Just an update, I ended up swapping the old seat belts off the original seats and replacing them for 2 reasons, being a big boy I wanted the seatbelt looser than 1 inch and once I pulled the the dodge seat belt clip the bracket holding it to the tray was razor thin! I’m assuming it’s that way because dodge thought only children would be in these seats. Idk 🤷♂️, I’d highly recommend swapping the the original ones . Thanks for watching!!!
Man I love when people don't follow what everyone else has done. Cavi or sunfire seats look cheap. The is dope 👌 Thanks for investing the time and presenting this🤘
@@madmike_9343 before I cut them out to replace them, nothing changed on them so both still work. Just keep the button latches and original seatbelts from the s10 intact.
I'm also modifying my 2.2 I'm waiting for motor and transmission. Thinking about doing a swap for both (if I can the trans). But rn is all cosmetics and amenities
I like my 4.3/4sod automatic but the old sbc is bad ass too. If I was into serious power I'd go sbc bc I'm old school.for regular driving my 4.3 is enough for me. It's as strong as an old 305. Don't go 305. @@colesmith4694
How comfy are these seats? 2nd row seats in any vehicle are notoriously terrible. However they HAVE to be an upgrade to the rotten falling apart seats we all have.
It made a huge difference for me, even though I have a exhaust system that is essentially “straight pipe”, it cut down the droning, road noise and fuel pump noise. I also have a 2018 Silverado and it drives me crazy how loud the road noise is! I plan to put it into the Silverado too.
I’m about to do this, just gotta find the seats I like. Also, did that center console come in your truck? Mine has the 60/40 bench seats so I’m trying to find center consoles like that to fill in the center
Mine came out without issue. I live in south Texas though. I’d try hitting it once a day with PB blaster for a week if I were you, the try to remove it
Apply heat, the factory uses loctite (a lot of it) on seat and seat belt hardware. About 3-5 minutes with a butane torch and they'll come out like butter.
I’m in the process in converting mine into a floor shift instead of column. Just to make it more bad ass with the cammed 5.3 and a floor shifter in place.
@@justinnelson1 oh I painted that one, just call around junkyards, they are getting really hard to find I’ve considered make some out of fiberglass, a lot of people ask about them.. s10s are becoming a classic
@@madmike_9343 I've been to a few junkyards lol, just didn't know that those were the primary place. It's crazy that I can't find those online though, every time I look them up I see ram parts.
I’m 5’0 or at least the last time I went to the doc I was anyways the seats in my blazer are small as hell and can’t see over the dash my mom used to drive it a lot and she’s shorter than me don’t know how she sees but
Just an update, I ended up swapping the old seat belts off the original seats and replacing them for 2 reasons, being a big boy I wanted the seatbelt looser than 1 inch and once I pulled the the dodge seat belt clip the bracket holding it to the tray was razor thin! I’m assuming it’s that way because dodge thought only children would be in these seats. Idk 🤷♂️, I’d highly recommend swapping the the original ones . Thanks for watching!!!
Instablaster
What year
@@mannirubalcava1724 2017
Music to loud, can't hear yaa ,try using magnets to hold the plates 👍
Man I love when people don't follow what everyone else has done.
Cavi or sunfire seats look cheap.
The is dope 👌
Thanks for investing the time and presenting this🤘
That turned out sick. Shopping for upgrades on my ZR2.
Mfw that seat dropped!!! Damn guy, that was awesome!
Keep the videos coming bro love it great work and creativity
Good choice for a swap you saved alot of money because it would cost alot to get the stock S10 seats restored and reupholstered
Good work bud. This is what American Hotrodding is all about 😉
The music's too loud I can't hear what you're saying
That's sick man I like it
Subbed went junking yesterday and picked up some seats for the daily.
That’s what’s up!
What year were your seats out of im not sure if I missed that part lol
I forgot to mention it, they were pull outs of a 2018 dodge caravan
Very nice!
Soon as my zr2 is back from the shop I'm doing this. Lol my quick fix for the time being was switching the passenger seat with the driver seat
Ha nice, how do y’all buckle them seat belts?
@@madmike_9343 before I cut them out to replace them, nothing changed on them so both still work.
Just keep the button latches and original seatbelts from the s10 intact.
@@silkybenjamin4208 got ya.
This is awesome. Great idea. Just picked up my project 03 s10. I'm on motor now (stock 2.2). I'm going to look for these. Thanks man. Got the sub
Thanks man!
I'm also modifying my 2.2 I'm waiting for motor and transmission. Thinking about doing a swap for both (if I can the trans). But rn is all cosmetics and amenities
I like my 4.3/4sod automatic but the old sbc is bad ass too. If I was into serious power I'd go sbc bc I'm old school.for regular driving my 4.3 is enough for me. It's as strong as an old 305. Don't go 305. @@colesmith4694
got a 96 blazer your my inspiration on these s10 models really wanna do this to my blazer
I want my just like it
Man that's awesome !! You're S10 is sweet my friend!! I love the extra arm rests dose the outside arrest hit the door at all when shut?
Nope, it’s really nice to incline with the arm rest are down
How comfy are these seats? 2nd row seats in any vehicle are notoriously terrible. However they HAVE to be an upgrade to the rotten falling apart seats we all have.
Dude I love them I’m a heavy guy and no complaints.
They look nice I'm putting a bench seat on my 02 S10
Next time turn down the s h I try music
Love your video
Thanks buddy
What year and model did the seats come out thank you by the very good video
2018 dodge caravan 2nd row seats
Off topic, but I seen your vid of the sound deadening, how did it help the road noise and overall ride quality?
It made a huge difference for me, even though I have a exhaust system that is essentially “straight pipe”, it cut down the droning, road noise and fuel pump noise. I also have a 2018 Silverado and it drives me crazy how loud the road noise is! I plan to put it into the Silverado too.
Mines got a Chevrolet racing style wheel in it lol
That was exactly what I needed to know thank you I will be trying this. Do you think it is possible to use the front seats instead?
You can make anything fit with a welder 🤪
Doing a 95 s10. .replace with a set of 2007 350x seats.
Nice!
I’m about to do this, just gotta find the seats I like. Also, did that center console come in your truck? Mine has the 60/40 bench seats so I’m trying to find center consoles like that to fill in the center
Right on! Yes the center console did come with this truck pretty common on 98+ I believe. I’m actually planning to do a center console swap soon
@@madmike_9343 Depending on how soon you plan on swapping the center console I'd love to buy it off you.
@@ChrisDavis-ji2xs where do u live at?
Where did you get the chair? I want one. I have Chevy s19 1999 do you think the chair will fit?
i put chrsler pacifica seats in my 1998 s10 my seats are almost like yours i love mine
Just looked them up, they look mint!
13:50 fukn mint!
How did you get the T50 bolt out? They tend to strip for me as I live unfortunately in PA with rust and then I’m fuxked
Mine came out without issue. I live in south Texas though. I’d try hitting it once a day with PB blaster for a week if I were you, the try to remove it
Apply heat, the factory uses loctite (a lot of it) on seat and seat belt hardware. About 3-5 minutes with a butane torch and they'll come out like butter.
why would you put music over you trying to explain what you are doing? especially going over measurements and what not?
Idk bad edit and I can’t change itb
You should turn the music up
Ha… ha…
What year is the caravan?
2017
Why wouldn’t you use the 4 studs and 2 bolt holes already in place for each seat?
I did , the track bracket is different
You drilled new holes in the stock van tracks, I have those same seats.
@@p.b.sHUNTING ohhh yeah it’s was so I could set the seat further back
Wish I could find a buckets to bench conversion
Sometimes you just make it
Do they recline?
Yes not all the way back like normal but back enough to take a nap lol
Where did you get the custom door panels i wanna get some for mine
I made them forever ago
Good content but the music was very distracting (irritatingly too loud).
Roger that, still figuring out how to edit
I’ll be honest the music really made it hard to watch I like the video but turn it down or off can’t even hear what your trying to say
Thanks for the feedback, I started a different video editor and I wasn’t sure how loud the music was next time will be better!
What year it's the dodge plzz
How much did u pay for those seats what year caravan they came off???
I think I paid like 300 bucks and 2017
OMG, the music. Difficult to watch the video with that! I want to see the swap tho... But for real!
I know dude I’m gonna dig up the archives and see about fixing the audio
Good video. But the music got annoying
I know I’m sorry
What kinda seat are those I have @ 2000 Chevy s10. I wanna get them
2018 dodge caravan seats second row
Thanks for the seat idea!! Looking to do something with mine. You have LILREDD i have LILBLUU. 🤟🏾stepside gang!!
I was wondering how far does the back rest recline if any?
I’m in the process in converting mine into a floor shift instead of column. Just to make it more bad ass with the cammed 5.3 and a floor shifter in place.
Your vids make me want to work on my 2000 s10. Too fuckin hot down here in Florida though
I feel you man, I’m in south Texas so I know your pain
@@madmike_9343 what part of Texas lol I’ll pay you to do my seats like that haha 😆
@@MrIkillgamers I’m out of Baytown , there is a guy in north Houston that sells them on CL
@@madmike_9343 yo I’m in Baytown too !!
@@MrIkillgamers well pick up them seats and hit me up
Where did you find that red dash panel piece? I can't find even normal colored ones anywhere lmao
Which one?
@@madmike_9343 the big one that wraps around the gauge cluster, radio, and air vents?
@@justinnelson1 oh I painted that one, just call around junkyards, they are getting really hard to find I’ve considered make some out of fiberglass, a lot of people ask about them.. s10s are becoming a classic
@@madmike_9343 I've been to a few junkyards lol, just didn't know that those were the primary place. It's crazy that I can't find those online though, every time I look them up I see ram parts.
@@justinnelson1 you might let lucky in Houston, I see them randomly. It’s annoying to see them busted up
FYI. Your music is too loud for this video.
What year caravan??
2017
Will this work for 02 s10 ?
Yup same year as my truck
I’m 5’0 or at least the last time I went to the doc I was anyways the seats in my blazer are small as hell and can’t see over the dash my mom used to drive it a lot and she’s shorter than me don’t know how she sees but
Well I know the old seats cave in at the bottom, get some cushions on them!
@@madmike_9343 yea
We need a video on ur door panels
Yea, I did those years ago, I want to redo them, future video I promise
@@madmike_9343 u have A ig or fb ?
@@tannerhederson4067 sure don’t, I’ve been told to get one but I’m not sure
@@madmike_9343 u should do video on ur door panels just covering wat u did
😎
😉💺
Can't deal with the background music.
@@gailtaylor1636 I’ll do a reload
Why play music in the background while trying to show people something can't barley here you
Music was way too annoying to get much out of this video. Would be nice to repost without it.
Does anyone know if you can put a bench seat in 88 s10?
I don’t see why not just take the measurements that I took on the video and compared to what you have
The music is to loud
Yea I messed up cans change it unless I repost
Lol homeless depot
Terrible filming terrible soundtrack with music
You must have the COVID virus on the account of no taste .
No one said you had to be here bro.. but I guess he’s doing something right to start building up the haters.
@@madmike_9343 rekt lol