What makes this so satisfying is the electronic skill set you have. Most of us could do the tool restoration to varying degrees. But not many, myself included, have the ability to build a rechargeable battery from scratch. Very impressive.
Masterfully done. I'm a pretty good DIY guy, but I don't have the skillset to build a battery pack from scratch. Your knowledge of restoration and electronics is impressive.
Funny, I just came in from my backyard shop where I was refurbishing a DeWalt D28402 angle grinder. Everything seems pretty good with it so far, but I ordered two new brushes for it. And this video pops up for me to watch. Amazing what you can do with what looks like total junk if you are willing to clean such power tools up... Thumbs Up!
Hi, this kind of excellence is outstanding and very hard to find, this was done with pride and confidence and it works like new, very impressive video keep up your excellent quality work, ty, Bob,
But doesn't has the same feeling like this one ..,it's indeed different pleasure to rebuilt it with your hands...like to build your own House from the scratch..👍
Curious how the yellow paint on the plastic held up. Seems a cleaner better restore would be ~$25 new clamshells. Also a better idea to modernize by getting 18v tool to 20vMax battery adapter rather than battery and charger bastardization. But I get it, for the sake of it for the video. Just not practical for future use. Plus what did that give you a 3ah battery when an adapter will leave you way more options. Cool ideas though. Nice resto work.
What you are doing a great job, but if you polish the cores, then the lamination is being destroyed, which is there to stop reduce eddy current, will affect the efficiency, eventually will affect the windings also
Dewalt tools are nothing like the old ones. They used to last forever, now you can't even get a year out of them! I've started using matabo. So far they have been bullet proof.
Beautiful work! You should hit up the guys over at torque test channel and see if they’ll give it a few runs on their rig. I’m sure you’d get a shout out on their video if the decided to do it.
What makes this so satisfying is the electronic skill set you have. Most of us could do the tool restoration to varying degrees. But not many, myself included, have the ability to build a rechargeable battery from scratch. Very impressive.
Boş yapma izle
Masterfully done. I'm a pretty good DIY guy, but I don't have the skillset to build a battery pack from scratch. Your knowledge of restoration and electronics is impressive.
Excellent work restoring these old tools is a worthwhile use of your time and effort.
Funny, I just came in from my backyard shop where I was refurbishing a DeWalt D28402 angle grinder. Everything seems pretty good with it so far, but I ordered two new brushes for it. And this video pops up for me to watch. Amazing what you can do with what looks like total junk if you are willing to clean such power tools up... Thumbs Up!
You're absolutely correct. Until you deal with a more recent model with all electronics molded in plastic 😭
Hi, this kind of excellence is outstanding and very hard to find, this was done with pride and confidence and it works like new, very impressive video keep up your excellent quality work, ty, Bob,
Nice guy bob
Takes a lot to impress me. You sir are a wizard. Excellent work
Great job, given what these tools cost, he did well to repair it. The DeWalt DCF899 P2 model purchased new I paid for over 500 €
You are a master at your skill. What a amazing data base of knowledge you have of these tools.
This is wonderful, no doubt, we lack a lot of things to reach this creativity, thank you ❤
Man! My power tools never come with a free snack! 😞
Another great video. Thanks!
You brought it back to life again.
“Ugh dad, wouldn’t you just finally let it go?! We were all pumped to get the new DCF903, but you never let us be cool” 😭
Plot twist. He gets a brand new one for Father's Day.
I'd rather have the old one.
That’s today.
Extra plot twist. He does all this work and the first time he uses it the windings burn out.
Vvjunnn
But doesn't has the same feeling like this one ..,it's indeed different pleasure to rebuilt it with your hands...like to build your own House from the scratch..👍
Excellent video, you made it look easy ! great photography too and was a pleasure to watch..kudos to you
Thumbs up for your work!
Using that tyre repair glue is a verry handy find
I recently bought a DeWalt impact, totally forgot to insert the bug, thank you for reminding 👍🏻
You got it working really well and looking like new. Great work.
Trabalho excelente! Por favor, qual o Software você utiliza para fazer as etiquetas, adesivos ou identificação?
Wonderful restoration very good job
I had that exact same one up until a couple years ago when I sold it but it was still running fine. Was a great impact drill.
Repair and restoration , nice job.
That's some great content and production value. That kit looks great.
hi, i'm new to this business, can you see how i restore? ?.
@@restorationh.i.a7139 ok. i will
You did a very good job, keep it up. Beautiful result 💪👍
hi, i'm new to this business, can you see how i restore? ?.
That is incredible. Well done mate. 👍
Great job! Very nicely done.
Great video good display of fixing instead of throwing away!!
That was a badass video
Great work on the restoration of the unit ( the 18650 part was a great idea I’m out here away to restore my old dewalt batteries now 😁✌️
You should collaborate with torque test channel to see how these restorations stand up :)
잘봤습니다. Good job 👍👍👍
Молодец, хорошая работа, но гайки все таки вручную надежнее закручивать на колесе! Доверие внушает .))))
Only robust tools, huh! Not a single broken tooth! 💪
Interesting project and great job buddy👍
You should make the Ni battery shell to an adapter, to suit new battery, so make your tools range bigger
Did you use plastic primer? Because without it the paint will come off in no time. And put more grease into the gears.
Excelente Trabajo, te felicito. Gracias por Compartir. Saludos desde Venezuela!!!
Awesome Restoration. What color silver did you use for the front?
Uh oh...you forgot to reinsert the worm!! 🙂. Great job!
Curious how the yellow paint on the plastic held up. Seems a cleaner better restore would be ~$25 new clamshells. Also a better idea to modernize by getting 18v tool to 20vMax battery adapter rather than battery and charger bastardization. But I get it, for the sake of it for the video. Just not practical for future use. Plus what did that give you a 3ah battery when an adapter will leave you way more options. Cool ideas though. Nice resto work.
Great work 👍
More impressed by the batteries honestly
Puts a DeWalt drill back together with a Makita drill.. now that’s a fucking Thug Life right there
Thats a impact
‘An’ impact
And its Makita battery screwdriver
@@51-FS well it doesn’t run off coal so yeah your right
@@philipwalton4877 that running off coal comment was hilarious made my day 🤣
Can still use the charger system that you just put the battery drop in? Or do you have to charge the battery like you did?
Great job sir, but why build a battery? Wouldnt it operate better with the stock battery?
Thats pretty bad ass tho🤌🏽👌🏽
This was so relaxing
That’s a smart ass idea putting bearing grease on top of the bearing then just heat it up. You can do that with bearing you cant remove the cover on.
Не понимаю, как так можно обращаться с инструментом, чтобы довести его до такого плачевного состояния? Мастеру моё почтение и лайк за видео!
Обыкновенно,сначало умышленно обольют инструмент всяким говном.а потом якобы реставрируют...не ужели не заметно
Very nice job.
Excellent work 🧡
hi, i'm new to this business, can you see how i restore? ?.
at 9:35, was this filmed during new years eve ?
What kind of grease do you use?? Water grease??
Where did you get new decals?
Woow ese modelo apenas va a llegar a LATAM y tú estás restaurando uno viejo 😂
Great restoration. So much work for no chance of recouping money. Makes for a fun vid though.
hi, i'm new to this business, can you see how i restore? ?.
hi, i'm new to this business, can you see how i restore? ?.
He makes money from the youtube revenue.
Excellent.....great job
Espectacular, un trabajo excelente.
Excellent Work !!! Congratulations
4:11 Tire repair glue - Can somebody tell me what is the brand of this glue? I cannot find it :(
Awesome result.
What you are doing a great job, but if you polish the cores, then the lamination is being destroyed, which is there to stop reduce eddy current, will affect the efficiency, eventually will affect the windings also
Ultrasonic wave can be used for cleaning
Молодец! Красота!
Good job 👍
Well done.
Dewalt tools are nothing like the old ones. They used to last forever, now you can't even get a year out of them! I've started using matabo. So far they have been bullet proof.
Nice job! Should of bought a new clamshell off eBay, would of made it look brand new!! Where did you get the new sticker labels?
I was wondering the same thing
Great work
Difficult in your hands is always easy how is that oh man
can anyone tell me what rotating Brush he used to polish the metal parts at 5:50
It’s just a wire wheel, they fit on bench grinders and some on drills. Easy to find.
What was that spray he used?
Is there any way to use SDS drill bit chuck into 1/2" impact wrench?
At 1:22 mins what kind of press is that?
Hi where do you purchase replacement parts please
Excellent work 👍 ….what’s that rubber glue you used to repair the rubber with?
Subscribed 🍻
Çok güzel oldu. marka etiketini nasıl yazdırıyorsunuz
Amigo excelente proyecto
Hey guys quick question,
Would that custom battery be more powerful than the original DeWalt used?
Of course, nicd is obsolete and wasteful.
What kind of grease you used?
Couldn’t you have got that done under dewalt warranty? Just joking! Great job.
Maybe Ridgid?
Wats the name of the battery tack welder......or add link in description pls
good job, very inspirating!
where did you find the stickers???
Muy buen video, excelente trabajo... Saludos
Very nice!
hi, i'm new to this business, can you see how i restore? ?.
nice video!
Muy buen trabajo!!!
Beautiful work! You should hit up the guys over at torque test channel and see if they’ll give it a few runs on their rig. I’m sure you’d get a shout out on their video if the decided to do it.
I want a second hand impact driver 20v you have
hi, i'm new to this business, can you see how i restore? ?.
Nicely done, thank's for sharing :-)
This is awesome
it's great!
hi, i'm new to this business, can you see how i restore? ?.
This reminds me of when hank hill used a small can of wd40 to fix his big can of wd40.
Whats is bms model?
Glue Rubber?
Very nice
I restored my DeWalt at Home Depot in under 5 minutes.
Very good
💪👁excelente...
Good hit🇮🇳👍👍 Kuki
GOOD SKILL ...