Been using xlim pro and this sq pro for more than 8 months. I feel your review is honest and good 👍. Best pod currently is sq pro and xlim pro. I have tried different devices but this is best. One con i felt in sq pro is that sometimes it shows no pod as the flavour gets into the chip but that only happened 2 times. Still happy with the purchase. Bro can you make a video on coils and flavours and the things like mtl dtl rdl etc. Thanks❤
Hey your videos are super informative but I have a question about tail lights on a 2012 volvo xc90. I've tried 3 times to do the curved part of the light and keep running into the same problem. The edges keep pulling back at the same part. They are a difficult light to tint. I'm using vivid air release. Would u have any tips on that specific light by chance
Your job turned out great! I wrapped my interior with VViViD XPO Red 3D Carbon Fiber a while back. Even with my extremely dark window tint and not being in direct sunlight it got sun bleached in months and started to look an orange pink. Did not hold up well to sun exposure at all. In your experience does this wrap hold up better to UV over time? Thanks!
Hi i am just removing my avery dennison wrap. Its leaving alot of residue and white parts of the wrap. How would i remove that safely withput damaging paint?
Hey Christian (or anyone with high skill level) Been watching your vids for about 1yr and I decided to give the vinyl wrap thing a try. Did my headlights and corner lights and they came out pretty great for my first try. Taillights... Not so much 😔. It's driving me crazy that I can't figure it out. I have an 08 Mercury Grand Marquis and the tail lights I like a big warped triangle ⚠️. I tried wrapping left to right and right to left and I STILL kept getting creases at the top that would NOT smooth out and of course I ran out of wrap to try from top to bottom/bottom to top. Any ideas or tips? Im using Vivid HEX+ dark smoke high gloss air tint. Thanks in advance.
@CKWraps Thank you. Just wanted to make sure the hood deflector 3M foam adhesive wouldn't make the film lift or the hood deflector start moving back over time. I did forget to mention, I'm in St George Utah where it gets to 116° Fahrenheit & we're closer to the equator compared to Canada, so UV & the sun fries things. Hood deflector was halfway ripped off from a auto car wash & removing the rest of it just broke it a bunch of pieces. Thanks for all the videos, I appreciate it. Tried wrapping a 2013 Ford F150 mirror cap on a towing mirrors & in one piece that just doesn’t work witj VViViD ColorFusion ppf stealth Gunmetal Grey. Sincerely, Matthew
how would you compare this to tinybot 6d as far as looking like real CF? i wrapped the center console of my model 3 in tinybot, and while it definitely looks nicer than the piano black oem, im kinda starting to hate how it looks obviously not real and considering a $150 real cf overlay.
Nothing will beat the real thing. Some people would be happy with spending a bit of time and a lot less money on vinyl. While others will want it to be perfect and will spend the extra money on the real thing. Vvivid's is darker than Tinybot because Vvivid's is a sealed gloss Carbon Fiber which is suitable for exterior use while Tinybot's isn't.
I like those „more professional“ like videos with someone behind the camera and everything nicely cut together.
Keep it up man 🤙🏻
After watching many many videos, I'm attempting to wrap my Jeep once my film comes in.
Can't wait!
Wow! Love it.
You do such a great job teaching how to do this stuff. I'm just getting started and really appreciate your tips.
Looks great!
Nice as always 💪
Great job, Christian
i have learned SO much from your videos!
Awesome.
Magic hands 🎉🙌
You made that look so easy lol, I failed miserably trying that on one of our Jeeps lol
Been using xlim pro and this sq pro for more than 8 months. I feel your review is honest and good 👍. Best pod currently is sq pro and xlim pro. I have tried different devices but this is best. One con i felt in sq pro is that sometimes it shows no pod as the flavour gets into the chip but that only happened 2 times. Still happy with the purchase. Bro can you make a video on coils and flavours and the things like mtl dtl rdl etc. Thanks❤
Wish I had the skill or could afford any wrap on my car😂. Great job and instructional
Thank you so much❤
Hey Christian, do you have more Colorfusion videos coming out? I've been dying to see the Cosmic Blue and gloss colors from you, thanks!
Makes it look so routine lol!!!
Hey your videos are super informative but I have a question about tail lights on a 2012 volvo xc90. I've tried 3 times to do the curved part of the light and keep running into the same problem. The edges keep pulling back at the same part. They are a difficult light to tint. I'm using vivid air release. Would u have any tips on that specific light by chance
Your job turned out great! I wrapped my interior with VViViD XPO Red 3D Carbon Fiber a while back. Even with my extremely dark window tint and not being in direct sunlight it got sun bleached in months and started to look an orange pink. Did not hold up well to sun exposure at all. In your experience does this wrap hold up better to UV over time? Thanks!
Hi i am just removing my avery dennison wrap. Its leaving alot of residue and white parts of the wrap. How would i remove that safely withput damaging paint?
Hey Christian (or anyone with high skill level) Been watching your vids for about 1yr and I decided to give the vinyl wrap thing a try. Did my headlights and corner lights and they came out pretty great for my first try. Taillights... Not so much 😔. It's driving me crazy that I can't figure it out. I have an 08 Mercury Grand Marquis and the tail lights I like a big warped triangle ⚠️. I tried wrapping left to right and right to left and I STILL kept getting creases at the top that would NOT smooth out and of course I ran out of wrap to try from top to bottom/bottom to top. Any ideas or tips? Im using Vivid HEX+ dark smoke high gloss air tint. Thanks in advance.
can use ppf carbon fiber instead?
Would be nice to see more than 2 seconds of after shots
Can you install a Hood Deflector onto a vinyl wrapped hood?
Yes you can, we do duck bill spoilers all of the time.
@CKWraps Thank you. Just wanted to make sure the hood deflector 3M foam adhesive wouldn't make the film lift or the hood deflector start moving back over time.
I did forget to mention, I'm in St George Utah where it gets to 116° Fahrenheit & we're closer to the equator compared to Canada, so UV & the sun fries things.
Hood deflector was halfway ripped off from a auto car wash & removing the rest of it just broke it a bunch of pieces.
Thanks for all the videos, I appreciate it.
Tried wrapping a 2013 Ford F150 mirror cap on a towing mirrors & in one piece that just doesn’t work witj VViViD ColorFusion ppf stealth Gunmetal Grey.
Sincerely,
Matthew
how would you compare this to tinybot 6d as far as looking like real CF? i wrapped the center console of my model 3 in tinybot, and while it definitely looks nicer than the piano black oem, im kinda starting to hate how it looks obviously not real and considering a $150 real cf overlay.
Nothing will beat the real thing. Some people would be happy with spending a bit of time and a lot less money on vinyl. While others will want it to be perfect and will spend the extra money on the real thing. Vvivid's is darker than Tinybot because Vvivid's is a sealed gloss Carbon Fiber which is suitable for exterior use while Tinybot's isn't.
Would anybody here inlay on the w204 c250 Mercedes rear bumper? Theres so many different curves plz help!
Cheers