DeWALT's New VTec Impact Wrench is Ridiculous

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ต.ค. 2023
  • Find it here: amzn.to/3sDXCXh
    Our lifetime worth of TOOL RANKINGS are updated every week: torquetestchannel.etsy.com/li...
    The DeWALT XR DCF961 1/2" High Torque with V-Tec (as we call it) is here! Time to test it against the latest Milwaukee FUEL M18 2967 and we think my to the point, the 2867-20 1" High Torque as well looking at the specs and the just raw performance on this thing.
    Hold onto your hats, she's a wild ride.
    As always, the creator of this channel works in product development for Astro Tools, who also make impact wrenches (air), always consider multiple sources when looking at a tool!
  • ยานยนต์และพาหนะ

ความคิดเห็น • 766

  • @TorqueTestChannel
    @TorqueTestChannel  6 หลายเดือนก่อน +12

    It's pretty much available everywhere now! amzn.to/3sDXCXh

    • @johnathangreay987
      @johnathangreay987 6 หลายเดือนก่อน +2

      So DeWalt beat out Milwaukee then right.

    • @jonaslagerqvist5306
      @jonaslagerqvist5306 5 หลายเดือนก่อน

      Not Sweden/Germany. Not even on Dewalts Swedish website :(

    • @johnathangreay987
      @johnathangreay987 5 หลายเดือนก่อน

      @@jonaslagerqvist5306 no I know DeWalt is American.

    • @jonaslagerqvist5306
      @jonaslagerqvist5306 5 หลายเดือนก่อน +1

      ​@@johnathangreay987sorry, forgot that "everywhere" is only USA. My bad

    • @johnathangreay987
      @johnathangreay987 5 หลายเดือนก่อน

      @@jonaslagerqvist5306 you do know that Germany and Sweden are European countrys right?

  • @gamemeister27
    @gamemeister27 7 หลายเดือนก่อน +642

    Yo I didn't know Honda was collaborating with DeWalt

    • @B0B_J0HN
      @B0B_J0HN 7 หลายเดือนก่อน +18

      We’re making them at the greensburg factory lmao 😂😂 would be funny tho

    • @Manu__R
      @Manu__R 7 หลายเดือนก่อน +10

      They make so many things I wouldn't be surprised

    • @mr2_mike
      @mr2_mike 7 หลายเดือนก่อน +16

      But when it kicks in, yo!

    • @THEBEARDEDTOOLGUY
      @THEBEARDEDTOOLGUY 7 หลายเดือนก่อน +11

      Yes had. New ACURA INTEGRA GSR BACK in 1992 that V-TEC was AWESOME and now I NEED THAT NEW XR 961 for some fond memories to start

    • @jakebrake5776
      @jakebrake5776 7 หลายเดือนก่อน +17

      Gotta have something to get their harmonic balancer bolts loose 😂

  • @nate0031
    @nate0031 7 หลายเดือนก่อน +341

    I love the back and forth between the brands. The 2967 will be more than the majority need already, but DeWalt waited for it to be released so they could drop this. Lol.

    • @dsgamecube
      @dsgamecube 7 หลายเดือนก่อน +47

      I think Milwaukee had it right when they opted to decrease size instead of increasing power (much). The DCF961 is a beast, but putting a 1/2" anvil on it is an odd decision. It seems more reasonable to keep the power at DCF900/2967 levels for 1/2" and just make the tool as small as possible, moving up to 3/4" if you need more power.

    • @puterg0d
      @puterg0d 7 หลายเดือนก่อน +10

      @@dsgamecube They increased power substantially. The DCF900 was the undisputed high torque king, crushing the previous M18, and the new one bests the 900 pretty handily.

    • @jordanhensley5713
      @jordanhensley5713 7 หลายเดือนก่อน +1

      @@puterg0d i have a dcf900 i dont know many things that need more uga dugg than what it can provide.

    • @ALEX-xd7ko
      @ALEX-xd7ko 7 หลายเดือนก่อน +9

      @@jordanhensley5713 a 2010 Chevy 2500 plowtrucks Ubolts lol. Literally Tue dfc900 couldn't brake them . My 961 didn't even hit turbo and knocked em loose.

    • @dkannegi
      @dkannegi 7 หลายเดือนก่อน +4

      I nearly broke my DCF900 putting anchors in terrain for a swing set (jammed up the anvil somehow after a 20 second pull, eventually got it free just cycling the tool no load) - will know seasonal tire change time if it got messed up for a warranty claim. Hopefully the DCF961's anvil doesn't have this problem, however at this point I'll only go for it if my DCF900 breaks.

  • @KingYang05
    @KingYang05 7 หลายเดือนก่อน +75

    Turbo AND V-TEC? Must be that new Honda DCF961 Type-R.

    • @jsplasha
      @jsplasha 7 หลายเดือนก่อน +2

      Meh. Turbo VTEC isn't real VTEC. Yo.

    • @RAD-RC
      @RAD-RC 7 หลายเดือนก่อน +3

      ​@jsplasha it's like reverse vtech tbh. Instead of ringing out the engine it pulls like a V8 down low. Makes 2-4k rpm a blast.

    • @pflaffik
      @pflaffik 7 หลายเดือนก่อน +1

      @@jsplasha V-tec wasnt great anyway, it solved a non existing problem with a complex solution. Only engine i ever had with stuck valve problems and cylinder head rebuilds.

    • @darkknight097
      @darkknight097 6 หลายเดือนก่อน +4

      How so? It allowed good fuel economy around town with good performance when getting on it.
      Low cam: less air getting in the cyl, less fuel needed.
      High cam: more air in, more fuel = more power.
      Theres a reason all the performance vtec engines are highly sought after for modding vs the non vtec.

    • @ericlotze7724
      @ericlotze7724 5 หลายเดือนก่อน +1

      This reminds me of that “PS4 vs Xbox One vs Black and Decker Waffle Maker” video college humor did lol

  • @iGame2A
    @iGame2A 7 หลายเดือนก่อน +145

    DeWalt making a statement with the updated tech. Can't wait to see how much further we can take cordless tools in the next few years.

    • @ChuckBeefOG
      @ChuckBeefOG 7 หลายเดือนก่อน +9

      This thing is already going to break sockets and bolts.

    • @TheRealPOTUSDavidByrd
      @TheRealPOTUSDavidByrd 7 หลายเดือนก่อน +9

      @@ChuckBeefOG yup we're way past the strength of a lot of fasteners with these tools. We were past that point five years ago if the tool operator didn't have any finesse. Nowadays it's almost too easy to rip a stud in half on accident.

    • @Dante_S550_Turbo
      @Dante_S550_Turbo 6 หลายเดือนก่อน

      some idiots gonna use regular cheap sockets and it's going to be shrapnel, it's me i'm probably going to do that. @@ChuckBeefOG

    • @W1ldSm1le
      @W1ldSm1le 6 หลายเดือนก่อน +5

      Even harbor freight tools are starting to be better than literally anything available 15 years ago.

    • @briangreenfield7236
      @briangreenfield7236 6 หลายเดือนก่อน +6

      Dewalt will make a 60 volt impact for sure and holy cow that will be some fun to see

  • @AManWith_NoName
    @AManWith_NoName 5 หลายเดือนก่อน +6

    Can DeWalt come out with a 1" gun now?

  • @ThriftyToolShed
    @ThriftyToolShed 7 หลายเดือนก่อน +71

    Wow, That new DCF961 is a power house! You mentioned cordless having its drawbacks, but I don't plan on dragging around no hose, 😂 Great testing TTC!

    • @Comm0ut
      @Comm0ut 7 หลายเดือนก่อน +8

      My air hose doesn't reach into salvage yards where I can't take a service truck and the cost of (good) mobile air compressor new is more than a VERY nice loadout of modern cordless. Except for sand blasting and needle scaling I barely use air any more.

  • @puterg0d
    @puterg0d 6 หลายเดือนก่อน +14

    I have a DCF899. A friend asked me "did you buy it yet" when this video first came out. I told him "No. I don't NEED that! My DCF899 hasn't failed me yet. When I come across something it can't bust free, I'll buy one." That happened last week. Now I have a DCF961, lol. I also bought the DCF891 mid-torque to replace the DCF899 - as my "daily 1/2"". When the 891 can't do it, the 961 will.

    • @cantbuyrespect
      @cantbuyrespect 2 หลายเดือนก่อน

      I have a dcf899 that I used for years as a mechanic. I would take off 33mm truck lugnuts with it that were torqued to 500ft lbs. If my 899 can take off a truck lugnut I dont need anymore then that. I used a Milwuakee 12v stubby to take the f350 lugnuts loose that were torqued to 165ft lbs. these two were a perfect combo of power when you need it and lightweight when you want it.

    • @emmcee476
      @emmcee476 หลายเดือนก่อน

      I've had the DCF891 a few days now and love it. Using it with the 5a Powerstack. Also have the Hercules 1200ft/lb High Torque impact. I don't work on diesel or really heavy duty stuff, so these two tools are a good combination for me

  • @MyOsist
    @MyOsist 7 หลายเดือนก่อน +171

    TTC delivering as always.
    Just so glad that tool companies like Milwaukee that seemed like they were the king at just about everything are really starting to get a run for their money. For some time it seemed like Dewalt was really starting to fall behind. Glad to see them make some strong efforts to come back, especially given im already vested in the Dewalt battey system and only have my feet wet in the Milwaukee M12 system.
    Competition is always healthy for consumers like ourselves. It forces companies to build better and better products at cheaper prices rather than getting complacent due to lack of competition.
    Channels like TTC and Project Farm puts their products under the spot light. I'm sure all the execs are watching these videos.
    Thanks TTC.

    • @SomeoneStoleMyHandle
      @SomeoneStoleMyHandle 7 หลายเดือนก่อน +11

      Agreed, with these new tools stemming from the torque arms race I'm rarely needing to reach for the torch or other implements of unstuckulation for even the worst of stuff I see. However, I fully expect and can't wait for government to somehow shoehorn it's way in, in the name of 'consumer wrist safety' of course, and to double the price of tools for less than half the performance.

    • @brianwelch1579
      @brianwelch1579 7 หลายเดือนก่อน

      @@SomeoneStoleMyHandle Not killing you and still having decent power aren't necessarily mutually exclusive; I really like how the aircat guns don't destroy the operator, at least the ones I've used, at least the hand ON the gun. The one holding the wrench is a total write-off, just order a new one before you start. A short time with an IR was enough for me, my wrist still hurts thinking about that experience.

    • @jamaalburrows9548
      @jamaalburrows9548 7 หลายเดือนก่อน

      Imy jaw droppleed again on yet anogher dewalt shocker unbeleivable

    • @pflaffik
      @pflaffik 7 หลายเดือนก่อน

      As for dewalt midtorque its clearly only an overclocked old model. I cant get over how lightweight and feeble it feels, all that performance in such a design cannot be good for it and the extreme rattling and kickbacks proves that point. The hightorque feels more confident in the hand but still its not much different from the older models, so again, overclocked old tech.

    • @jmanlinc
      @jmanlinc 7 หลายเดือนก่อน +1

      I fear these new tools are going to suffer in the reliability and longevity department, we as a society are starting to get accustomed to replacing our stuff sooner and sooner and won't even realize it

  • @michaelcrumlett187
    @michaelcrumlett187 7 หลายเดือนก่อน +89

    Cool stuff. Been using my 2767-20 for truck lug nuts for years, and it works great on rusted plow bolts. That said, I’d seriously consider the DCF961 (or its 3/4” brother) for my service truck. Nice to have all the beans when you’re on the side of the road swapping grader tires in traffic.

    • @saiiiiiii1
      @saiiiiiii1 7 หลายเดือนก่อน +4

      Do yourself a favor and get the 3/4" for this. I guess the 1/2" version is more of a marketing gimmick. Everyone got 1/2" sockets at home so sales will be at lot higher.

  • @codyjones111
    @codyjones111 7 หลายเดือนก่อน +27

    As a fleet mechanic, i absolutely love the dcf961. Its an animal. Im a team yellow guy and I cant explain how this thing easily pulls off rusted budd lugs.

    • @nevinbontrager8828
      @nevinbontrager8828 หลายเดือนก่อน

      I realize this is an older comment so im sorry to barge in. I own a small fleet (6) of tanker trucks and some of my tankers are old budd wheels. To be able to do them on the side of the road without bringing out air would be a big help. Was running the dcf899h and it dis pretty good. Would this be a big improvement?

    • @codyjones111
      @codyjones111 หลายเดือนก่อน +1

      @nevinbontrager8828 a beyond massive improvement. I still have my 899 and use it daily. I ONLY use this gun for my budd lugs. You can put one on with a 1in impact & and this thing will pull it off on its lowest setting easily

    • @nevinbontrager8828
      @nevinbontrager8828 หลายเดือนก่อน +1

      @@codyjones111 cool! Thanks!

    • @justinmartin8887
      @justinmartin8887 หลายเดือนก่อน +1

      Who the heck still uses buds?

    • @nevinbontrager8828
      @nevinbontrager8828 หลายเดือนก่อน

      @justinmartin8887 well, *raises hand* when you need a very specific trailer and they are custom built and one comes up for sale and you need it, you buy it! 3 of mine are budds and 3 are hub pilot.

  • @toolhead147
    @toolhead147 7 หลายเดือนก่อน +18

    New King 👑. That dewalt is a beast!

  • @yousefalmarhoon8789
    @yousefalmarhoon8789 7 หลายเดือนก่อน +31

    Bravo Dewalt 👏, I am a Milwaukee guy, but man, I like it when I see another company starts a fire in the competition 👌🔥

  • @GetlostwithKenny
    @GetlostwithKenny 7 หลายเดือนก่อน +31

    The DCF900 does everything I need in a ½” impact when i need it over a mid tq. I’m going to wait until the ¾” of this beast comes out, should fit that purpose perfectky

    • @proscriptus
      @proscriptus 7 หลายเดือนก่อน +1

      The DCF900 has such high low load speeds, which makes me grab it more.

    • @deezelfairy
      @deezelfairy 7 หลายเดือนก่อน +2

      I've been holding off on the dcf900 because I've been waiting for a 3/4 variant

  • @drivingmemad7127
    @drivingmemad7127 7 หลายเดือนก่อน +19

    I can't believe how many times I have rewatched this video so far, I get a huge smile every time it hits VTEC! Will be interesting to see if this technology will be implemented in their smaller impacts going forward. Would also be interesting to see if the DCF961 can be modded with the 3/4" anvil and nose cone when DCF964 (maybe) parts become available. Shame you didn't slap on the 15ah Flexvolt for the lolz. Thanks as always TTC!

  • @gwall1789
    @gwall1789 7 หลายเดือนก่อน +23

    I have the DCF899. I was going to get the 900, but with my best Tim Taylor grunt, I’m ordering the 961. As a diesel tech, I’ll find a daily use for it 🤣

    • @JoshsJettas
      @JoshsJettas 7 หลายเดือนก่อน +5

      I was also planning on going from 899 to the 900, but I think I’ll keep the 899 for “light work” and 961 for when you need it (farm/construction equip tech)

    • @Holdzie2G
      @Holdzie2G 7 หลายเดือนก่อน

      @@JoshsJettas I did exactly this, have had the 899 for years, bought the 900 but before using it caught wind of the 961 from the 'Project Ludicrous' video. Took the 900 back and put my name down for a 961 at my local. Got it this week, the 899 lost a battle with some LCA bolts on the racecar, they don't stand a chance now!

  • @Comm0ut
    @Comm0ut 7 หลายเดือนก่อน +14

    Doing salvage work and field repair of rusty equipment are where the big guns shine. If you do that stuff you know exactly why more power is better, and if you manage to wear out sockets you did more than enough work to buy replacements. Much love for my DCF900 (the prices just dropped on Amazon, gotta love new models displacing less-new!) but by Q4 2024 there should be something with sufficient megabeans to justify an addition.
    SIDE HANDLES (not short ones) would be a very good idea to control increasingly powerful tools. Ya can always unscrew them but having the option would be quite handy on both impacts and drills. It would be a safety upgrade as well and dirt cheap too.

  • @Parents_of_Twins
    @Parents_of_Twins 7 หลายเดือนก่อน +8

    It's like Crocodile Dundee with impacts. DeWalt is saying to Milwaukee "That's not an impact" and pulls out the 961 "This in an impact" Can't wait for the 3/4" drive version.

  • @PhillyFixed
    @PhillyFixed 7 หลายเดือนก่อน +109

    Now we just need Makita to come out of nowhere with an XGT model that can perform the same but somehow manage a sub-5.0 wrist-breaking score... I believe in you, Makita.

    • @steffendetrick
      @steffendetrick 7 หลายเดือนก่อน +21

      The Makita fanboy has entered the chat now we just need tools and stuff😂

    • @riba2233
      @riba2233 7 หลายเดือนก่อน +7

      Doesn't the xgt 3/4 already do that?

    • @PhillyFixed
      @PhillyFixed 7 หลายเดือนก่อน +6

      @@riba2233 not quite, per the rankings at the end.

    • @riba2233
      @riba2233 7 หลายเดือนก่อน +8

      @@PhillyFixed they have about the same max torque, similar price (although makita is much cheaper in the rest of the world), similar size and weight... In the end those are really small differences that get added up. Also makita was not tested with their best battery unlike DeWalt.

    • @tomaxsas
      @tomaxsas 7 หลายเดือนก่อน +6

      Yes, need provide TTC with that latest bl4040f

  • @TimeLapseRich
    @TimeLapseRich 7 หลายเดือนก่อน +5

    I've moved industrial bakery machinery that had 100's of 1 inch nuts on threaded rod, and 1000's of 3/4 inch bolts. If I had to do one of those projects again i'd be buying 2 to 4 of those and batteries to go all day.

  • @tjtobin86
    @tjtobin86 7 หลายเดือนก่อน +4

    YES!! I've wanted to see the dcf961 since you first talked about it!

  • @jaycarneygiants
    @jaycarneygiants 7 หลายเดือนก่อน +5

    Great work as always. I appreciate your explanation at the end of why you would or wouldn't want this impact. So many reviewers just gush over every product and with TTC I feel like we get not only an honest review but of course data to back up what you are saying.

  • @aaronneher4860
    @aaronneher4860 7 หลายเดือนก่อน +3

    I’ll never forget the look on my father in law’s face when he got his gen 1 Milwaukee HT. We stuck it on a lug that had fine threads and was painted over on his old tractor. Probably a 26mm lug nut and it broke loose in less than 3 seconds. Can’t imagine this thing cranking on something

  • @Scratch31337
    @Scratch31337 7 หลายเดือนก่อน +14

    Thanks for introducing another thing that almost nobody needs but everybody wants!

    • @TorqueTestChannel
      @TorqueTestChannel  7 หลายเดือนก่อน +11

      You just described half of my possessions

    • @Porty1119
      @Porty1119 7 หลายเดือนก่อน +1

      If I was still working on crusher plants, it would fall much closer to "need" for me!

    • @juanc5149
      @juanc5149 7 หลายเดือนก่อน +2

      Im buying this and I barely even use the 900.

  • @jokly1264
    @jokly1264 7 หลายเดือนก่อน +9

    15:23 The most likely reason those impacts couldn't remove the nut from that u bolt is because the long bolt acts like a torque stick. The bolt flexes and rebounds with each impact, which keeps the impact from making the incremental progress with each hit.
    I had the same thing happen on some rusty u-bolts I was taking off. I have the dcf899 and it would only loosen them just a little bit until it would stall. Once I went to loosen them with the ratchet I would estimate it took, at most, 100 ft lbs to rotate each nut what should have been well within the capability of the impact.

    • @TorqueTestChannel
      @TorqueTestChannel  7 หลายเดือนก่อน +4

      For sure, there's instances like that all over vehicles sometimes

    • @jokly1264
      @jokly1264 7 หลายเดือนก่อน +1

      @TorqueTestChannel there aren't that many I don't think...right? The only common, exceptionally long bolts I can think of are leaf spring bolts...and maybe truck bed bolts. What else can you think of?

    • @TorqueTestChannel
      @TorqueTestChannel  7 หลายเดือนก่อน +7

      @@jokly1264 A arm and upper/lower control arm through bolts. Any crank bolt operates this way, especially if the rotating assembly isn't stopped with a breaker bar or bolt. Even some rear pinions act like this when trying to remove a pinion nut, I've had the DCF900 do absolutely nothing to a pinion nut. Cylinder head bolts, especially on diesels. Also seeing the difference in difficulty removing an axle nut vs a German rear axle bolt.

    • @Comm0ut
      @Comm0ut 6 หลายเดือนก่อน

      For that sort of thing I use an epicyclic manual torque multipler. However it could be a one-hander if the nut could be manually preloaded with an INLINE ratchet and long bar to take up the slack then the impact applied to the assembly. Too bad I've not seen such a tool but it would be highly specialized. Like my big rig mechanic bro I don't hesitate to use a torch or 6" zip disc to snip sticking U-bolts (and shock absorber bolts on the NON-HYDRAULIC side of the shock). I learned in a 1970s salvage yard never to cut the fluid end of a shock unless you like fire up close by surprise.

  • @MrCaribe65
    @MrCaribe65 7 หลายเดือนก่อน +1

    What an awsome time to be into cordless impact wrenches. So many powerful choices.
    Thanks for the video. Always fun to watch.

  • @ultraspeed7625
    @ultraspeed7625 7 หลายเดือนก่อน +2

    WOW! What a showdown, the one we've been waiting for! Impressive numbers by all no doubt. That Dewalt DCF961 is calling my name, even if i still will be using my Milwaukee 2967-20 on the regular.
    Thanks for the great upload, keep up the good work TTC!

  • @RAD-RC
    @RAD-RC 7 หลายเดือนก่อน +7

    Awesome to see this review! have to get this over the 900 because the purpose you described was exactly what i need it for. I use my 12v 3/8s for everything but sometimes theres something more than the 250ftlbs it can deliver so having a one-stop "This mf is coming off or its getting melted off" tool is all I need.

  • @mayaswellbethewifesaccount7625
    @mayaswellbethewifesaccount7625 7 หลายเดือนก่อน +1

    I think you’re spot on when you say it stays in the bottom draw until all the other impacts can’t un-stuck something. I’ve experienced the exact same phenomena

  • @DON_TOOLS
    @DON_TOOLS 7 หลายเดือนก่อน +2

    Went dcf961 route and it’s a beast of an impact and this proves it💯

  • @emmettturner9452
    @emmettturner9452 7 หลายเดือนก่อน +5

    15:09 - That was exactly like me on my van earlier this year. Previous owner put a junkyard rim there after an accident and GROSSLY overtightened it. Broke TWO of my impacts before resorting to that WITH heat.

    • @emmettturner9452
      @emmettturner9452 7 หลายเดือนก่อน

      My DeWALT DCF899 already had a broken detent pin anvil so the first torque wrench that failed was the 1/2” Chicago Electric 92349. I bought it many years ago for removing a motorcycle countershaft sprocket using the bike’s own 12v battery and it’s only been used a couple times since on roadside tire changes. It’s one of those that builds up a ton of speed for each hit.
      After impotently banging away at the lug nuts for way too long it completely seized. The LED would still come on so it wasn’t the fuse. Definitely smelled like something had burned up.
      The second was a brand-new DeWALT Atomic 20V Max brushless impact driver with a brand-new Ryobi “impact rated” 1/2” socket adapter. Instantly snapped the adapter… like, maybe even the first hit. Perhaps that’s which so many bit sets for impact drivers leave out the 1/2” size. Since it was brand new I exchanged it but I don’t know what the 1/2” adapter will ever be useful for if it just snaps on the kinds of things you’d use a 1/2” impact on.
      Only after both of those failed did I resort to what you see at 15:09 and the lug nuts still weren’t budging… and I’m a big boi too. Ultimately I had to break out the torch and squelch repeatedly with penetrant, which worked, but neatly sheared off the threads on a few of the lugs and still required bouncing up and down on a breaker bar. The sheared threads looked like a perfectly formed spring that just fell right out of the damaged lug nuts. I couldn’t believe it was just grossly overtightened and not permanently rusted together.
      Since then I got a Craftsman CMCF940 and gave it to a friend once I repaired the DCF899 (badge variants of the exact same impact). After all, he’s the one who gave me this van after a tornado crushed my car so I definitely owe him.
      Using my DeWALT DCS438 cut off tool I turned the Chicago Electric 92349 blow molded case into a case for my friend’s CMCF940. With the same modifications it also fit my DCF899 since they were essentially twins.
      So now I’m sitting here with my newly-repaired decade-old DCF899 and seeing monsters like the DCF900, M18 2967, and DCF961. I doubt even my DCF899 could’ve handled that which might help me rationalize getting one of those. “Never again” will I precariously bounce on the breaker bar with all my weight and risk breaking my neck!

  • @rockenrooster
    @rockenrooster 7 หลายเดือนก่อน +4

    Dang..... That thing is a beast.
    I vote putting the Flex 6.0 stacked battery on it and doing a test run lol, that thing is insane!

  • @enthused7591
    @enthused7591 7 หลายเดือนก่อน +14

    Impressive. I'm just pumped that this means used DCF900s and 2767-20s will be cheeeeap now

    • @henrymarocchi7844
      @henrymarocchi7844 7 หลายเดือนก่อน +2

      I got a dcf900 kit from Lowe's on sale last week for 280$ with 5ah battery and charger and bag. Been great so far! May get even cheaper now though

    • @solomonshv
      @solomonshv 7 หลายเดือนก่อน +3

      DCF900 with 5ah has been on sale for $200 at Bomgaars for months now.

    • @Xv1p3rCr0
      @Xv1p3rCr0 6 หลายเดือนก่อน

      ​@@solomonshvThx man i actually bought one for $199 because of your comment ,had no clue what bomgaars is 😅

  • @laukc7085
    @laukc7085 7 หลายเดือนก่อน +18

    I just got the 2967, and it's a beast. But I still use the gen 2 mid torque for 95% of what I do at the shop just due to the size and weight. The DCF901 would sit in my toolbox for a rainy day use like my 3/4 XGT does.

  • @diegomurillo2194
    @diegomurillo2194 7 หลายเดือนก่อน +8

    Oh well, haven't seen the video yet but I knew they were waiting for Milwaukee Gen 3 so they could topple it.

    • @SuperSoldierStan
      @SuperSoldierStan 7 หลายเดือนก่อน +4

      Corporate Chess move 😂

  • @likeaboss882
    @likeaboss882 7 หลายเดือนก่อน +4

    I’ve had the dewalt 1/2 compact for about a year and that has done 99% of things on my truck for me. That being said, i have an 899 that needs retirement. I think this monster would fill those shoes well.

  • @ianphillips2443
    @ianphillips2443 7 หลายเดือนก่อน

    To start, love your output, the right balance of humor and fact!
    I switched from a "yellow, to red", in the form of a basic pre lithium and tired Dewalt, to an M18 Fuel drill kit with the 1/4 impact a couple of years ago, massive improvement, as you would expect.
    Then added the 4.5 grinder and Hacksawzall, both fantastic additions when mains power is restricted.
    Then, unless money is no object, you've no option but to stay with the "platform" that you have chosen.
    However, I don't see anything on the horizon that is going to convert me from my air powered 1/2 and 3/4 impacts.
    I work on a lot of older Land Rovers here in the UK, so access and power to weigh ratio is essential.
    For cost and versatility, I love my Milwaukee, but when I need to undo the stuff that has had an hard life, it's air all the way!

  • @czdejv21
    @czdejv21 7 หลายเดือนก่อน +2

    got it, love it, working in Truck service and own my own mobile service for Semitrucks, and it lot easier to grab this beast than moving car and dragging hoses for big 1" impact..hope dewalt will finally spit out the 3/4 and 1", bcs the 1/2 is over its socket limits, broke 2 snap-on 33mm sockets (cracked bottom to top) and few non branded...as always keep up to good work...

  • @DavidVlogz
    @DavidVlogz 6 หลายเดือนก่อน +1

    I will definitely be getting one I was waiting to see your next video thanks for letting me know which tool to choose

  • @rotorhead5000
    @rotorhead5000 7 หลายเดือนก่อน +1

    Your summary at the end really fit what my impressions about it were. Its very impressive, but its such a chonker i would hate to have to use it every day if I was working at a tire shop or something. With some mild tendinitis even my 2767 is kind of miserable to use sometimes when my elbow is acting up, has me kind of excited when its due for retirement so I can enjoy the weight savings of the 2967.

  • @Mike-pr8hx
    @Mike-pr8hx 7 หลายเดือนก่อน +1

    It's your channel and we enjoy the rambling on. 👍

  • @aaronkowalewski659
    @aaronkowalewski659 6 หลายเดือนก่อน +4

    That's insane that they can develop a high torque to have boost like that! I have the dcf900 and I couldn't be happier with it. It's made my hobby of working on my truck a breeze when I have any rusted bolts to take off! I can't imagine what the dcf 961 is like! Great channel and great video!

  • @FusionBoost2.0
    @FusionBoost2.0 7 หลายเดือนก่อน +5

    Its scary how strong that thing is haha Reminds me of fast and furious when Paul Walker hits the nitrous in his eclipse LOL

  • @dbiddle4
    @dbiddle4 6 หลายเดือนก่อน +3

    Hey TTC,
    Starting at 4:04 when you begin to describe the first test you’re about to do (the working torque test), you stated “all tools with their 5 amp-hour battery”, referring to the results displayed on the graph to immediately follow. But the torque value listed on the graph for the 2967 is 718 ft-lbs. Correct me If I’m wrong, but I believe you obtained that value with the XC 6.0 FORGE battery in your video on 10/6/2023, and NOT with the standard XC 5.0, therefore not comparing the results with the standard 5 amp-hour battery offering across the 3 models displayed. To further verify this, the 718 value was shown again when you upgraded the batteries of the 3 models, and ran the same test starting at 5:34. I believe the value obtained with the 2967 using the standard XC 5.0 was actually 646 ft-lbs and not 718 ft-lbs. Just an observation I thought I would share! Excellent channel you guys, great work!

  • @flubdorp
    @flubdorp 7 หลายเดือนก่อน +2

    its a good day to be a dewalts fan, thank u dad for choosing a good platform for me to keep adding to

  • @dougdunleavy8400
    @dougdunleavy8400 7 หลายเดือนก่อน +2

    I own a DCF900 and it's an animal, I won't be upgrading to the 961, however, my apprentice just got the 961 and MAN IT IS SICK! She's a chunker but my god is it an animal. If I didn't have a 900, I'd buy the 961. The extra weight can suck, but there's something manly about having that 961.

  • @Pavloook
    @Pavloook หลายเดือนก่อน

    I bought this last November, which was the soonest I could, and this thing hasn't struggled to undo anything I've thrown this at. I'm still in awe when this thing starts hammering away.

  • @mdavidson101
    @mdavidson101 7 หลายเดือนก่อน

    I'm impressed, I need an impact, will be picking one up closer to Christmas time.

  • @lukegaglio8007
    @lukegaglio8007 7 หลายเดือนก่อน +8

    I would love to see a "for science episode" where you run 3 high cca lead acid 6v batteries to some of these guns and see what they can do with essentially unlimited discharge potential (assuming the voltage drop doesn't negate any gains that could be achieved from higher currents)

    • @accordv6er
      @accordv6er 7 หลายเดือนก่อน +1

      Or a "re-corded" series. Using a tether with a lithium titanate power supply. Those things put out power like a capacitor nearly.

  • @Jako1987
    @Jako1987 7 หลายเดือนก่อน +2

    I am milwaukee guy but I'll replace my old 3/4 with this when available here.
    I'll use it rarely but "when you need it you really need it"

  • @ColLucky
    @ColLucky 7 หลายเดือนก่อน +1

    Excellent video. Great run-down.

  • @stifreak14
    @stifreak14 7 หลายเดือนก่อน

    I just got a 2967, and let me tell you, holding em both side by side, the 961 is a MONSTER. Im glad these brands are going at it like this. I cant help but wonder now, if Milwaukee will stick some gen 3 tech in a more 961 sized frame! Awesome stuff!

  • @davidsoutdooradventuresand6799
    @davidsoutdooradventuresand6799 6 หลายเดือนก่อน +6

    So in other words you're saying DeWalt is a better tool for the buck?

  • @tcantrell1993
    @tcantrell1993 5 หลายเดือนก่อน

    Love the channel TTC. I'm not sure if this is your niche, but I was thinking it may be cool if y'all could dyno test router motors. Thanks for the videos, keep em coming 👍

  • @ronaldbrosius7488
    @ronaldbrosius7488 7 หลายเดือนก่อน +2

    Time is money,, and this is exactly what I need!! I am a heavy equipment field mechanic, working on large earth moving equipment!!(Im Ordering right now, great video)

  • @jrivas2126
    @jrivas2126 7 หลายเดือนก่อน +2

    I would use an adapter 1/2”to 3/4”. Would rather damage a less expensive adapter than the socket. Would this work?

  • @TheFutureKingz
    @TheFutureKingz 7 หลายเดือนก่อน +2

    Finally, dewalt made a smart move by waiting.

  • @Shawn_the_Protogen
    @Shawn_the_Protogen 7 หลายเดือนก่อน +2

    Holy moly. I think I know what I'm getting for automotive work. I think Milwaukee is taking a back seat.

  • @siberx4
    @siberx4 7 หลายเดือนก่อน +7

    The best part of these massively increasing specs on impact wrenches is not that the regular consumer can now get a high torque that will let you change wheels on a gargantuan mining dump truck, but that you can do your normal day-to-day work with a much smaller, lighter compact impact that does what a big bulky high torque from a decade ago would.

  • @Toolaholic
    @Toolaholic 3 หลายเดือนก่อน

    Hey guys just want to say amazing channel, you put a lot of effort into videos and it shows. Well done

  • @fitch8363
    @fitch8363 7 หลายเดือนก่อน +1

    Very enjoyable video, as usual. Thank you.
    But, as you note, bigger is not always better when it comes to cordless impacts. I don't work on semis or big tractors, so with rare exceptions, my Gen 3 Milwaukee mid torque is all I need. I have a 2767, and had a few occasions when it was barely enough, and a few when it wasn't enough I used a 3' ICON breaker bar with a pipe on it plus heat (yeah, bog bolts with nuts really stuck - after I chipped off the rust with a chisel I was able to hammer on a size smaller socket). Truth be told, if I needed more than the 2767 often enough, I'd go to Harbor Freight and buy a big extended anvil 1" air wrench, some half inch hose and high flow couplers - they're hard to beat when it comes to getting lb-ft/$$..

  • @countryracer69
    @countryracer69 7 หลายเดือนก่อน +1

    SShould I buy this? Yes. The range in my shop varies greatly. My ARO 1" isn't getting it done cause its old. My last high torque was stolen. I have dewalt tools. This is what I need. Literally perfect for me.

  • @jnmc-vx4fw
    @jnmc-vx4fw 6 หลายเดือนก่อน +2

    Dewalt does not just next gen tools every year like red does…dewalt makes tools that outperform the competitors for years before they can catch up, and sometimes they still can’t.
    Flexvolt tools are 6-7 yrs old, came out first, and still outperform all tools ( except the recip) Milwaukee laughed and said you don’t need 60v tools , but never matched what they did either. Then they developed 72v tools not backwards compatible to beat dewalt. Then they developed 36v ( 2/18v ) tools to compete….
    As a Builder/ Framer I guarantee you nothing is better then Dewalt Flexvolt for Construction. And most of their 20v max tools equal or are better than any other company out there.

  • @realandrewhatfield
    @realandrewhatfield 7 หลายเดือนก่อน +2

    Beast mode! Now I want one with an LED or something that kicks in with VTECH... maybe a siren?! LOL Good stuff

  • @slingin_tires
    @slingin_tires 7 หลายเดือนก่อน

    Should be perfect for tightening down intake plenums!?
    Just got mine yesterday and 'speechless' is the best word that describes me! Way beyond what I ever thought cordless 1/2in. guns could do. But now they can. 💯

  • @mattkeating7446
    @mattkeating7446 7 หลายเดือนก่อน +2

    Us heavy truck guys in the rust belt are all extremely interested in all the big Boi power Dewalt and Milwaukee can find.

  • @hallowedmellon6235
    @hallowedmellon6235 7 หลายเดือนก่อน +2

    Thanks to my Mac dealer I have the dcf961 as my loaner while my dcf900 is getting repaired. Oh boy this things feels like it’s gonna break my torque stick and my wrist one handing this puppy is like putting on a show definitely a monster!!

    • @RavinderSingh-iv3sr
      @RavinderSingh-iv3sr 7 หลายเดือนก่อน

      I have a dcf 900 but may upgrade with my Mac dealer. Does the dcf961 size cause any clearance issues for you working around cars? I'm also considering the new Milwaukee for its smaller size and weight.

    • @hallowedmellon6235
      @hallowedmellon6235 7 หลายเดือนก่อน

      @@RavinderSingh-iv3sr honestly I don’t use it for to much I have a 3/8 and 1/2 mid torque I use as well, but when it comes to tough bolts it’s definitely something I’ll gravitate towards. Not the best for mobility in my opinion it’s really on there for stubborn bolts and that’s about it because of how heavy it is and how odd shaped the head is, it’s very top heavy

    • @RavinderSingh-iv3sr
      @RavinderSingh-iv3sr 7 หลายเดือนก่อน

      ​@hallowedmellon6235
      Thank you for your quick response. I have the dcf 850, 903, 923, 891 and all are excellent for certain jobs, used almost everday but sometimes the 900 just gets beaten by some stupid lug nuts or rusted bolts! My work colleagues Snapon 9050 just seems to perform better and is more compact. Malwakee maybe a better choice?

  • @bassnjeep6537
    @bassnjeep6537 หลายเดือนก่อน +1

    I work on 18 wheelers and recently upgraded from the DCF900 to this 961 and boy oh boy lemme tell you, thiss thingg is a monsteerrrrrr 🔥🔥🔥🔥🔥 thingg getss me out off jamsss when normally i have to heat bolts up too loose up, this thingg hass camee in clutchhh 🔥🔥🔥💪💪💪
    -just to add to itt, it blew off the water my coworker's 1inch milwaukee 🔥🔥💪💪

  • @aliancemd
    @aliancemd 7 หลายเดือนก่อน +5

    Needs some Makita anti-vibration love

  • @a1racer441
    @a1racer441 7 หลายเดือนก่อน +2

    The 900 I bough at the start of the year is already more then enough for me with the 6ah batteries I’m not removing crank bolts or anything. I use dewalt for work because they make some nice 1/4 impact drivers so I use them at home to keep battery buying easier. I’m not sure you can go wrong with red or yellow though these days both make crazy stuff.

  • @Apachefog
    @Apachefog 7 หลายเดือนก่อน +11

    I recently got the 1" pistol grip milwaukee and have been really happy with it. I didnt intend to take every semi wheel off with it but its just so much more convenient than searching the shop for one of the big air impacts and dragging out a hose. U-bolts are almost taylor made to defeat impacts, they just twist and spring back and the nut never moves.

    • @pflaffik
      @pflaffik 7 หลายเดือนก่อน +1

      Then the Makita XGT 3/4" is for you. So much cheaper than the 1" Milwaukee and can perform at max all the time with the cheapest battery (lightweight and agile in addition), consistently max performance from 4 bars down to 1. No need to run out and buy the newest battery and hope "maybe now it can do it" and the $2,000 Waukee fans spent on other high performance batteries is somehow always forgotten when it is time to point out how expensive the Makita is, nor the fact that Makita batteries perform as well after 10 years, adding to the savings. Milwaukee has by far the most expensive lineup in total cost, anyone denying it need heavier medication.

  • @Proton_Decay
    @Proton_Decay 7 หลายเดือนก่อน +1

    For milling out 1/2 inch sockets... just buy 1/2-3/4 adapters in bulk and adapt all your 3/4's down, until the 3/4 comes out? Or just have the tool truck keep replacing them?

  • @Joethetoolguy
    @Joethetoolguy 7 หลายเดือนก่อน +1

    Yellow is king again! Here you go 👑

  • @victorvarsanyi6702
    @victorvarsanyi6702 7 หลายเดือนก่อน +20

    I just can’t get over battery tools outperforming air tools. 😱

    • @TorqueTestChannel
      @TorqueTestChannel  7 หลายเดือนก่อน +13

      At the top end yes, at the bottom end you're not going to find 4" long cordless tools making the 3, 4, 500 ft-lbs air tools can.

    • @riba2233
      @riba2233 7 หลายเดือนก่อน +7

      ​@@TorqueTestChannelnot yet but you never know, tool progress looks really good at this rate :)

    • @Comm0ut
      @Comm0ut 7 หลายเดือนก่อน

      @@TorqueTestChannel Of course beans can be stored in many ways. My CO2 bean can works well (I run long hose to give it time to expand) and for shorter duration my high pressure nitrogen bean can is nice too. Hydraulic tools go FAR beyond pneumatics but they are not cheap. Cordless tools go where corded and pneumatics do not or are impractical so I solve it by owning all three (can't find an excuse to buy a hydraulic unit unless it turns up cheap at auction).

  • @anindividual3889
    @anindividual3889 7 หลายเดือนก่อน +6

    I like it, but honestly I will wait for the 3/4 drive model. I think we're reaching the limitations of what half inch stuff even needs to be or can be in terms of socket life.

    • @crusty5059
      @crusty5059 7 หลายเดือนก่อน +5

      yes this honestly should be the last increase in torque for 1/2 anvils all future models should just work on reducing size, vibration, and weight while keeping torque the same

    • @anindividual3889
      @anindividual3889 7 หลายเดือนก่อน

      I have both the older 899 dewalt high torque as well as the gen 2 milwaukee and honest both of them sit in the drawer in favor of the 1/2 inch milwaukee mid torque. The other's only come out when that mid torque can't break something loose and that's maybe just 10% of the time if that. They're all good tools, just kind of a dumbell.
      @@crusty5059

  • @YankeeCherokee
    @YankeeCherokee 7 หลายเดือนก่อน +1

    I love this channel. The absolute madlads at all these tool brands just going ham with these designs. All in the name of BEANS.

  • @Sam-in1sh
    @Sam-in1sh 7 หลายเดือนก่อน +5

    Dtech kicked in yo

  • @imtjnotu
    @imtjnotu 7 หลายเดือนก่อน +1

    i got one of these two weeks back mostly to remove Lugs on Newflyer busses. it works on 33mm nuts at 500ft/lbs

  • @Patrick-857
    @Patrick-857 7 หลายเดือนก่อน +2

    What I'm noticing, other than the bonkers power of the new Dewalt impacts, is they have really upgraded their internals and the plastic clamshell covers. They have always made rugged tools, but rough around the edges and prone to small failures.
    My workmates and I all have multiple DCF887 impact drivers, and despite online reviews showing them spewing smoke, these things are by far the most reliable and tough impacts in class from my experience. I have a lot of criticism for Dewalt, but apart from triggers getting glitchy which happens to all impacts I've seen, they just keep going. And we seriously abuse them. They get dropped, thrown, they drive so many big fasteners that they are too hot to touch, we use them to predrill an entire house lot of of 16mm thick fibre cement weatherboards on an almost weekly basis, they often drive large concrete bolts, and nobody I work with has had one die. Some of them are 6 or 7 years old and look absolutely terrible.
    I'm a big Makita fan and their impacts seem to die more often, and don't get me started on the Milwaukees, nothing red is reliable for some reason.

    • @jnmc-vx4fw
      @jnmc-vx4fw 6 หลายเดือนก่อน

      Absolutely right

  • @harleye1235
    @harleye1235 4 หลายเดือนก่อน +3

    I'm the only yellow supporter at my diesel shop, I gotta get this thing.

  • @bleach_drink_me
    @bleach_drink_me 7 หลายเดือนก่อน +2

    This is fantastic. Dewalt is trying to become my next cordless brand.

  • @joshuagauvin9026
    @joshuagauvin9026 6 หลายเดือนก่อน +1

    I own the 961 it's an absolute animal and use it regularly as a heavy equipment mechanic, it removes things that I used to have to get the 3/4 drive or 1 inch drive I can't recommend it it more, it's awesome

  • @jameslowe3792
    @jameslowe3792 7 หลายเดือนก่อน +6

    That thing is a beast, would make short work of a Honda crank bolt.

    • @mr2_mike
      @mr2_mike 7 หลายเดือนก่อน +7

      Vtec on Vtec battle.

    • @Whateva67
      @Whateva67 7 หลายเดือนก่อน +1

      Maybe 😅

  • @jamesfair9751
    @jamesfair9751 4 หลายเดือนก่อน +1

    What would happen if you switched the positive and negative wires on the motor ? Would it just run backwards to what you have the switch set for or could it possibly confuse it and put out more power being the switch is set to forward but the motor. running reverse

  • @09corvettezr1
    @09corvettezr1 7 หลายเดือนก่อน +1

    Will definitely be buying a “DCF964” in 3/4” drive when it comes out.

  • @Manu__R
    @Manu__R 7 หลายเดือนก่อน +15

    I hope that 1/2" anvil is covered under warranty, you're gonna need it

    • @alexmills1329
      @alexmills1329 7 หลายเดือนก่อน +3

      The anvil? What about the poor sockets being abused by that thing in 1/2” you’re going to be going through those things like candy with this level of power.

    • @juanc5149
      @juanc5149 7 หลายเดือนก่อน +2

      They made the anvil steel to be extra durable. The softer metal from your sockets on the other hand. Ya your socket rep is going to black list you eventually.

  • @aaronvantgeloof7407
    @aaronvantgeloof7407 7 หลายเดือนก่อน +1

    this made me soo happy im a dewalt guy

  • @jack504
    @jack504 7 หลายเดือนก่อน +1

    I wonder what the durability will be like, is it speeding up by increasing the motor speed or changing the gear ratio?
    Also want to see sone oversize oil rig gear like the Ingersoll Rand 588a1

  • @RabidBadger_
    @RabidBadger_ 7 หลายเดือนก่อน +2

    I would like to see how the XGT performs with the new high-performance 4Ah battery.

  • @axelleiva243
    @axelleiva243 7 หลายเดือนก่อน +2

    DCF961 for the WIN 🏆

  • @amzarnacht6710
    @amzarnacht6710 7 หลายเดือนก่อน +1

    Need to build a timer into this new Dewalt booster... at 9 seconds its delivered about all it's going to deliver, while the others need 15+ seconds to reach the same point. So you can stop and give your wrist a rest after 10 seconds vs. hanging on for maximum wrist wrenching with the rest.

  • @DerekFletcher1
    @DerekFletcher1 5 หลายเดือนก่อน

    dcf892 owner here. Could be more psyched to see this.

  • @youpigfacetv
    @youpigfacetv หลายเดือนก่อน +1

    DeWalt DCF9 is a true monster. Took out my Honda crank pulley bolt in just 3 seconds...

  • @jasonlee5317
    @jasonlee5317 2 หลายเดือนก่อน

    About to find out exactly how strong this dewalt is..got the bare tool in yesterday and I’m waiting for 2 new batteries to arrive on 4/10/24. My Milwaukee is stout but has an issue that needs repaired so I bought this. Let it begin!

  • @denisrhodes54
    @denisrhodes54 7 หลายเดือนก่อน

    would love to see what team yellow can do in the 1”+ arena. already using a big boy IR on house air with 3/4 chicago hose and a jack hammer to drive out the stubborn bolts

  • @johndeerekid167
    @johndeerekid167 7 หลายเดือนก่อน +4

    I'm interested in the reasoning behind the "VTEC" feature. Is it to save battery life, protect your wrists, stop you from immediately snapping off every bolt, or stop the massive amps from roasting the electronics? I'm guessing it has something to do with the last one, and probably protecting the battery.

    • @riba2233
      @riba2233 7 หลายเดือนก่อน +5

      "stop you from immediately snapping off every bolt" this most probably, so you have more control instead of just balls to the wall

  • @dickearthskeptic
    @dickearthskeptic 7 หลายเดือนก่อน +1

    Your channel is fantastic!

  • @GodsBattleAx
    @GodsBattleAx 7 หลายเดือนก่อน +1

    Dropped my jaw with the dcf900, my who face fell off with the 961. Keep going DeWALT!

  • @TheSidneySmith
    @TheSidneySmith 7 หลายเดือนก่อน +3

    I wonder if the 15 second test would get a higher result if you released the trigger and restarted at the 8 second point. Does the trigger being released immediately reset the vtec yo timer?

  • @Syncopia
    @Syncopia หลายเดือนก่อน

    I like how dewalt hasn't bothered to fix the jitters and kickback and instead decided to just give it more beans. I kinda respect it.