The larger-size Zippo handwarmers are a very old design. I'm 80, and we had them when we were kids. They can be extinguished simply by removing and setting aside the catalytic burners, but pliers or some other hand-protection is needed to do that without pain. Also, we discovered that by carrying them in a belted-wrap, thin-pouch-pocket of some kind to protect the skin from excessive heat, carrying one or two of them positioned over one or both of the kidney areas in the back, they served to add considerable warmth to the whole body, since our blood flows through our kidneys as well. It works surprisingly well to provide an overall feeling of warm comfort. However the fingers and toes are not much warmed that way. The petroleum-based, smelly, Zippo-fluid is also a bit of a bummer.
My father used zippo warmers and I remember them from 60 years ago. Smokers carried zippo lighters and fuel already so no overhead carrying a handwarmer.
I remove the catalytic burner by using the cap to pin it down to a surface, usually on top of the little bag, and then just pull the body away from it. Then I just scoop the burner into the cap and put that back on the body. There's enough space inside the cap for the burner to remain separate from the body.
The Zippo hand warmer is a good choice for what it's intended for, but if want the best hand warmer hands down you must wrap your hands on a Peacock handwarmer made by Hankin. Hankin is a Japanese company that invented the hand warmer in 1923. Zippo came out with their version in 1953. The Peacock hand warmer runs for an incredible 24 hours, broken up into 6-hour intervals and runs on lighter fluid. It has a better filling system then Zippo and does not suffer from cold shock. I paid $15 for mine and could not be happier with my purchase. The Hankin hand warmer has a better and softer velour bag and allows you to wear the hand warmer around your neck underneath your jacket or sweater. A prized commodity for sure as the price has doubled in the last year and may be hard to find. Good video as always.
I really like how everything you promote has a good reason behind it. You never promote junk. This tells me that you don't always get the best affiliate payout (if any at all). I'm a new subscriber but I have yet to see anyone with your quality of work. I think the extras such as the décor you switch out in the back also give a really nice touch and feel to your production. Best of all, you seem to have fun and really enjoy what you do. Many thanks from a traveling globetrotter (between the US, Japan, and Switzerland).
Hands down the best EDC gear reviewer on TH-cam. I subscribe to more than a few channels but drop everything when Jon puts something out. Keep up the great work mate.😊
Jon I don’t doubt that it is hard work but it shows. You’re not just flogging any old gadget but I don’t think I’m alone when it comes to appreciating the thought and practical advice of every item you review, THAT is why I keep coming back. Plus you’re just a laugh at times! 😊
I wasn't even looking for EDC stuff today, but Jon dropped another video so that made my decision. Another great video, keep it up as always, thanks for your no-nonsense content!
To turn the Zippo warmer off, put it in a Ziploc bag and close the seal. When the oxygen inside is used up, the combustion/heater process stops. You also now have a waterproof storage container to store the hand warmer until it is needed again. The fuel will evaporate in a week or two just like normal zippos so this is more of a short term solution as long term you will still need to carry zippo fuel.
I've got a couple of Zippo petrol based pocket warmers. They're good but fiddly to use and only practical if you're outside in the cold for several hours as they remain constantly on. I've started using a rechargeable battery hand warmer instead. It can be switched on and off when you need it and has different temperature settings so it's much more practical. It can also double up as a powerbank.
11:42 I've found that if you want to "turn off" the Zippo hand warmer, you can grab a pair of pliers and remove that little catalytic converter which will stop the heating process. It's not ideal as I'm sure not everyone carries pliers with them all the time like I do, but it's an option for when you get home I guess. Just make sure to find a heat resistant place to place that converter as it cools down, as it's ridiculously hot.
hand warmers...what could go wrong?..... as a teenager i delivered the newspaper, had handwarmers similar to these....lets just say i was using a stool as a table and i set the top on fire....no worries or damage to anything, i quickly put it while muttering....fire fire fire with quiet urgency.
I just started looking for EDC items for my job as a truck (lorry for you) driver to carry on my person. Been watching a lot of your videos and I noticed that Amazon tends to bundle the items you recommend as "frequently bought together", so you're having an noticeable impact on the EDC Sphere, well deserved too.
You can put the hand warmer in a zip-loc bag to cut off oxygen, and the "flame" will go out. You can also store them with lighter fluid in it this way, and it won't evaporate as quick.
Tremendous video, the hand warmer looks good for walking but as a bricklayer for 40 years I've never found anything to keep my hands warm while working. Only thing I haven't mastered yet .
Bought a rechargeable hand warmer and it’s perfect. Can chg cell off of it too. USB-C too. Just received the metal version of those keychains and I love it!
I can see a contractor using the magnets from the Big Idea Design Ti Pry Bar to hold down blueprints on the hood of his pickup truck , or to hold down a map etc. That makes the Big Idea Design Ti Pry Bar practical instead of just a fidget prybar.
I bought a knife from Amazon last year that looks identical to the James Brand knife. The Whitby Sprint looks exactly the same but at a much cheaper price. I would say say the Whitby knife was a nice small knife and the quality was good for £14.95!
@@JonGadget I still have the Space Pen I bought from there more than 20 years ago. I fear the other purchases didn't quite stand the same test of time :)
Hello, new visitor here. Can you let us know about your yellow lights in background? Where you buy them? Are they led? Looks cool! Thanks for all the info
Dear Jon, I did it again.... But first: I really enjoyed your 2023 videos, and concerning your EDC pouch update, that also included some interesting ideas (have a prepaid credit card with you, simple and smart!) I got aware, how much brain work you are investing: from thinking about situations, you want to be prepared for to how you want to face them, i. e. finding the most appropriate items, and finally making them fit into the pouch. Respect! This time I couldn't ignore your recommendation on the JB Elko - I have just ordered it. ;-) Looking forward to more interesting stuff, wishing you all the best, cheers Frank
Worth researching James Brand. I think the steels they use etc are not usually very good. For some this isn’t an issue but for the prices they’re charging you’re paying a premium price for less than premium steel.
@@JonGadget Zippo hand warmers suffer from cold shock which stops the catalytic process. But still a decent hand warmer. I prefer the Peacock hand warmer no cold shock issues.
I wonder if the magnets in the pry bar aren't purely cosmetic, but instead they can be used to add leverage to a pry, like putting a 2x4 under a hammer when you remove a nail?
I have the Bit Bar 1 and BID could have designed better or there wouldn’t be a V2, it’s in my kit but def not worth the money. I’d recommend Fenix all day long, I have three of their lights (LD30, TK35UE❤️ and the HM65R-T. Boker or SpiderCo for my EDC knives, cheap cheerful and reliable. The electric Zippo hand warmers work great but I just don’t use them, I only wanted them for stealth camping but they’re just too heavy. I got a lovely double ended Snap-On pry bar from work, I’d never replace that.
Regarding your assertion @ 4:30 that TIR lights somehow can not be good throwers I'd like to call your attention to the Sofirn IF22A and IF19 with ranges of 697m and 461m respectively.
It was more about the compact size of the lens (width and depth) limiting the range - The Sofirn is optimised for range and does not have a compact head.
Hello Jon- this is off topic for this video but would you consider doing a carry video for suitcases (hard side or soft) for the overhead bin on a plane? And for a larger suitcase for a long international trip? Much appreciated! Great stuff you preview and my credit card goes for many of your recommendations. Best regards!
I like the Bit Bar II but at the price with the currency conversion from USD to AUD I think I will keep to using my Tactica Hex bit tool kit in all honesty as it's just the smart more cost effective move, I like the james brand Elko, i think it's a good piece of kit that might be a worthy investment. I realised the Wave+ doesn't have a lanyard hole in the aussie version lol
I see you're sporting a new watch, not sure if you collect them or not, but have you thought about doing any watch based videos? Great collection as always, take care.
Yep. Diesel Jeans cost €150 and ASOS Jeans cost €40 again same materials. We all know why. A bit of additional quality, design and a brand you can buy into if you want. Good to have the choice I would say.
You should check out the acebeam e70 mini... Its the best edc flashlight on the market: Usbc charging, tail switch, compact, 2k lumens and removable battery.
Impressive the Fenix TK20R, I'm gonna compare it to one of the Olights, been thinking about picking-up an Olight but gonna def check out Fenix before I do. I don't necessarily need the most compact flashlight, the size of the Fenix looks compact enough for me anyway.
Jon: Do you have a recommendation for a flashlight to be used at home where portability isn't a concern? I live in the country and would need it for taking the garbage out at night, walking around the property... I think it would need flood and spot, high lumens, and a long throw. Thanks!
Take one of the head light so you can have the hands free IMO. I use a cheap one for the same reason and they are much better than regular to take out the trash when dark outside
Really enjoy your reviews. I purchased the Victorinox Complete and want to switch out the scales to titanium. Would you please recommend a site you trust for good fitting. Thank you!
I feel sorry for you guys in England and the U.K. You can only have a blade of a certain length. Yesterday I carried my Bowie Knife around all day and nobody cared. Great channel BTW 👍
I have a Victorinox question I’m hoping someone hear can answer for me. I have a huntsman and I’m wondering if I screwed up my reamer. I very foolishly, late at night and half awake, opened tools on both sides to send my friend a picture. The reamer now has some significant movement. Not side to side play but it goes towards closing the closing position very easily. I can’t remember if it was like that before, does anyone know if this is normal or if I did some damage to it:(? Thanks in advance. P.s: I love this channel
depends if you think you will use the in-body lights of the A8 - if so I would go for that (it's my EDC) if not A3 Pro is fine but make sure you go for Gen4 with USB-C
Hey Jon, found an item you may want to have a squiz at. Check out item ADP05 from Makita. Turns your work tool batteries into a power bank for your electronic devices. Finding it very useful at moment in adverse weather we are having in NZ. Cheers Stu
That side button style on the Fenix gets bumped way too easily when stowed away in pouch or pocket. I’ll never buy another side button that isn’t recessed.
Can't say I like the fidget pry bar, it just feels a little bit too much like edc collector tat. The bit bar on the other had does look like a decent design, if a little pricey.
historically speaking 21700 come in 4000mAh. never have i ever seen a 5000mAh cell, and i worked selling vapes (where the absolute best batteries are a must) and i would have known of 5k batteries. even if by some miracle they crammed more in those cells, they would not last more than 6 months with constant use due to overheating. realistically, samsung cells with 4000 mAh are your best bet for longevity and performance. to whoever doesn't agree with me, fight me.😂
I don't get equating pounds to dollars in your price info. There's a 25% surcharge for the same amount in dollars. It's not nothing. I think you should quote both prices if you want but can't say will cost 100 pounds or dollars.
No way I'm paying $120 for the Big Idea Design bit bar. That's a total ripoff. I found a Steelman version for $26! No go on the Zippo hand warmer - too old school: messy & smelly. I think you're better off getting one of those rechargable electric hand warmers. Ti Bar for $80 - no; there are cheaper and better pry bars on the market.
hand warmer turn OFF, take the element off with glove or pliers, set on something not meltable and the non-Zippo version my father had never needed a new element, today's cheap china crap... retractable tether, I believe Gerber Knives makes something like it
I spent some time at the North Pole some time back I would have loved to carry the hand warmers everyday when I was there - I know people who carry a torch everyday for work too
Hello John, I do believe your channel was spammed. Indeed I received a message asking me to connect on Telegram which does sound odd to me. Still like your channel though :)
Am I the only person who would like to do away with the strobe function? I recognize those who have tactical delusions, but really!!! What an irritation to have to cycle past that thing! The Fenix looks quite good beyond that. I would rather have a moonlight mode than strobe. But I can give that up for the long life at 50 lumens. So why not just skip the strobe, too?
The larger-size Zippo handwarmers are a very old design. I'm 80, and we had them when we were kids. They can be extinguished simply by removing and setting aside the catalytic burners, but pliers or some other hand-protection is needed to do that without pain. Also, we discovered that by carrying them in a belted-wrap, thin-pouch-pocket of some kind to protect the skin from excessive heat, carrying one or two of them positioned over one or both of the kidney areas in the back, they served to add considerable warmth to the whole body, since our blood flows through our kidneys as well. It works surprisingly well to provide an overall feeling of warm comfort. However the fingers and toes are not much warmed that way. The petroleum-based, smelly, Zippo-fluid is also a bit of a bummer.
My father used zippo warmers and I remember them from 60 years ago. Smokers carried zippo lighters and fuel already so no overhead carrying a handwarmer.
Interesting.
Sucks when they get turned upside down though because the fuel soaks the catalyst on the top and puts it out.
I remove the catalytic burner by using the cap to pin it down to a surface, usually on top of the little bag, and then just pull the body away from it. Then I just scoop the burner into the cap and put that back on the body. There's enough space inside the cap for the burner to remain separate from the body.
All great feedback - thank you
The Zippo hand warmer is a good choice for what it's intended for, but if want the best hand warmer hands down you must wrap your hands on a Peacock handwarmer made by Hankin. Hankin is a Japanese company that invented the hand warmer in 1923. Zippo came out with their version in 1953. The Peacock hand warmer runs for an incredible 24 hours, broken up into 6-hour intervals and runs on lighter fluid. It has a better filling system then Zippo and does not suffer from cold shock. I paid $15 for mine and could not be happier with my purchase. The Hankin hand warmer has a better and softer velour bag and allows you to wear the hand warmer around your neck underneath your jacket or sweater. A prized commodity for sure as the price has doubled in the last year and may be hard to find. Good video as always.
Seems the same on first look - but will check it out - thanks for sharing.
I really like how everything you promote has a good reason behind it. You never promote junk. This tells me that you don't always get the best affiliate payout (if any at all). I'm a new subscriber but I have yet to see anyone with your quality of work. I think the extras such as the décor you switch out in the back also give a really nice touch and feel to your production. Best of all, you seem to have fun and really enjoy what you do. Many thanks from a traveling globetrotter (between the US, Japan, and Switzerland).
Thanks for the really kind feedback. You are right, I do enjoy finding new gear - I have done for many years!
Hands down the best EDC gear reviewer on TH-cam. I subscribe to more than a few channels but drop everything when Jon puts something out. Keep up the great work mate.😊
Thanks Phil. Really kind of you to say, makes all the hard work feel worthwhile 👍
Jon I don’t doubt that it is hard work but it shows. You’re not just flogging any old gadget but I don’t think I’m alone when it comes to appreciating the thought and practical advice of every item you review, THAT is why I keep coming back. Plus you’re just a laugh at times! 😊
I wasn't even looking for EDC stuff today, but Jon dropped another video so that made my decision. Another great video, keep it up as always, thanks for your no-nonsense content!
Thank you 😊
To turn the Zippo warmer off, put it in a Ziploc bag and close the seal. When the oxygen inside is used up, the combustion/heater process stops. You also now have a waterproof storage container to store the hand warmer until it is needed again. The fuel will evaporate in a week or two just like normal zippos so this is more of a short term solution as long term you will still need to carry zippo fuel.
Thanks for the info
I've got a couple of Zippo petrol based pocket warmers. They're good but fiddly to use and only practical if you're outside in the cold for several hours as they remain constantly on.
I've started using a rechargeable battery hand warmer instead. It can be switched on and off when you need it and has different temperature settings so it's much more practical. It can also double up as a powerbank.
11:42 I've found that if you want to "turn off" the Zippo hand warmer, you can grab a pair of pliers and remove that little catalytic converter which will stop the heating process. It's not ideal as I'm sure not everyone carries pliers with them all the time like I do, but it's an option for when you get home I guess. Just make sure to find a heat resistant place to place that converter as it cools down, as it's ridiculously hot.
The bit bar in conjunction with the Leatherman ratcheting bit driver is an stoppable combination.
11:19 It may not get hotter but a larger body means more thermal mass so it should retain that heat more effectively.
OMG this is the perfekt channel for me. 👍 Where have you been the last 30 years of my life 😊
hand warmers...what could go wrong?..... as a teenager i delivered the newspaper, had handwarmers similar to these....lets just say i was using a stool as a table and i set the top on fire....no worries or damage to anything, i quickly put it while muttering....fire fire fire with quiet urgency.
good to know!
I just started looking for EDC items for my job as a truck (lorry for you) driver to carry on my person. Been watching a lot of your videos and I noticed that Amazon tends to bundle the items you recommend as "frequently bought together", so you're having an noticeable impact on the EDC Sphere, well deserved too.
Hi. That's really interesting to know - I wasn't aware of that! Thanks for the kind words too.
I will often see in one of the top reviews “I bought this because of Jon Gadgets TH-cam channel”
Thanks Jon. Been watching you for a while. This is a very good review. You bring many offers to your show. I always enjoy your displays.
Excellent, Jon. Like a great cigar after dinner.
Thanks, I like the sound of that
You can put the hand warmer in a zip-loc bag to cut off oxygen, and the "flame" will go out. You can also store them with lighter fluid in it this way, and it won't evaporate as quick.
thanks for that 👍
Always a joy, keep it up.
Thanks Dennis
Tremendous video, the hand warmer looks good for walking but as a bricklayer for 40 years I've never found anything to keep my hands warm while working. Only thing I haven't mastered yet .
Glad you enjoyed it
Enjoyed this video, and I'm just working my way through your previous videos
Great to hear 👍 thank you
I use those MN badge holders! Funny to see them here. They're very good.
Bought a rechargeable hand warmer and it’s perfect. Can chg cell off of it too. USB-C too. Just received the metal version of those keychains and I love it!
thanks for kind comment
Interesting, high quality, useful items! Thank you for the excellent presentation 😊
Thank you
I can see a contractor using the magnets from the Big Idea Design Ti Pry Bar to hold down blueprints on the hood of his pickup truck , or to hold down a map etc. That makes the Big Idea Design Ti Pry Bar practical instead of just a fidget prybar.
almost
I bought a knife from Amazon last year that looks identical to the James Brand knife. The Whitby Sprint looks exactly the same but at a much cheaper price. I would say say the Whitby knife was a nice small knife and the quality was good for £14.95!
Happy days Jon, lots of love to you mate
I agree - I would prefer direct access to turbo instead on this one
Freezing in the UK, eh? Here in Bemidji, Minnesota (US) it is a brisk -21 F or -29.4 C.....
Thanks for the great gear reviews and awesome content!
Yes, that is cold!!! Thanks for nice comment.
The bit bar 2 seems like a good idea until you realise for the price you can get a leather an wave and bit kit
true
I love the James Brand stuff, I have a keyhook that I use everyday but it is ridiculously expensive!
I thought those fidget cubes might be mini fulcrums for more lift while prying.
nice idea
I think the flathead/bottle opener on a victorinox (tinker) is really the best pry bar for every day cary...
I like it too
I wish your stores were still around. Heaven.
Thanks Andy - they were good in the day 😊
Used to love the Gadget Shop. Didn't realise the connection!
It certainly made its mark in the day - thanks for kind comment
@@JonGadget I still have the Space Pen I bought from there more than 20 years ago. I fear the other purchases didn't quite stand the same test of time :)
Hello, new visitor here. Can you let us know about your yellow lights in background? Where you buy them? Are they led? Looks cool! Thanks for all the info
You’ve done it to me again Jon. Every time I watch one of your videos I end up with yet another Amazon purchase 😜
Sorry! 😬
Same 😂
Dear Jon, I did it again.... But first: I really enjoyed your 2023 videos, and concerning your EDC pouch update, that also included some interesting ideas (have a prepaid credit card with you, simple and smart!) I got aware, how much brain work you are investing: from thinking about situations, you want to be prepared for to how you want to face them, i. e. finding the most appropriate items, and finally making them fit into the pouch. Respect!
This time I couldn't ignore your recommendation on the JB Elko - I have just ordered it. ;-)
Looking forward to more interesting stuff, wishing you all the best,
cheers
Frank
Hi Frank, I'm sure you'll be happy with it.
@@JonGadget Just would like to confirm: it's a great small knife, fully like it.
Hello, the magnets in the pry bar will act as an extension when the gap is too wide. Thanks for your channel
yes - or someone mentioned a pivot point
Lots of goodie’s here . Thanks for sharing …
Thanks for watching!
In love with that James Brand Elko. Will need to see if my budget will stretch to it.
@@Probeionic Thanks! That seems much more reasonable.
@@Probeionic wonder where TJB got their “inspiration” from…
Worth researching James Brand. I think the steels they use etc are not usually very good. For some this isn’t an issue but for the prices they’re charging you’re paying a premium price for less than premium steel.
I wonder which came first JB or Whitby......blade shape not as nice but price is very nice
Received the Whitby Sprint in black today. It's fantastic. Looks cool, has a lovely weight to it - hard to see how it could be bettered for £15!
Bit Bar + Leatherman Ratchet Driver--OW OW OUCH, Sticker Shock!! Almost $200 😪
I was thinking you could buy a good Wera brand driver with stored bits for a lot less.
yes - v.expensive
Wera do have lots of great options too
Never disappoint ❤ I love your reviews 🤗
Thank you Michelle
Great stuff man!
Appreciate it!
Hi. Try Fenix pd36r pro
I got given some of those zippo hand warmers by a neighbour as i work outdoors, they were a nightmare.
You don't say why?
@@JonGadget Zippo hand warmers suffer from cold shock which stops the catalytic process. But still a decent hand warmer. I prefer the Peacock hand warmer no cold shock issues.
I wonder if the magnets in the pry bar aren't purely cosmetic, but instead they can be used to add leverage to a pry, like putting a 2x4 under a hammer when you remove a nail?
Have you seen the Knyphe EDC phone case? It’s certainly cool! Not uk friendly though sadly!
Hallo Jon,sehr interessantes Video,Super wie immer!!!
Habe deine Handschuhe bei 11:00 gesehen,sehen sehr interessant aus...
Gruessle 😀👍
Black Diamond Ski Gloves - had them a few years!
Thanks dad
If I may ask, why did you get out of the gadget shop? Shrinkage? Seems like a great concept.
I have the Bit Bar 1 and BID could have designed better or there wouldn’t be a V2, it’s in my kit but def not worth the money.
I’d recommend Fenix all day long, I have three of their lights (LD30, TK35UE❤️ and the HM65R-T.
Boker or SpiderCo for my EDC knives, cheap cheerful and reliable.
The electric Zippo hand warmers work great but I just don’t use them, I only wanted them for stealth camping but they’re just too heavy.
I got a lovely double ended Snap-On pry bar from work, I’d never replace that.
great feedback - thanks for sharing
Regarding your assertion @ 4:30 that TIR lights somehow can not be good throwers I'd like to call your attention to the Sofirn IF22A and IF19 with ranges of 697m and 461m respectively.
It was more about the compact size of the lens (width and depth) limiting the range - The Sofirn is optimised for range and does not have a compact head.
@@JonGadget With all due respect, the Fenix E35R and the Sofirn IF19 both have identical size lenses (25mm).
Hello Jon- this is off topic for this video but would you consider doing a carry video for suitcases (hard side or soft) for the overhead bin on a plane? And for a larger suitcase for a long international trip? Much appreciated! Great stuff you preview and my credit card goes for many of your recommendations. Best regards!
I intend to do more travel gear so I wouldn’t rule it out for the future. Thanks for the feedback Denise.
I like the Bit Bar II but at the price with the currency conversion from USD to AUD I think I will keep to using my Tactica Hex bit tool kit in all honesty as it's just the smart more cost effective move, I like the james brand Elko, i think it's a good piece of kit that might be a worthy investment. I realised the Wave+ doesn't have a lanyard hole in the aussie version lol
Great feedback and makes perfect sense. Are you sure about the lanyard hole, it takes some finding but I bet it’s there…..
@@JonGadget yep it’s not even on our specs sheet
Link to your gloves? Thanks for the vids! 10:58
Love you channel!!
thank you
I see you're sporting a new watch, not sure if you collect them or not, but have you thought about doing any watch based videos? Great collection as always, take care.
Funny you should say that. Next Saturday 🫢 is my new watch!
The James Brand Elko knife cost 70€ and Whitby sprint knife cost 17€. They are basically the same knife with same materials etc.
Yep. Diesel Jeans cost €150 and ASOS Jeans cost €40 again same materials. We all know why. A bit of additional quality, design and a brand you can buy into if you want. Good to have the choice I would say.
That Bitbar is next level.
Not cheap but really nice
The Bitbar II with the Leatherman ratchet extender would go for a whopping $220! That's a mini kit not made for the rest of us.
Great review !!
thank you
You should check out the acebeam e70 mini... Its the best edc flashlight on the market: Usbc charging, tail switch, compact, 2k lumens and removable battery.
I'm a big fan of Acebeam - this one looks a little fussy to me though
Impressive the Fenix TK20R, I'm gonna compare it to one of the Olights, been thinking about picking-up an Olight but gonna def check out Fenix before I do. I don't necessarily need the most compact flashlight, the size of the Fenix looks compact enough for me anyway.
Olight good too - I just struggle sometimes with mag charging - works well but requires bespoke charging cable - both good makers though
Ok, Fenix NEEDS to make an updated LD12 thats the smaller brother to the E35R, it's about time they give it an update!!
agree!
Jon: Do you have a recommendation for a flashlight to be used at home where portability isn't a concern? I live in the country and would need it for taking the garbage out at night, walking around the property... I think it would need flood and spot, high lumens, and a long throw. Thanks!
Take one of the head light so you can have the hands free IMO. I use a cheap one for the same reason and they are much better than regular to take out the trash when dark outside
Hey Jon, when I saw the magnetic squares, I immediately thought they could be used to create more leverage? Could this be the case??🤔
It could def work but I don’t think that was the plan!
Really enjoy your reviews. I purchased the Victorinox Complete and want to switch out the scales to titanium.
Would you please recommend a site you trust for good fitting. Thank you!
Hi Susan. I’ve only ever purchased scales on Etsy and fitted them myself. Some googling may be?
I love U wish you safe and healthy ❤
if the james blade locked then it would be perfect.
It would make it illegal to carry in UK and some other countries - not sure a knife this size needs one - always going to be safer though
Easy way to extinguish those zippo hand warmers is to stick them (in their holder) into a ziplock bag.
Thanks for that
My Zippo handwarmer is crap; only got it working once or twice and just can't fathom why it doesn't work anymore.
Awesome video …. What kinda watch is on your wrist ??
Luminox - video coming on Saturday!
@@JonGadget looks good looking forward to getting a closer look 👀👍🏽
How would you compare the force required to deploy the blade on the Elko with the blade/tools on the Victorinox Alox Pioneer X?
Well, hard to compare as the Pioneer X is twice as large! The tension is high on both but the Elko is easier.
@@JonGadget Alright, thanks a lot!
Unobtanium was what they mined on Pandora.
Can't seem to find the E35R. E36R exists. So possibly been replaced?
I don't think it has been released yet! I got a very early review sample suggest keep checking
I live in a town called Elko.
It must be named after that knife!
👍, not on topic but need help. Can I put a sak in my non carry luggage (in the boot) of the plane? Family hols in Majorca. ?? Any thoughts?
Yes, not a problem if checked-in. Check carrying laws for destination for any restrictions on arrival.
thanks Jon...Great Video . What watch are you wearing.?
Luminox - will feature next week!
I allways wonder how the light ranges are determined since every source of radiation emitts to an infinite distance.
Those gloves are interesting, can you share more about who makes them?
Black Diamond Ski Gloves - had them a few years!
@@JonGadget Thanks Jon I really enjoy your channel!
I feel sorry for you guys in England and the U.K. You can only have a blade of a certain length. Yesterday I carried my Bowie Knife around all day and nobody cared. Great channel BTW 👍
I'd be happy just to carry a Leatherman without breaking the law! Thanks re channel.
Hello !! What’s the brand and the model of the Watch you’re wearing in this video please ? Bye
Luminox.
Yes - Luminox - video coming up next!
I have a Victorinox question I’m hoping someone hear can answer for me. I have a huntsman and I’m wondering if I screwed up my reamer. I very foolishly, late at night and half awake, opened tools on both sides to send my friend a picture. The reamer now has some significant movement. Not side to side play but it goes towards closing the closing position very easily. I can’t remember if it was like that before, does anyone know if this is normal or if I did some damage to it:(? Thanks in advance. P.s: I love this channel
hi jon love the videos what watch are you wearing please, sean
It's a Luminox Sean. I've already asked him about it on his first video of 2023. Jon said he will do a full review in it later pal.
Luminox - review planned for Saturday!
Should I get the RovyVon Aurora A3 Pro or the RovyVon Aurora A8?
depends if you think you will use the in-body lights of the A8 - if so I would go for that (it's my EDC) if not A3 Pro is fine but make sure you go for Gen4 with USB-C
Thanks for the advice!
Hey Jon, found an item you may want to have a squiz at. Check out item ADP05 from Makita. Turns your work tool batteries into a power bank for your electronic devices. Finding it very useful at moment in adverse weather we are having in NZ. Cheers Stu
will check it out 👍
85usd for a pry bar? A piece of metal that is used to pry??? Simply ridiculous and proof that the edc crowd has become a lucrative market.
Great haul!
So Jamie's gift was actually making you to pay 20 pounds, huh
Yes, good point Eyal!
Yo what watch is that
That side button style on the Fenix gets bumped way too easily when stowed away in pouch or pocket. I’ll never buy another side button that isn’t recessed.
Can't say I like the fidget pry bar, it just feels a little bit too much like edc collector tat. The bit bar on the other had does look like a decent design, if a little pricey.
I tend to agree
I don’t understand EDC pry tools. I can’t imagine needing to carry a stand-alone pry tool. My car and garage are generally nearby. And $85? Yeesh.
People do carry them though - I don't generally
That tiny fuel can 🤣
historically speaking 21700 come in 4000mAh. never have i ever seen a 5000mAh cell, and i worked selling vapes (where the absolute best batteries are a must) and i would have known of 5k batteries. even if by some miracle they crammed more in those cells, they would not last more than 6 months with constant use due to overheating.
realistically, samsung cells with 4000 mAh are your best bet for longevity and performance.
to whoever doesn't agree with me, fight me.😂
I don't get equating pounds to dollars in your price info. There's a 25% surcharge for the same amount in dollars. It's not nothing. I think you should quote both prices if you want but can't say will cost 100 pounds or dollars.
No way I'm paying $120 for the Big Idea Design bit bar. That's a total ripoff. I found a Steelman version for $26! No go on the Zippo hand warmer - too old school: messy & smelly. I think you're better off getting one of those rechargable electric hand warmers. Ti Bar for $80 - no; there are cheaper and better pry bars on the market.
Don't forget - this is not a sales pitch - it's showcasing a mix of products
hand warmer turn OFF, take the element off with glove or pliers, set on something not meltable
and the non-Zippo version my father had never needed a new element, today's cheap china crap...
retractable tether, I believe Gerber Knives makes something like it
Thanks for sharing Elizabeth
Why don’t you do giveaways to your subscribers
that flashlight is cool but by no means an edc. the zippo is not an edc either.
I spent some time at the North Pole some time back I would have loved to carry the hand warmers everyday when I was there - I know people who carry a torch everyday for work too
i consider a edc something that is comfortable and easy to carry in a pocket. pants pocket. those 2 items are way too bulky.
Hello John, I do believe your channel was spammed. Indeed I received a message asking me to connect on Telegram which does sound odd to me. Still like your channel though :)
Yes - that would be spam - it's the curse of YT comments! I'll look for it and block it.
Am I the only person who would like to do away with the strobe function? I recognize those who have tactical delusions, but really!!! What an irritation to have to cycle past that thing! The Fenix looks quite good beyond that. I would rather have a moonlight mode than strobe. But I can give that up for the long life at 50 lumens. So why not just skip the strobe, too?
I agree - I'd rather have direct access to turbo
thirst trap thumbnails by the old man
?