2004 - 2010 Toyota Sienna Radio Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ม.ค. 2018
  • Parts linked in the description below!
    For an updated version of this install, click here: • 2004 - 2010 Toyota Sie...
    Watch a full tutorial as a 2008 Toyota Sienna will have a brand new Pioneer AVH-280BT Bluetooth Radio installed. This video also includes dash trim and stereo removal, wiring, installation, and testing.
    This video applies to Toyota Sienna models for years 2004, 2005, 2006, 2007, 2008, 2009 and 2010.
    For the Toyota Sienna Back up camera install, click here:
    • 2004 - 2010 Toyota Sie...
    For the Pioneer Stereo unboxing, click here:
    • Pioneer AVH-280BT Doub...
    If you have any questions, leave a comment below! Be sure to like and subscribe!
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    *Pioneer AVH-X280BT (Discontinued)
    ---Recommended Radio: amzn.to/365sQY4
    *American International TOYK984 Dash Kit: amzn.to/3eVsEPZ
    *Crux SWRTY-61S Wiring Harness Adapter: amzn.to/3iqHcK7
    ---If you have the factory JBL Sound system, use the Crux SWRTY-61J: amzn.to/2T1yw2m
    *Male 3.5mm to Female RCA Adapter: amzn.to/3wakBW4
    *USB / AUX Flush Mount Adapter: amzn.to/2SYXEGS
    *Pioneer Parking Brake MicroBypass: ebay.us/RVf61w
    Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases
  • ยานยนต์และพาหนะ

ความคิดเห็น • 107

  • @ProvoBeastAudio
    @ProvoBeastAudio  3 ปีที่แล้ว +5

    Parts linked in the description of the video!
    For an updated version of this video, click here: th-cam.com/video/3TmtqGdPW8I/w-d-xo.html

  • @peterlansdale1793
    @peterlansdale1793 3 ปีที่แล้ว +5

    Despite your best efforts to make it look easy....I'm pretty sure this is gonna take all day.

  • @vshanmug2
    @vshanmug2 3 ปีที่แล้ว +17

    Good useful video overall. But, connections using CRUX kit for retaining Steering Wheel Controls is where I am stuck at. Your video skips through the specific connections from stereo harness to the interface and then to car wires. It would be helpful if you had slowed down a bit when explaining SWC connections.

    • @emmaleepowellart5238
      @emmaleepowellart5238 ปีที่แล้ว

      Also stuck on the swc control. Can’t figure out where to connect the red wire for power

  • @matthewweidemann8155
    @matthewweidemann8155 2 ปีที่แล้ว

    Thank you for being proactive about shortening up the video to the greatest degree possible!

  • @bigccoltonme
    @bigccoltonme 4 ปีที่แล้ว +11

    And at this point I saved your video for my future install. Thank you at this point.

    • @bigccoltonme
      @bigccoltonme 4 ปีที่แล้ว

      Swc won't work on my android atoto a6 pro. Crux not working properly

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 ปีที่แล้ว

      Crux usually doens't interface will with android units.

    • @mikemcandrew6606
      @mikemcandrew6606 ปีที่แล้ว

      Agree...atoto a6 is not swc friendly. Im upgrading to atoto s8 premium to get swc and wireless Android auto

  • @Man2Media
    @Man2Media 9 หลายเดือนก่อน

    Crazy...I have this same radio...and this was so awesome! I purchased the Sienna from a friend but i want to do so much more to it. Thank you for this video!!!

  • @mom4moms793
    @mom4moms793 3 ปีที่แล้ว

    This is a great video!!! One on my 12volt sockets is not working so this could be a great upgrade, I don’t see myself needing the aux input but it’s great you showed all options!!!

  • @ExperimentalMechanic
    @ExperimentalMechanic 6 ปีที่แล้ว +3

    thank you bro i did it a plus i add A OVERHEAD TV SYSTEM AND EVERTHING LOOKS GOOD.

  • @timfarnsworth3731
    @timfarnsworth3731 6 ปีที่แล้ว +2

    Great video, perfect for what I am looking at doing !!

  • @loudtowncar
    @loudtowncar 4 ปีที่แล้ว +2

    SAVING THIS. We just have the basic stereo in our this will make it sound better for sure.

    • @loudtowncar
      @loudtowncar 2 ปีที่แล้ว

      Just te watched this video! Putting in a headunit tonight haha. Only took me 2 years… kinda excited to give our space ship some better sound!

  • @adventureoflinkmk2
    @adventureoflinkmk2 4 ปีที่แล้ว +1

    That said... Thanks for showing us how to pop off the panel where the gear shifter goes, I was gonna mount a fast charger in one of those holes

  • @mmytacist
    @mmytacist ปีที่แล้ว

    Very helpful! Need to get the parking brake bypass switch to finish. Would be helpful to watch as you fish the lines through the car, particularly that mic cable. A coat hangar would have helped!

  • @Justsoyallknow
    @Justsoyallknow 2 ปีที่แล้ว

    Thanks for the video sir.

  • @luisbruno9415
    @luisbruno9415 4 ปีที่แล้ว

    Nice video bro..👍 thanks

  • @constanceatkinson969
    @constanceatkinson969 6 ปีที่แล้ว +1

    thank you for this i have this car and i want to update my van. Thank you again!!

  • @natepacker4556
    @natepacker4556 5 ปีที่แล้ว

    Do you have a link to how you turned one of your USB ports to a regular charger port?
    Edit: just watched that part again. It's clear to me now. Thanks!

  • @VT7Years
    @VT7Years 5 ปีที่แล้ว +1

    Can you show where & how you tied in the very long (green) parking brake wire.

  • @stevenmeddles4369
    @stevenmeddles4369 5 ปีที่แล้ว

    Will an aftermarket head unit like this one accept audio from the rear seat entertainment system (DVD) player in the back? normally you switch the factory system to AUX to get DVD audio through the speakers. I have a 2004 XLE with a jbl stereo (No nav)

  • @richardeaster2094
    @richardeaster2094 ปีที่แล้ว

    Thank you for an educational video, but I wanted to ask for clarification on a couple of wire couplings. I have a 2007 Toyota Sienna and purchased a Pioneer DMH-342 EX and attempting to install myself. The blue/white wire from the radio is coupled with the blue/white wire from the Crux SWRTY-61S module and the blue wire from the micro bypass? The same process for the black wire from all three? You may have covered it, but I wanted to make sure I did it correctly. Thank you

  • @danniriley1246
    @danniriley1246 6 ปีที่แล้ว +7

    Does the new radio work with the factory dvd player?

  • @NoRevengeNeeded
    @NoRevengeNeeded 6 ปีที่แล้ว +3

    I was with you until you skipped some steps 😋. I dunno how to strip wires sir lol. My van is doom 😂

  • @khaledafg1
    @khaledafg1 5 ปีที่แล้ว

    I changed on mine today but with standard wiring kit just for speakers and power but buttons on streering dont work how we have to set the crux and my new radio has one wire it says steering wheel remote input

  • @vikramjayanth2289
    @vikramjayanth2289 4 ปีที่แล้ว

    nice. so clear. Is there someone who can install in my sienna 2005.

  • @cruiz3597
    @cruiz3597 5 ปีที่แล้ว +2

    Which colors are the steering wheel controls colors ?

  • @claudewhitlow6640
    @claudewhitlow6640 4 ปีที่แล้ว +2

    What color wires to retain the steering wheel

  • @AP-oj7fl
    @AP-oj7fl 4 ปีที่แล้ว

    I went with a iData T01 harness. The wiring colors on the T01 harness do not match up with the factory harness. And, there is one T01 connector with more wires than the corresponding connector on the factory harness. Is this right?

  • @alanmuch23
    @alanmuch23 2 ปีที่แล้ว

    a question my friend how did you connect the amplifier to that stereo screen

  • @JohnDoe-ig1yw
    @JohnDoe-ig1yw ปีที่แล้ว

    My factory harness has 4 plugs. I am trying to install the same pioneer CD player. Will your set up work for my van even though I got that extra plug?

  • @RamsesTorresLifevantageIndDist
    @RamsesTorresLifevantageIndDist 6 ปีที่แล้ว +2

    Finally, could the GPS function on my android phone show on the screen?

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว

      Not this model specifically, but you can depending on how you connect your phone. If you purchase a radio with a video or HDMI input, you can mirror your phone with the radio to view your phone's screen there. Alternatively, you can also purchase an Android auto or Apple CarPlay enabled radio to use your phone's navigation directly on the radio.

  • @sarahcline8488
    @sarahcline8488 5 ปีที่แล้ว +1

    Anyone know what installation kits work for a 05?? And how much is the kit? Also does this work with Alpine?

  • @JoshCartman
    @JoshCartman 4 ปีที่แล้ว

    I left a comment yesterday and deleted it after catching my own mistake. I noticed your Sienna has an AUX, so I looked at mine and as it turns out, I don't have an AUX input. In place of it, is a Engine immobilizer/theft deterrent
    system indicator light. Towards the bottom of the dash above the cup holder, it looks the same, as I notice some have options for seat warmers. Mine does not. I've seen other installs of AUX ports using this panel area, just by drilling a hole and feeding it through.
    How/where can I install an aux port on my van? Can the unlabeled black oval cut out be used as such? If so, how would I go about connecting it? I believe the owners manual diagram labels this as Item #6, as a Power Outlet Main Switch.

  • @jojolozano4868
    @jojolozano4868 6 ปีที่แล้ว +1

    solder and shrink sleeves are the way to go

  • @mikenguyen4853
    @mikenguyen4853 4 ปีที่แล้ว

    Can You Installation on Toyota 4 Runner 07 . Thank

  • @josephnattar9796
    @josephnattar9796 5 ปีที่แล้ว

    How much does it cost to install the Pioneer on 2009 Toyota Sienna

  • @stevenmeddles4369
    @stevenmeddles4369 4 ปีที่แล้ว +2

    Does this work on a 2004 jbl/dvd sienna?

  • @jaminoes_
    @jaminoes_ 5 ปีที่แล้ว +1

    Any of these compatible with Android Auto ?

  • @RamsesTorresLifevantageIndDist
    @RamsesTorresLifevantageIndDist 6 ปีที่แล้ว

    Do you need the Crux SWRTY-61S Wiring Harness Adapter if your Sienna does not have steering wheel controls? Also, do you need the microbypass for the Pioneer AVH-290BT?

    • @landshass2849
      @landshass2849 6 ปีที่แล้ว +1

      No, if do not have steering wheel control in your Sienna (CE trim) you don't need the CRUX harness. You can go with the basic harness, just make sure it serves the AUX function if the new stereo does not have one, unless if you're not interested in AUX jack.

  • @peterthehusky8165
    @peterthehusky8165 4 ปีที่แล้ว +1

    I have questions though. How do you connect the car’s antenna cable to the pioneer to make the radio work? How do you connect the parking wire? Also after I installed it, there seems to be no sound coming from the mid dash speaker. I have the 2004 sienna with JBL without an AUX. It’s so weird.

  • @javieribarra1217
    @javieribarra1217 3 ปีที่แล้ว +1

    Mine has JBL & entertainment system... any advice?

  • @leepuckettmusic883
    @leepuckettmusic883 2 ปีที่แล้ว

    You didn’t really describe what the original sienna plugs looked like and how you connected them to the new radio. I have 4 modules in the dash and have no idea how to connect to the new radio

  • @mosesokonkwo2911
    @mosesokonkwo2911 2 ปีที่แล้ว

    Please I need a full video on how to install the screen stereo and the backup camera in sienna, thanks

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      There are videos already for this install. Links in description.

    • @mosesokonkwo2911
      @mosesokonkwo2911 2 ปีที่แล้ว

      @@ProvoBeastAudio please link me

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      @@mosesokonkwo2911 Links in description of this video.

  • @mikediep489
    @mikediep489 3 ปีที่แล้ว +1

    what is model number of your pioneer radio (item Dimensions)

  • @jldixon66
    @jldixon66 6 ปีที่แล้ว

    Why mount the bluetooth overhead, instead of through a drilled hole on the trim kit?

    • @danfranzen9690
      @danfranzen9690 2 ปีที่แล้ว

      Cause that would look like crap lol

  • @VT7Years
    @VT7Years 5 ปีที่แล้ว

    Do we really need a new dash kit or can we use the factory dash kit off the old head unit?

    • @StarmanDX
      @StarmanDX 5 ปีที่แล้ว

      a new dash kit is only like $20 (not including wiring harnesses), I don't think you can use the one from the old head unit

  • @blitzegron4848
    @blitzegron4848 2 ปีที่แล้ว +1

    Hello Provo, does this also work with the Sienna Limited with a JBL system?

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      Yes, just purchase the appropriate harness (all linked in description)

  • @lukevanginkel7380
    @lukevanginkel7380 3 ปีที่แล้ว

    What is the average price for this?

  • @FiatMortem
    @FiatMortem 4 ปีที่แล้ว

    Did you step down the 12V to 5V on your charging USB port? 12V straight in will smoke many USB devices expecting 5V.

  • @danrusin4757
    @danrusin4757 2 ปีที่แล้ว

    hi. can you share the link for how to connect a backup camera too? thanks

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 ปีที่แล้ว

      The link is in the description of the video.

  • @DavidLee-ey8yu
    @DavidLee-ey8yu 4 ปีที่แล้ว

    I installed the microbypass just as you showed, but the volume controls on the steering wheel are not working? Any idea. I ordered all the same parts you did except I am using an AVH-1550NEX.

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 ปีที่แล้ว

      make sure you have the steering wheel cable plugged into the WR input on the back of the radio. Also, check to see if you have the crux module setup correctly

    • @DavidLee-ey8yu
      @DavidLee-ey8yu 4 ปีที่แล้ว

      I didn’t have the SWC plugged into the WR input. Once I did that it worked perfectly! Thanks!

  • @SpecialKT15
    @SpecialKT15 ปีที่แล้ว

    Does this radio have apple car play?

  • @rrh5399
    @rrh5399 3 ปีที่แล้ว

    Ey we’re are you located I need you do that job on my car 🚘

  • @khaledafg1
    @khaledafg1 5 ปีที่แล้ว +2

    for what did you use the microbypass?

  • @JoshCartman
    @JoshCartman 4 ปีที่แล้ว

    BTW I kinda lost you on the part where you were installing the USB ports. You didn't really show what all you did. Wires were connected from the start but where'd they go? And is your one cigarette lighter still serving as a cigarette lighter?

    • @mr.p9882
      @mr.p9882 3 ปีที่แล้ว

      Yeah...he's not very good at answering the people who help make him money on youtube, right?

  • @LeonAllanDavis
    @LeonAllanDavis 5 ปีที่แล้ว +2

    Ebay has the Pioneer for $130. The other stuff would cost less than $50. Probably $30.
    Pay a shop $100 to install it...
    Less than $300 ain't bad...
    Of course the best thing to do is buy the Sienna XLE Limited.
    It has the killer JBL sound system. 11 speakers.

  • @Oscar-lo4fh
    @Oscar-lo4fh 6 ปีที่แล้ว

    What's the mico by pass for? And dose it come with that wiring kit?

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว

      It bypass the video restriction on the radio while in motion and gains access to certain settings in the menus. No, you have to purchase it separately.

    • @Oscar-lo4fh
      @Oscar-lo4fh 6 ปีที่แล้ว

      @@ProvoBeastAudio thanks so that's for just video then because im going to be installing a single din

  • @mykevin81
    @mykevin81 5 ปีที่แล้ว

    How do you retain AUX input with the crux interface?

  • @bhumane8642
    @bhumane8642 4 ปีที่แล้ว

    so do you lose the CD player with this? Is it possible to do something like this and either keep the CD player or have a CD player?

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 ปีที่แล้ว +1

      This radio includes a CD player.

    • @bhumane8642
      @bhumane8642 4 ปีที่แล้ว

      @@ProvoBeastAudio is this radio available to buy online? Maybe you have a link somewhere I haven't seen. I as thinking of just installing a 12 disc CD changer with it, would that work? Thanks

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 ปีที่แล้ว +1

      @@bhumane8642 Disc Changes are becoming more and more outdated. There really isn't a simple route for a change install. As for the radio, search amazon. This is a few years old, so you can probably find a newer model.

  • @MrArieldubon
    @MrArieldubon 5 ปีที่แล้ว

    What size are the wire connectors? 22-18?

    • @alcocer190
      @alcocer190 5 ปีที่แล้ว

      Where did you get the parts you used for the instalation

  • @MihaelaRo
    @MihaelaRo 6 ปีที่แล้ว

    What is the microbyass for?

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว

      It allows you to access certain pioneer settings and have video playback while in motion.

  • @jonathanjimena6204
    @jonathanjimena6204 6 ปีที่แล้ว

    How much all the cost for the parts and the radio?

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว +1

      Price will vary on parts availability and your location. All parts used are listed in the description and you can search those part numbers in amazon. Prices will also be a bit inflated if purchased from local shops as well.

  • @adventureoflinkmk2
    @adventureoflinkmk2 4 ปีที่แล้ว +1

    0:14 hey you totally stole that sound clip off Eric O. (South Main Auto) 😂

  • @brewitt1247
    @brewitt1247 ปีที่แล้ว

    Would a 9" stereo fit in an 04 Toyota sienna?

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว +1

      Kit fits a double or single din radio, so as long as the chassis on that floating 9” is that chassis size, sure.

    • @brewitt1247
      @brewitt1247 ปีที่แล้ว

      @@ProvoBeastAudio thank you for the reply 🙏

  • @raquelreid8637
    @raquelreid8637 4 ปีที่แล้ว

    About how long did this take

  • @rrh5399
    @rrh5399 3 ปีที่แล้ว

    Ey can you give me a list what I need I have the stereo same one like you. Same car what cable I need make me I list please

    • @ProvoBeastAudio
      @ProvoBeastAudio  3 ปีที่แล้ว +1

      All parts listed in description

    • @rrh5399
      @rrh5399 3 ปีที่แล้ว

      Thanks man

  • @carbmwzhpe46zhp49
    @carbmwzhpe46zhp49 ปีที่แล้ว

    This system has gps ?

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว

      Nope. Brand name Onboard GPS units are quite pricy. If you want GPS, I suggest a unit with CarPlay or android auto.

  • @imranshah-ll1wk
    @imranshah-ll1wk 3 ปีที่แล้ว

    Why would you merry all the colors 😂

  • @outoftime788
    @outoftime788 3 ปีที่แล้ว

    watever hapened to sonic they stop making videos