วีดีโอ

I have recently started using mine I got for a christmas gift. This is extremly helpful as I also didnt know the mat could be removed to get the print off

So i just got mine and... I have very mixed feelings about it. I often find it does layer shifts and stuff...

If I press pause, it says waiting for cache command. I wait 10 minutes and it still says the same thing. What could I do?

I was 17.5 hours in, and was about to head to class for 3 hours. You saved my print, chief. Big thanks

Is it worki on anycubic kobra 2 plus?

Thank you for posting this video. Very helpful. 👍

Just want to thank you for creating this video. The beginning code you shared and using the kobra profile on this particular model makes a huge difference to the quality of the prints. Having it run that line in the beginning is a game changer .. why wouldn't they just include this by default

Are there any problems when pulling it out with it clogging or anything?

Thank you very much. I actually rushed and didn´t realize that some melted PLA came down when I put the new one. Lesson learnt!

Just found this video. Thanks for the detailed setup. BTW,was that a cat I heard meowing in the background:)?

incredible car 😍 (is it possible to raise the chassis a little from the ground? to avoid scratches?

beautiful 😍

Hello what do I do when it keeps saing cach command waiting to complete ?

What did you put on the truck to give it the dirty appearance?

That looks so good

Stock electronics on both?

tysm

So i just set mine up and have an issue with the printer oozing some filament while getting ready to print. I assume this is normal because of heat. However it messes up the print to the point where it snags on its self due to the amount of filament. Any advice? Ive currently got the owl printing and it seems okay now. However its a pain in the butt

You pull it out using that lever, do you not have issues with the end of the PLA still being hot? On the first day I got my printer I ended up getting the tip of my PLA stuck, slightly melted onto the gears that feed the filament in and out. Just wondering if you've had issues with that, I didn't really know what I was doing so it could be user error

You have some bits and pieces

My man been talking like dr. snape from harry potter

Can you please help me out, my kobra Neo has a crooked head and the leveling sensor is higher than the nozzle

What was the end gcode for turning everything off that you had in the video

Excellent, professional video. Thank You

Do I have to change temp settings every time I print

Hi, what software did you use for slicer?

great way to ruin your tube, bad advice

Wow! how do you get it over Gcode?

hello, what gcode configuration did you use? I can't get anywhere with my kobra, at the break it gets stuck on the message: paused waiting for cache command to complete

Did you need to change your filament flow or retraction settings for the direct extruder?

Looking through all these complicated procedures and videos, changing G-code pause etc... and here you go showing it nice and easy and practical! I was going to try this, but watching your video gave me the confidence that it would work and not ruin my print 3 hours into it. Printing away right now and it is working awesome. Changed colours twice already.

I’ve watched this 5 times over 4 months because I keep having to do it and forget how to. Ty for this

Cool tip and project

What is V2, Ender 3 V2?

G92 E0 ; Reset Extruder G28 ; Home all axes G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

I did indeed enjoy! Thanks!

Very helpful set up video for us newbies. QQ- is there any risk of damage to the bed if you over estimate the z offset on this machine? What exactly am I looking for when dialing in the z offset? I just purchased an open box Kobra so fingers crossed I didn’t buy a lemon.

When I pause the print head doesn’t move away from the print :(

Great video, I tried to change filament because running out, I paused and removed the filament and then tried to add the new filament but was not able to. Tried several times it would not go all the way down? So after watching you video and why slowing down the print speed first then removing and then was able to replace filament and it worked. Not sure what happened with my 8hr print which was lost but need to try changing out filaments on test part more. Still learning...

Nice place man !!!

Thanks , did you try Petg on his printer ?

Can you tell me the height of this printer, please?

Hi! Where could I find a link to the profile?

Great video!! thanks a lot!!

Retraction 6.5 mm on direct drive…

love you this printer 3d

i was surprised at how easy this was. thank you for this video!

Did you need to tighten bed or anything after unboxing your Anycubic kobra? My bed has slight play in it. Do I need to tighten it? Manual didn't state anything about how. I have only been successful at printing the owl 4 times which turnedout well. But Everything else has failed unfortunately. Please help because I'm at my witts end and about to return this Printer

What motors did you use? This setup looks awesome

Help ! The Kobra printer only recognizes the supplied Micro SD. Others don't read any file content. (even better quality Micro SD). I tried to clone it, format it, make it identical, but nothing. It only recognizes the one supplied. How can I do???? Thanks in advance