2007 Chevy Tahoe / Silverado Stabilitrak Traction Control warning MUST WATCH part issue
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- The replacement part from all of the part stores will not work. They are all selling STANDARD SWS24. It will not work and GM no longer sell the original part. ACDelco 19418403 works but no retailers computers have it as a replacement.
There should be a lawsuit on these car makers for all the b.s they put us through. All of these unnecessary sensors can have a major impact on a car
CAN'T EMPHASIZE ENOUGH THANK YOU FOR GOING THRU ALL THIS AND POSTING THE RESOLUTION, THIS SHOULD HAVE MORE LIKES TO BE THE FIRST RESULT AND SAVE EVERY ONE A TON OF GARBAGE SEARCH RESULTS
ROCKAUTO sells the correct AC Delco part for these vehicles!
I tried looking and can't find it in rockauto.
Do they sell good quality parts?
@@Zoroaster4 they sell many different brands from budget brands to higher quality OEM stuff. AC Delco, Bosch, Mopar, FoMoCo, Motorcraft, Wix, etc
Bought my STANDARD brand at oriellys. Ran out to check after your vid. They gave me SWS131 and the tang matched your original broken 2007 tang orientation. I went ahead with the swap and it worked great. Thanks for having this up so we can catch these faults before we get in trouble. Now if I could only find pins and bushings for my crawler!
Where do I begin... first off Sir, for your first video you chose a great subject!
Many people(including myself) have done the same exact thing, going to the dealership, getting the wrong parts/runaround from all the parts stores, online research by cross referencing part numbers , considering 6pin vs 8pin fitment options. TH-cam has several videos that lightly touch on the subject, but your video damn near covers everything you need to know! I said all that to say this, great job.
My 2007 Suburban and I thank you.
THANKS FOR VIDEO. I'm looking at changing right now. My Traction control, stabilitrak both lights on. Also my brake light. Hope this works
So the 8 pin sensor will work for the 6 pin connector?
yes
MUST READ!!!! Just cam across this bulletin. You may not even have to change the part!!!! f01.justanswer.com/res02l3r/378f9a96-9bf7-4d43-b23f-8d90348b45f9_c0710.pdf
Would this work on a 2008 GMC Sierra 1500 crew cab? I bought part number ACDelco 20910871 and it fits but I still get stabilitrac/traction control error. And the original part from my truck, the middle piece spins and the ACdelco part I purchased does not spin..its secured in place...and it is an 8 pin and my original was a 6 pin.
Great video!! Thank you for posting this!!
My 07 Escalade with 210,000 miles was always Binging and chiming Stabilitrak reduced power, I found after months of buying and doing many things in the end it was the negative cable power sensor. I purchased the entire ground cable with sensor. Drove over one year and 15 thousand miles later not one light or sound...
Items tried with no success Brake light switch no luck two days later comes back, Steer wheel angle sensor no luck. Cleaned every ground connection on the frame there is two hard basterds up front passenger side still no luck. Truck underneath looks like the day it was built a Las Vegas vehicle, I even added two new grounds no luck I went so far as having the trucks computer looked at still same crap. I read every person findings is different. With what I know and did by replacing both Positive and negative cables with power sensor $160 bucks money well spent. I even purchased a new battery that did nothing.
Where did you get them??
Thanks for posting, glad you figured it out!!!!
video failed to explain how vehicle drove with a bad angel steering censer? and how it drove with new steering censer ? try again?
I have a 2011 gmc sierra with the same code, would this work ?
Thanks so much! Actually had that standard in my cart, when I watched this video. GOD bless!!
Just saved me big headache wow thank you
I’ll be trying this soon!
Thank you very much.
You're the man for putting this together 👌
The part for my truck its discontinued. I found one on Ebay for $400.00. Thats crazy.
Running into the same issue for my 2007 Escalade. Thanks so much for the help and providing the reset procedure!!!! Big help!
havin the same problem hope it works for me too
Will this stop the back and forth jerk and stop the rpm needle from rising?🤔
I need to know as well!!!
when your light came on, did the truck start running rough? or just lights on the dash?
O'Reilly auto parts employees some smart parts guys for sure. Here in dayton we have a guy that works at the hub O'Reilly's and he literally is called"hard to find Gab", because he can find your part and he knows parts that cross over just in his head... Really smart guy
A lot of these parts stores guys don't give a damn bout customers only there for a check and know nothing about cars. I've actually been told by a guy one time at an Advanced auto that they are not really allowed to give advice about your vehicle problems cause they're not certified auto technicians and the company can be held liable, its like mcds workers that never grilled a burger in their lives but hey they get hired anyway 🙄
Took your advice & BAMM!!
Great explanation...
hello, what car did you replace this part on?. and how did the connector matchup?.thanks
I have a 2007 gmc Yukon and I’m having similar issues. Would that part fit my truck as well ?
On my 2006 Trailblazer, I replaced it with a part from Amazon, but it didn't fix the problem either.
You gotta be kidding me i just busted my ass putting a replacement in fml
Didn't work on 07 Tahoe, now it shows my traction control and stabilitrak if off when before it showed it needed service
Did You ever find out what it was
Yes. I finally found a mechanic that would look into it and not just guess random things. He replaced all the speed sensors and reset everything and it's been fine since
Bill! You're the Man!! thank you.
I could not find this part anywhere!
I ordered the ACDELCO and BAM! it worked!
You saved me a lot of money.
Keep the videos coming thanks gain!
hi will my name is tito and i view our video and i looking to try out your tip thank you for your tip , i will keep you update
I know I'm late watching this but does anyone know if this will fit 2008 gmc Yukon.
So the 8 pin works with the 6 pin ??? Because I can’t find 6 pin anywhere
So once I buy the part how do I install it?
you remove the steering intermediate shaft and unbolt the steering column slightly from its mounting position so you can slide the column forward to be able to pop the old off. it doesn't just slide off, it is designed to only slide easily one direction.
0:06
0:06
I have this issue now to ..2013 suburban the lights came after I did a complete twin turbo ls and 6L90 trans swap...I'm running 1200 hp in 4 wheel drive
I did everything suggested. Part fit like a charm and all. But the code is not clearing. The moment I touch the steering wheel the code is coming back on.
Hey so I have a 2008 Tahoe Hybrid , would this work for that ?
How do I go from a 6 pin to an 8 pin. Do I have to make modifications?
Good morning....were you lights CONSTANTLY on...........I have an INTERMITTENT traction control light ONLY when TURNING............replaced wheel speed sensors, abs module, upper control arms (thinking the angle was causing it-leveling kit was installed).........this and the ABS PUMP are the only things left..........someone PLEASE reply with THE answer to my NIGHTMARE
f01.justanswer.com/dcraig1000/b70996a7-6191-4136-a857-de9775086d92_eee.pdf
Look at this bulletin. Maybe it’s a short in the wires.
I had this problem traction light came on and check engine light blinking on ...if this don’t work change your spark plugs
Thanks So Much
Fixed my problem 2008 Escalade ESV
Thanks cause I’m about to go get it today
I salute you my brother thank you for a great video
Great job on the video Sir. You mentioned this newer part will work on a range of different year vehicles. I have a 2006 Chevy Tahoe, and I may have the same problem! Can you or is there a way to confirm?
where i can order one i need it asap plz and great video tho
Dealers stink
Do exactly what he says to calibrate that sensor after you install it because it does work I used a doorman sensor instead of the AC Delco
After you start the car and the code comes back up on all the time do what he said turn the car off disconnect the battery reconnect the battery turn the key on turn the wheel to the right hold it for 5 seconds turn the wheel back all the way to the left for 5 seconds turn it back to the middle position it in the middle by itself then turn the key off and the code is gone forever
Thankyou
I just bought 07 Avalanche and the same sensor is blinking on dash
Hopefully this helps thankyou
Do you think this same attempt will work for an 08 escalade ext with the same discontinued sensor??? I bought a position sensor for 2014 escalade. I need that same luck. Reply please!
Thanks man, I really appreciate the info. I’m going to give this a try on my Suburban. I think it will help. I’ll keep you posted.
By chance did this help out at all?
Same.....
Thank you so much...I'll give it a go. Appreciate you 🙏🏾
Great Video
Thanks for explaining the pin I installed one on an 06 avalanche part from rockauto, but I never saw any instructions on the pin , but do I pull the pin before or after I disconnect the battery , by the way I am driving with the pin in, lol thanks for any info.
Hi everyone so if this is a 6 pin original and the new one part #19418403 is 8 pin how will the new one Connect to my 2007 Silverado?
it worked for me. 07 chevy ltz
the 6 pin will connect to the 8 pin on model 19418403
@@hectordelgado1027 hi what will your truck do when the light turn on ?
@@mateoort4187 nothing. It doesn’t affect the performance but the message is annoying.
Thank you so much you have helped me more than anyone I think I can fix mine now
Did you use a 8 pin on yours?
Thank you William very much
Great information to know. Thank you!
this video is really good man, thank you. the foot work helped save me alot of headaches here. thank you bud
Thank you so much honestly.!
Thank for letting us know. 🙏
Wow thank you so much
Same for an 08 Silverado 1500??
Man im having same issue..i think they changed the part number again..i think its 1915008..by the way you looked up
Aaron hines guy video to help you replace the part ?
Sws131
Where did you buy yours from?
Thank younfor sharing
Job well done thanks.
How do you go about plugging it in tho?. If it's an 8 pin and the connector is 6 pin. I haven't taken it apart since I don't have the part yet cause of this.
The connectors are the same. It’s an 8 pin connector but only 6 wires. 14+ have all 8 wires in the connector.
So apparently they came out with a third design, part 19118404. Went to the dealer today and he asked which one I need, the 403 or 404. So now I wonder if this new design supersedes the other one or if they are completely different. I have a 2010 2500 HD.
I just came across this... Connector may only need cleaning. autoworksmn.com/2015/07/adams-service-tip-service-stabilitrak-message/
Great story great video. You have a new subscriber bud. One question though, would this part work on a 2011 Yukon as well????
yes
07-13 1500s Tahoe's, Silverado's, Yukon's and Sierras, literally everything from the front seats forward are identical inside and out, same suspension and everything, hope that helps, if you have any questions holler at me on facebook, names tyler bass, im out of fort walton beach fl
I had the same problem, I just pulled the fuses and no problems now. Dealer already pulled a fuse relating to the suspension system, vehicle wouldn't shut off. My electronic ride is screwed up so this has what it came down to. 2008 Escalade
What fuses
Don’t mind me saying, but please always remove the ground battery cable first, not the live one. Note, you can’t short the ground cable to any surrounding ground surface near the battery, and so, no sparks, etc. Just for safety’s sake. Good video, very informative! Thanks.
I seen you have to calibrate the steering wheel sensor with a car scanner
I broke the clock spring on mine. Now I can't honk at the cows 😔
you bought it online ? or store?
All you have to do is slide that part on the shaft and turn it until it lines up. It’s not the wrong tang or whatever the heck you called it. I just replaced one on my truck today it looked exactly like the Amazon one I slid it on the shaft turned it until it lined up and snapped it in works like a champ.
You are wrong two different parts Great video
Gracias !!
Thank you for sharing the information
Will this work on a 2007 Silverado 1500 ? New body
Have the same question same truck same issue 2007 Silverado new body. Did you guys know if this works for silverado??
Thank you so much
Thank you Sir!!!!!
Oh my God do you talk too much just get to the job
Great info!
Thanks brother I have same year Tahoe
Did it work for you?
Just got mine I will keep you guys posted 2007 Chevy avalanche
What happened? How does the connector work with the 8-pin?
So I'm wondering which part you got the six of the eight pin and where you got it at and if you are able to install it and get it to work so the stability track traction control was resolved?
So where’s the update ???
Hello. is the connector the same?
I bought the gm part and installed it didn't work even tried to have it centered but that didn't work ended up getting one from a junkyard installed it 4 months ago and no more problems
Hello William,
When you had issues, were both ABS and Stabilitrack lights on? At under 2MPH did ABS engage?
This is my condition on a 2007 GMT-360 with 5.3l engine. I have a nice scanner and all wheel bearings are reporting correctly....but under 2MPH ABS pump engages.
NOTE: I also understand the MOST common failure is front ABS sensors being "rust jacked" and fail. Replaced both bearings and signal is clear on all four corners.
Any reply from ANYONE would be apprciatred. ABS module responding but only under 2MPH.
Mr. P
replace your rear left and right speed sensors, cause the issue you're having could be anything, could be speed sensors, could be steering position sensor on the column, could be the clock spring, could be a handful of different sensors, I had that issue with my truck also, its like my brakes would lock up for like 4-6 secs and then it wouldn't do it again until I shut the truck off and let it cool down like over night, and then it would do it again, very odd, but I changed my clock spring, rear sensors, and it went away, I'm about to do the steering sensor because none of my shit will go off, the stability track, traction control, service brakes soon, all those lights and messages are on and its by far annoying as fuck, lol
@@Tyler_Bass850
Hello Tyler,
Certainly appreciate your response and YES I am aggravated with the dash MIL's and readings across the info area.
I watched some other videos and now will check ALL fuses. One video referenced a trailer related issue that caused a blown fuse to ABS.
On my vehicle it is consistent and repeatable from low speed stops (ABS engages as if I'm on ice)
Normally just a front wheel bearing sensor (have done many times), but I am getting good readings through my service tool.
GRRR and thank you again for the input!
Mr. P
Why would this have to do with traction control? I have the service traction/stabilitrak light on the dash. Wasn’t sure if someone can explain what the wheel position sensor does in comparison to the traction control
It’s away to get people to bring there vehicles to the dealership is my guess, many sensors or parts going bad can cause the trac stab cont and abs lights to come on. If anything messes up or even if you have a miss fire will turn off abs trac control and stability trac. It sucks abs is a pain in the ass!
I use the dorman ones all the time, no issues
Fix it again Tony...😢