@@andrewbrummer9539 there hard to find nowadays. Thunder tiger or associated rival 1/8 came stock with these tires on it. But they discontinued the truck so I'm not sure if you'd be able to find them
Nice job I'm debating to convert my revo 3.3 I converted both my tmaxx 15 to brushless 2s anything high an I break axels it's all stock but I really .ight take my 1900kv motor out of my rustler an take it off 6s an put it back on 3s an 6s my revo. How to you like it converted I like the tmaxx converted but man it's close.
What rocker arms are you running I ha e p2 an lt120i think but my sway bar gets stuck under the rocker arms with the 120 rockers an it sits low with the p2 what are you running
I really love the footage and is everyone told you already looks amazing my question to you is there any way that I can get one of those made by you from you I'm currently restoring a old Revo 2.5 nitro edition and I just finished rebuilding the trans and all that good stuff and I hit the point where I'm stuck in the middle of converting or not and after watching your video if I had one of those motor mounts I think I would just go ahead and convert so if I can get one off of you would be great so please let me know look forward to hearing from me
I just picked up one of these super cheap and it was already converted.. I'd like to ask how your truck is doing, is it still working? I am asking because I destroyed the front diff in mine and wondered if you had similar problems. I'm running a 150amp esc and a 4s 5400mah battery
I know I'm 5 years too late but did you ever produce set up/mount for sale? I have the original Tekno RC conversion but it's not allowing to use adjust for standard pinions over the e-clutch.
I was thinking the same thing. Id like to keep the auto shifting 2-speed as well after the conversion but I just think the sheer amp burst of the brushless motor is going to level each and every tooth in the case. I think im going to look for a drop in alloy set thats identical to the plastic 2-speed and pray it works. I dont think I want to cheapskate out on this part of the conversion and get some cheap chinese pot-metal, I'd rather find a good brand that makes it (if they they even make a set at all) like Integy, I know Integy makes high quality alloy diffs and such . Everything must go metal from that point on including cv shafts, center shafts and diffs. The good thing about doing this conversion is, it almost forces you to bulletproof the whole driveline. This of course is all thought as Im noticing my Revo 3.3 is getting a little tired and am contemplating just getting a new nitro engine. If I do decide to do a electro conversion I'll be sure to do a build series containing each necessary part used in order to retain the auto shifting 2-speed.
martin peace Thanks brother for the quick reply and answering . I might just get the Integy Alloy diffs and Motor mount esc bracket that Integy makes than since you answered my question. I'll be sure to do a build series on my channel when I start, but I might do like you did with pictures and a video at the end, seems much easier. I just won some Imex Swamp Dawgs which they are no longer in production in the 3.8 size on Ebay with wheels! They like look like the Interco Boggers in 1:1 they will add a nice touch to the build. Thank you for your insight and your inspiration for me to get it on the bench and start ordering lol. I think I'll start this weekend! Thanks and hats off to you sir on such an amazing conversion. P.s (I hope you dont mind me asking a few questions along the way) Cheers, Matt
Did you make the motor mount or t Is that a how 2 rc cus my mod 1 34t pinion will not fit I had to shave to much meat off the mount an it weakened the structure an it flexes an move the mesh
Great job on the build! Holy crap that second pinion was enormous! Did you ever try running it like that? What were you using for a cell count on your test run? Seemed to be running strong!
Martin this is the bestest video I've ever watched call videos love and on putting lights and everything else subscribed done the notifications everything keep doing well and you will get maybe you'll get your emerald play button
+martin peace Think he means the plate you used to reinforce the structure on which you mounted the motormount. I guess you had that laying around and its custom made just like your mount ;) right? My question.... Does it work? Does it work against flexxing of the chassis to prevent destroying your spur gear?
@@mp-rcspeedrun2759 So doing this mod cost more than working on a real car by replacing rotors and brake pads. That DC motor still running & working now?
![[LIVE] : ONE ลุมพินี 72 | คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
You did such a amazing job. Good job on it, it looks great👍🏼👍🏼
I have that same body. (2008) platinum edition. Great job I. Going to convert mine soon . It looks great
Thank you for your mount, I converted mine into a 6s
Great build
awesome pictures.
THANKS
So glad I just traded my e revo for a revo 2.5 and 3.3 the 2.5 will be converted
Thanks, was a lot of work but worth it in the end
Very nice build
Thankyou
looks great, i like the tires i also put them tires on my e revo as well they look sweet
What tires are they I cant find them anywhere
@@andrewbrummer9539 there hard to find nowadays. Thunder tiger or associated rival 1/8 came stock with these tires on it. But they discontinued the truck so I'm not sure if you'd be able to find them
Nice job I'm debating to convert my revo 3.3 I converted both my tmaxx 15 to brushless 2s anything high an I break axels it's all stock but I really .ight take my 1900kv motor out of my rustler an take it off 6s an put it back on 3s an 6s my revo. How to you like it converted I like the tmaxx converted but man it's close.
What rocker arms are you running I ha e p2 an lt120i think but my sway bar gets stuck under the rocker arms with the 120 rockers an it sits low with the p2 what are you running
Nice job! Do a conversion for a tmaxx too!
Is there anyway you could tell me the transmission setup and gearing you used. Thank you. By the way. Your truck looks amazing.
Do i need to change transmisión?
I really love the footage and is everyone told you already looks amazing my question to you is there any way that I can get one of those made by you from you I'm currently restoring a old Revo 2.5 nitro edition and I just finished rebuilding the trans and all that good stuff and I hit the point where I'm stuck in the middle of converting or not and after watching your video if I had one of those motor mounts I think I would just go ahead and convert so if I can get one off of you would be great so please let me know look forward to hearing from me
Amigo dura mais ou menos quanto tempo uma bateria com o carinho rodando
Eu converti uma também ficou show
Spur and pinion how t?
I just picked up one of these super cheap and it was already converted.. I'd like to ask how your truck is doing, is it still working? I am asking because I destroyed the front diff in mine and wondered if you had similar problems. I'm running a 150amp esc and a 4s 5400mah battery
Lee OfBacup I shimmed my diffs properly they all good
from where have you the alu plade for the erevo
and nice car
Top irmão parabéns
I know I'm 5 years too late but did you ever produce set up/mount for sale? I have the original Tekno RC conversion but it's not allowing to use adjust for standard pinions over the e-clutch.
There is a company called how2rc.com that makes this motor mount and battery tray
I was thinking the same thing. Id like to keep the auto shifting 2-speed as well after the conversion but I just think the sheer amp burst of the brushless motor is going to level each and every tooth in the case. I think im going to look for a drop in alloy set thats identical to the plastic 2-speed and pray it works. I dont think I want to cheapskate out on this part of the conversion and get some cheap chinese pot-metal, I'd rather find a good brand that makes it (if they they even make a set at all) like Integy, I know Integy makes high quality alloy diffs and such . Everything must go metal from that point on including cv shafts, center shafts and diffs. The good thing about doing this conversion is, it almost forces you to bulletproof the whole driveline. This of course is all thought as Im noticing my Revo 3.3 is getting a little tired and am contemplating just getting a new nitro engine. If I do decide to do a electro conversion I'll be sure to do a build series containing each necessary part used in order to retain the auto shifting 2-speed.
MattySlimz absolutely no point having a 2 speed with brushless on a revo mate, it'll change up to 2nd within half a second
martin peace Thanks brother for the quick reply and answering . I might just get the Integy Alloy diffs and Motor mount esc bracket that Integy makes than since you answered my question. I'll be sure to do a build series on my channel when I start, but I might do like you did with pictures and a video at the end, seems much easier. I just won some Imex Swamp Dawgs which they are no longer in production in the 3.8 size on Ebay with wheels! They like look like the Interco Boggers in 1:1 they will add a nice touch to the build. Thank you for your insight and your inspiration for me to get it on the bench and start ordering lol. I think I'll start this weekend! Thanks and hats off to you sir on such an amazing conversion. P.s (I hope you dont mind me asking a few questions along the way) Cheers,
Matt
MattySlimz no probs , take a look at the rcmonster motor mount , and try just shimming your original diffs .
Did you make the motor mount or t
Is that a how 2 rc cus my mod 1 34t pinion will not fit I had to shave to much meat off the mount an it weakened the structure an it flexes an move the mesh
I seen the weld where you added gotcha I'll just make another one lol
Great job on the build! Holy crap that second pinion was enormous! Did you ever try running it like that? What were you using for a cell count on your test run? Seemed to be running strong!
rc Ohio yes I ran it but blew the tyres off at 63mph .
3s or 4s I think
Lmfao. Damn if the tires held up, you likely would have reach 100mph with that gearing.
Awesome build man.
Can u still use 2 speed transmission?
its from an old jato chassis.
yes mount is strong
This comment just turn the light on bud! thanks Great vid
where did you get a pinion gear to match a nitro transmission spur? and what tooth is it
quinton wood mod1 pinion same as
revo 3.3 spur
i see thanks :D
the revo gears are mod1 same as most 1/8 brushless gears
Martin this is the bestest video I've ever watched call videos love and on putting lights and everything else subscribed done the notifications everything keep doing well and you will get maybe you'll get your emerald play button
Thanks Tomos.
I should have kept this rc
faz um suporte desse pra mim por favor !!!
What gear did you use
fan just helps the cooling , not essential though.
do you think a velineon 3500 would work for a revo conversion ?
T. Man I'd prefer 1/8 motor
like what ? you mean brushed or brushless ? input is greatly appreciated.
T. Man 1/8 brushless motor 1512 or larger
did you fab all your own parts, like motor mount and esc plate???
Do you have dimensions of the mount you made ?
Shaun Borg no sorry this one is sold now
Did you use the same transmission off the 3.3
Stock trans with foc and removed 1st gear
Sorry Ni , which part do you mean ?
+martin peace
Think he means the plate you used to reinforce the structure on which you mounted the motormount.
I guess you had that laying around and its custom made just like your mount ;) right?
My question.... Does it work? Does it work against flexxing of the chassis to prevent destroying your spur gear?
Is your motor esc setup sensored?
palmer589 no
Na minha opinião uma revo 3.3 convertida para elétrica dica mais reforçada que a e revo original de fábrica
Hey can I pay u to make a motor mount
No sorry , I only make one off parts for my own rcs .
RcMonster make a great mount for it .
Yo tengo un anillo igual a ese de oro y una rc igual traxxas
How much for all those parts?
200 mabe ish , was quite a while ago now
@@mp-rcspeedrun2759 So doing this mod cost more than working on a real car by replacing rotors and brake pads.
That DC motor still running & working now?
The motor is still going strong now in a different truggy
what song is that man
Don't know , it was just generic music on an app
Rip nitro 😔
this video is so sad ..... or ist just the music...
Martin. I. Fave. A. Camille. It's. Called. tomostipler
y