How to Replace Steering Wheel Position Sensor 2007-2014 Cadillac Escalade
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2022
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/366/B/SteeringWheels...
This video shows you how to install a steering wheel position sensor on your 2007-2014 Cadillac Escalade.
This process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oQQ/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oQQ/1AXAA00013
• 10mm Wrench 1aau.to/onx/1AXAA00010
• 13mm Wrench 1aau.to/onx/1AXAA00010
• 15mm Wrench 1aau.to/onx/1AXAA00010
• 10mm Socket 1aau.to/oJJ/1AXAA00017
• 15mm Socket 1aau.to/oQo/1AXAA00015
• Trim Tool Set 1aau.to/oqd/1AXXX00006
• Pliers
• T25 Socket 1aau.to/ojg/1AXAA00008
• Ratchet 1aau.to/oUi/1AXAA00016
• Socket Extensions 1aau.to/oQo/1AXAA00015
• Torque Wrench 1aau.to/oAc/1AXAA00044
• Wire Ties
• Pick 1aau.to/ojH/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: • Cadillac Escalade 2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
Once again a TRQ video has saved me so much time and money, or in this case my girlfriend. Only took 1.5 hours and was no where near as difficult as I was expecting thanks to this video. No more stabilitrak nor traction control lights on dash. Still wish things were as easy as they were on the GMT800s.
I just installed a steering wheel position sensor on my 2014 suburban LTZ with guidance from this video, and it was not nearly as bad as I was expecting.
Great Instructions. I followed these for 2014 Escalade Premium . Spot On. Thank You!
Excellent video! Great camera work, clearly explained, very thorough. I'm sure that I will be able to do this replacement after watching this video. One thing that will make it even easier - I won't be wearing any gloves. :-)
I think I’ll be going to my local shop for this one great video though…very informative
What is the indication that this sensor requires replacement?
Looks insanely overly complicated for no reason
I wish I knew why but these little crackling noises or the noise of taking the tape off or the sound of your gloves drives me crazy 🤦🏻 thanks for the video though you helped me figure out my problem
Same process for the newer body 2014?
Great video bro!
Great video made it easy to replace the steering angle sensor. Thanks
Thanks!! Super easy on 2015 Cadillac ESV but a few messages popped up and my rear camera lines aren’t working. I think the system needs to be calibrated. How can I achieve this?
Too the shop it goes
I really like how you Demonstrate how to replace the Sterninwheel position sensor. I am having that problem myself I wish that you leave in Charlotte Nc and work on my escalade. You are a Professional at what you do. How much would something like that will cost at a good Mechanic shop ballpark Figure just Curious
My 13 yukon xl denali has been pulling to the left. Everything's on point. I dont know if this is the issue or not. Spent sp much money searching for the issue with no solution.
Did anyone get c0460 -00 steering position sensor code!?
Great video! Just completed my replacement 😊
I have replace my steering angle sensor and reset the code and still light keep turning on when i drive 10mph. Code is c0455 do you have any idea why its causing this? I have an 2004 chevy express 3500
Cuánto cuesta cambiar el señor junto con la mano de obra