DO NOT ASK WHERE TO FIND A BRAWL ISO IN THE COMMENTS. YOUR COMMENT WILL BE DELETED THE USB LOADER IS IN THE MAIN APP! SDXC CARDS (32GB-2TB) FORMATTED TO FAT32 ARE NOW SUPPORTED! ANOTHER INSTALLATION METHOD We are highlighting a comment made below by GilmourPage1512: "I know an easy way to install if you already have homebrew channel + cfg usb loader + SSBB game iso (well, wbfs), just download the project+ v2.11 file and decompress. You will see a folder, enter and move everything to your sd card (formatted fat 32). Create a folder in your sd card with the name "code". Enter to the folder Project+ that you previously moved to your sd card and find the files RSBE01.GC , RSBE01.txt and gc.txt. Move both ".txt" files to the root of the sd card and change the gc.txt file name to "gameconfig". Now move the RSBE01.GC file to the "code" folder we created at the beginning. Thats it. Now enter to cfg usb loader and activate the option ocarina codes before you launch the game. It worked for me." PLAYING ON A WII U If you're trying to play Project+ on a Wii U, all of the instructions for the Wii guides should transfer over to the Wii U's virtual Wii settings, except for the USB loading method. Here's a guide on Wii U hacking: wiiuguide.xyz/#/vwii-modding DOLPHIN PERFORMANCE If you're struggling to get dolphin to hit 60FPS consistently while playing Project Plus, head over to the Project Plus Discord server, and type ".performance" in the Dolphin channel. You will be given a list of suggestions to optimize dolphin for performance. HD TEXTURES The dolphin version of Project+ comes bundled with HD textures! If you want to see the game in HD, go into your graphics settings, go to the 'Advanced' tab, and then check the boxes that say "Load Custom Textures", and then "Prefetch Custom Textures". Then, in the first 'Enhancements' tab, turn your "internal resolution" option to whatever definition above 640x528 you prefer. CIOS We now recommend installing cios d2x-v10-beta52 instead of d2x-v8-final NETPLAY BUFFER There is actually a mistake in how we described the buffer system. The 'personal buffer' actually *does* affect the connection. This is mainly going to be useful when there are 3 or 4 players in a lobby, and one player is much farther than the others. For example, if 3 players are East Coast USA, and one player is West Coast USA, then the "minimum buffer" would normally need to be raised to accommodate the West Coast player. However, if the West Coast player increases their 'personal buffer', then the minimum buffer can be lowered. This means that only the player with higher ping/unstable connection needs to have high input delay, rather than the whole group. How it would work: 1. Start the game with everyone in the netplay lobby. 2. Increase the "minimum buffer" until there is no lag 3. Have the player with the highest ping set their 'personal buffer' equal to the "minimum buffer" 4. You can now lower the "minimum buffer" so that the input delay is lower for the rest of the group
Man, this was one of the most difficult projects I've ever worked on. I've never really dealt with the Wii side of Project M/+, so I had to learn what I was supposed to be showing as I was making the video, and had to make sure everything made sense. Although that might have been a blessing in disguise, since if I didn't understand something, then a new person might not have either. Fact checking, replacing footage, rewording things, restructuring areas... just a ton of work, ON TOP of this being a 20 minute informational video lol. Additionally, we had some setbacks that we had to work around. Che's mic stopped working mid way through the project, and we had to make due with his phone (which is why his voice sounds off in places lol) And glitches! Sooo many glitches while editing this thing haha. Anyway, I hope you all enjoy this resources. This will probably be one of the last things I do specifically for the PM/+ community for... probably the rest of my time with this game. And I will also be largely stepping down from Nexus endeavors for at least a few months while I focus on my own work. Thanks for all the good times everyone! SHEEシ YA LATER!
How do i download hackless on my phone? I was gonna download, then put it on my 32gb micro sd card, but put it on my computer and put the files on my 2gb sd card after extracting with winzip
First, you have to install it on dolphin, then you have to go to steam and click "add a non steam game to steam" and click on your dophine file. You then install the steam link app on your samsung and link it to your steam account. Configure your gamepad to your steamm your samsung smart fridge and dolphine. Open dophine in steam using the steam link app then open Project p+ using dolphin. I have no idea if the steam link app works with non steam games but I think it just runs steam big picture on your device. Edit: There is an app called rainway that will also work.
Title does not lie, this is definitely the most comprehensive and detailed guide i’ve seen to download PM/P+ ever, in comparison to other simpler videos on TH-cam. Thanks Nexus Team!
Just a pro tip. Most 8 gb USB sticks don't actually hold a full 8 gigs of data on it, and is usually less, so it's a much safer option to just go for a 16 gb USB stick
As a melee player, to be able to play Wario (my favorite nintendo character) with primarily melee based mechanics with friends and online against people is straight up goateed. Thankyou guys so much.
Just want to say that this channel was a breath of fresh air. Very high quality and high production. Im always sad when i see deserving channels not being as big as they should be. But the effort is 100% recognized over here. Great video
I know of an easier way to play project + with USB Loader So after you extract all your files onto your SD card navigate to the folder that says "Project+" There should be a file that reads "RSBE01.GCT" and a text document that reads the same thing. You want to take those files and put them in the "codes" folder on the root of your SD card (create one if you do not have one) Now back to the Project+ folder there should be a text document that reads "gc.txt" move that file to the root of the SD card and rename it "gameconfig" now you have to launch Brawl from USB Loader GX. There are 2 ways to do it. If you have a copy of Brawl you can insert it inside your wii and there should be an option in USB Loader GX to rip the disc into the wbfs format which is how you launch it. The 2nd method is if you already have an iso of Brawl on your computer. You can use the Wii Backup Manager which basically does the same thing USB loader does and converts the iso into 2 wbfs files that should work for your wii. With your files on your SD card and your flash drive you should be able to play P+ from there. Have fun!!
Thank you! I think they assume you'ld start with a vanilla Wii but in my case it already runs with SNEEK, so I wondered if I can keep my SNEEK boot.elf. From your comment I assume I can and only need gameconfig, the Project+-Folder and codes folder with the gct- and textfile in it. I might try that soon.
having little trouble, when I open Dolphin, it does read my roam of SSBB but I dont see the project plus you clicked for starting it, even tho the project plus folder is inside the same folder of my SSBB roam
If I've already installed a cIOS before can I skip the 2dx cIOS installer section? I ask this because I don't want to mess up my already modded Wii. Thanks a lot for your work! I want to play Project + so bad lol
my setup in not working but is there a difference from not holding a and letting the app "detect" usb loading or should I always long press a for the menu thinggy
Man no matter what angle I try, running straight from disc, running as wbfs files from usb loader with project plus files on sdxc. No matter what I try keep getting the same (instruction at 0x80205fd8 (read from SRRO) error screen
I think asked this not too long ago, but just Incase I’ll still ask If I were to download both project m and project plus for homebrew and moved the 2 files onto the same SD Card, would anything happen to my Wii or will it just not work?
For the dolphin setup, if you already had a dolphin client, can you just move the files not in the normal dolphin client from the proprietary dolphin client to the normal dolphin client and run it from there or can you only use the proprietary client?
@@cosmicvoidtree Ok. No problem. If it helps I have found the way to do it. Besides making the ssbb iso the default iso in your dolphin. You just have to load the sd card (sd.raw) located in the project plus folder (given you have the project plus folder on your pc as well. I even got it to work in Batocera.
bro... I did the method that lets you play a legally obtained wbfs of brawl for the Universe mod and now it does this thing here when i load either from disc or usb it loads the logo right before the intro cutscene then freezes and i cant play i even redownloaded it no luck please i need help i cant even play the disc method anymore
7:30 There's a link in the description that has a homebrew app designed to rip your disks and create iso files. If you dont have a brawl disk, then we can't help you since distributing iso files is illegal. We will delete comments that continue to ask about it.
I’m using a Mac computer for this and when ever I go to format the SD card, it doesn’t seem to give you the option to set the kilobytes to 32. Is there something that is missing or am I just crazy?
I did actually, the computer does that automatically. Also, this comment is extremely outdated now that I have a Windows laptop and actually understand how macs work lol
SDXC CARDS (32GB-2TB) ARE NOW SUPPORTED FOR PROJECT+! As long as it's formated to FAT32. Dolphin build has HD TEXTURES you can enable in graphics -> advanced -> load custom textures
Can you guys also do a tutorial on how to install other smash mods? I know you are PM nexus but I feel it would be cool if you can do tutorials on smash remix 64, the melee sd remix, and the one for brawl. Can you guys also do tutorials on how to add and remove maps?
Just a heads up, this guide is outdated if your using developmental builds of Dolphin, which you should be given stable is 5 years old now. to check your MD5 checksum you need to go to properties- verify and hit verify integrity rather than properties-info
USB Loading doesn't work for me. Everytime I try to launch project+, I get a black screen, and my wii u freezes which forces me to unplug the wii u everytime...
I have the PaL version I have no Homebrew I have no SD card I have no b*tches I have no idea what to find and I don't know if it will even work as I don't know if my Wii is even good enough to updated
if your dump of brawl is already wbfs for the usb loader method, the wbfs tool can convert it to iso, which can be converted to the 2 wbfs files and put on the flash drive
Where can i find the project plus usb loader i can't find it i look everywhere does any of you guys have the link to download it please share it with me
very late answer, but the usb loader is already bundled with the project+ launcher, if the console doesn't detect the disc it will launch the usb loader automatically and if you have the brawl iso/wbfs it should run perfectly
I have a wii with homebrew, but when i open project plus launcher and try to search for an update it says that the file info.xml was not found, then it just crashes in an exeption (same thing when i search for addons), but if i plug the SD card in pc i can actually see that file. Any help would be appreciated, thanks.
The version of d2x Custom IOS installer that you use on the video is v8-final but the current version from the written guide are the v11-beta and have different filles, besides that i proceeded with the instalation and currently the application tries and fail to download a tmd.6175 file, not the tmd.5918 like in the video. I tried to download it manualy through NUS Downloader but it just dont work, wich makes sense since the d2x returns a network error when tries to download it too, it looks like the file is missing or something. I also tryed the another instalation method that you mentioned, but when i try to launch the game, the USB Loader shows the "RSBE01.dol does not exist" error, i realy dont know what to do.
if youre having trouble finding the project+ file to come in in dolphin you may also need to enable putting it in subfolders if its not already checked in the settings
Nice! Planning to USB load since I have brawl but the disc drive doesnt work fast enough to load brawl in time for project +, so regular method's off the table. I should ask though, I already have cIOS installs done, specifically on d2x-v10-beta52. Will this still work fine for usb loading project+?
I'm having an issue were after selecting a stage, the game goes black for a small second and then gives me an error in white text saying...something about address errors? Also even before that when selecting my character, the game crashed. I did the usb method. I am using cios d2x-v10 beta52. If any one has a similar error and fixed it, let me know, asap. Thanks!
im having the same issue and i have gone through all the steps again and even did all the troubleshooting and nothing is working. did you ever figure it out?
With the usb method, is there a way to get the GameCube controller adapter working on the Wii U? I’m a pal user and use the usb method to play project plus and wanted to know if it’s possible to run project plus on a usb using the GameCube controller adapter
HELP! I followed every step in the process for USB Loading but I don't have the Project+ USB Loader app on my Homebrew Channel, it doesn't come with the RAR file
So I have Project Plus 2.3.1 on the Homebrew Wii and I see on the website that there is a new update, P+ 2.3.2. How would I go about updating project plus to have the latest version?
I did everything the video said and i did all the troubleshooting but whenever i go to stage builder for hackless it loads then just gives me the regular menu. I have the files in the root of my sd card too
Can i use an 64 GB micro sd card with an SD adapter for the hackless method? what happens if I use an SDHC or an SDXC card? It doesn't fit? It causes the game to crash?
The usb method you listed doesn't work for me. It says my usb device isn't valid. Is there another way of loading through USB without using Project+ USB Loader?
I know, 4 years old, but after following your written guide, trice, I keep resulting in a Black Screen of Death with an "Exception" Error Message. I live in Europe and have a PAL Wii, so USB Loader and a NTSC Brawl ISO is my only option.
Doesnt work :( I got the Datas on the SD Card, I see the Project+ Symbol in the Homebrew Channel and click load. The screen turns black - Suddenly the Wii reboots ...... Help?
Is the USB method a sneaky way of saying "fuck you" to non-disc users? Because the Project + USB Loader app is NOWHERE to be found. Not even in the site itself.
@@THAT_TOXIC_SOUP I have the Project + Usb Loader from v2.2 and it works perfectly with v2.26, The Usb Loader app fused with the normal so it means you can still play without the disk but I had several issues with it
@@THAT_TOXIC_SOUP You must use an SD card especially and SDHC card to make it work better, it doesnt work with USB. And Brawl must be a WBFS file to work on wii
@@THAT_TOXIC_SOUP I'm not 100% sure but it's because a USB can't run properly the files, for example trying to install The Homebrew Channel from USB won't work because it can't run its files
No the USB loader is packed into the console download. Everything you need for the console you chose to play on is included in it's respective download
Hello plz i doesn't understand cause i had a d2x and priiloader but i need only a smash bros brawl ISO and config on d2x that for launch that isn't it?
Do I need a wii lite for the wii lite version to work? I tried it on my regular wii and it didn't work so I also tried the wii version but my 2gb sd card really only has 1.86gb. The homebrew method didn't work for me either and my wii isn't able to connect to my modem for some reason
Can I not have both slippi melee and p+ on the same sd? I tried the extract method and all it does when I hit p+ launchers is load for like 3 secs and then goes right back to the homebrew channel
Nothing about this process should have changed beyond the fact that the dolphin version has an update button now that will update if there's a new patch. The process is the exact same
is there anywhere to like gx loader the super smash bros brawl and somehow mod that wbsf file so it can have universe it? sorry if it’s hard to understnsd what i mean. i’m new to nodding the wii so i’m not familiar with like wii modding vocabulary lol
DO NOT ASK WHERE TO FIND A BRAWL ISO IN THE COMMENTS. YOUR COMMENT WILL BE DELETED
THE USB LOADER IS IN THE MAIN APP!
SDXC CARDS (32GB-2TB) FORMATTED TO FAT32 ARE NOW SUPPORTED!
ANOTHER INSTALLATION METHOD
We are highlighting a comment made below by GilmourPage1512:
"I know an easy way to install if you already have homebrew channel + cfg usb loader + SSBB game iso (well, wbfs), just download the project+ v2.11 file and decompress. You will see a folder, enter and move everything to your sd card (formatted fat 32). Create a folder in your sd card with the name "code". Enter to the folder Project+ that you previously moved to your sd card and find the files RSBE01.GC , RSBE01.txt and gc.txt. Move both ".txt" files to the root of the sd card and change the gc.txt file name to "gameconfig". Now move the RSBE01.GC file to the "code" folder we created at the beginning. Thats it. Now enter to cfg usb loader and activate the option ocarina codes before you launch the game. It worked for me."
PLAYING ON A WII U
If you're trying to play Project+ on a Wii U, all of the instructions for the Wii guides should transfer over to the Wii U's virtual Wii settings, except for the USB loading method.
Here's a guide on Wii U hacking: wiiuguide.xyz/#/vwii-modding
DOLPHIN PERFORMANCE
If you're struggling to get dolphin to hit 60FPS consistently while playing Project Plus, head over to the Project Plus Discord server, and type ".performance" in the Dolphin channel. You will be given a list of suggestions to optimize dolphin for performance.
HD TEXTURES
The dolphin version of Project+ comes bundled with HD textures! If you want to see the game in HD, go into your graphics settings, go to the 'Advanced' tab, and then check the boxes that say "Load Custom Textures", and then "Prefetch Custom Textures". Then, in the first 'Enhancements' tab, turn your "internal resolution" option to whatever definition above 640x528 you prefer.
CIOS
We now recommend installing cios d2x-v10-beta52 instead of d2x-v8-final
NETPLAY BUFFER
There is actually a mistake in how we described the buffer system. The 'personal buffer' actually *does* affect the connection. This is mainly going to be useful when there are 3 or 4 players in a lobby, and one player is much farther than the others. For example, if 3 players are East Coast USA, and one player is West Coast USA, then the "minimum buffer" would normally need to be raised to accommodate the West Coast player. However, if the West Coast player increases their 'personal buffer', then the minimum buffer can be lowered. This means that only the player with higher ping/unstable connection needs to have high input delay, rather than the whole group.
How it would work:
1. Start the game with everyone in the netplay lobby.
2. Increase the "minimum buffer" until there is no lag
3. Have the player with the highest ping set their 'personal buffer' equal to the "minimum buffer"
4. You can now lower the "minimum buffer" so that the input delay is lower for the rest of the group
There is no chance the hackless method can brick a wii right?
@@SharonisCarin321 correct
I got the Wii u USB loader method to work as well.
thank you
Wow he does NOT want us to know an iso
Man, this was one of the most difficult projects I've ever worked on.
I've never really dealt with the Wii side of Project M/+, so I had to learn what I was supposed to be showing as I was making the video, and had to make sure everything made sense. Although that might have been a blessing in disguise, since if I didn't understand something, then a new person might not have either. Fact checking, replacing footage, rewording things, restructuring areas... just a ton of work, ON TOP of this being a 20 minute informational video lol.
Additionally, we had some setbacks that we had to work around. Che's mic stopped working mid way through the project, and we had to make due with his phone (which is why his voice sounds off in places lol)
And glitches! Sooo many glitches while editing this thing haha.
Anyway, I hope you all enjoy this resources. This will probably be one of the last things I do specifically for the PM/+ community for... probably the rest of my time with this game. And I will also be largely stepping down from Nexus endeavors for at least a few months while I focus on my own work.
Thanks for all the good times everyone!
SHEEシ YA LATER!
Thank you so much dude!
How do i download hackless on my phone? I was gonna download, then put it on my 32gb micro sd card, but put it on my computer and put the files on my 2gb sd card after extracting with winzip
@@SharonisCarin321 Honestly you should just download it on your computer and do whatever they said.
I have a question: Is there any way to get it on Riivolution?
@@okestboomer does hackless work on a 512 MB sd card
How can I install P+ on my samsung smart fridge?
First, you have to install it on dolphin, then you have to go to steam and click "add a non steam game to steam" and click on your dophine file. You then install the steam link app on your samsung and link it to your steam account. Configure your gamepad to your steamm your samsung smart fridge and dolphine. Open dophine in steam using the steam link app then open Project p+ using dolphin.
I have no idea if the steam link app works with non steam games but I think it just runs steam big picture on your device.
Edit:
There is an app called rainway that will also work.
Is this a joke?
@@LeonandElite no
@@turtlehub2731 I'm certain he was kidding! How did you find this out? I kinda wanna see someone do this now.
@@JediJess1 research. If you were to do it use rainway.
Title does not lie, this is definitely the most comprehensive and detailed guide i’ve seen to download PM/P+ ever, in comparison to other simpler videos on TH-cam. Thanks Nexus Team!
Just a pro tip. Most 8 gb USB sticks don't actually hold a full 8 gigs of data on it, and is usually less, so it's a much safer option to just go for a 16 gb USB stick
wait, so you can use a usb stick instead of a SD card?!?!?! pls respond
@@AbranTheDoor So I need both? can I just use like 2 USB sticks
@@AbranTheDoor thanks so much which usb port holds the storage and which hos the game +mods
Yellow mine is the one with gc compat
@@AbranTheDoor yea
As a melee player, to be able to play Wario (my favorite nintendo character) with primarily melee based mechanics with friends and online against people is straight up goateed. Thankyou guys so much.
Amazing guide! Great work guys!
This video is perfect. Great explanation, very thorough, and doesn't make anyone feel like an idiot for not already knowing how to hack/mod their wii.
finally I can just link people instead of explaining, thanks dude!
You remind me of some other goofy bird I know
@@ramblincapuchin9075 This
how do you get project +
.beatlock
Just want to say that this channel was a breath of fresh air. Very high quality and high production. Im always sad when i see deserving channels not being as big as they should be. But the effort is 100% recognized over here. Great video
I know of an easier way to play project + with USB Loader
So after you extract all your files onto your SD card navigate to the folder that says "Project+"
There should be a file that reads "RSBE01.GCT" and a text document that reads the same thing.
You want to take those files and put them in the "codes" folder on the root of your SD card (create one if you do not have one)
Now back to the Project+ folder there should be a text document that reads "gc.txt"
move that file to the root of the SD card and rename it "gameconfig"
now you have to launch Brawl from USB Loader GX.
There are 2 ways to do it. If you have a copy of Brawl you can insert it inside your wii and there should be an option in USB Loader GX to rip the disc into the wbfs format which is how you launch it. The 2nd method is if you already have an iso of Brawl on your computer. You can use the Wii Backup Manager which basically does the same thing USB loader does and converts the iso into 2 wbfs files that should work for your wii. With your files on your SD card and your flash drive you should be able to play P+ from there. Have fun!!
Thank you! I think they assume you'ld start with a vanilla Wii but in my case it already runs with SNEEK, so I wondered if I can keep my SNEEK boot.elf. From your comment I assume I can and only need gameconfig, the Project+-Folder and codes folder with the gct- and textfile in it.
I might try that soon.
Absolutely awesome comprehensive guide, can't thank you enough for this!!
@@RinoaAeris exactly. Far from comprehensive.
My Wii disc reader wasn’t working, so I’m glad I can still play.
Fantastic guide!
Thanks a lot for keeping it simple, comprehensive and neat to look at.
I've been trying on and off to get P+ running on Linux for weeks, thanks so much for providing info on how to get it set up!
Can you also do the USB loader method, but with the Game itself loaded off of the sd Card?
great video - very organized and concise
Amazing guide guys! Really appreciate it
this is one of the few times where I find a guide that is so good that I subscribe for more
Where do i get the "project plus usb loader" channel?
Your guide was just so good & thorough to the point I just couldn’t help but subscribe ✊🏼
having little trouble, when I open Dolphin, it does read my roam of SSBB but I dont see the project plus you clicked for starting it, even tho the project plus folder is inside the same folder of my SSBB roam
Yeah me too
My problem was that i opened my dolphin version, (normal one) u gotta open the one that was downloaded in thd folder
Liked this video for the editing alone. Great work!
What is missing is the guide for those who already have Dolphin installed. Any help for setting up P+ with preexisting Dolphin software?
Thanks, this worked without any issues and I didn't have to rely on the comment section to do what I came to do.
I have installed and formatted my SD cards and Homebrew will not read the mods at all (no pop ups nothing). Any help?
The Dreadnaut The mods pop up but don’t work for me for some reason
Just 10 secconds sonic in and this is already better than most guides.
If I've already installed a cIOS before can I skip the 2dx cIOS installer section? I ask this because I don't want to mess up my already modded Wii. Thanks a lot for your work! I want to play Project + so bad lol
I have a hp laptop and i cant seem to find any hole for my micro SD Adapter card
How do you get the P+ usb loader? Specifically the home brew app
The usb loader is now in the homebrew build so you can just launch that
my setup in not working but is there a difference from not holding a and letting the app "detect" usb loading or should I always long press a for the menu thinggy
@@Shywizz are you doing the homebrew setup?
@@alfredusmagnus yeah thanks I figured it out already, but it’s appreciated
ive tried many tutorial and just regular brawl keeps booting up 😔😔
Hey, I have everything requirement for the mod to load, but the mod isn't loading. Any idea what the issue could be?
Could be too late on this but how is it not loading. When you click on it nothing happens or does it pop out an error message.
Man no matter what angle I try, running straight from disc, running as wbfs files from usb loader with project plus files on sdxc. No matter what I try keep getting the same (instruction at 0x80205fd8 (read from SRRO) error screen
I saw the video on 0.25 speed and it was still too fast
I think asked this not too long ago, but just Incase I’ll still ask
If I were to download both project m and project plus for homebrew and moved the 2 files onto the same SD Card,
would anything happen to my Wii or will it just not work?
this is a great video but how do you load project+ from usb loader gx?
Use the Project + USB loader instead.
For the dolphin setup, if you already had a dolphin client, can you just move the files not in the normal dolphin client from the proprietary dolphin client to the normal dolphin client and run it from there or can you only use the proprietary client?
Hello, any luck with this? This is exactly what I'm trying to do.
I haven’t really been doing much with dolphin since and I didn’t look too much into it but I’ll let you know if I get any success
@@cosmicvoidtree Ok. No problem. If it helps I have found the way to do it. Besides making the ssbb iso the default iso in your dolphin. You just have to load the sd card (sd.raw) located in the project plus folder (given you have the project plus folder on your pc as well. I even got it to work in Batocera.
bro... I did the method that lets you play a legally obtained wbfs of brawl for the Universe mod and now it does this thing here when i load either from disc or usb it loads the logo right before the intro cutscene then freezes and i cant play i even redownloaded it no luck please i need help i cant even play the disc method anymore
The only thing I need is the brawl iso and I don't know where to find one
You've never googled this?
7:30
There's a link in the description that has a homebrew app designed to rip your disks and create iso files.
If you dont have a brawl disk, then we can't help you since distributing iso files is illegal. We will delete comments that continue to ask about it.
Just google it lol
@@BigSmoke-xh5hi I did but idk what's safe or not
ok i got it
i was able to get P+ running on the original build of dolphin instead of the custom P+ dolphin
How i can get the ISO?
Parabéns pelo trabalho, ficou ótimo o jogo!!!
thank you so much, it worked really well!
literally CAN'T find a Brawl ISO
vimm
@@sfee9386 thats illegal to tell, see you in court
@@AspectCave lol no it isnt
10:38
Uhh mine doesn’t have the option of v8,and when I try to press a twice without it it shows the green thing as red
I’m using a Mac computer for this and when ever I go to format the SD card, it doesn’t seem to give you the option to set the kilobytes to 32. Is there something that is missing or am I just crazy?
I did actually, the computer does that automatically. Also, this comment is extremely outdated now that I have a Windows laptop and actually understand how macs work lol
SDXC CARDS (32GB-2TB) ARE NOW SUPPORTED FOR PROJECT+! As long as it's formated to FAT32.
Dolphin build has HD TEXTURES you can enable in graphics -> advanced -> load custom textures
Can you guys also do a tutorial on how to install other smash mods? I know you are PM nexus but I feel it would be cool if you can do tutorials on smash remix 64, the melee sd remix, and the one for brawl.
Can you guys also do tutorials on how to add and remove maps?
Just a heads up, this guide is outdated if your using developmental builds of Dolphin, which you should be given stable is 5 years old now. to check your MD5 checksum you need to go to properties- verify and hit verify integrity rather than properties-info
I managed to get the usb loader working, thanks!
I wish I could heart react a TH-cam video instead of just like
USB Loading doesn't work for me. Everytime I try to launch project+, I get a black screen, and my wii u freezes which forces me to unplug the wii u everytime...
I dont think i can
😢
why not
I have the PaL version
I have no Homebrew
I have no SD card
I have no b*tches
I have no idea what to find and I don't know if it will even work as I don't know if my Wii is even good enough to updated
have you checked the project plus website?
@@phasi2182 I think, let me know if I have missed anything
Project plus needs its own slippi, I’m telling you all, it’d take off like a storm
Legal iso...
*Laughs in pirating*
THNX 4 ALL. Now I can play P+ USB method
if your dump of brawl is already wbfs for the usb loader method, the wbfs tool can convert it to iso, which can be converted to the 2 wbfs files and put on the flash drive
Wait fr? So I don't need a separate file for brawl?
Where can i find the project plus usb loader i can't find it i look everywhere does any of you guys have the link to download it please share it with me
very late answer, but the usb loader is already bundled with the project+ launcher, if the console doesn't detect the disc it will launch the usb loader automatically and if you have the brawl iso/wbfs it should run perfectly
I have a wii with homebrew, but when i open project plus launcher and try to search for an update it says that the file info.xml was not found, then it just crashes in an exeption (same thing when i search for addons), but if i plug the SD card in pc i can actually see that file. Any help would be appreciated, thanks.
The version of d2x Custom IOS installer that you use on the video is v8-final but the current version from the written guide are the v11-beta and have different filles, besides that i proceeded with the instalation and currently the application tries and fail to download a tmd.6175 file, not the tmd.5918 like in the video.
I tried to download it manualy through NUS Downloader but it just dont work, wich makes sense since the d2x returns a network error when tries to download it too, it looks like the file is missing or something.
I also tryed the another instalation method that you mentioned, but when i try to launch the game, the USB Loader shows the "RSBE01.dol does not exist" error, i realy dont know what to do.
it keeps crashing my wii,do i need to change my ios to actually play it?
if youre having trouble finding the project+ file to come in in dolphin you may also need to enable putting it in subfolders if its not already checked in the settings
They have removed the USB loader homebrew app from the apps folder. I cannot find another to replace it online.
Nice! Planning to USB load since I have brawl but the disc drive doesnt work fast enough to load brawl in time for project +, so regular method's off the table. I should ask though, I already have cIOS installs done, specifically on d2x-v10-beta52. Will this still work fine for usb loading project+?
I'm having an issue were after selecting a stage, the game goes black for a small second and then gives me an error in white text saying...something about address errors? Also even before that when selecting my character, the game crashed. I did the usb method. I am using cios d2x-v10 beta52. If any one has a similar error and fixed it, let me know, asap. Thanks!
So I've attempted the hackles way but when I go into stage builder the mod won't boot up
im having the same issue and i have gone through all the steps again and even did all the troubleshooting and nothing is working. did you ever figure it out?
With the usb method, is there a way to get the GameCube controller adapter working on the Wii U? I’m a pal user and use the usb method to play project plus and wanted to know if it’s possible to run project plus on a usb using the GameCube controller adapter
HELP! I followed every step in the process for USB Loading but I don't have the Project+ USB Loader app on my Homebrew Channel, it doesn't come with the RAR file
Have you got it to work?
So I have Project Plus 2.3.1 on the Homebrew Wii and I see on the website that there is a new update, P+ 2.3.2. How would I go about updating project plus to have the latest version?
Do you know how to do it now?
What size SD card is needed/recommended for the Wii's Homebrew method?
The USB loader isn't present in the current version (2.29), how do I configure it to load my Brawl iso?
How do I undo the CiOS changes? Now my wii won't load the brawl disc after I switched to the SD card method
I did everything the video said and i did all the troubleshooting but whenever i go to stage builder for hackless it loads then just gives me the regular menu. I have the files in the root of my sd card too
I need help I have the physical version of brawl and I launch project plus the usb loader as well and it just launches the main game not project plus
Same here
I even downloaded a rom and it still didn't work
Can i use an 64 GB micro sd card with an SD adapter for the hackless method? what happens if I use an SDHC or an SDXC card? It doesn't fit? It causes the game to crash?
The usb method you listed doesn't work for me. It says my usb device isn't valid. Is there another way of loading through USB without using Project+ USB Loader?
Thank you
The project plus my favorite game
I know, 4 years old, but after following your written guide, trice, I keep resulting in a Black Screen of Death with an "Exception" Error Message.
I live in Europe and have a PAL Wii, so USB Loader and a NTSC Brawl ISO is my only option.
I'm having similar issues with a japanese Wii despite base brawl working and everything else working fine the game just won't run with their loader
What do I do if Project + keeps crashing on launch?
Can't extract the d2x-v8-final on my PC :( 10:06. It gave me Cannot Complete the compressed (zipped) Folders Extraction Wizard notification.
Turns out its actually a 7-zip file, so you have to extract it that way.
@@Kamui-cv4th Ok I will try it tomorrow thanks!
Man this USB Loader guide did not work at all
The dolphin launcher is just lauching vanilla brawl, i feel like im missing a really important step
there is a file called sd.raw in the P+ folder click on user then wii and you'll see the sd.raw set that as the sd card thing in dolphin
1:30 ¿You Can or Can't? I can't distinguish well wich one are you saying.
SDHC and SDXC sd cards *do not* work with the hackless method
@@Sheecacaa3 Thanks.
my sd card said theres not enough space on it but i can't find any files on the card. this is the lite version also
Whenever I click on the .elf file, it just leaves me with a black screen. Any solutions?
Make sure the brawl iso is set as the default iso
I put it into the brawl folder but my game doesn’t appear in the dolphin emulator. Any suggestions to fix it ?
is there the latest guide for version 3.0.4, especly on the latest version of Dolphin
Doesnt work :(
I got the Datas on the SD Card, I see the Project+ Symbol in the Homebrew Channel and click load. The screen turns black - Suddenly the Wii reboots ...... Help?
I have the same problem!
Is the USB method a sneaky way of saying "fuck you" to non-disc users? Because the Project + USB Loader app is NOWHERE to be found. Not even in the site itself.
Prior versions of Project + such as 2.2v and 2.0v included the Project + USB Loader but I still don't if it is compatible with 2.25v or 2.26v
@@THAT_TOXIC_SOUP I have the Project + Usb Loader from v2.2 and it works perfectly with v2.26, The Usb Loader app fused with the normal so it means you can still play without the disk but I had several issues with it
@@THAT_TOXIC_SOUP You must use an SD card especially and SDHC card to make it work better, it doesnt work with USB. And Brawl must be a WBFS file to work on wii
@@THAT_TOXIC_SOUP I'm not 100% sure but it's because a USB can't run properly the files, for example trying to install The Homebrew Channel from USB won't work because it can't run its files
No the USB loader is packed into the console download. Everything you need for the console you chose to play on is included in it's respective download
What exactly stops an SDHC from working with the hackless method?
Can I do netplay from my wii? Doesn’t mario kart wii have a thing you can do where you can change something so you can play on servers
Hello plz i doesn't understand cause i had a d2x and priiloader but i need only a smash bros brawl ISO and config on d2x that for launch that isn't it?
9:13 i can't move the folder into the usb stick, i get a message saying the file is too big for the format of the usb stick.
did u format it to fat32
Do I need a wii lite for the wii lite version to work? I tried it on my regular wii and it didn't work so I also tried the wii version but my 2gb sd card really only has 1.86gb. The homebrew method didn't work for me either and my wii isn't able to connect to my modem for some reason
Can I not have both slippi melee and p+ on the same sd? I tried the extract method and all it does when I hit p+ launchers is load for like 3 secs and then goes right back to the homebrew channel
Maybe there should be a more modern version of this video. Because it's really not the same thing when I'm trying to launch it on my computer.
Nothing about this process should have changed beyond the fact that the dolphin version has an update button now that will update if there's a new patch. The process is the exact same
is there anywhere to like gx loader the super smash bros brawl and somehow mod that wbsf file so it can have universe it? sorry if it’s hard to understnsd what i mean. i’m new to nodding the wii so i’m not familiar with like wii modding vocabulary lol
Love your content bro!!! Awesome
What is the difference between the version of Dolphin included with Project+ and the regular version of Dolphin?
Is the boot.elf important if you already have one for ctgp?
Nah you can replace it and nothing will change
Everytime i try to load it via the project plus usb loader it goes to blackscreen
brawl works fine on its own
so the iso/wbfs is fine
what can i do?
idk i have the same problem but with project M EX Remix