I changed grease in the planetary reductor in my Makita drill and it's actually pretty easy considering I didn't have a manual in front of me. With manual it becomes even easier knowing where every shim goes and in what sequence
I have the same model drill--not quite as bad as that one, but close. I never thought about replacing the chuck. That would solve the most annoying problems it has. Thanks for the video.
@@thenoneckpeoplerepresentat8074 no idea exactly, it wouldn’t release a bit and would sometimes stay on forward when switching to reverse…not sure but sprayed down the nose and it seemed to fix it…
I have the same model, and the original chuck was just fine but it was voluntarily recalled and I sent it in for the service and they replaced the chuck with the third generation (red inset ring on the collar, as included on the 2804) and it was good as new. Mine never had problems and it was ridden hard. You can always ask Milwaukee if they can do anything for you under warranty. Replacing the chuck is easy to do, or you can have a service centre do it for you, whether through Milwaukee or an authorized/certified business.
Ever take apart a M18 2704, completely clean it spotless but forget to remember the order of the million transmission parts in the gearbox and spend 3 hours searching TH-cam for a tutorial video only to find out there isn’t one and have to trial and error it like 4 times? Then find a repair video 3 months after you finally figure it out? Ya… me neither Awesome video!!! 3 months late but thank you… lol Looks great BTW! 👍
Serviceable tools from all major brands have schematics available, typically on the same site you order replacement parts from. Same is true for household appliances, cars, serviceable consumer goods, etc. Next time start searching for schematic and/or service manual and you won't be wasting a whole day and still be thinking about it 3 months later.
I think I bought my Milwaukee Hammer Drill back in 2001-2002. It gets regular use, and aside from having to replace a few batteries (never a good idea to leave it in an unheated garage during the winter), I've never taken it apart to maintain it. It started acting up a few days ago. After changing a bit, I couldn't get it to work in the normal direction, but it would work in reverse. I pulled the battery off and put it back on again, then it worked. Then when I got up on a ladder and had the drill tilted up, it wouldn't work again. Left it for a few days, and it worked fine, but seemed to run out of power quickly. As much as I'd like a new drill with a shorter profile and all the features that I love in this one, I'm not anxious to PAY for it. (New batteries were bad enough!) So thank you for this video. Now I'm gonna crack this puppy open and see how far I can get before I chicken out!
The milwaukee impacts are great and work with hex shank drill bits. You can also go with their M12 line if you use it for lighter duty. Don’t need to, just a thought if it doesn’t work. Good luck with your project!
One wonders what the cost savings is incurred by repairing this drill vs buying a new one. I don't know but if someone does please let me know. It looks like a lot of work went into this repair. Thanks for sharing this video. 😁👍🇨🇱🇺🇸
having repaired a couple of metabo power tools at home before, my experience is that the savings generally don't warrant the effort. I repaired a mid size impact wrench and the gearbox assembly alone (the part that had failed) was 2/3rds the cost of a new tool. If the electronics, the trigger mechanism or the battery had failed also it would've have been cheaper buying new. I have a grinder I wanted to repair but I wasnt sure which part had failed and it was cheaper buying new than starting to disassemble, fault find and order multiple new parts until I got it sorted. I'm not sure why manufacturers make spare parts so expensive.
@@funnystuffenstufff So true. I have some cool 50s to 70s cast aluminum 110v bodied tools I’ve rebuilt and rarely use. It’s not that they don’t work, they’re cool but the newer lithium ion tools work better and parts availability/research can definitely be a chore. I’ve also abused 2 Metabo grinders daily for about 15 years and they just w o n ‘ t die! Their 5’’ and 9’’ grinders are pretty stellar (IMO). Don’t remember how many cordless chucks I’ve replaced though.
@Good Bye You’re right, 100%. It’s a sad fact that today’s products are cheaper to replace than repair. The real cost is hidden though, our grandchildren will pay it.
They come with a five year warranty so if you use it everyday it's well worth buying one. My buddy owns a repair shop and he doesn't see too many Milwaukee's coming through the door.
@@JakePlisskin12 because its lock tight u dope red lock tight is basically permanent seal especially with a small fastner like that .. yea that shit aint ever coming apart again lol.
Used same gen 2 milwaukee working as a fuel mechanic, gasoline and diesel dissolved the rubber molding and the chuck worn out. Still a great drill for a rainy day .
I have this drill and I am about to retire it from mainstream use. In comparison to the new drills, this one is heavy and that really effects it’s daily use. Much cheaper and easier to just replace with a updated drill. Still cool to watch though. 👍👍
@@ziolan8970 if you're a little tight on cash the m12 line is still fantastic. Failing that, ryobi is actually owned by milwaukee but made to a more diy spec
Thanks for the video. Got the same unit and have wanted to do this myself but having this will make it alot easier. Can you do a video on the sawzall next 😋
I have the same 2704, had issues with the collet, messaged Milwaukee and after handing them info and the SER# they said they will send me a new unit. A week later I received a new 2804-20 kit with two batteries and charger, I was blown away cause I expected the tool itself. My older Fuel hammer drill still works but i tried removing the damn collet bolt so I can buy a replacement collet but to avail, is it reverse thread?
I would just buy a new one…the time I spent to restore this I can buy 3-4 new ones but it’s amazing how much effort it take yo make this information out online , thumbs up
Nice work. Nice video. I've got a couple of 18s that are sloppy like you showed. I also have some crap 12 volts that didn't last a year and they don't work.
10 excelente trabajo pero me queda la duda si poner pegamento a tornillo y al chuk sea buena idea pues si vuelve a fallar nos costaría mucho trabajo volver a repararlo Me refiero a quitar estas 2 piezas
I wasn't surprised how quickly and easily the Milwaukee drill was taken apart, but on the other hand putting all of its parts together again is a real headache. You should have mentioned in your video that new and unskilled users of this machine should be careful because reassembling this machine after disassembly is very difficult.
You are freaking awesome I have watched four videos before I found yours and you may not like to call people out but you should as somebody who is competent it is important for people to know that when they get to that video that dude's a nimrod so you have a responsibility to the intelligence of the world to let people know that somebody's not too bright and they shouldn't be listening to them... With great power comes great responsibility. You're my today hero
We would chuck a large allen wrench into the jaw, and slam the allen end with a hammer in the clockwise direction. Do this a couple times, remove the allen wrench, and then loosen the center nut. Worked every time.
Normal wear and tear kind of equals a fair amount of abuse with these tools. A lot of DIYers buy them, but they're built for professionals to use day in and out.
@@ПавелИлюхин-к2л посмотри внимательно что делает этот парень на канале. Это съемка наоборот, испортить, типа починить, в конце показать изначальный вид устройства
Do you have any idea where I can find a drill chuck for a craftsman c3 19volt drill it was a gift a long time ago. I transitioned over to Milwaukee now but still use a few c3 tools circle saw and air pump mostly. Good job rebuilding the drill.
А у меня Милка уже 8 лет, за всё время досталось только импакту больше всего, раз 5 с крыши падал, зимой взял новый помощнее... А ещё у сабельки шина питающая перетерлась в одном месте, а ремонта на 1см изоленты
Ketemu lagi dari komentar sebelah channel ini konten nya mantap semoga bisa kerja sama, kontennya mantap bos trus semangat semoga sukses,salam dari saya...🤣 🤣
At least its functioning. I got one to work on the other day. Said it was fine. Changed the battery with a fresh one and pulled the trigger and it slightly turned led was on then nothing. Its brushless. I tried turning the chuck tight so the motor would rotate but i couldnt turn it. Im pretty sure it should rotate like any other cordless. If he will bring me a battery ill start checking things
Hello, first of all, great videos that you make, but I have a question: where can I get a new part like that, what you show at 6:05 is broken, do you perhaps have a link for me or a number?
Wow these drills have more moving parts than a Swiss pocket watch! Very nice work. How do you clean the rubber over molding without destroying it? I tried to clean a saw up for a present and the black rubber changed colors with just a light scrub.
чтобы следующий мастер просто выкинул шуруповерт. мне на своем пришлось пилить дремелем родной патрон чтобы снять. и это без герметиков. по этому я слегка офигел от того что он сначала не может выкрутить сопорный винт а потом от руки уже откручивает патрон
кстати родной патрон гавно - заказал новый с ебей. пока шел поставил китайскую практику. намного лучше. кому надо могу продать родной патрон по себестоимости
Hi! I'm from Poland. I want to repair the screwdriver according to your instructions. I have play in the head bearing. where can i buy the aluminum part you mentioned
Interesting video..I have the same drill I took to have repaired and supposedly sent back to Milwaukee.Chuck and gear box supposedly replaced.It seemed noisier when returned but worked.Less than a year later in 1 position and when drilling and pressure applied it grinds and slips. Any ideas what has gone wrong.I really don’t use the drill that often.Surprised it is failing already.
Keyless Chuck Assembly and Gearbox costs 150$, new Milwaukee M18-2704 costs 120$. I'm speechless. It's cheaper to throw away as repair. Green world, ecology. 🤦♂️
I found a really nice Milwaukee Fuel hammer drill at a pawn shop for $85. I was going to replace my chuck and screw, but for the hassle of getting the screw out and the parts cost, I just bought the used one for cheaper
Got mine about 2013-2014. Looks way worse than that one. Had it apart a dozen times over the years. It got water down the chuck and now hs a Humming sound off and on.but in saying that it still works good. In fact probably smoother! I expect it to die any moment now. Will either get latest model or try hilti.
I’m sure Milwaukee would just replace it for free. I only buy Milwaukee and have never had a problem, but the only reason I buy it, is because it’s red and for that fact that everyone has told me if I ever have a problem Milwaukee will still be there for me after warranty. Not sure how true that is but I believe it
Great video, I have the same drill but non hammer version. It hasn't had heavy use but has an issue with running slowly or slowly accelerating on full power, and not always reversing is there a specific fix for this issue? Thanks
Likely sometthing related to your switch or the 1 2 speed option could have some moisture or saw dust in their i would first try using compressed air and blowing it out.. if notthing maybe open it using this video as a guide and brush off any dirty components a multi meter and following some guides to test the electrical stuff theres easy replacement parts on ebay
@@calibre00 youre welcome, alot of the time from factory tools come globbed in cosmoline grease. I tend to do a deep clean after my tool gets visually dirty(dust, saw dust, etc.) and use a lithiun based non conductive grease after cleaning with soap and brush.
Where can you find one of these trigger switches? My buddy has a couple year old Milwaukee impact he's giving me if I can fix the trigger, and all I can find are the entire electronics harness
because if you have exact the same model and you want to repair or clean it ,it's nice to see if you do something wrong.much respect for people who does videos like this
Realised my comment came across a bit harsh, i dont mean theres anything wrong with the video its good it just seems like everyone names these types of videos restorations to get more views. Just call it what it is...
I’m glad you used a DeWalt to help out Milwaukee. They are good old friends after all!!!
Yet help none
I'm in awe of anybody that can do this kind of work. I could NEVER get it back together right . . .
You just lay out the parts on the desk in the order you take them apart and you won’t have a problem putting them back together
he got the video xD
I changed grease in the planetary reductor in my Makita drill and it's actually pretty easy considering I didn't have a manual in front of me. With manual it becomes even easier knowing where every shim goes and in what sequence
I'm not even going to attempt it I'm buying a new drill 🙄
It helps to take pictures or video of yourself taking things apart just to stay on the safe side of having to put so many pieces back together.
I have the same model drill--not quite as bad as that one, but close. I never thought about replacing the chuck. That would solve the most annoying problems it has. Thanks for the video.
I had a prob with my chuck till I hit it with the graphene spray…. Fixed all my issues….
@@philwell76 What does the graphite lube do to remedy the worn chuck?
@@thenoneckpeoplerepresentat8074 no idea exactly, it wouldn’t release a bit and would sometimes stay on forward when switching to reverse…not sure but sprayed down the nose and it seemed to fix it…
I have the same model, and the original chuck was just fine but it was voluntarily recalled and I sent it in for the service and they replaced the chuck with the third generation (red inset ring on the collar, as included on the 2804) and it was good as new. Mine never had problems and it was ridden hard.
You can always ask Milwaukee if they can do anything for you under warranty. Replacing the chuck is easy to do, or you can have a service centre do it for you, whether through Milwaukee or an authorized/certified business.
I just swap it out for a keyed chuck immediately
I've had this drill for about 6 years constantly working with hardwood. Great tool, very reliable. Dropped into a bucket of water and still works.
The metal roof installer left his drill in my yard over a very rainy weekend, the drill and charger still worked fine, that’s when I bought mine.
Ever take apart a M18 2704, completely clean it spotless but forget to remember the order of the million transmission parts in the gearbox and spend 3 hours searching TH-cam for a tutorial video only to find out there isn’t one and have to trial and error it like 4 times? Then find a repair video 3 months after you finally figure it out?
Ya… me neither
Awesome video!!! 3 months late but thank you… lol
Looks great BTW! 👍
In my Makita you can't assemble it the wrong way because every gear has different inner diameter
Serviceable tools from all major brands have schematics available, typically on the same site you order replacement parts from. Same is true for household appliances, cars, serviceable consumer goods, etc. Next time start searching for schematic and/or service manual and you won't be wasting a whole day and still be thinking about it 3 months later.
I think I bought my Milwaukee Hammer Drill back in 2001-2002. It gets regular use, and aside from having to replace a few batteries (never a good idea to leave it in an unheated garage during the winter), I've never taken it apart to maintain it. It started acting up a few days ago. After changing a bit, I couldn't get it to work in the normal direction, but it would work in reverse. I pulled the battery off and put it back on again, then it worked. Then when I got up on a ladder and had the drill tilted up, it wouldn't work again. Left it for a few days, and it worked fine, but seemed to run out of power quickly. As much as I'd like a new drill with a shorter profile and all the features that I love in this one, I'm not anxious to PAY for it. (New batteries were bad enough!) So thank you for this video. Now I'm gonna crack this puppy open and see how far I can get before I chicken out!
The milwaukee impacts are great and work with hex shank drill bits. You can also go with their M12 line if you use it for lighter duty. Don’t need to, just a thought if it doesn’t work. Good luck with your project!
Impressive rebuild skills. Also shows how much gunk & sawdust can get far down into the drills. But that was an old or heavily used hammer drill.
I took my old drill apart last year and couldn't figure out how to get it back together you just saved a drill for me
One wonders what the cost savings is incurred by repairing this drill vs buying a new one. I don't know but if someone does please let me know. It looks like a lot of work went into this repair. Thanks for sharing this video. 😁👍🇨🇱🇺🇸
having repaired a couple of metabo power tools at home before, my experience is that the savings generally don't warrant the effort. I repaired a mid size impact wrench and the gearbox assembly alone (the part that had failed) was 2/3rds the cost of a new tool. If the electronics, the trigger mechanism or the battery had failed also it would've have been cheaper buying new. I have a grinder I wanted to repair but I wasnt sure which part had failed and it was cheaper buying new than starting to disassemble, fault find and order multiple new parts until I got it sorted. I'm not sure why manufacturers make spare parts so expensive.
Depends where you are. Sometimes skilled labor like this is cheaper than a new tool.
@@funnystuffenstufff So true. I have some cool 50s to 70s cast aluminum 110v bodied tools I’ve rebuilt and rarely use. It’s not that they don’t work, they’re cool but the newer lithium ion tools work better and parts availability/research can definitely be a chore. I’ve also abused 2 Metabo grinders daily for about 15 years and they just w o n ‘ t die! Their 5’’ and 9’’ grinders are pretty stellar (IMO). Don’t remember how many cordless chucks I’ve replaced though.
@Good Bye You’re right, 100%.
It’s a sad fact that today’s products are cheaper to replace than repair.
The real cost is hidden though, our grandchildren will pay it.
They come with a five year warranty so if you use it everyday it's well worth buying one. My buddy owns a repair shop and he doesn't see too many Milwaukee's coming through the door.
Lots of work, great result. Looks like you know your way with assembly and parts available.
Red locktite. Looks like it’s never gonna be torn down again.
How not?
@@JakePlisskin12 because its lock tight u dope red lock tight is basically permanent seal especially with a small fastner like that .. yea that shit aint ever coming apart again lol.
@@JakePlisskin12 it’s red locktite lol
@@JakePlisskin12 Red loctite is a near permanent fix, blue loctite is more difficult than without but not as permanent as red.
Milwaukee guys hate Makita so badly that they won't even use blue loctite
It sounds so happy at the end. Good job!
i have the exact same drill that i want to do this to. thank you for this video.
Amazing that he film this. Gotta love ppl like this!!!!
@Good Bye I do.
Get a full new gearbox much easier and better in the long run
Be careful when taking off the chuck you can snap the gearbox very easy cause most of the time it's seized
Used same gen 2 milwaukee working as a fuel mechanic, gasoline and diesel dissolved the rubber molding and the chuck worn out. Still a great drill for a rainy day .
I have this drill and I am about to retire it from mainstream use. In comparison to the new drills, this one is heavy and that really effects it’s daily use. Much cheaper and easier to just replace with a updated drill. Still cool to watch though. 👍👍
Send it my way and I’ll gladly add it to my fleet lol
@@CalebsCars I’m thinking the same, I don’t have much money to spend on tools, so I’ll take the more cumbersome weight to save some extra money.
@@ziolan8970 if you're a little tight on cash the m12 line is still fantastic.
Failing that, ryobi is actually owned by milwaukee but made to a more diy spec
@@morscovium8881 thats why i try to fix my phones at least once before buying a new one.
"affects its daily use" you don't use a drill daily. That's cap 🧢
So far thats the best model they ever did, bought mine in 2014 Just die in 2022, it got repaired once, I heard the new ones don't do that good.
This ia a great educational & instructional tutorial, even without verbiage, well videoed also! Well done, thanks!
It is nice to be able to get parts to be able to make these repairs.
where did he get part from
Ave would be proud with that clamshell elation separation
That poor Milwaukee drill just needed some love ❤️ ❤️❤️🙂🙂🙂 make Milwaukee great again 🙂 nice job 👏
Thanks for the video. Got the same unit and have wanted to do this myself but having this will make it alot easier. Can you do a video on the sawzall next 😋
Thnk u so much for your video. It definitely helped me take it all apart and back together again and gave it a good cleaning. 😁👍
I have the same 2704, had issues with the collet, messaged Milwaukee and after handing them info and the SER# they said they will send me a new unit. A week later I received a new 2804-20 kit with two batteries and charger, I was blown away cause I expected the tool itself. My older Fuel hammer drill still works but i tried removing the damn collet bolt so I can buy a replacement collet but to avail, is it reverse thread?
Should be.
How did you message them? Also are you in the UK 🇬🇧
That's overkill on the loctite. All you need is a drop or two at most for a bolt that size
I'd get it if he used blue but he used red😭
Correct both comments. Only high-heating will save him next time.
Maybe important due to the hammer drill function which might shake it loose otherwise.
Nope still overkill
sand blasting is my favorite part in these restoration videos
Very professional work, Thanks my friend ♥️♥️♥️♥️♥️♥️♥️
I would just buy a new one…the time I spent to restore this I can buy 3-4 new ones
but it’s amazing how much effort it take yo make this information out online , thumbs up
With that logic, in the same amount of time you'll buy 3-4 new drills. I'll buy your mom
Impressive my friend thanks for the video it will no doubt help a lot of people including me. Thanks
Nice work. Nice video. I've got a couple of 18s that are sloppy like you showed. I also have some crap 12 volts that didn't last a year and they don't work.
That Milwaukee has put in some work gentlemen ☺️
Thanks for the video, i was just wondering where you could get the spares from? cheers
10 excelente trabajo pero me queda la duda si poner pegamento a tornillo y al chuk sea buena idea pues si vuelve a fallar nos costaría mucho trabajo volver a repararlo
Me refiero a quitar estas 2 piezas
Es un fijador solamente y no hay ningún problema en quitarlo !
You replaced more than you restored
Some parts can’t be fixed once they wear out like that what u expect …
I’m going to need this guy on my team during an apocalypse.
I wasn't surprised how quickly and easily the Milwaukee drill was taken apart, but on the other hand putting all of its parts together again is a real headache. You should have mentioned in your video that new and unskilled users of this machine should be careful because reassembling this machine after disassembly is very difficult.
You are freaking awesome I have watched four videos before I found yours and you may not like to call people out but you should as somebody who is competent it is important for people to know that when they get to that video that dude's a nimrod so you have a responsibility to the intelligence of the world to let people know that somebody's not too bright and they shouldn't be listening to them... With great power comes great responsibility. You're my today hero
Complimenti per la precisione e competenza.
i have the exact same drill with a broken anvil and i was wondering where you got yours sinc i cant fined any
We would chuck a large allen wrench into the jaw, and slam the allen end with a hammer in the clockwise direction. Do this a couple times, remove the allen wrench, and then loosen the center nut. Worked every time.
Yeah I've had plenty of people snap the bolt trying to get it out
Beautiful job!
Were the damaged parts the result of 'normal' wear and tear or of misuse?
More than liekely dropped it just right and bent it. I’ve done the same thing at work a few years back
@@allsummerlong1238
Thanks
Normal wear and tear kind of equals a fair amount of abuse with these tools. A lot of DIYers buy them, but they're built for professionals to use day in and out.
Круто! Молодец! Дал вторую жизнь хорошему инструмену.
ага. учитывая то что милвоки недавно появились, ушатал чуть поюзанный, насыпал туда песка, поломал, теперь восстанавливает. Вторая жизнь, ради денег
@@vadimp1374 изучи историю Милки. Недавно появилась....
@@ПавелИлюхин-к2л посмотри внимательно что делает этот парень на канале. Это съемка наоборот, испортить, типа починить, в конце показать изначальный вид устройства
How in gods name do you keep track of all those parts? Great stuff.
That's why it's filmed. The camera never forgets.
Milwaukee have nice easy to read schematics
One thing I’ve learned from this video ,,, never even attempt to take one of these to pieces
Отличная работа! Какого года эта дрель?...
Crazy, and to know what parts to replace. Wonder if you work for a similar company or just a savy engineer. Great work sir. Just purchased my 2804-20
Do you have any idea where I can find a drill chuck for a craftsman c3 19volt drill it was a gift a long time ago. I transitioned over to Milwaukee now but still use a few c3 tools circle saw and air pump mostly. Good job rebuilding the drill.
Когда-то я хотел Милуоки...
Сейчас имею дрель Makita 484, DeWalt dcd 796.
И скажу что уже более 4 лет полет супер.
А у меня Милка уже 8 лет, за всё время досталось только импакту больше всего, раз 5 с крыши падал, зимой взял новый помощнее... А ещё у сабельки шина питающая перетерлась в одном месте, а ремонта на 1см изоленты
best Milwaukee drill ever made!
Good video but I want to know what driver you are using and where you got those driver bits.
Ketemu lagi dari komentar sebelah channel ini konten nya mantap semoga bisa kerja sama,
kontennya mantap bos trus semangat semoga sukses,salam dari saya...🤣 🤣
Exelente restauracion saludos desde panamà👏👍🇵🇦👌💪
At least its functioning. I got one to work on the other day. Said it was fine. Changed the battery with a fresh one and pulled the trigger and it slightly turned led was on then nothing. Its brushless. I tried turning the chuck tight so the motor would rotate but i couldnt turn it. Im pretty sure it should rotate like any other cordless. If he will bring me a battery ill start checking things
Can you buy individual gear box parts for this drill? My ring gear (the one that moves when you shift 1st and 2nd gear is worn down on the outer cogs
Hello, first of all, great videos that you make, but I have a question: where can I get a new part like that, what you show at 6:05 is broken, do you perhaps have a link for me or a number?
Good job on that repair, what model is the Maquita drill you were using for the repair? Sounds pretty solid
I hate when I need replace Milwaukee drill chuck because of that screw, but I'm using alen key to unscrew, but I put drill in vise
People who invented all these mechanisms were geniuses
So many little bits! Is there somewhere a schematic to assemble it all back together?
With wich solution you clean de metal parts?? Amazing video!!
Ultrasonic cleaner will be your best friend 👍 great vid
Wow these drills have more moving parts than a Swiss pocket watch! Very nice work. How do you clean the rubber over molding without destroying it? I tried to clean a saw up for a present and the black rubber changed colors with just a light scrub.
только один вопрос: зачем сажать на герметик патрон, да ещё и в таком количестве его лить?
Тоже удивил такой жирный слой локтайта и на патрон и на винт контрящий
чтобы следующий мастер просто выкинул шуруповерт. мне на своем пришлось пилить дремелем родной патрон чтобы снять. и это без герметиков. по этому я слегка офигел от того что он сначала не может выкрутить сопорный винт а потом от руки уже откручивает патрон
кстати родной патрон гавно - заказал новый с ебей. пока шел поставил китайскую практику. намного лучше. кому надо могу продать родной патрон по себестоимости
This is a great video well done
Hi! I'm from Poland. I want to repair the screwdriver according to your instructions. I have play in the head bearing. where can i buy the aluminum part you mentioned
Excellent video.
Well done sir, great job.. what do you think of the parkside brand?
Good work 👍👍👍Thank you for sharing. Be safe
This seems to be much harder to maintain than an impact wrench or driver?
Very difficult to re assemble the parts you pro master
👍👍👍
Where did you source spart parts for the gearbox? I only need the parts on video at 3.11
Good video
Where did you get those broken parts?
The broken parts were taken off the drill 😊 hope that helps
Where Can you buy the new piece that is held on by 3 screws on the front of the gearbox assembly?
Where do you buy this kind stuff? How much do you charge to do this kid of job on this piece?
Its cheaper to just buy a new drill
So satisfying
@Repair&Restoration I have similar broken bits inside the gearbox. Can you send me a link to purchase replacement parts?
After seeing this the price of a new drill is a bargain!
I hope i can have one of those brands milwaukee.. even after recondition its okay for me
Interesting video..I have the same drill I took to have repaired and supposedly sent back to Milwaukee.Chuck and gear box supposedly replaced.It seemed noisier when returned but worked.Less than a year later in 1 position and when drilling and pressure applied it grinds and slips. Any ideas what has gone wrong.I really don’t use the drill that often.Surprised it is failing already.
У меня такой же шурик. Неубиваемый. Купил в 2015 году. Только аккумуляторы потеряли в ёмкости. А так мощный. Один только минус,тяжеловатый.
Keyless Chuck Assembly and Gearbox costs 150$, new Milwaukee M18-2704 costs 120$. I'm speechless. It's cheaper to throw away as repair. Green world, ecology. 🤦♂️
what type of greese do you use for power tools? ive been having a hard time finding stuff that actually works
molybdenum disulphide grease (CV joint grease) is good for metal vs metal parts
Use Lucas Red 'n Tacky
Out of curiosity, how much did the new parts cost ? Amazing job btw !
plus the labor, and that work doesnt look like a minimum wage... lol guess most of the times buying a new one is the best choise
I found a really nice Milwaukee Fuel hammer drill at a pawn shop for $85. I was going to replace my chuck and screw, but for the hassle of getting the screw out and the parts cost, I just bought the used one for cheaper
Wow these drill mechanisms are quite complex!!
nice work man!
Got mine about 2013-2014. Looks way worse than that one. Had it apart a dozen times over the years. It got water down the chuck and now hs a Humming sound off and on.but in saying that it still works good. In fact probably smoother! I expect it to die any moment now. Will either get latest model or try hilti.
Nice video mate 👌
Какой молодец почистил и смазал)))))
I’m sure Milwaukee would just replace it for free. I only buy Milwaukee and have never had a problem, but the only reason I buy it, is because it’s red and for that fact that everyone has told me if I ever have a problem Milwaukee will still be there for me after warranty. Not sure how true that is but I believe it
Really well done and informative video. Thanks for this!
Perfect,god bless your hands
Excellent job, but I’m not sure about the red thread locker.
1:30 very clean^^
Did you have to buy a new/as new drill to do this whole exercise for the spare parts?
Great video, I have the same drill but non hammer version. It hasn't had heavy use but has an issue with running slowly or slowly accelerating on full power, and not always reversing is there a specific fix for this issue? Thanks
Dewalt is your fix.
Likely sometthing related to your switch or the 1 2 speed option could have some moisture or saw dust in their i would first try using compressed air and blowing it out.. if notthing maybe open it using this video as a guide and brush off any dirty components a multi meter and following some guides to test the electrical stuff theres easy replacement parts on ebay
@@voosum thanks it seemed to resolve itself so that sounds likely to have been the issue. Thanks for the reply.
@@calibre00 youre welcome, alot of the time from factory tools come globbed in cosmoline grease. I tend to do a deep clean after my tool gets visually dirty(dust, saw dust, etc.) and use a lithiun based non conductive grease after cleaning with soap and brush.
Well well done! Wow love it
Where can you find one of these trigger switches? My buddy has a couple year old Milwaukee impact he's giving me if I can fix the trigger, and all I can find are the entire electronics harness
Mini power screwdriver company?
Any way to fix the m12 gen 3 impact my drill bit wobbles
Where did you find the replacement parts for the drill
Repair yes .. restore no. Youve fixed and cleaned it, don't know why everyone obsessed with restoring things on youtube.
Let’s see what you have done
because if you have exact the same model and you want to repair or clean it ,it's nice to see if you do something wrong.much respect for people who does videos like this
Realised my comment came across a bit harsh, i dont mean theres anything wrong with the video its good it just seems like everyone names these types of videos restorations to get more views. Just call it what it is...