or not
What is it that you don't under stand? Maybe I can help and explain it better.
Good evening from Greece!New follower and i really want to learn this procedure!Your videos are very helpfull.Is the shop on the link yours?Thank you for your time!!
Welcome. Yes the link is mine but I do not sell any products, you would need to find someone in your country that can import it for you because none of the companies in the states ship overseas. If you want to learn more then you should check out our online training on Patreon. www.patreon.com/ATFhydrographics
@@AllThingsFunHydrographics i will and thank you for your reply Chris!!