How to Replace Water Pump 1994-2004 Ford Mustang 3.8L V6

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00265
This video shows you how to install a TRQ water pump in your 1994-2004 Ford Mustang. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Ford Mustang
1995 Ford Mustang
1996 Ford Mustang
1997 Ford Mustang
1998 Ford Mustang
1999 Ford Mustang
2000 Ford Mustang
2001 Ford Mustang
2002 Ford Mustang
2003 Ford Mustang
2004 Ford Mustang
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obzS/1AXAA00013
• Pry Bar 1aau.to/o4s/1AXAA00020
• 10mm Socket 1aau.to/obwJ/1AXAA00017
• 13mm Socket 1aau.to/obTx/1AXAA00015
• 15mm Socket 1aau.to/obTx/1AXAA00015
• 19mm Socket 1aau.to/oawI/1AXAA00043
• Coolant Funnel Set
• Pulley Removal Tool
• Pliers
• 1/2 Inch Socket 1aau.to/obWh/1AXAA00016
• 5/16 Inch Socket
• 1/2 Inch Ratchet 1aau.to/oawI/1AXAA00043
• Ratchet 1aau.to/obWh/1AXAA00016
• Torque Wrench 1aau.to/oaZf/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oJI/1AXSS00035
• Gloves 1aau.to/oaJo/1AXSS00048
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oaou/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oaa2/1AXAA00065
• Pick 1aau.to/oWX/1AXAA00037
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Sanding Block
• Wheel Chocks
• Wire Brush 1aau.to/owm/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Ford Mustang 4th Generation 1994-2004: • Ford Mustang 4th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@brandonhuber7490]

power sterrimg pulley was a SOB to get off. No Rust, just stuck real good. Broke my plastic pulley and spent 2-3 hrs using a puller. And not breaking everything.

[@filmjunkie4034]

Always great & detailed videos ⭐️⭐️⭐️⭐️

[@mitchellportee150]

Awesome video

[@dryter9727]

Thx to show me how to. Its common sense. I mean i already started. Just wanted to know if you where removing the powerstearing before proceed.

[@jessiematamoros7100]

"I have a quick question. After watching your video, I noticed that you didn't use any water pump RTV sealant. I own a 2006 Mustang V6 and I want to do some preventative maintenance by replacing the water pump, since I need a new radiator anyway. I figured, why not replace the water pump along with all the hoses and the serpentine belt too? My question is, my new Motorcraft water pump comes with a metal gasket. I was reading the manual, which says to add RTV to the gasket. However, I have seen your video and others that don't recommend it. So, should we add RTV or not?"
Thank you in advance.

[@michaelangelle3109]

good video except for the fact the 98 i worked on had more parts covering the water pump 🤨