I have the same trans, Do I need to re-pin my 3rd ls harness? Using a LQ9 SWAP. What Would BE The process? Good stuff u got my thumbs up 💪👍n subscribe .. Good stuff keep it up
My guy I came across a gen 4 L96 w/ 6l80e am trying to put this setup in my 05 Tahoe Gen 3 I got the control for the 58x-24x but as far as that am still trying to wrap on how to make the 6l80e work do you got any pointers? Thanks man
Hi,when you mentioned massaged trans tunnel could you please elaborate cut/fabricate/weld or some hammer work o ly,currently doing a ls3 4l60 swap into a 87 iroc using all Holley blackheart components, motor/tranny mounts,la swap headers and holley tru duals,would love to run the 6l80,did you fab your own tranny mount,thank you.
I need this done to my car and how long does it take?Do you work for Hawks or just had your work done there I'm familiar with that place I bought all my parts there.
@@DillardTuned Yes i am.. the The blue iroc that's in my avatar is the car im going to do.. It currently has no motor or trans.. 12 months and im buying ..currently working on suspension
What are you using as a transmission controller, been wanting to do this with my ls3 conversion on my trans am, but all my research has led to a dead end on what to use to control transmission. Any advice or parts I need would be appreciated, thanks in advance.
@@DillardTuned did you swap entire harness out of a 5th gen? I’d like to keep A/C and everything I’m not a wiring guy but I’m about to dive into it just curious where I needed to start looking, thanks
Doing a 6l80 swap in my gutted 80 Malibu. Chose 3.40 gear based off my silverado with 6l80. Should be a whole lot of fun. Hopefully by the end of the summer it’s together and moving under its own power.
@@DillardTuned In regards to the cross member and 6l80??? I don’t them both and changed to BMR… either way I was just poking at you bro no hate… check out my genV LT swap though with “6L80” 😁 TSP stage 3 cam a few little things I can afford… Salute 🤜🏾
That thing is crispy 🔥🔥🔥
No doubt!
Plus 2 gears! That's awesome!
That’s badass bruh
Just had mine rebuilt again less than 100 miles circle d level 4
I have the same trans, Do I need to re-pin my 3rd ls harness? Using a LQ9 SWAP.
What Would BE The process?
Good stuff u got my thumbs up 💪👍n subscribe ..
Good stuff keep it up
Did you have to modify the transmission tunnel to fit the 6l80e in the tunnel of the camaro? I have a 87 4dr cutlass.
My guy I came across a gen 4 L96 w/ 6l80e am trying to put this setup in my 05 Tahoe Gen 3 I got the control for the 58x-24x but as far as that am still trying to wrap on how to make the 6l80e work do you got any pointers? Thanks man
Hi,when you mentioned massaged trans tunnel could you please elaborate cut/fabricate/weld or some hammer work o ly,currently doing a ls3 4l60 swap into a 87 iroc using all Holley blackheart components, motor/tranny mounts,la swap headers and holley tru duals,would love to run the 6l80,did you fab your own tranny mount,thank you.
All hammer work
I need this done to my car and how long does it take?Do you work for Hawks or just had your work done there I'm familiar with that place I bought all my parts there.
What gear ratio does it have? Thanks
How far does the the transmission pan stick out from frame rails
What did u use for crossmember ?
So can we get this tunned before you would ship?And how do i ask for it. Cause when im ready i like this and would definetly go with this
Are you planning on buying a power plant from us?
@@DillardTuned Yes i am.. the The blue iroc that's in my avatar is the car im going to do.. It currently has no motor or trans.. 12 months and im buying ..currently working on suspension
What are you using as a transmission controller, been wanting to do this with my ls3 conversion on my trans am, but all my research has led to a dead end on what to use to control transmission. Any advice or parts I need would be appreciated, thanks in advance.
The stock e38 pcm
@@DillardTuned did you swap entire harness out of a 5th gen? I’d like to keep A/C and everything I’m not a wiring guy but I’m about to dive into it just curious where I needed to start looking, thanks
5th gen engine harness then meshed into the 3rd gen harness
@@DillardTuned good deal now I know the direction I need to go, thanks for the reply
Welcome sir
Was there any mods to the trans tunnel?
Slight messaging
What rear end gear does the car have?
Hawks 8.8
I can't remember specific gear I'll need to look at tune
Doing a 6l80 swap in my gutted 80 Malibu. Chose 3.40 gear based off my silverado with 6l80. Should be a whole lot of fun. Hopefully by the end of the summer it’s together and moving under its own power.
It's such a sweet trans swap its not even funny. Reay makes anything with some power giddy up and move out
@@DillardTuned yep. I got a forged 370 11.5 compression. Should be sweet. Car is pretty light.
Sorry bud but I did it first and BMR works better
Um? Congrats? Lol. I said hawks first 6l80 swap.
@@DillardTuned In regards to the cross member and 6l80??? I don’t them both and changed to BMR… either way I was just poking at you bro no hate… check out my genV LT swap though with “6L80” 😁 TSP stage 3 cam a few little things I can afford…
Salute 🤜🏾
@@J2A61 I will check it out for sure man!!!