ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2019
- Download Cura:
bit.ly/2xqvRB2
Learn how to slice 3D models in Cura:
• [Updated] The Ultimate...
Have you been wondering how to 3D print with the Cura 4.0 slicer over a USB cable? This video covers how to setup a print and control the printer manually over a USB cable. In addition, some helpful tips and tricks are given throughout.
Join the community discord:
3dnow.cc/discord
Awesome 3D Printers:
~$180 Creality3D Ender-3: bit.ly/2M0WaDK
~$360 Creality3D CR-10: bit.ly/2Aq7O9B
~$430 Creality3D CR-10S: bit.ly/2K8lBBu
~$390 Creality3D CR-10 Mini: bit.ly/2mXnc41
~$325 Tevo Tornado: bit.ly/2v37glc
~$250 Zonestar Dual: bit.ly/2LDjqLU
~$190 Tevo Tarantula: bit.ly/2OwD5L1
~$180 Alfawise U30: bit.ly/2StljtR
Follow me on Instagram - / 3d.now
Follow me on Twitter - / 3dnowprinting
Subscribe to get notified when I post a new video! bit.ly/2LQabXK
/ 3dnow
Music: 'Great Days' by Joakim Karud - / joakimkarud - วิทยาศาสตร์และเทคโนโลยี
![[Updated] The Ultimate Beginner's Guide to Cura Slicer!](http://i.ytimg.com/vi/l_wDwySm2YQ/mqdefault.jpg)
Check out my Cura Tutorial for beginners! th-cam.com/video/eUNTlb5pEWA/w-d-xo.html
Thank you!
What kind of USB cable does the CR10S use?
Ms vortex w25
Ask Holy Spirit to teach you and to guide
you. I would recommend the TH-cam Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).k
Thanks...very clear and concise. I was connected and printing as soon as you told me I would have the option to print over USB or Save!!!! Keep up the great work.
As a beginner for 3d printing this video help me by so much! Thank you for being simple and straight forward I couldn’t have asked for a better tutorial thank you!😁
Thank you for this video. I set up my Ender 5 Pro and used Creality Slicer 4.8. Your video taught me how to install and use everything. Thank You!
Hey man thanks for sharing this video I had already figured out how to print successfully from the test prints and with your help I am now currently printing something from my laptop it is awesome thank you so much and 3D print until you run out of filament
Ask Holy Spirit to teach you and to guide
you. I would recommend the TH-cam Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).r
Brilliant vid. Thank you so much. Everything is up and running now (Windows10, Cura 4.7.1).
I teach middle school SmartLab and I am new to 3D printers but have wanted to learn for a time now. I did all the steps but could not figure out how to print USB your video was very detailed thank you.
Thanks Bro!!! I could not find how to do it with the Crealty Slicer Software, but now I finally did it with the Ultimaker Cura. Nice tutorial!!!
I loved your video, this really helps with using the USB cable with my printer.
Exactly what I was looking for! Thanks!
much better than the creality tutorial, thank you!!
Hi 3D Now, followed these steps & found it so easy to setup my Vyper printer to use via USB & to learn how to use Cura a little easier, thank you so very much..regards...(Steve..
Thank you. i needed this
Thanks for your video. I'm new to 3d printing and it was a great help!!
This was really helpful for me today.
Thanks a lot man, you have saved me. I will follow you.
This was the video I needed I could not see how to work this bah. Thnak you.
Hey! I have plugged in my printer to my computer but cura is telling me to connect my printer still? Have I missed something? Thanks.
same
Thank you very much and I appreciate your work.
How do I add the play button And that I'll see where the nozzle is at any moment in cura?
Thanks!!!! This video helped. 😀
Thanks for an easy-to-understand video! Since it's been a couple of years, would you say the feature has gotten better?
This is a perfect video,thank you very much…
Thanks for the help.
Nice tutorial!! I have a question there is a way to control setting while is printing via USB?
Thanks
Thank you so much ! I needed to start printing some facial protectors for my Hospital ( Spain ) and my SD card reader was not working.
Lemme guess.. they didn't take them because there was no way to prove they were printed in a sterile environment? Or is Spain hurting that bad? Lol. "Sure, we will take these potentially covid-infected items and strap them to our faces!"🤣🤣🤣
Excellent work 👏 👍 👌
hello super video is it possible to turn off the pc to sleep at night and resume printing during the day when the printer is stopped? Thank you for your reply !
we use ender 3 pro and cura. With the use of a USB cable, we connect ender 3 pro to PC. But in cura that is not connected. what is the extra setting we gonna do for this?
Cura is supposed to give you complex help in your 3d manufacturing (millions of settings). However I too advise against printing via USB. Firstly it hijack the inner software of your printer. This way my CR-10s just wasn't able to sense the missing filament. Feeding new filament for a model in progress (after pausing), resumed the printing with 1 mm offset on Y axis. Using the jog option in Cura, did move the bed by 1 mm, but the printing remained offset, ruining the thing. Printing from Cura brings no advantage, but only disadvantages. Did I mention that Cura tried to start a support in the air (while slicing)? No good analyst seems to be involved in the development of Cura even if it is version 4.4.1 (actually version 15.04.6 +++)
Cura doesn't seem to recognize the printer on my mac. Also, when I leave the usb plugged in while the printer's off, then I turn it on, it sounds like a car alarm coming from the board.
i have the same issue ... if you find out the solution help me with that ,, best regards
@@ahmedaljohaniycat1798 the car alarm noise happens when something is going wrong and you need to unplug the printer fast
You mentioned that little things that could turn off the connected computer would force the print via cura to stop. I just got a new printer so that I could use Cura rather than my XYZ model which used its own slicer. Should the computer priting printing with Cura not also be used to print to the XYZ? Ie I load a long job to the Cura / Ender 5+ and while I wait use the same computer to print to the XYZ printer also attached by a separate USB? Have plenty of memory and disc space. EX Can I run them in parallel?
I want to save the file on the sd that is in the printer. I do not want to plug and unplug the sd card but I do not want to leave my computer on also.
Thank you so much 😊 I gave you a follow
THANKS!!!
Can you get a live visualisation of the print as it’s printing? So you can say watch it on a second monitor?
Win10, Cura (4.6.1), Ender3 (1.1.6.2). No need to install any USB driver and everything work fine. Thank you
thanks much needed
Good to know as my touch screen on my tenlog tl d3 Pro stopped working so at least can still use the printer until new screen arrives thanks
Thanks for the tutorial. I have a question about the system. When I finish slicing the model it doesn't show print via USB it only show save to file and preview. What can I do to fix this?
You ever figure out the issue?
@@MelaLabelle click on the little hook in the corner next to save to file
thank you so much
Hi love your video followed all your instructions but then didnt print anything is there something i did wrong or something i need to press to start print
i've got an Anet A8, i installed the driver, bought a new USB cable, whne i connect the printer it shows the driver on com and ports on the device manager, but the printer shows as not connected on cura or repetier (i tried the latter as well, to make sure it was not only the cura), what more can i do or need to do to connect the printer via USB cable.
Will it work with USB and SD card both plug in to the Ender 3? Can you save to SD card connected to Printer from PC?
Can someone tell me what type of head is on that USB cable at the printer? Is it a mini b
Is that a micro USB that was plugged into your 3D printer? Is this an option for the CR-6 SE?
My laptop is unable to read the printer when connected. Cura doesn't show my printer in the monitor tab even though I have already added my printer. Is there any kind of driver to be installed in the laptop first?
I am stuck.
Awesome thank you
Got a question, what kind of cord did you use to connect your computer to the 3D printer?
It's usually provided with the printer.
For ender 3 it's a micro usb, you can check around the printer and see what kind of port you have and then get the cable if you don't have it.
@@razvan-sorindumitru719 it’s actually mini usb
can I change or in/out material to ultimaker 2 with this methot too?
Does the ender 3 come stock like that or do I need to buy an extension?
"i was amazed how its actually saving when i unplug the power cord" HAHA!
Must be the compruter running while printing? thanks.
I'd like to use cura with my tronxy but usb will not connect works on repetier when I plug in
hello. Can you explain what type of USB cord to buy because my Ender3V2 did not come with a USB cord. Only the power cord. Thx
Is there any way I can change my port manually, cuz my printer DO NOT shows up when I plug it in my laptop. It works with an older version of Cura however as I can manually select my com ports.
Thank you, my creakily friend 10 mini had sd reader problems and I did not print for 4 months thinking I had to buy a motherboard.
Thanks dude. My SD card got corrupt so I used my USB instead :)
Hi!i have a question when im starting printing some models (founded on the internet) my print starts but its like can't melt the filament.When I have to print some models which are in micro SD(like dog,cat,pig) the models are perfect,what im doing wrong?(sorry for my english)
I have tried to print via usb on my SUNLU S8 printer but it will start out good then it will just randomly pause for a few moments then start back up leaving a puddle of filament at that spot. Sometimes it will just stop all together I have tried every setting as far as baud rate and made sure that it was set for the proper speed but no luck. I have tried it with Repetier Host as well as Cura. Tried new USB cables and all but no luck. Will only complete the print via SD card with no problems. Can't find any topics about this problem. What do you think?
A question. Can I just use the usb-pc-to-printer connection to simply copy gcode files over to the mounted sd-card on the printer?
So that I can print using the file on sd-card as usual, without the fear of pc sleep?
That was my question too. I hate handling the microSD card back and forth. But I also don't want to take a chance the print will fail due to a stupid Windows 10 update!
Please do update here also if you find a solution for that
Hi,
I have a Creality CR6 Max and I am triying to connect my printer to my computer with a USB ? mini USB cable.
I did everything you said, but in Cura, under the monitor tab, it dosent show that am connected like you (/dev/cu.usbserial- etc...) I have nothing showing.
I checked in my device manager, and it shows that the driver CH340 is connected in port 5
Anny other information I must have to make it work ?
Any idea if you can connect to cura for linux with an Ender 3?
Is it possible to monitor what layer you are on this way? Like the preview, except in real-time?
I have the same question, did you find the answer to this?
Thx. I misplaced by little thumb drive with the Micro SD so until I get a new one I was trying to print via usb
on my cura the printhead settings are diffrent from yours ( X min -20 and Y min -10) are ok ? the rest are ok i use reprap
I copied your print setting in this video but when I slice it shows 01:35 as my print time estimate, how are you saving half an hour???
I'll be printing soon and this seems far superior to walking around with and SD card in your hand and having to mess with the relatively clunky controls on the printer itself. As far as having your computer tied up for the print, on Windows machines you can set the priority any particular program has relative to others. I would think that if you set Cura to have the highest priority (and disabled sleep on the machine) there shouldn't be an issue. EDIT: I connected the Ender 3 with the usb cable, turned it on, but Cura can't see it. I've tried uninstalling and reinstalling Cura (and clearing out the saved data). 'm using the latest firmware from Creality but it's a no-go.
im having the same problem
You need ch340 driver
@@hawkthegamer8372 You need ch340 driver
Hello, is there anyway to preview the print like in slicer mode but with the nozzle moving around actuating the current gcode command?
I discovered it in Gcodeprintr on Android but I can't seem to find any way to do the same on pc
Just watch the video at 6:30min for like 15 seconds.
So if I connect my laptop to the 3-D printer I pretty much cannot use the laptop for anything while it is printing? If that's the case I would probably just rely on the flash card just above it any mishap.
hello, I have the Wanhao Duplicator i3, and I can not do what you are doing with USB, is like is not recognised the USB cable; because the SD card I think is not giving the sufficient Watt to the SD and USB port? what do you thing, any suggest?? thank you.
do you have to be signed in to go to moniter?
i can jog and preheat, which is amazing, but nothing happens when i push "print via usb" -- I'm using a TronXY x8 with the CH341SER driver.
is there any way to do this with custom added printers?
What type of USB cable does it use
Hi. How did you install usb drivers? I can't connect the printer. In device Manager an unidentified usb device. Cura 4.6.1.
@Ryan George yo you just saved me. thanks man.
@Ryan George This is the answer thousands have been googling. lol thanks so much!
@@TummyRubz wtf did he say comment is gone lol
@@TboneSTEAK111 lograron saber que decía el comentario? me ayuda?
coming from matter control i am disappointed there is no real time print monitoring in cura.. in matter control you can see it printing layer by layer via usb.. i dont want to change sd cards all the time though wish there was a way to save to sd while its in the control box already
Thanks for the videos. I am an infant in the 3 d world. I keep trying to connect my pc using win 10 on 3 v2 but it keeps telling me something like comm error. I can get a screen shot for you if requested no problem. I hope you are able to help. I am not a forums kind of guy. Thanks again
Should the internet be disconnectet? because i had problems of print abortion. I think its when windows searches for updates or the graphic drivers.
How did you turn off the hot end fan? what is its purpose?
what if you have multiple printers hooked up
I want to buy the monoprice select v2 and i have a macbook. Can i do this?
Nice!
i have the latest update but your cura looks very different from mine and my printer won't connect when i plug it in
Thanks for the tutorial but I really don't see the point in the monitor. What's the point in it?
Can you help me I'm trying to connect my 3D printer my vector 3 3d my PC I do not know how to do it every way I've gone through to do it on the manuals will not let me get onto the site to download the software if you can help me please I'll be very grateful
Some one help please for some reason my 3d printer connect through USB connection but then printer doesn't work when i try to control it from the PC and the build plate tmeoture control doesn't show eather
Hello boss what how to solve print setup disable
Mine is not working well. there seems to be so little control. I think it only likes its own slicer. it brings in my STL and its the wrong size, but other software gets it right. on sd card I get 2 icons for each file and its not changing pages/I can only see part of the folder. options are greyed out in software, monitor page. I have used it successfully but after running 8 hours yesterday it is buggy today. It was a little buggy yesterday. I put the gcode in the fokoos slicer and it only per heats to 200 not 215. ... finally it is working but I did nothing to fix it. I was going to reflash the board. That took 3 hours. I wounder what board is in it?
I never get the screen on “monitor” tab, so it does work. Pleaee help me. The canle fits, the computer does tge “dun duh da dun” so i know it’s recognizing something is being plugged in, and the printers motherboard is being powered by it because the lights turn on, so what’s wrong?
Ya conecte mi impresora 3d a la computadora pero no la reconoce, que puedo hacer para que la reconosca
Can you use g code to turn the printer off and on
When I connect the usb cable to the printer the monitor tab still say to connect a printer,why?
so is there a way to see a live animation of gow far the print is?
It will show you the percentage complete and time elapsed.
when I tried this with my CR 10 I plug in the USB cable and the screen on my control box lights up!!!!
Nothing changes in Acura 4.80
same with me
There is absolutely nothing that can be done I can't not communicate over USB with my cr-10. I've installed all the drivers imaginable over and over ad nauseam. I followed every tutorial known to man to the letter and nothing works I am not computer illiterate I programmed remotely for the University of Michigan's Laboratory Network. I've ran so where is generic Unix and Linux boxes for decades. I ran a mail to server that had an instruction manual that weighed 27 lb LOL. So I'm not exactly illiterate when it comes to understanding computers. This just got me so fundamentally stumped that I've totally given up something that I never do. I've even considered buying a different 3D printer as a result
Why dose my printer print the same thing again and again I don’t know why but maybe It’s the tf card that I need help with please tell me how to store 3d models in the card so it prints it
Ok so I’m like very very new like I just got it and I want to know how did u connect the usb to your computer to ender 3
like i dont even have the printer yet
i thought you could see the layers being printed
did you use micro usb cable
Nothing I have done will let Cura monitor my Snapmaker A350. I can transfer files, but when select “Monitor”, it’s showing the printer isn’t connected. Neither USB connection nor wireless shows me connected. Searching doesn’t find it.
Have downloaded the correct driver. No change.
Any Ideas? Anyone?
thank u ,,,, my cheap micro SD card that came with printer died :( and i need to print somet ASAP :P
Mine too