Acura TSX (CU2) Yonaka Catback Exhaust x PLM Header (Cold start, Flybys and Revs)

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ก.ย. 2024
  • I think it's safe to say I'm the first one to make a video on this exhaust set up (being first doesn't matter anyways).
    My only complaints:
    - There is a buzziness sound from 3k - 4k rpm under heavy load. (4:46) represents that the best.
    - There is a rasp/buzziness sound when downshifting at a high rpm @ (6:29)
    ^Both of these complaints happened after the exhaust broke in^
    - The exhaust sits a bit lower than the OEM exhaust and one of the flanges is a bit more prone to scrapping if you're lowered.
    No issues with the installation.
    All in all, I give the exhaust set up a 7/10
    Hope this video helps you decide on the getting this exhaust set up or not.

ความคิดเห็น • 26

  • @Bate0788
    @Bate0788 3 หลายเดือนก่อน +2

    Fire vid bro need more cu2 videos not a lot of people on here with videos like these about cu2s 🔥

    • @_kanes
      @_kanes  3 หลายเดือนก่อน

      For sure bro, I always got my cu2 people

  • @KarasouTengu
    @KarasouTengu 3 หลายเดือนก่อน +1

    I got a 2013 Sportwagen, and I am so glad the exhausts fit the same so I can get proper sound clips lol. Thanks for this. I was looking into getting this setup.

    • @_kanes
      @_kanes  3 หลายเดือนก่อน

      Glad I was able to help

    • @chrisb15679
      @chrisb15679 2 หลายเดือนก่อน

      They bolt right on but the tips come up short and burn the bumper. Ask How I know 😂. Wagon bumper is just over an inch longer than the sedan.

  • @SBBUK
    @SBBUK 2 หลายเดือนก่อน +1

    Nice video. I'm being jerked around with my Tsudo order (being told August now...) so I may cancel it and order this Yonaka. Undecided currently.

    • @_kanes
      @_kanes  2 หลายเดือนก่อน

      If you think the Tsudo sounds better, I'd wait

  • @CU2Shawn
    @CU2Shawn 3 หลายเดือนก่อน

    Sounds great bro nice video

    • @_kanes
      @_kanes  3 หลายเดือนก่อน

      Appreciate it

  • @aldoperez9535
    @aldoperez9535 3 หลายเดือนก่อน +1

    That buzziness can go away if you cut the yonaka rear mufflers and do a muffler delete.

    • @_kanes
      @_kanes  3 หลายเดือนก่อน +1

      May experiment with that

  • @_kanes
    @_kanes  3 หลายเดือนก่อน

    Read the description if you want to know my final thoughts. 🛌

  • @arrowisa3492
    @arrowisa3492 หลายเดือนก่อน

    How much better is your 0-60 after the headers and tune? Finally got my Yonaka and love the sound but the car is still slow af lol

    • @_kanes
      @_kanes  หลายเดือนก่อน +1

      I couldn't tell you. I've never actually timed a 0-60. Just know that you can hang with the 9th gen Si now.

  • @arrowisa3492
    @arrowisa3492 3 หลายเดือนก่อน +1

    Any improvement on performance with the Yonaka?

    • @_kanes
      @_kanes  3 หลายเดือนก่อน +3

      With the car not tuned, not really. The car is tuned now, and it's a night and day difference.

    • @arrowisa3492
      @arrowisa3492 3 หลายเดือนก่อน

      Hell yeah nice! I’ve been riding for 3 years with a res delete because that’s how I bought my 2013, so hopefully there’s more of a difference from that than from stock

  • @asstronnn
    @asstronnn 3 วันที่ผ่านมา

    im looking to getting this exhaust but that buzz kinda messes with me

    • @_kanes
      @_kanes  3 วันที่ผ่านมา

      @@asstronnn I installed a vibrant resonator after I made this video and it fixed 90% of the buzzyness/rasp. Cost me an extra $300 bucks to get it installed though 😕. Will have to a make a video on that soon.

    • @asstronnn
      @asstronnn 2 วันที่ผ่านมา

      @@_kanes what resonator did you buy?

    • @_kanes
      @_kanes  2 วันที่ผ่านมา

      @@asstronnn vibrant

  • @aarong63
    @aarong63 3 หลายเดือนก่อน

    im curious to hear what skunk 2 dp and yonaka cat back sounds like on these cars. i have rv6 dp thats straight piped and the rasp is killing me.
    nice to hear this combo on the car

    • @_kanes
      @_kanes  3 หลายเดือนก่อน

      I would think the skunk2 would make it sound more rowdy. Doubt someone will make a video on that anytime soon though.

    • @SBBUK
      @SBBUK 2 หลายเดือนก่อน

      Lots of people have reported the skunk2 downpipe cracking so I would avoid it

    • @stephenskater90000
      @stephenskater90000 2 หลายเดือนก่อน

      @@SBBUK I’ve had my skunk 2 downpipe on my 09 accord for the past two years no problem and I live in ny . Holds up fine . Just picked up a 09 Tsx 6 speed thinking about grabbing the Yonaka catback and pairing it with the skunk 2 alpha downpipe I have

    • @chrisb15679
      @chrisb15679 2 หลายเดือนก่อน +1

      Run a "branch" resonator after the downpipe it helps with cabin drone and rasp. Synapse engineering makes a good one.