HOW TO LS SWAP ANY VEHICLE - 5 THINGS YOU NEED -- LS Swap Basics Overview (LONG VERSION)

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024

ความคิดเห็น • 1.3K

  • @JovaniDanteGriego
    @JovaniDanteGriego  4 ปีที่แล้ว +63

    STOP: BEFORE YOU COMPLAIN ABOUT THE LENGTH OF THE VIDEO GO HERE:
    th-cam.com/video/DucuEkh9yJE/w-d-xo.html

    • @brock2872
      @brock2872 4 ปีที่แล้ว +1

      Jovani Dante Griego well I have a question, I have a Audi A5 2009 can I put a ls in there ? And pass inspection

    • @rectro6552
      @rectro6552 4 ปีที่แล้ว +3

      B Rock really depends where In the world you are, some countries are much more lenient than others with engine swaps

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      @Elittiger Savage the biggest problem with doing late model cars is getting everything to communicate. You'll need to find someone that can work with can bus. Swapping it is easy, but getting anything in the car to work is another story. Honestly 2010 ss Camaros cost as much as it'd take to swap it. It's not impossible just not worth it

    • @brock2872
      @brock2872 4 ปีที่แล้ว

      Rectro YT New York

    • @brock2872
      @brock2872 4 ปีที่แล้ว

      Jovani Dante Griego yO j what’s some good headers to use on my 6.0 ? Vortex

  • @Rangerpl1322
    @Rangerpl1322 5 ปีที่แล้ว +595

    The reason people ask how to do a swap before they buy the car and the engine is so they know what they're getting into before they commit money to the project

    • @papergatorzfedducca7998
      @papergatorzfedducca7998 5 ปีที่แล้ว +44

      Exactly!!!!

    • @raulsalinas3342
      @raulsalinas3342 4 ปีที่แล้ว +5

      Facts

    • @Juliopaints
      @Juliopaints 4 ปีที่แล้ว +18

      👍👍 You'd think that was a no brainier. Dude acts like a real 🍆 head

    • @FreddyFunderbunz
      @FreddyFunderbunz 4 ปีที่แล้ว +11

      @@andoniades well if you knew what you were doing you wouldnt be here

    • @obamasgrandpapi7925
      @obamasgrandpapi7925 4 ปีที่แล้ว +1

      CircleMeatSandwich ur confused

  • @W45Jasper
    @W45Jasper 10 หลายเดือนก่อน +9

    Best LS swap video that I've seen. Detailed, straight to the point without all the extra talk and useless rambling. Looking forward to your other videos. Thank you.

    • @theindustryfarm7405
      @theindustryfarm7405 9 หลายเดือนก่อน +2

      Some of the extra rambling is explaining clearance issues etc. which is pretty good info to know if you’re gonna swap a truck engine in a car 😂

  • @chunkycheese73
    @chunkycheese73 4 ปีที่แล้ว +621

    Start at 3 mins, you'll thank me later

    • @jusoltorres4685
      @jusoltorres4685 3 ปีที่แล้ว +10

      thanks boss

    • @mylesakatrm4388
      @mylesakatrm4388 3 ปีที่แล้ว +1

      You can't wait 3 mins? Do you have a lack of patients? Maybe go listen to the song by G n R's called Patients, let Axle Rose teacher you a thing or two about the word! 😉 ✌

    • @diegosc985
      @diegosc985 3 ปีที่แล้ว +31

      @@mylesakatrm4388 Do you mean patience?

    • @foevaru8536
      @foevaru8536 3 ปีที่แล้ว +12

      @@diegosc985 ah hell na 😂 man said patient

    • @dbwilly9281
      @dbwilly9281 3 ปีที่แล้ว +2

      Goat

  • @TheZmt325
    @TheZmt325 4 ปีที่แล้ว +90

    This has confirmed my shopping list.

    • @coryhixon8307
      @coryhixon8307 3 ปีที่แล้ว

      Yup...I'm getting groceries instead😂😂😂

    • @ryzefn3487
      @ryzefn3487 3 ปีที่แล้ว

      Fax😂

  • @nasirsanchez9142
    @nasirsanchez9142 5 ปีที่แล้ว +89

    Cuz said "I can't help you, in your pretend scenario..." 😂😂😂

  • @chevysttruck
    @chevysttruck 5 ปีที่แล้ว +51

    One of the biggest issues with swaps is the need to remove VATS (vehicle anti theft system) from the computer. This can now be done using LS droid to pull the stock flash and software like EFILive or HPTuners to remove vats right at home. No more needing to spend $600 on hardware or sending it to some shady ebay guy that takes 6 months to return your computer.

    • @quantumq9725
      @quantumq9725 7 หลายเดือนก่อน

      @chevysttruck thank you boss I'm working on getting my two door Oldsmobile cutless Supreme sl to get ls to it parts are interesting to get .

  • @kumara5492
    @kumara5492 3 ปีที่แล้ว +4

    Nice video. I am a backyard guy working on my car as a hobby on weekends and came across this video, I am gathering as much information as possible on my future project which is converting my Toyota Prius V ( that's done 200,000 so far and still running strong) into regular gasoline gas under $1500 by putting Toyota Yaris or Corolla engine into it some day when the hybrid battery gives up. I prefer gasoline because I take a lot of road trips and fixing a gasoline car is easier than hybrid car if it ever breaks down in a no man's land. Thank you, I subscribed.

  • @ME-L3U
    @ME-L3U 4 ปีที่แล้ว +33

    Jovani: more fuel efficient
    LS: *laughs in 3 mpg*

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      😂😂😂😂😂😂 ok this is gold
      But really just lean them out to like 15/16:1 af under 50% throttle

    • @vl639
      @vl639 4 ปีที่แล้ว +3

      Need the 4l60, 4l80, or the 6l80 to get the mpg you’re looking for.

    • @ellenorbjornsdottir1166
      @ellenorbjornsdottir1166 4 ปีที่แล้ว +5

      LSes can actually do 40mpg

    • @bradhaines3142
      @bradhaines3142 3 ปีที่แล้ว +2

      @@ellenorbjornsdottir1166 with what mods?

    • @trashbandit2449
      @trashbandit2449 2 ปีที่แล้ว +2

      @@bradhaines3142 with a car, tall gearing, a 6 speed, and a tune. This will get you above 30, weight reduction and aero can push you over 40 likely.
      A c5 corvette would be ideal for this, or a miata.

  • @SkiDooRydr
    @SkiDooRydr 4 ปีที่แล้ว +41

    TLDW Basics-
    *Engine:* 2001+ 4.8/5.3/6.0 ; try to find the most complete you can. Try to find a "complete pull out"
    *Motor mounts:* Buy or make whatever is out there for your car already. If its a unique swap, you're on your own to design.
    *Transmission:* Auto 4l60 (lower power build) /4l80 ; Manual T-56 (from GM vehicle), NV3500/NV4500 (not for racing), *TH350/TH400(requires mods), avoid 700R4/200R4
    *Engine/Trans control:* Get harness and ECU with your engine (pay to convert or do it yourself), Megasquirt/Holley Terminator
    *Fuel:* Electric fuel pump (255LPH), fuel regulator depends on intake style (returnless or return)
    Exhaust Manifolds that fit - Custom of premade for your swap
    Oil pan that fits - Lots of options for swaps

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      Thanks!

    • @romero.4089
      @romero.4089 4 ปีที่แล้ว

      A CTS V oil pan can fit and will it be better?

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      @@romero.4089 it depends on your car. Most people use the F body (2001 Camaro SS) pan

    • @jonnypiper5378
      @jonnypiper5378 4 ปีที่แล้ว

      The Last Honk he forgot about the drive shaft

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      @@jonnypiper5378 cut to fit or custom made

  • @MaxMarcotics
    @MaxMarcotics 2 ปีที่แล้ว +6

    For anyone looking at T56s: I think it would be useful to mention that corvette T56s are difficult to work with and that's the reason you generally find them cheaper.. Corvette T56s use a different tailhousing as all of them use torque tubes rather than driveshafts. To convert these particular T56s to use a driveshaft requires a lot of work and money as you have to mess with the internals of the transmission.
    Generally, you can look up the # on the plate of a T56 to find out what vehicle it came out of, but corvette T56s are easy to tell apart from ones out of other cars such as F-bodies because there is no tail housing (more square in shape, and a shaft sticking out the back with splines) whereas other T56s have a tail housing (more tapered rear, connection for the driveshaft rather than a spline shaft that the torque tube slips onto.)

  • @yausaptheshasuabary180
    @yausaptheshasuabary180 3 ปีที่แล้ว +6

    This video makes me feel better about the state of my garage. Thanks, man!

  • @ConcussedGaming
    @ConcussedGaming 3 ปีที่แล้ว +12

    If its from a truck and going in a car:
    Intake and oil pan/windage tray are almost always a must. Wiring harness engine mounts and headers become the next challenge. Radiator also can be problematic. Ac and ABS might need to be relocated/removed.

  • @KurNorock
    @KurNorock 4 ปีที่แล้ว +23

    A lot of people in the comments completely missed the point.

    • @rubenlozano8175
      @rubenlozano8175 4 ปีที่แล้ว +1

      Kur Norock allot of people are snow flakes

  • @tehpanuychikon168
    @tehpanuychikon168 3 ปีที่แล้ว +12

    Amazing helpful info! I plan on doing one on a 79 Firebird........ive never done it before nor am I a mechanic by any means 😬

    • @nah6430
      @nah6430 3 ปีที่แล้ว +3

      How's it goin? Lol

  • @sargentsakto9236
    @sargentsakto9236 4 ปีที่แล้ว +25

    Amazing what people whine about the video. It’s too long, it’s too short, it took too long for this, you didn’t spend enough time on that, your hair is too long, the color of your tee-shirt doesn’t match your pants, the floor is dirty, I could hear the neighbors dog fart, get a grip people.
    No matter what your building use a 4L80 transmission. It’s no more money and is just a better transmission. Especially if you’re going to abuse it even a little bit. And I know everyone is going to do at least a couple burnouts and hard off the line acceleration.

  • @texasbodega
    @texasbodega 4 ปีที่แล้ว +2

    Thanks Jovani Dante Griego, I had a 54 Chevy 3100 with 283, sold it now I have a 58 Chevy Apache with 235 and have the means and time to put in for LS swap. This video gave me the confidence and know how (somewhat) to do so, at least the steps to take to get there so thanks for this Brotha.

  • @lamarsmall3261
    @lamarsmall3261 5 ปีที่แล้ว +26

    4.8ls in 84 Toyota 4x4 truck still working out the bugs but so fun it's a bit of a deathtrap

    • @toomanyprojectstx
      @toomanyprojectstx 4 ปีที่แล้ว +1

      awe man. i have the same truck. dont tempt me. lol

    • @mr.8k.408
      @mr.8k.408 3 ปีที่แล้ว +1

      I’m buying a 84 Toyota pickup for a ls swap lol

  • @danielibarra195
    @danielibarra195 5 ปีที่แล้ว +13

    Great information I have done a few engine swaps and I'm about to attempt my first ls swap from a 2003 5.3 suburban to a 78 z28 Camaro... Fingers crossed for my first time!!!

    • @curley1778
      @curley1778 5 ปีที่แล้ว +3

      Going to be swapping a 6.0 into my 80 z28 Camaro.

    • @bunythebeastgamer6920
      @bunythebeastgamer6920 5 ปีที่แล้ว +1

      Post some vids. Cuz I'm about to do a 5.3 in a camaro. 02 canaro

    • @nathanielbolden5053
      @nathanielbolden5053 5 ปีที่แล้ว +1

      Yall are good they make kits for those F-Bodies

    • @nathanielbolden5053
      @nathanielbolden5053 5 ปีที่แล้ว +1

      Im thinking about doing a 86 Z28 4.8swap

    • @charlesrichardramirez
      @charlesrichardramirez 4 ปีที่แล้ว

      Daniel Ibarra Any updates on how that went?

  • @dmvchannel3280
    @dmvchannel3280 5 ปีที่แล้ว +5

    5.3 ✅ Miata ✅ cash....needed 😆
    Great video!

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +2

      Thanks man I appreciate it! The miata is going to be rad!

  • @treyvondee9421
    @treyvondee9421 3 ปีที่แล้ว +5

    Great video, i appreciate it your videos are helping me with my LS swap for my 87 caprice

  • @matthewsiler6085
    @matthewsiler6085 5 ปีที่แล้ว +14

    I don’t know why this video doesn’t have 1m+ views.

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +1

      Soon!

    • @charlestorruella8591
      @charlestorruella8591 5 ปีที่แล้ว +3

      I do to much bullshit talk nit enough tech talk

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      @Beyblade420 th-cam.com/video/DucuEkh9yJE/w-d-xo.html

    • @dewaynejames3456
      @dewaynejames3456 4 ปีที่แล้ว

      I think the video answer's a lot of questions at least it did for me I got more answers than from any of the other ones I have watched or asked the wiring was my main problem ever one else said I had to buy a harness which I am sure is easier but it is also 700 dollars I can solder a few wires together a lot cheaper than that

  • @cesarchavez507
    @cesarchavez507 5 ปีที่แล้ว +4

    You’re the man bro. Just started a 5.3 swap on a 69 c10 stepper, this made me more confident lol

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +1

      Hell yes dude. C10 life!

    • @502MS
      @502MS 5 ปีที่แล้ว

      Awesome. We have the goods at lsxeverything.com

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว

      @@502MS Hit me up if youre interested in some promo!

    • @hardball107
      @hardball107 4 ปีที่แล้ว

      Just did one on my '68 C10, save yourself some time and money and buy a weld in motor mount kit off Ebay for $50. Raise the engine up 1" and use the stock pan, saves $400 and the sump will not be below the front cross member and the front of the pan will not hit the steering drag link. Slide it back 2" also, never hurts and leaves you more room for accessories.
      Easy-peezy with the mount kit, just cut the provided plates and weld them to the existing crossmember. The mount has ploy bushings to isolate the engine and makes removal and installation a breeze.

  • @vl639
    @vl639 4 ปีที่แล้ว +9

    Any Chevrolet manual or automatic will work with an ls, but keep in mind a 4l60 or 4l80 will be a 4 speed auto. A 6l80 is a great 6 speed auto that will work with your build. BP makes the best harness for LS builds. I’ve done more then 50 LS swaps from square body’s to first gen corvettes.

    • @seanmchale6860
      @seanmchale6860 4 ปีที่แล้ว +1

      You do any rangers.there is forums on it but not a crazy amount if info

    • @vl639
      @vl639 4 ปีที่แล้ว

      Sean McHale you talking about ls swap or coyote?

    • @bryanstroup864
      @bryanstroup864 2 ปีที่แล้ว

      What is BP stand for sorry new to this

    • @vl639
      @vl639 2 ปีที่แล้ว +1

      @@bryanstroup864 it’s the name of the company that makes the harness. They also have a package with harness, sensors, and unlocked ECU.

    • @blakelip3
      @blakelip3 2 ปีที่แล้ว +1

      What about manual transmission? Not named tremec or t56

  • @sarblade
    @sarblade 4 ปีที่แล้ว +1

    Just came across your video as I am researching my build, '57 Chev truck to an LQ9/4L80e. I do have to say that I loved your video, lots of info, I'm subscribing! To hell with those that think its too long, they have attention spans a of a bird!

  • @ferrugenfish
    @ferrugenfish 4 ปีที่แล้ว +9

    Anyone else feel like they're in trouble for watching his video? Dang, sorry I clicked.

    • @asmallpug
      @asmallpug 3 ปีที่แล้ว

      Homies just yellin at us🤣

  • @rogerclyde2720
    @rogerclyde2720 ปีที่แล้ว +1

    Would be cool to see a video about cleaning and organizing a garage.

  • @pistolpete7280
    @pistolpete7280 4 ปีที่แล้ว +11

    Great video, thank you for making this. Very informative! I'm currently looking to swap my formerly boosted 3.7l Mustang to a turbo ls

    • @woden925
      @woden925 2 ปีที่แล้ว

      How did it go still working on it?

  • @KevConc
    @KevConc 5 ปีที่แล้ว +7

    I love His Reality Check!

  • @CouchHam
    @CouchHam 5 ปีที่แล้ว +16

    Please do a video on the wire harness. I have a 5.3 with everything including trans. It has the red and blue harness connectors. Thanks

  • @mikesmith9564
    @mikesmith9564 4 ปีที่แล้ว +4

    I appreciate the vid bro!!! Looking forward to more in the series, don't worry about the length. The details need to be covered and I learned a lot.

  • @tinman9341
    @tinman9341 4 ปีที่แล้ว +7

    Great video! I was wondering what would be the simplest turn-key swap you could make. Thanks for taking the time and clearing up some basic things! 👍🏼👍🏼👍🏼👍🏼

  • @stevohmelike
    @stevohmelike 4 ปีที่แล้ว +2

    My best opinion to anyone, get a donor vehicle. You will have 80% on what you need. The 20% remaining will be 100% easier to figure out due to everything you will have due to the donor.

    • @connor3288
      @connor3288 2 ปีที่แล้ว

      I like the idea of a wrecked donor vehicle and using everything oem possible. Harness, cluster, ignition switch, computer, fuel system, evap system, exhaust, radiator, airbox, etc.. To me the biggest things would be how you do the exhaust fabrication and the big one, electrical system. On a gm vehicle maybe you could integrate the system into one, but on most swaps i would imagine it would be easier to have a split system, to have the gm computer for the engine, and keep original pcm/bcm in a newer car for everything else. You could try to make original cluster work, or make gm one fit. I like the idea of having the stock column/ignition switch to control accessory power and starter/lights, and then have the gm ignition switch dash mounted like some old cars, which would just be used for antitheft and engine run mode. And keeping the obd2 port would be nice.

  • @user-nw5xi7mu7w
    @user-nw5xi7mu7w 5 ปีที่แล้ว +93

    OMG GET TO THE SWAP

    • @in_the_building1
      @in_the_building1 5 ปีที่แล้ว +1

      G Money 🤦‍♂️🤦‍♂️🤦‍♂️

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +2

      th-cam.com/video/DucuEkh9yJE/w-d-xo.html

  • @marty_glenn
    @marty_glenn ปีที่แล้ว +1

    Got a 2014 e63 biTurbo. I want to do this to it and part it out and gut it. A real driver. Help? - Marty

  • @DrGand
    @DrGand 5 ปีที่แล้ว +9

    Good video. I swapped the old TBI 305/700r4 out of my '87 K10 in favor of a built 400HP carbureted 350/thm400.
    A lot of what you said even rang true for my "swap". Mount, bolt trans up, plumb wiring, plumb fuel, double check and done. I enjoyed the specifics you went into for trans and wiring options. Aside from those specifics this can really apply to swapping just about any engine into any vehicle.
    What's mind boggling, is that most of the people asking about LS swapping... have probably never swapped any engine into any vehicle before so even though this information is SO broad and SO basic it helps understand what the different stages of changing out an engine are; even if its the same engine going back in!
    Informative video.

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +3

      Hey thanks for the feedback! Yea it really is applicable to almost any swap. At the end of the day all youre doing is piecing a puzzle together

  • @princeansoni
    @princeansoni 2 ปีที่แล้ว +1

    Learned a lot in this vid dudes 😎😎

  • @justicewalking
    @justicewalking 5 ปีที่แล้ว +73

    Can I do an ls swap for a 08 tsx? Do I need the LS and do I need the 08 tsx? Also what's an LS swap?

    • @nv707
      @nv707 5 ปีที่แล้ว +13

      LSX in a Acura tsx? 🤣🤣🤣🤣🤣would love to see that

    • @nathanielbolden5053
      @nathanielbolden5053 5 ปีที่แล้ว +1

      Lmao!....

    • @romero.4089
      @romero.4089 5 ปีที่แล้ว +6

      You for real 😳 tsx man I mean fuck it LS SWAP EVERYTHING RIGHT

    • @ponchoz5365
      @ponchoz5365 5 ปีที่แล้ว +2

      I've seen a ls swap saturn so I'm sure you can do it in an Acura

    • @mayonholly78
      @mayonholly78 5 ปีที่แล้ว +4

      I HAVE SEEN A LS SWAP PORSCHE AT LS FEST IN LAS VEGAS

  • @tokinhaandre
    @tokinhaandre 2 ปีที่แล้ว +1

    Great job brother 😁👍 really enjoyed it

  • @xr640
    @xr640 4 ปีที่แล้ว +12

    Appreciate the basic info. on LS swap. Just transitioning from carb to fuel injection builds! Trying to educate myself on what I am getting into.

  • @luxurygeneration407
    @luxurygeneration407 6 หลายเดือนก่อน

    The Title says any vehicle. You pretty much told me i'm on my own. But it helps.

  • @jimmybaggs5342
    @jimmybaggs5342 5 ปีที่แล้ว +44

    I’d like to swap a turbo’d LS into a tesla, what do I need?

    • @mikesgsx420
      @mikesgsx420 5 ปีที่แล้ว +21

      For a Tesla LS swap you need a flux capacitor You can buy one at o'reilly auto parts make sure to buy the upgrade it 1 that generates a 121 jigga Watts

    • @davidbailey1721
      @davidbailey1721 5 ปีที่แล้ว +10

      A Tesla, an LS, a turbo, some paper clips, a roll of packing tape and set of fluffy dice. Job done.

    • @vitaminb4869
      @vitaminb4869 5 ปีที่แล้ว +7

      A "Turbo LS" sticker and fake muffler tips.

    • @charlestorruella8591
      @charlestorruella8591 5 ปีที่แล้ว

      An ls for one and at least one battery mayby a rear end

    • @antoniodgo100
      @antoniodgo100 4 ปีที่แล้ว +1

      You need a engineer lol

  • @mhfuXmonsta
    @mhfuXmonsta 5 ปีที่แล้ว +2

    just ls swapped my moms toyota sienna, thanks.

  • @Miguelspl150
    @Miguelspl150 5 ปีที่แล้ว +48

    6 minutes into the video and still in step 1

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +6

      You expect all this knowledge in 2 minutes?

    • @Miguelspl150
      @Miguelspl150 5 ปีที่แล้ว +4

      @@JovaniDanteGriego no but could have been shorter and number 1 it's very obvious. Of course you need an ls engine to do an ls swap. It be dumb if people tried and do an ls swap without the ls engine. Intake, accessory drive , motor mounts, oil pan what type of throttle body dbw dbc, ecm tuning, most importantly what car will the engine be going in will determine what you should be planning for

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +2

      @@Miguelspl150 The point of the video is not to be talking about specific cars, i can talk for an hour about just doing a c10 swap. Also, Im talking about types of LS engines, people who dont know and are new always assume they need an ls1 or ls2 . they dont even think or know about the truck engines.

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      @@Miguelspl150 th-cam.com/video/DucuEkh9yJE/w-d-xo.html

    • @jeremyhauser6193
      @jeremyhauser6193 4 ปีที่แล้ว +6

      @@JovaniDanteGriego I'm a mechanical engineer and mechanic. If you're going to create constructive content, and actually become an "influencer", be humble and accept criticism. It's not a pretend scenario to prior look at what engine variations meet correctly to which transmission. That's probably why you're broke.
      There's a reason why your video comments consists of 90% criticism.
      Your shop looks as messy as you talk to your viewers. Or should I say your people skills.

  • @joejoeready
    @joejoeready ปีที่แล้ว +1

    my second time watching. excellent video. thanks

  • @Gendo3s2k
    @Gendo3s2k 5 ปีที่แล้ว +21

    Wow. You just spent 20 minutes complaining about people asking you about the swap, but somehow managed to not answer any of the questions that matter.
    How about that Oil pan clearance issue?
    The alternator that bangs up against the frame issue?
    floorboard modifications?

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +6

      And you spent 20 minutes watching it and couldnt figure out that those are specific issues and this is a general video. The stock oil pan and alternator mounts worked for me. Obviously they wont work in every car. Notice how I didnt talk about exhaust either?

    • @standardissue3903
      @standardissue3903 5 ปีที่แล้ว +1

      @@JovaniDanteGriego Those aren't specific issues. Those are common issues with a large number of swaps.

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +1

      @@standardissue3903 If your oil pan doesn't clear you cut it or buy a muscle car pan. If your alternator doesn't fit you buy another bracket. there you go

    • @jordanwalker9309
      @jordanwalker9309 5 ปีที่แล้ว +1

      Not saying this isn't a very good video about info on ls swaps. But but since u went into indepth about different transmissions lol like auto th350 th400 4l60e 4l80e manual nv4500 nv3500 t56 ect. But u didnt mention 350z trans. I've heard it's a good trans to swap and 6spd. It seems pretty popular now. I dont remember the model numbers but its basically a 350z g25 ect trans and has really good gear ratios for ls swaps

    • @huckey2010
      @huckey2010 5 ปีที่แล้ว

      @@JovaniDanteGriego muscle car pan is the worst recommendation. You might as well run a truck pan at that point. F Body or Holley 302-2 are more universal.

  • @raulperez3017
    @raulperez3017 3 ปีที่แล้ว +2

    Yea dont listen to the bs bro.you dida great job...id rather sit an learn something over a short vague video that still has you asking question so now you have to take more time find more videos..duh !!! If your video is too long for someone than they arent really trying to do a swaptheyre just hating on you..2 thumbs up 👍👍 from me thank you

  • @jonamartinez6451
    @jonamartinez6451 5 ปีที่แล้ว +3

    Just got me a 5.3 ... my first swap 😁

  • @madebyamerica81
    @madebyamerica81 ปีที่แล้ว +1

    I’m brand new to the American muscle. Just bought me an 01 Tahoe 5.3 LT. 203k miles, what can, should I do?

  • @JorgeGonzalez-yp6ls
    @JorgeGonzalez-yp6ls 4 ปีที่แล้ว +56

    is more annoying having you brag and repeat about how annoying people get when they ask questions🤦‍♂️and if u dont like answering them then dont do videos!

  • @rafaelmonterm
    @rafaelmonterm 3 ปีที่แล้ว +1

    Ty very much I'm working on my 85 Sierra you just answer all my questions
    Subscribed.

  • @jessielastern3064
    @jessielastern3064 4 ปีที่แล้ว +6

    Ls9 in 2003 540i

  • @LandonRoy-cv9rt
    @LandonRoy-cv9rt 4 ปีที่แล้ว

    Today I finally found and bought a 2009 Silverado reg cab short box 2x4 with 4.8litre, Only has 162,000 Kilometers it! I payed $1200.00 for it because it has a bunch of body damage and break lines are rotted out so the owner just wantrd it out of his yard. I think ive done well with this purchase to begin my LS swap into my '84 Buick Regal Limited once i have the engine installed and running well and tuned ill be installing a Borg Earner S475 or maybe even the cheap ass e-bay GT45. Thank you for the inspiration buddy

  • @33traphouse
    @33traphouse 5 ปีที่แล้ว +10

    Basic & str8 to the point but informative for a beginner who wants to know a few tips ....thumbs up 👍🏿

  • @lawrencecoleman6739
    @lawrencecoleman6739 3 ปีที่แล้ว +1

    I'm glad I came across your channel because I just got a ford ranger given to me from my cousin and I plan to do a ls swap to it

    • @chrisking7295
      @chrisking7295 3 ปีที่แล้ว

      Just got my ranger today im doing the same lol

  • @FaithRisen
    @FaithRisen 3 ปีที่แล้ว +5

    Thanks man! Im an old school guy that has been resistant to the LS swaps. Very Inspiring video

  • @armedtotheteeth1974
    @armedtotheteeth1974 3 ปีที่แล้ว +2

    Very informative video. I apologize for all the ass biscuits that where rude. Thank you for your time and knowledge.

    • @JovaniDanteGriego
      @JovaniDanteGriego  3 ปีที่แล้ว

      I dont worry about them, thanks for the comment!

  • @amrikjaswal76
    @amrikjaswal76 5 ปีที่แล้ว +5

    Hey Jovani,
    Thanks for the vids on the LS motors....just a quick question for you. I just picked up a LS1 out of a 2002 Corvette with 125k, it is completely.stock...was wondering what quick upgrades you would do if you were working with this motor? I would like to keep it naturally aspirated. I was thinking a hot cam for sure, but just dont know which one would give me the most power Increase. Was also thinking of changing the rockers and springs. What do you suggest?

    • @pikkons
      @pikkons 5 ปีที่แล้ว +1

      Cheap extra power without sacrificing the integrity if this came out of a base Corvette would be a ZO6 cam, cold air intake, and long tube headers. That would take it from the 350 HP to over 400 and you won't have to worry about changing the springs and stuff. And with it being an O2, the intake manifold and everything is exact same between a base and a ZO6 so that doesn't need to be changed.

    • @amrikjaswal76
      @amrikjaswal76 4 ปีที่แล้ว +2

      @@pikkons thank you....I got installed a summit stage 2 cam, dual valve springs, 1 3/4 long tube headers and a cold air intake.....so hope to get above 400 hp.....keeping my built th400 behind it as well.

  • @Therealchristian_scott
    @Therealchristian_scott 4 ปีที่แล้ว

    Thought the comments were playing, hands down one of the hardest videos to watch on TH-cam

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      Thanks for the watch time though

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      Check out my other videos and consider subscribing

    • @Therealchristian_scott
      @Therealchristian_scott 4 ปีที่แล้ว

      Jovani Dante Griego Watched less than a minute and no thank you also find a shirt your size pussy

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      th-cam.com/video/DucuEkh9yJE/w-d-xo.html

  • @joshuarodriguez8142
    @joshuarodriguez8142 5 ปีที่แล้ว +6

    I have a 99 LS1 with a nv3500 5 speed transmission the flywheel and clutch is off a 4.8 99 Silverado eBay sales the cheapest standard wiring kits as long as you have a computer to flash I'm keep mind injected.

  • @michaelyoho4848
    @michaelyoho4848 3 ปีที่แล้ว +2

    Thank you for all this helpful knowledge. You ROCK

  • @Frosthernandez
    @Frosthernandez 5 ปีที่แล้ว +10

    Feel like I can do it

  • @kgkg6649
    @kgkg6649 3 ปีที่แล้ว +1

    Great video!

  • @geobltrn8423
    @geobltrn8423 5 ปีที่แล้ว +15

    “Pacific car” 🤦🏻‍♂️😂

  • @kcsnow9447
    @kcsnow9447 2 ปีที่แล้ว +1

    Yeah, but can I put an LS into my Porsche 911/996, which needs an engine swap because I was stupid and blew out my IMS bearing (and thus the whole case)? [Naw, just kiddin'--I've only just blown some sort of coolant pipe on the 911 and not the engine...yet] This is very helpful, because I need something to replace the godawful AMC V8 on a '89 Grand Wagoneer. Overview videos like this one give the big picture. Which I, at least, need to see.

  • @TwistedMetalsOfTexas
    @TwistedMetalsOfTexas 5 ปีที่แล้ว +4

    Thank you very informative you just got a new sub

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว

      Thanks man appreciate it!

    • @drewt3210
      @drewt3210 5 ปีที่แล้ว

      Totally agree, I hit the SUB button too!

  • @jaimecortes1108
    @jaimecortes1108 4 ปีที่แล้ว +2

    Great video and explanation by far the best one I’ve seen. I have a donor suburban 5.3 swapping into a 79 el Camino not my first rodeo on swapping motors but it will definitely be my first ls swap so excited.

  • @youngestson6537
    @youngestson6537 5 ปีที่แล้ว +7

    Pretty good video. 💯✌🏾

  • @Deadnoodpro
    @Deadnoodpro 3 ปีที่แล้ว +1

    I have done ✅ 4 ls swaps already all on obs but I have a 2008 Chrysler Town and country that the motor just gave out don't really have the money to do anything to It right now but thinking of ls swaping it further down the road

  • @colejohnson3705
    @colejohnson3705 5 ปีที่แล้ว +3

    A 4L80e does not just swap in later!!!!! Some of us have to cut the trans tunnel out and build a new one to fit that huge transmission! Then rebuild the interior. So building a strong 4L60e is MUCH cheaper in the long run, right! Or do you know someone who does interiors really cheap. Like a case of beer cheap. Other than that , you did a good job!

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +3

      It depends on the power your making. A 4l60e will not be reliable no matter how much you build it past 600hp so in the long run making the 4l80 fit might be worth it

    • @colejohnson3705
      @colejohnson3705 5 ปีที่แล้ว +1

      True enough. I already enlarged the tunnel to fit the 4l60 in my mighty max. There is not any room.. Maybe with the new chassis I built the 4L80 will fit? Right now I am only pushing 450hp, so I believe I am safe for a while. Have a great day and Thanks for the reply!

    • @purplepanda7075
      @purplepanda7075 5 ปีที่แล้ว +1

      Had to be in the same era also. Not any old 80 will work. I went through 3 4l60es lol

  • @marcodeleon426
    @marcodeleon426 2 ปีที่แล้ว +1

    thanks for sharing your knowledge, im trying to learn as much as possible to do a ls swap

  • @hash46176
    @hash46176 4 ปีที่แล้ว +3

    Im putting a6.0 ls and 4l60e first gen in 1989 gmc k2500

  • @daviddenman7479
    @daviddenman7479 3 ปีที่แล้ว +2

    Ar5 from a Colorado is a stout 5 speed transmission that’s proven. $419 adapter with a 4l60e bell housing and a T56 clutch. You can get all that less than a grand but still way cheaper than a t56.

  • @DjCBlaq
    @DjCBlaq 5 ปีที่แล้ว +3

    Great content.

  • @ActiveDadsRule
    @ActiveDadsRule 4 ปีที่แล้ว +2

    New subscriber: just purchases a 1985 GMC SWB truck... Doing research on what to look for and found your video. I will have questions as I plan the build, thanks

  • @crimsonhawk4912
    @crimsonhawk4912 5 ปีที่แล้ว +38

    How do I swap am ls into my lazy ass wife

    • @demarkisdinkins2737
      @demarkisdinkins2737 4 ปีที่แล้ว

      Crimson Hawk 💀💀💀same

    • @Dragon228833
      @Dragon228833 4 ปีที่แล้ว +2

      Stash your liquid assets and file for divorce💀💀💀

    • @albinshibu8246
      @albinshibu8246 4 ปีที่แล้ว +1

      No results found😭😂😂

  • @dwayneemmers2236
    @dwayneemmers2236 2 ปีที่แล้ว

    Good Video Thanks

  • @OLSKOOLKINGZ
    @OLSKOOLKINGZ 4 ปีที่แล้ว +5

    About to ls swap a dodge magnum

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว

      Nice! Good luck! Let me know how it goes

    • @SrtLv4x
      @SrtLv4x 4 ปีที่แล้ว +1

      Rule number 1 never ls swap any mopar only use hemis

    • @chrishansen7004
      @chrishansen7004 4 ปีที่แล้ว +1

      Why not put a hemi? That’s molestation

  • @Rudedogg119
    @Rudedogg119 3 ปีที่แล้ว +2

    Thanks for the info it has been very helpful, will be putting it to use soon 👌🏾

  • @cleancut251
    @cleancut251 4 ปีที่แล้ว +6

    I like your subscription I'm a mechanic and yes you are very straight forward I like it because people do ask off the wall questions 💯💯

  • @Troublemaker0npc
    @Troublemaker0npc 2 ปีที่แล้ว +1

    Question to creator, I have a 2012 gmc terrain my motor is fucked I want to put a ls in the car what would be my best choice, I have been told to get a 350 small block ls

    • @JovaniDanteGriego
      @JovaniDanteGriego  2 ปีที่แล้ว

      Hi a 350 small block is not an LS. There is a 5.7 LS1 (350cu in.)
      However either way you really don't want to swap your terrain. It's a front wheel drive car with not a lot of room in the engine bay. Your asking for alot of modifications for not alot of benefit

  • @sadboycali
    @sadboycali 5 ปีที่แล้ว +5

    I learned so much! Thank you so much!

  • @umakemerandy3669
    @umakemerandy3669 หลายเดือนก่อน +1

    Just watch them 99-01 LQ4s have the "long crank" which CAN work with certain trans but can cause complications.

  • @dakel7
    @dakel7 5 ปีที่แล้ว +3

    What about driveshaft, and diffs?

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +1

      Thats all vehichle specific. If yours wont hold I mean theres the ford 8.8 or gm axles

  • @eddieadame5464
    @eddieadame5464 2 ปีที่แล้ว +1

    I have a 88 coupe deville with a 4.5 in it but I wanna go bigger what would you suggest?

  • @colinhenshaw8946
    @colinhenshaw8946 5 ปีที่แล้ว +3

    I’m working on pulling out a 5.3 out a Tahoe, gonna be swapping it in my 88’ Chevy Silverado. Gonna be my first ls swap, so it’s gonna be a learning curve.

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว

      Just try to have all your parts together before you start. Good luck!

  • @Blando7887
    @Blando7887 3 ปีที่แล้ว +1

    I have an 02 Silverdildo, they 4.slow is toast, I’m gathering knowledge here

  • @ReyJOnliine
    @ReyJOnliine 4 ปีที่แล้ว +13

    But bro, how do I make 600rwhp???!!! Lol jk good stuff bro, makes me feel good about doing a swap.

  • @ebbonemint
    @ebbonemint 5 ปีที่แล้ว +8

    New to this channel but based on the repurposed box of diapers, and toddler height chalk graffiti... Can assume you’re a dad lmaoo
    #Dadlife

  • @stogie1027
    @stogie1027 4 ปีที่แล้ว +2

    Thank you. You just convince me to buy a turn key pallet lt1 engine. I am to unorganized to accomplish this any other way

    • @JovaniDanteGriego
      @JovaniDanteGriego  4 ปีที่แล้ว +1

      Lt1 is not an LS just so you know. It's a sbc

  • @Project_Bronze_114
    @Project_Bronze_114 5 ปีที่แล้ว +9

    Very good info, thanks for posting! My ‘95 Trooper has developed what I believe to be a rod knock (but I’m probably wrong), and I’ve settled on the idea of doing an engine swap vs buying a new vehicle, as that will be the least expensive option in the immediate timeline (hopefully!). Currently in the process of figuring out which LS engine, tranny and transfer case I’m going to try and find. Also trying to decide if I’m going to do a solid axle swap at the same time...

  • @mikef-gi2dg
    @mikef-gi2dg 4 ปีที่แล้ว

    I have done s-truck and g-body swaps, looking to ls one( first ls) of my Monza's, This video will make good reference swap 101 material. I am a big one for doing research on subject before starting a swap, learned that the hard way long ago. I will subscribe and follow along. I am here for information, don't have time to gripe about style points in the video, cause I have said the same thing about helping others on swaps like s-trucks, gets old after a while. Don't mind helping some one who will put the research time in, knowledge is power. Keep it up.

  • @Incaensio
    @Incaensio 5 ปีที่แล้ว +61

    3:00

  • @luisvaltierra2162
    @luisvaltierra2162 ปีที่แล้ว +1

    What about the fuel pump and gas tank for the car. Doubt the oem fuel system from the OG car won't work if you just only do this. While using a whole new harness

    • @JovaniDanteGriego
      @JovaniDanteGriego  ปีที่แล้ว

      I have tons of in depth info on all of this on my channel

  • @kriswituhk
    @kriswituhk 3 ปีที่แล้ว +3

    For some odd reason my main goal is to swap an ls into my '02 saturn sl1. Once I have the money, of course. So in the meantime I do my research. Might even document it on yt when it comes time to do it!

  • @ls2gudchevs752
    @ls2gudchevs752 2 ปีที่แล้ว +1

    Thnks my friend for this info, I planning to work on my 89 chevy c2500 thnks for this upload stay safe🙏

  • @joseneryavila1796
    @joseneryavila1796 4 ปีที่แล้ว +16

    I can’t take you serious with that dirty garage and your Deadpool shirt

    • @bryanroupe8646
      @bryanroupe8646 4 ปีที่แล้ว +2

      My garage is always dirty and I can bet you don't do have what I do. If you were always in yours it would be dirty too.

  • @davidmilovanovich9415
    @davidmilovanovich9415 4 ปีที่แล้ว +2

    Hi very good explanation
    On LS engine swap
    2019 wow now 2020

  • @oscarmanzano8264
    @oscarmanzano8264 5 ปีที่แล้ว +6

    6.0 into a 76 Nova

    • @JovaniDanteGriego
      @JovaniDanteGriego  5 ปีที่แล้ว +1

      You doing it?

    • @oscarmanzano8264
      @oscarmanzano8264 5 ปีที่แล้ว +1

      Jovani Dante Griego heck yeah, I got the car I just need the engine, I was thinking about a Ls6

    • @natedime5032
      @natedime5032 5 ปีที่แล้ว

      6.0 into a 85 cutless

  • @papatee3024
    @papatee3024 2 หลายเดือนก่อน

    Just bought my 83 cadillac coupe and it has the garbage ht4100 plan on getting an swapping out the engine, any suggestions/advice