AnyCubic Kobra Unboxing and First Print
ฝัง
- เผยแพร่เมื่อ 27 มี.ค. 2022
- Hi and welcome to the start of our 3D printing . We have been kindly gifted an AnyCubic Kobra printer prior to its release . We have had it around three weeks now and today 28th March 2022 is it’s official release date .
Enjoy the video and please ask any questions .
We will be doing follow up videos to show any tips tricks and changes we have done following this video - ตลก
This is was a wonderful video all the other didn’t take the time to show the assembly this was very helpful
Excellent, professional video. Thank You
My man been talking like dr. snape from harry potter
Great video!! thanks a lot!!
Thanks Glad you liked it
Just found this video. Thanks for the detailed setup. BTW,was that a cat I heard meowing in the background:)?
So i just got mine and... I have very mixed feelings about it. I often find it does layer shifts and stuff...
You have some bits and pieces
Do I have to change temp settings every time I print
Can you tell me the height of this printer, please?
Can you please help me out, my kobra Neo has a crooked head and the leveling sensor is higher than the nozzle
Very helpful set up video for us newbies. QQ- is there any risk of damage to the bed if you over estimate the z offset on this machine? What exactly am I looking for when dialing in the z offset?
I just purchased an open box Kobra so fingers crossed I didn’t buy a lemon.
You would adjust that height with a sheet of paper between the extruded and the bed, adjust it down until there is a very slight drag on the paper, then you should be properly set
@@elis51501 neat, just the answer I was looking for. TY!
Help !
The Kobra printer only recognizes the supplied Micro SD. Others don't read any file content. (even better quality Micro SD). I tried to clone it, format it, make it identical, but nothing. It only recognizes the one supplied. How can I do????
Thanks in advance
Thats bizarre. My sd that came with it got fried and I've only been using a different one
Double-check your file format when you formated the new card.
Thanks , did you try Petg on his printer ?
I have and it works just fine . 230 temps
@@rodneyhowe Cool! Thank you !! Subscribed !!
Hi, what software did you use for slicer?
If im correct the sd card included keeps download files for anycubics own slicer
So i just set mine up and have an issue with the printer oozing some filament while getting ready to print. I assume this is normal because of heat. However it messes up the print to the point where it snags on its self due to the amount of filament.
Any advice? Ive currently got the owl printing and it seems okay now. However its a pain in the butt
Hi . Wait until it stops oozing and is fully heated then remove the filament underneath . I use a sheet of paper . Make sure your z offset is right as well
@@rodneyhowe it seems okay. I think the file for the owl isn't great? It finished and its not perfect because it did snag about half way through but as the layers were being made it covered over it.