I've got a K8 1000 that I've had for 6 years, you might be interested to see how it compares to yours as I've done some modifications that you're tempted by. One of the biggest differences between new bikes is the gearing. Stock they are geared to do 101mph in 1st, which may be why you're finding it a bit flat. Mine is the following spec: - Arrow cans and decat pipe - Cresent/Micron headers - R&R remap 173rwhp 81ft lbs - Ohlins TTX shock - Ohlins steering damper - Kais fork cartridges - HM plus quickshifter - Brembo RCS M/C - Brembo radial clutch M/C - R6 monoblock calipers - Brembo discs - -1+2 gearing (I think, can't remember what I ordered now) It's a completely different bike now than it was stock. Also in regards to flickability, the 190/50/17 rear is a tyre no manufacturer uses, and stepping up to a 190/55/17 will make it turn in quicker with a slightly taller sidewall and should help flickability too. Either way, you can't go wrong with a K8 IMO!! Keep it up
My 1000 k7 Spec: • Set of forged magnesium alloy discs Marchesini • Carbon air ducts, hager, pad on the pendulum and frame, under the tank, footrests, made to order in RSE • Yoshimura dual exhaust • Extreme Tech Rear shock absorber • Set of monoblock front brake calipers Brembo M4 • Set of floating front brake discs Galfer • Brembo RCS 19 Corsa Corta front brake machine • Rizoma driver and passenger footrests • Set of sliders and LSL weights • HealTech X-TRE ignition delay shutdown unit • Galfer Reinforced Hose Kit • DID ZVM-X G&G Chain • Zero Gravity Racing Double Bubble Windscreen • K&N Zero Resistance Filter • Sunstar 45 Rear star + every little thing
@@LambChopRides brake judder.. silicon eeeerverywhere... brake clean.. eeeeeverything especially the pads now.. that silicon crap will cook on when it ages to go opaque... its horrible crap
Unbelievable that a dealer would sell a bike with 10 year old tyres on. I guess they can’t be worried about getting negative feedback. Looking forward to the vid series. 👍🏻
@@Bow-to-the-absurd doesn't it just. I looked at a bike online a while ago and it didn't show much damage in the "detail" shots. But then the close up video showed the detail bits slowly, then whizzed right passed some obvious panel damage, so I enquired for close up shots of areas and provided screenshots of the video. All they did was send me a link to the page I'd already seen. I asked them again, explaining again that I can see panel damage vaguely as they flew passed it pretending it wasn't there but I wanted to know the extent of the damage before I travelled and they didn't even respond. I knew I was gonna be buying in a fixer upper, but if they can't be honest about damage and try to hide obvious stuff, then what else are they hiding!? I'd now never ever touch a bike from there ever.
Chops I’ve gone back to an older bike form newer ones ie R1, mt10.. I sold them and got myself a 2014 fireblade, it is what it is I use it for pure fun on a sunny day the throw it in the garage at the end of the day and don’t worry about it.. clean it put fuel in it and just enjoy it. Simple motorcycling but as much fun as you can have on the roads in the south east of England 😎
I had a 2008 Gixer, the all black one. Bought it new and I sold it last year with 38,000klms on it. It had a full Yoshimura system, ECU flash, black screen. I never had it on track day but some of our very quiet, long straight roads I hit 296kph on it and 1100rpm shy of redline. I sold when I hit 63yrs old as I can't bend like a pretzel to fit on it. After I sold it, about 2months later, I bought a Royal Enfield Continental GT. Fun bike but no long distance bike, I have a HD Street Glide Special for that. So for my 64th birthday I bought, brand new a Suzuki GSX-S1000F. Pretty much the same feeling bike just sit upright a bit more. Oh on your Gixer pay close attention to the fork seals. I had to replace both. No brake problems though
@@Coldestaevadoit I did as well. I got it as I couldn't wait till the GT got here in Oz, not due till June or July. I think I the GSXR for $14,999 and the F for $200 more including on road costs.
Come on Chops! We're the same age and have had a very similar biking history. Don't go all soft on us and keep moaning about the lack of a down-blipper, rev-match yourself and enjoy the interaction with the bike (and don't become down-skilled into the process! ;) :D ) I do like a QS for up-shifts, but want to do the rev-matching down-shifts still myself! :) Good review, shows just how little of the electronics suite goes towards enjoyment and usability of the bike, if you know how to ride.... Obviously, electronics make you faster on track, but unless you're racing, and pushing that hard, who really cares? :)
Even bikes in the sub 11-grand territory these days have transmissions and linkage so good, downshifts can be mostly instant and seamless. Just steady the throttle with barely any engine load, fan the clutch with a quick squish and that shifter drops at the toe seamless, engine jumps instantly to the lower gear RPM and you're all back with the clutch released and ready to either engine brake or blast off. Get a feel for this method under varying engine loads and you can be cruising at highway speed in top gear, in a couple seconds simply BLIP BLIP BLIP (down three gears in less time it takes to say "three gears" without any unsettling the chassis or smoking the clutch whatsoever) and WHACK the throttle off into the sunset with solid power. A clutch is a wear item, just like tires and brake pads. Don't be afraid to slip or fan it a tad, you don't need full-off disengagement, a big upset in power, a big lurch in chassis, a big gap in traction, followed by a slipping to match engine RPM to change a gear.
Nice one Chop's, glad to see the GSXR is all you wanted it to be... Really looking forward to the RD500LC & RG500 rides outs as will because they are my dream bikes too....!!
Like it ! Maybe £500 might get it up to date ? New rubber, discs, engine mapping, power mod ! It's not that far beyond what £20k+ will get you today ! Good stuff thanks for sharing
LOL Nothing wrong with that bike compared to today's. Lots of people still prefer something without the electronics. As far as what to call it: Gixxer 1000. That's how it's known in the streets. I'm not really a Suzuki fan, but when someone says they have a Gixxer 1000 I'm always happy to see one.
If you can, dyno compare this with the new one. There would be timing retarding on the first few gears so get the plug for that for more low/midrange in 1, 2, 3. Go a lithium battery and single muffler to lose easy weight.
You will not regret riding the RG500 Chopsy, I had a G reg 89 plate that I had in black, red and white, I regret selling it to the day, despite now having an S1000RR, I still miss it, crazy but true, the power delivery, the smell of full synthetic 2 stoke was intoxicating and those 2 upper and 2 under pipes from the square 4 smoking on start up were immense and very very satisfying ......... sounds like an awesome series mate, looking forward to it
In regards to the midrange, the k7-8 gsxr ecu stock has timing retarder in all the lower gears, If you decat and then get the ecu flashed you could have that sorted out.
Having owned my all black k7 thou for the past 5 years, I can say without a doubt, I don't need any other bike, this bike has it all, power, handling, looks and grace, I've recently ditched the twin arrows for an M4 streetslayer exhaust, and noticed a definite difference in the power delivery now that horrible cat has gone, my next things are a pc5, a brembo or hel master cylinder, and some new tyres, then it will be even better, enjoy the new ride chops 👍
My first bike was a GSX-R600 K8 so looking forward to this! I always wanted the 1000 as the 600 isn’t a great road bike, it’s too flat until at least 8k but I loved the bike and always thought the 1000 would be amazing although these days I ride a S1000RR.
For a older bike I think that it looks better than some of these modern machines for sure. I've always had a soft spot for the GSXR from way back in the day as Suzuki have always had competitive solid machines ......even though they haven't been up there with their development as of late......they are still legendary. Great review again Chops......can't wait to see what you've got planned for it. 👍😊
Any casual passer by who didn't know bikes would think that a brand new bike. The slight paint coating and marks you point out are teensy grumbles. Seriously, what a beaut! I been looking at similar year MV Augusta F4's, and, like this, most of them are in immaculate condition for their age. But, I never considered a GSXr, so am watching this with much interest.
A very pragmatic first ride review, can hear it in your voice. Some bikes blow you away as soon as you set off on them and others grow on you :). Hopefully with some tweaking you'll get the wow-factor!
Keep,the twin cans… looks awesome and no problems with MOT, police or noise on track. Spend time and money on the suspension and brakes plus the gear emulator and power commander to open it up a bit.
I made a Lamb Chop thingie and bought myself a used bike, a R1-16. It's been on it's side but after rebuilding it, ...can hardly wait until the snow will disappear. Living in Sweden.🥶
Had one of these since new, probably be the last new vehicle I will ever buy, so figured it was worth keeping. Over the years I have added a flat bar conversion (dodgy wrists), full Arrow system, PCV, 1 down on the front sprocket and 2 up on the back plus a taller 55 rear tyre...plus a speedo healer. I love it and it's plenty fast enough for what I need. Oh, and 'Analog' is probably the best description rather than Classic or Retro ;)
I owned a new k7 thou and modded it to death and the best mods were swapping the forks with k tech internals .fitting a WP rear race shock. Full yoshi exhaust system. Velocity stacks and pc5 yamaha R1 front calipers (huge diffrence in performance) braided brake lines ... one of my fav bikes I've ever owned !! I have a vid of it on TH-cam with a silly loud exhaust before I fitted the yoshi system and i fitted galfer wavy discs front and rear and rear sets and a diffrent cam in the throttle and lots of carbon fibre 👍
There is a sweet spot with bikes around this time, 2004-8, the ZX10 and GSXR were light, good looking, powerful… afterwards they got uglier and heavier.
Had me a K5 and just loved it, low kms and still had the stock pipe which was fine by me, quiet around town and really howled out country. the only big mod i made was to put a Brembo brake master cylinder and braided brake lines and she was good to go.oh i also had the suspension serviced, new oil and seals and i was a happy camper cant wait for the rest of the series Chops, Love that generation of bikes, keep up the good work mate
Love this old bike series! It was either K5 or Gen 1 ZX-10R, both great bikes I just prefer the looks of the ZX and it has more sentimental value since my first bike with the original Ninja 900, the bike that started it all. With that said the '86 GSXR1100 has a special place in my heart :-)
I had that problem with brakes before. And fixed by cleaning and copper greasing the pins which hold pads, They was dry so it drag pads on and of when start braking and stop that if you put more pressure to the brake liver. Great to see some older bikes on Your channel.
Have covered 100.000 km with exactly the same bike. Decat, akra single silencer made it more nimble. Best mod was drop a tooth on the front sprocket. Gave much more midrange for 20 € ! Had at least 4 warped front discs, common problem never solved. Breaking probably the weakest area of the bike. Bullet proof. Only a crash with a suv killed it at 130000 km. Still miss it.
STRIP FONT AND REAR SUSPENSION AND GREASE EVERYTHING BEFORE THE SUN COMES OUT!!..! also while your at it check and clean all of the electrical conectors to avoid the green death!! That being said, ¬ I've had a k6 from new, ¬ oz wheels ohlins, 3 teeth up on the back, pipe, filter , power comander/quick shifter, with a custom map, and a set of helibars , I tried a few later models but other than a bit more top end they didn't offer anything more, except price, weight and nowadays complexity ( I can still service myne ), I appreciate how things have moved on in the tech department and as fantastic as it all is, how can you justify £20.000 + to go faster round a track. the old k6 has more than enough to enjoy a spirited road ride, without worrying too much if you bin it, , the only code it's ever thrown up in 15 years is the exhaust valve bollox ! all reasons why I still love it, !!. be careful chops ¬ you might end up loving yours!..
So that's New tyres ,discs , rear shock, fork internals, headstock bearings. Power commander, link pipe, front sprocket, quick shifter, quick throttle 😂🤣😂🤣😂. Absolutely love how we all do the same thing. I'm going to be sensible and not spend a fortune on a new bike and then throw a couple of grands worth of upgrades at it.... but that's all part of the fun.
Hey dude you just popped up on my feed I have owned a k8 and currently own a k7 I’m in the process of cleaning up a bit. I enjoyed you content. Congratulations on joining the gsxr bros!
This is going to be a great series with the K8, and the retro/classic/old nails....will also be great: a real point of difference for your channel - you're going to be a busy boy!
First two easy things to do before thinking about getting new discs are to clean the discs with some fine-is sand paper or scotch-brite and obvs brake cleaner, brake dust builds up and can cause judder, it looks like the discs are older than the pads, poss not cleaned when new pads were fitted. Also make sure the front wheel is aligned correctly, as many people (even some mechanics) fit them without aligning before doing up the pinch bolts and that can cause judder too, rare but possible. Also saw people saying it could be your headstock bearing, at least that is easy to check without pulling it apart
Bike has 3power settings on lhs bar ,,read that an R1 throttle tube get the quick response you need ,, warped disc not give you a pulse at the lever ,, probably look at the head bearings ,,on the beast you put a translogic quick shifter ,, brilliant stuff glad to see you like it ☘️☘️☘️☘️ from northern Ireland
Loose head bearings can give that brake judder you describe. In the garage hold the front brake on and rock the bike back and forward. If it's the bearings it can be felt through the top yoke. Have a look at a throttle tube from a 5vy R1 (04 - 06), if memory serves that will make yours q\a. Looking forward to the series on this bike.
@@LambChopRides Forgot to add you'll love the RD500 (bought one new in 1985 and wish I never sold it) never owned a RG 500 but had a RG400 import from BAT motorcycles in 1990. No electric start on these babies just a kick start, watch the 16" front wheel and narrow rev band and you'll love them!
Older sportbikes in decent condition are as rare as hens teeth these days, good for you. I also agree with your opinion on road salt. I usually wait for a good rain before heading out on the highways in spring.
Chopsie, next year it'll qualify for classic insurance...that's why I bought a K5, living in Central London and it costs me £100 to insure....I fitted rearsets, a quickshifter and brembo RCS master cylinder...perfect cheap track day tool. I can also vouch for the comment re headstock bearings causing low speed judder. Enjoy!!
Great video Chopsy, I have exactly the same bike. Bought it new in 2008 as a track bike, has a full yoshimura system and on track also a Yoshimura EM Pro ECU. Had to remove it for street use, if anyone are interested? The bike lost lots of power/Torque in the middle range with the std. ECU so it need a flash. Gearing gets much better with-1/+1 , a specially with a 55 profile tire . Helps the steering a lot, same with a good steering damper. I have Hyperpro forks and a re-valved rear shock with a progressive spring, made a big difference on the track 👍🏾 By the way my bike has only 2000 miles on the clock 😃
I'd call that a real one. Noughties bikes FTW. Fuel injection so no E10 gunked carbs, but no Euro p*sh. Love my 01 Ducati 750SS, the sound with twin remus cans and the clocks look like a Spitfire. Bellissimo.
I got a K7. Dna airfilter decat exhaust and slip on and an ecu remap. bike produces 174whp if you do these to your bike it will really wake up. They got pretty good engines for their age
loved mine... best mod -1 tooth front sprocket at 10K it points at the sun lol... transformed the ride. Had the brake rotors replaced under warranty 2 months from new
She's a beauty Chops! Take it back to the dealer about the marks! If you don't ask!!!! Hope you keep the looks all original with the mods? Love the paint scheme and standard look.
I think we all have thought about what you're doing. when we get older and can afford the thing we wanted 10/15/20 years ago. we buy it, then find out how much things have moved on. I did a 2001 blackbird in 2020 £3000 then £1800 in respray fairing and wheels. new tyres. end pipes. leds. just couldn't ride it when caught out in the rain! sold it £3000. bought a XSR700 with ABS :)
With a Ecu flash the low end mid range and topend will come alive even more.the Ecu is restricted very heavily in the Gsxr especially with the secondary throttle maps.great gearing for this bike is 17/45 if you weight over 160 and 17/44 if you’re under.a BMC air filter is recommend with full exhaust for this bike.these bikes can produce 170 whp stock motor with the right bolt ons and setup.great video 🤘🏽
Absolutely loving this series already !! I was disappointed with the mid-range of the 1000 k7 compared with the k5/k6 when they came out, but I rode a few with the de-cat pipe/ full systems and power commander - they were way spunkier in the 4 - 8k area 🙂 K7/K8 made 160 rwhp +/- when new.......is the next instalment ready yet ? !!!
That coating you’re referring to that came off your bike.. it’s your first day excitement gloss coating coming off your own eyes..😁 It’s still a beautiful motorcycle! Maybe even gorgeous.
You should be able to check if the discs are running out of true using a dial gauge against the discs and spinning the front wheel by hand. The latter being the hardest job not having a main stand.
Love the retro rides idea. I just picked up an '04 Nicky Hayden SP-2 with 14k miles riding on 12yo Dunlops. Bought it based on pictures from a dealership in Pennsylvania and then had it shipped to Hawaii. Hey come out and ride it here on Maui! Haleakala hwy is like a mini TT or a Pikes Peak. Good fun. Cheers.
I've got the same bike with arrow cans and link pipe fitted plus power commander, 1 tooth smaller on the front sprocket and on the back 1 tooth bigger and the front wheel will lift in 4th gear on full chat 😉 I don't see the point of getting anything more modern, the power at the crank on the 2008 model was acclaimed to be 185bhp as standard 5 bhp more than the big bang R1 but never really got a good review when it was tested back in the day probably due to its tall gearing 120mph in first gear😂 also the problem with the front brake feeling weak and suffer with brake fade on the track, I fitted new seals on the calipers and that helped loads as the old seals wasn't fully letting go of the disc causing them to fade ,great bike and definitely one of the more comfortable bikes to ride for a sports bike and looking forward to seeing what you do with yours enjoy..!
Older bike series? So much YES!!! Keep the K8 manual, Chopsy. Pure, analog, unadulterated fun! She's a sex machine. Glad to see no buyer's remorse. 👍👌 ❤❤
Before you go spending money on your brake judder, make sure you let your fork legs relax and centralise. I fit 2 sets of discs on my bike before realising the fork stubs just needed loosened and the front suspension bounced up and down on a few times and then the stubs bolts nipped back up with the front brake lever squeezed. Would have saved my a good few hundred quid. Nice bike though Chops.
Voluptuous and girth 😂 thought for a minute there I was watching one of those dodgy websites. This is going to be epic I cannot wait to see you on that RD500 and what a Brucie bonus he has an RG500 too 😳. The gixxer is a beauty so she is love the look of the older bikes they just do it for me 👍
She’s a sexy blue beast, buddy! Voluptuous and curvy K8💙 She’ll make a great track weapon. Get those front brakes sorted, some new Dunlop shoes, a sprocket swap, and that mid-range tweaked. And you’ll be laying down Rossi lap times. You made a great purchase, happy for ya, Chopsy🔝🎥🎬🔥🔥🔥🔥
I literally just baught this same bike. And there is definitely shutter in my front brakes. And theyre grabby. Mine has some marks on the fairings and its white and gray but its all good.
Brilliant as always Chopsie! Yes the quicker throttle is a must. I did a 2008 R1throttle tube on my K9 GSXR1000, way better. Cant wait to see the Gamma ride!
I've got a 2020 gsxf 1000 that's been mapped suspension done the lot. It's nowhere near as quick as a gsxr considering that they say it shares the same engine. The midrange is very flat
I've got a K8 1000 that I've had for 6 years, you might be interested to see how it compares to yours as I've done some modifications that you're tempted by. One of the biggest differences between new bikes is the gearing. Stock they are geared to do 101mph in 1st, which may be why you're finding it a bit flat. Mine is the following spec:
- Arrow cans and decat pipe
- Cresent/Micron headers
- R&R remap 173rwhp 81ft lbs
- Ohlins TTX shock
- Ohlins steering damper
- Kais fork cartridges
- HM plus quickshifter
- Brembo RCS M/C
- Brembo radial clutch M/C
- R6 monoblock calipers
- Brembo discs
- -1+2 gearing (I think, can't remember what I ordered now)
It's a completely different bike now than it was stock. Also in regards to flickability, the 190/50/17 rear is a tyre no manufacturer uses, and stepping up to a 190/55/17 will make it turn in quicker with a slightly taller sidewall and should help flickability too.
Either way, you can't go wrong with a K8 IMO!! Keep it up
👍
My 1000 k7
Spec:
• Set of forged magnesium alloy discs Marchesini
• Carbon air ducts, hager, pad on the pendulum and frame, under the tank, footrests, made to order in RSE
• Yoshimura dual exhaust
• Extreme Tech Rear shock absorber
• Set of monoblock front brake calipers Brembo M4
• Set of floating front brake discs Galfer
• Brembo RCS 19 Corsa Corta front brake machine
• Rizoma driver and passenger footrests
• Set of sliders and LSL weights
• HealTech X-TRE ignition delay shutdown unit
• Galfer Reinforced Hose Kit
• DID ZVM-X G&G Chain
• Zero Gravity Racing Double Bubble Windscreen
• K&N Zero Resistance Filter
• Sunstar 45 Rear star
+ every little thing
Check the head stock bearings.. a little play there will give you a ‘brake judder’ at low speed 👍
Yes great tip thanks 👍
Definatly sounds like the headstock bearings causing the judder
Wrote the same thing then saw this 😂
@@LambChopRides brake judder.. silicon eeeerverywhere... brake clean.. eeeeeverything especially the pads now.. that silicon crap will cook on when it ages to go opaque... its horrible crap
Gixers are known as wheelie machines, so would be no surprise the head bearings are shot
Unbelievable that a dealer would sell a bike with 10 year old tyres on. I guess they can’t be worried about getting negative feedback. Looking forward to the vid series. 👍🏻
Sounds like superbike factory
@@Bow-to-the-absurd doesn't it just. I looked at a bike online a while ago and it didn't show much damage in the "detail" shots. But then the close up video showed the detail bits slowly, then whizzed right passed some obvious panel damage, so I enquired for close up shots of areas and provided screenshots of the video.
All they did was send me a link to the page I'd already seen.
I asked them again, explaining again that I can see panel damage vaguely as they flew passed it pretending it wasn't there but I wanted to know the extent of the damage before I travelled and they didn't even respond.
I knew I was gonna be buying in a fixer upper, but if they can't be honest about damage and try to hide obvious stuff, then what else are they hiding!?
I'd now never ever touch a bike from there ever.
Chops I’ve gone back to an older bike form newer ones ie R1, mt10.. I sold them and got myself a 2014 fireblade, it is what it is I use it for pure fun on a sunny day the throw it in the garage at the end of the day and don’t worry about it.. clean it put fuel in it and just enjoy it. Simple motorcycling but as much fun as you can have on the roads in the south east of England 😎
I had a 2008 Gixer, the all black one. Bought it new and I sold it last year with 38,000klms on it. It had a full Yoshimura system, ECU flash, black screen. I never had it on track day but some of our very quiet, long straight roads I hit 296kph on it and 1100rpm shy of redline. I sold when I hit 63yrs old as I can't bend like a pretzel to fit on it. After I sold it, about 2months later, I bought a Royal Enfield Continental GT. Fun bike but no long distance bike, I have a HD Street Glide Special for that. So for my 64th birthday I bought, brand new a Suzuki GSX-S1000F. Pretty much the same feeling bike just sit upright a bit more. Oh on your Gixer pay close attention to the fork seals. I had to replace both. No brake problems though
I too have a gsxs-f and it’s amazing. All the power you can use on the street. Basically stole it for the price too 😎
@@Coldestaevadoit I did as well. I got it as I couldn't wait till the GT got here in Oz, not due till June or July. I think I the GSXR for $14,999 and the F for $200 more including on road costs.
Come on Chops! We're the same age and have had a very similar biking history. Don't go all soft on us and keep moaning about the lack of a down-blipper, rev-match yourself and enjoy the interaction with the bike (and don't become down-skilled into the process! ;) :D ) I do like a QS for up-shifts, but want to do the rev-matching down-shifts still myself! :) Good review, shows just how little of the electronics suite goes towards enjoyment and usability of the bike, if you know how to ride.... Obviously, electronics make you faster on track, but unless you're racing, and pushing that hard, who really cares? :)
He is crying for nothing he he
Yeh a lot of moaning and whinging gon on there bud , your like an old woman, get on the bike and enjoy riding it
Even bikes in the sub 11-grand territory these days have transmissions and linkage so good, downshifts can be mostly instant and seamless. Just steady the throttle with barely any engine load, fan the clutch with a quick squish and that shifter drops at the toe seamless, engine jumps instantly to the lower gear RPM and you're all back with the clutch released and ready to either engine brake or blast off. Get a feel for this method under varying engine loads and you can be cruising at highway speed in top gear, in a couple seconds simply BLIP BLIP BLIP (down three gears in less time it takes to say "three gears" without any unsettling the chassis or smoking the clutch whatsoever) and WHACK the throttle off into the sunset with solid power.
A clutch is a wear item, just like tires and brake pads. Don't be afraid to slip or fan it a tad, you don't need full-off disengagement, a big upset in power, a big lurch in chassis, a big gap in traction, followed by a slipping to match engine RPM to change a gear.
I love my k5, it came to me after 7 owners and in is fantastic condition with a full yoshimura system and white wheels, it’s now in its forever home 😍
7 owners 🤯
Nice one Chop's, glad to see the GSXR is all you wanted it to be... Really looking forward to the RD500LC & RG500 rides outs as will because they are my dream bikes too....!!
Like it ! Maybe £500 might get it up to date ? New rubber, discs, engine mapping, power mod ! It's not that far beyond what £20k+ will get you today ! Good stuff thanks for sharing
Yes £500 quid and she's going to be absolutely awesome 👌
LOL Nothing wrong with that bike compared to today's. Lots of people still prefer something without the electronics. As far as what to call it: Gixxer 1000. That's how it's known in the streets. I'm not really a Suzuki fan, but when someone says they have a Gixxer 1000 I'm always happy to see one.
If you can, dyno compare this with the new one. There would be timing retarding on the first few gears so get the plug for that for more low/midrange in 1, 2, 3. Go a lithium battery and single muffler to lose easy weight.
Really love the twin cans.
I wish Suzuki would revert back to two smaller ones instead of the giant single dustbin they currently have.
Weight and flush looks so much better than 2 big cans
Great vid and lovely looking bike. That shopping list was getting bigger as the vid went on :D Looking forward to the mod videos and track action :)
Haha yeah it was Chris 😄 👍
She is such a beautiful bike. Sounds like there is so much stuff to look forward to this year on here. It is better than TV. LOVE IT!
i got me a 17 gsxr1000 too. its got a loud ticking till it warms up.
Nice one chopsie! Bike looks and sounds great - I just knew you'd want to take it apart though......
Haha can't help myself 🤣🤣
🛎ends
@@johnparton2050 anything you want to talk about John?
@@johnparton2050 someone's salty
Keep your nose out, Andy, and while you're at it, learn how to ride like Chopsie.
Good updates planned but don’t compromise the well-rounded nature of the Gixxer which I think makes it a unique sportbike.
Yes indeed Paul good point 👍
A proper ECU flash (and dyno session) would surely be much better than a Power Commander?
You will not regret riding the RG500 Chopsy, I had a G reg 89 plate that I had in black, red and white, I regret selling it to the day, despite now having an S1000RR, I still miss it, crazy but true, the power delivery, the smell of full synthetic 2 stoke was intoxicating and those 2 upper and 2 under pipes from the square 4 smoking on start up were immense and very very satisfying ......... sounds like an awesome series mate, looking forward to it
In regards to the midrange, the k7-8 gsxr ecu stock has timing retarder in all the lower gears, If you decat and then get the ecu flashed you could have that sorted out.
Having owned my all black k7 thou for the past 5 years, I can say without a doubt, I don't need any other bike, this bike has it all, power, handling, looks and grace, I've recently ditched the twin arrows for an M4 streetslayer exhaust, and noticed a definite difference in the power delivery now that horrible cat has gone, my next things are a pc5, a brembo or hel master cylinder, and some new tyres, then it will be even better, enjoy the new ride chops 👍
My first bike was a GSX-R600 K8 so looking forward to this! I always wanted the 1000 as the 600 isn’t a great road bike, it’s too flat until at least 8k but I loved the bike and always thought the 1000 would be amazing although these days I ride a S1000RR.
For a older bike I think that it looks better than some of these modern machines for sure.
I've always had a soft spot for the GSXR from way back in the day as Suzuki have always had competitive solid machines ......even though they haven't been up there with their development as of late......they are still legendary.
Great review again Chops......can't wait to see what you've got planned for it. 👍😊
Thanks Dean 👍
Great video chops . Looking forward to the mods and you riding older bikes . We can't all afford new machines . Gixxer's forever 😁👍
Any casual passer by who didn't know bikes would think that a brand new bike. The slight paint coating and marks you point out are teensy grumbles. Seriously, what a beaut! I been looking at similar year MV Augusta F4's, and, like this, most of them are in immaculate condition for their age. But, I never considered a GSXr, so am watching this with much interest.
A gixer is never a mistake…although I’m on a zx9r c2 at the moment ….love the old school
A very pragmatic first ride review, can hear it in your voice. Some bikes blow you away as soon as you set off on them and others grow on you :). Hopefully with some tweaking you'll get the wow-factor!
Keep,the twin cans… looks awesome and no problems with MOT, police or noise on track. Spend time and money on the suspension and brakes plus the gear emulator and power commander to open it up a bit.
Canada here, I always allowed two heavy rainfalls in the spring before riding my bikes. Exactly the truth when it comes to road salt.
Yes absolutely 👍
I made a Lamb Chop thingie and bought myself a used bike, a R1-16. It's been on it's side but after rebuilding it, ...can hardly wait until the snow will disappear. Living in Sweden.🥶
Had one of these since new, probably be the last new vehicle I will ever buy, so figured it was worth keeping. Over the years I have added a flat bar conversion (dodgy wrists), full Arrow system, PCV, 1 down on the front sprocket and 2 up on the back plus a taller 55 rear tyre...plus a speedo healer. I love it and it's plenty fast enough for what I need. Oh, and 'Analog' is probably the best description rather than Classic or Retro ;)
I owned a new k7 thou and modded it to death and the best mods were swapping the forks with k tech internals .fitting a WP rear race shock. Full yoshi exhaust system. Velocity stacks and pc5 yamaha R1 front calipers (huge diffrence in performance) braided brake lines ... one of my fav bikes I've ever owned !! I have a vid of it on TH-cam with a silly loud exhaust before I fitted the yoshi system and i fitted galfer wavy discs front and rear and rear sets and a diffrent cam in the throttle and lots of carbon fibre 👍
There is a sweet spot with bikes around this time, 2004-8, the ZX10 and GSXR were light, good looking, powerful… afterwards they got uglier and heavier.
Had me a K5 and just loved it, low kms and still had the stock pipe which was fine by me, quiet around town and really howled out country. the only big mod i made was to put a Brembo brake master cylinder and braided brake lines and she was good to go.oh i also had the suspension serviced, new oil and seals and i was a happy camper cant wait for the rest of the series Chops, Love that generation of bikes, keep up the good work mate
Try freeing up the bobbins on the brake discs. That might be the cause of the brake judder.
OK thanks Jeremy will do 👍
I’ve got a K6 and had the same brake judder, turned out to be the front wheel bearings and now everything’s fine
Love this old bike series! It was either K5 or Gen 1 ZX-10R, both great bikes I just prefer the looks of the ZX and it has more sentimental value since my first bike with the original Ninja 900, the bike that started it all. With that said the '86 GSXR1100 has a special place in my heart :-)
Beautiful bike which could be easily and relatively cheaply upgraded. I’m extremely jealous of the upcoming test ride.. my absolute dream machine!
I had that problem with brakes before. And fixed by cleaning and copper greasing the pins which hold pads, They was dry so it drag pads on and of when start braking and stop that if you put more pressure to the brake liver. Great to see some older bikes on Your channel.
185 at the crank. I got an K7 with no cat and a carbon Yoshimura exhaust symstem and it makes 181 at the wheel and 121 nm.
Have covered 100.000 km with exactly the same bike. Decat, akra single silencer made it more nimble. Best mod was drop a tooth on the front sprocket. Gave much more midrange for 20 € ! Had at least 4 warped front discs, common problem never solved. Breaking probably the weakest area of the bike. Bullet proof. Only a crash with a suv killed it at 130000 km. Still miss it.
I've got a 99 600 srad, just love it cos it feels like I'm riding it instead of all the electronics doing all the work
STRIP FONT AND REAR SUSPENSION AND GREASE EVERYTHING BEFORE THE SUN COMES OUT!!..! also while your at it check and clean all of the electrical conectors to avoid the green death!! That being said, ¬ I've had a k6 from new, ¬ oz wheels ohlins, 3 teeth up on the back, pipe, filter , power comander/quick shifter, with a custom map, and a set of helibars , I tried a few later models but other than a bit more top end they didn't offer anything more, except price, weight and nowadays complexity ( I can still service myne ), I appreciate how things have moved on in the tech department and as fantastic as it all is, how can you justify £20.000 + to go faster round a track. the old k6 has more than enough to enjoy a spirited road ride, without worrying too much if you bin it, , the only code it's ever thrown up in 15 years is the exhaust valve bollox ! all reasons why I still love it, !!. be careful chops ¬ you might end up loving yours!..
So that's New tyres ,discs , rear shock, fork internals, headstock bearings. Power commander, link pipe, front sprocket, quick shifter, quick throttle 😂🤣😂🤣😂. Absolutely love how we all do the same thing. I'm going to be sensible and not spend a fortune on a new bike and then throw a couple of grands worth of upgrades at it.... but that's all part of the fun.
Decent bike chops, you’re getting carried away with the mods already lol. Looking forward to the older bikes.
Hey dude you just popped up on my feed I have owned a k8 and currently own a k7 I’m in the process of cleaning up a bit. I enjoyed you content. Congratulations on joining the gsxr bros!
Thanks Rhys 👍
Love how it still holds up decently compared to new sports bikes, it’s a lovely example chops. Ride safe 🏍
This is going to be a great series with the K8, and the retro/classic/old nails....will also be great: a real point of difference for your channel - you're going to be a busy boy!
Thanks Gary 👍
Great flashback. I had a k5 for years and loved it. Only problem was keeping it corrosion free.
Stonkin bike chopsy.. Looks and sounds amazing.. Look forward to your subtle changes... 😉👌
Get it up to Gav at MSG once the linkpipe is on for a proper remap and you wont need a power commander. GIXER specialists and all round great guys.
First two easy things to do before thinking about getting new discs are to clean the discs with some fine-is sand paper or scotch-brite and obvs brake cleaner, brake dust builds up and can cause judder, it looks like the discs are older than the pads, poss not cleaned when new pads were fitted.
Also make sure the front wheel is aligned correctly, as many people (even some mechanics) fit them without aligning before doing up the pinch bolts and that can cause judder too, rare but possible. Also saw people saying it could be your headstock bearing, at least that is easy to check without pulling it apart
Great tips I plan to check all that stuff thanks 👍
Bike has 3power settings on lhs bar ,,read that an R1 throttle tube get the quick response you need ,, warped disc not give you a pulse at the lever ,, probably look at the head bearings ,,on the beast you put a translogic quick shifter ,, brilliant stuff glad to see you like it ☘️☘️☘️☘️ from northern Ireland
Full pipe, Sprint filter, ECU flash, you'll have all the poke you need.
Loose head bearings can give that brake judder you describe. In the garage hold the front brake on and rock the bike back and forward. If it's the bearings it can be felt through the top yoke.
Have a look at a throttle tube from a 5vy R1 (04 - 06), if memory serves that will make yours q\a.
Looking forward to the series on this bike.
Still a thing if beauty, only miss ABS! Thanks for taking us along LCR
Thanks Iain 👍
@@LambChopRides Forgot to add you'll love the RD500 (bought one new in 1985 and wish I never sold it) never owned a RG 500 but had a RG400 import from BAT motorcycles in 1990.
No electric start on these babies just a kick start, watch the 16" front wheel and narrow rev band and you'll love them!
I'd say it is a iconic used analog sport bike.
Older sportbikes in decent condition are as rare as hens teeth these days, good for you. I also agree with your opinion on road salt. I usually wait for a good rain before heading out on the highways in spring.
Gsxr 1000 is a future classic for proper analog power superbike
Chopsie, next year it'll qualify for classic insurance...that's why I bought a K5, living in Central London and it costs me £100 to insure....I fitted rearsets, a quickshifter and brembo RCS master cylinder...perfect cheap track day tool. I can also vouch for the comment re headstock bearings causing low speed judder. Enjoy!!
Definitely would look forward to a RG500 review in the warmer weather Chops!
Great video Chopsy, I have exactly the same bike. Bought it new in 2008 as a track bike, has a full yoshimura system and on track also a Yoshimura EM Pro ECU. Had to remove it for street use, if anyone are interested?
The bike lost lots of power/Torque in the middle range with the std. ECU so it need a flash. Gearing gets much better with-1/+1 , a specially with a 55 profile tire . Helps the steering a lot, same with a good steering damper. I have Hyperpro forks and a re-valved rear shock with a progressive spring, made a big difference on the track 👍🏾
By the way my bike has only 2000 miles on the clock 😃
Sounds great Olga 👍
I'd call that a real one. Noughties bikes FTW. Fuel injection so no E10 gunked carbs, but no Euro p*sh.
Love my 01 Ducati 750SS, the sound with twin remus cans and the clocks look like a Spitfire. Bellissimo.
I got a K7. Dna airfilter decat exhaust and slip on and an ecu remap. bike produces 174whp if you do these to your bike it will really wake up. They got pretty good engines for their age
I had the k7, loved that bike, until a 90mph highside at pembury, 😳 when they snap.....they snap quick....... enjoy mate.
loved mine... best mod -1 tooth front sprocket at 10K it points at the sun lol... transformed the ride. Had the brake rotors replaced under warranty 2 months from new
She's a beauty Chops! Take it back to the dealer about the marks! If you don't ask!!!! Hope you keep the looks all original with the mods? Love the paint scheme and standard look.
I think we all have thought about what you're doing. when we get older and can afford the thing we wanted 10/15/20 years ago. we buy it, then find out how much things have moved on. I did a 2001 blackbird in 2020 £3000 then £1800 in respray fairing and wheels. new tyres. end pipes. leds. just couldn't ride it when caught out in the rain! sold it £3000. bought a XSR700 with ABS :)
With a Ecu flash the low end mid range and topend will come alive even more.the Ecu is restricted very heavily in the Gsxr especially with the secondary throttle maps.great gearing for this bike is 17/45 if you weight over 160 and 17/44 if you’re under.a BMC air filter is recommend with full exhaust for this bike.these bikes can produce 170 whp stock motor with the right bolt ons and setup.great video 🤘🏽
Congrats on your NEW ACQUISITION THERE'S NO GREATER BANG FOR THE PERFORMANCE BUCK THAN A BIKE🏍️
Absolutely loving this series already !! I was disappointed with the mid-range of the 1000 k7 compared with the k5/k6 when they came out, but I rode a few with the de-cat pipe/ full systems and power commander - they were way spunkier in the 4 - 8k area 🙂 K7/K8 made 160 rwhp +/- when new.......is the next instalment ready yet ? !!!
I own a k6 1000 with some mods lots of mid range power The yrs after that weren't as good
@@skatman3872 k5/6 were the creme de la creme of this era of gsxr looking forward to getting my hands on one ready for summer
@@rxl-soul8514 exactly right
@Rossi Carmichael probably wieght zx10s are nice I love the krt
@Rossi Carmichael Only the first gen ZX-10R was considered a « widow maker » because of the lack of steering damper (I think).
That coating you’re referring to that came off your bike.. it’s your first day excitement gloss coating coming off your own eyes..😁 It’s still a beautiful motorcycle! Maybe even gorgeous.
Best way to describe - Modern Classic.
its a beast on wheels belive had one best bike ever made
You should be able to check if the discs are running out of true using a dial gauge against the discs and spinning the front wheel by hand. The latter being the hardest job not having a main stand.
Dream bike riding sounds incredible! Great you’re getting that chance.
Get it in the garage and let’s see what you do to her.✌️🍻
I bought a street triple from a triumph dealer with what I’d call a bald tyre. They argued it had 1mm left which is legal and wouldn’t budge on it!
Love the retro rides idea. I just picked up an '04 Nicky Hayden SP-2 with 14k miles riding on 12yo Dunlops. Bought it based on pictures from a dealership in Pennsylvania and then had it shipped to Hawaii. Hey come out and ride it here on Maui! Haleakala hwy is like a mini TT or a Pikes Peak. Good fun. Cheers.
I've got the same bike with arrow cans and link pipe fitted plus power commander, 1 tooth smaller on the front sprocket and on the back 1 tooth bigger and the front wheel will lift in 4th gear on full chat 😉 I don't see the point of getting anything more modern, the power at the crank on the 2008 model was acclaimed to be 185bhp as standard 5 bhp more than the big bang R1 but never really got a good review when it was tested back in the day probably due to its tall gearing 120mph in first gear😂 also the problem with the front brake feeling weak and suffer with brake fade on the track, I fitted new seals on the calipers and that helped loads as the old seals wasn't fully letting go of the disc causing them to fade ,great bike and definitely one of the more comfortable bikes to ride for a sports bike and looking forward to seeing what you do with yours enjoy..!
Older bike series? So much YES!!! Keep the K8 manual, Chopsy. Pure, analog, unadulterated fun! She's a sex machine. Glad to see no buyer's remorse. 👍👌
❤❤
Before you go spending money on your brake judder, make sure you let your fork legs relax and centralise. I fit 2 sets of discs on my bike before realising the fork stubs just needed loosened and the front suspension bounced up and down on a few times and then the stubs bolts nipped back up with the front brake lever squeezed. Would have saved my a good few hundred quid.
Nice bike though Chops.
Looking forward to the adventures you get up to this year on it. Bought a K7 750 last year as a track bike
i'd class it as a modern classic in the making :)
Get the gear selector emulator to get rid of the torque reduction in the first 3 gears Chops, makes the bike much more sprightly.
OK good tip 👌
Look forward to hearing what you have to do to sort her out.Good luck.
Very nice young Harold ..
We like the old ones . 👍🏼
Voluptuous and girth 😂 thought for a minute there I was watching one of those dodgy websites. This is going to be epic I cannot wait to see you on that RD500 and what a Brucie bonus he has an RG500 too 😳. The gixxer is a beauty so she is love the look of the older bikes they just do it for me 👍
I have a K8 1000 and a L7 1000r, love both of them for different reasons. I dont plan to sell either. The L7 is more of a longer cruiser for me
She’s a sexy blue beast, buddy! Voluptuous and curvy K8💙 She’ll make a great track weapon. Get those front brakes sorted, some new Dunlop shoes, a sprocket swap, and that mid-range tweaked. And you’ll be laying down Rossi lap times. You made a great purchase, happy for ya, Chopsy🔝🎥🎬🔥🔥🔥🔥
Yes can't wait to get her all sorted Mike! Just need some garage space to work on her. Bloody Tuareg and 300 gasgas taking up all the spare room 🤣
Future classic is a good description she is a keeper
I literally just baught this same bike. And there is definitely shutter in my front brakes. And theyre grabby. Mine has some marks on the fairings and its white and gray but its all good.
Brilliant as always Chopsie! Yes the quicker throttle is a must. I did a 2008 R1throttle tube on my K9 GSXR1000, way better. Cant wait to see the Gamma ride!
You Sir, have an immortal bike.
For my K3 1000 track bike I put on Brembo Oro disks. Crazy thing is they were cheaper than OEM!
I’ve just picked up a k6 one owner from new and love it
I've never seen anyone on Gixxer with gloves and a jacket before. Nice video.
Tooth down in the front on my k6 gave a lot of fun snap in the mid range. Can only imagine that and no cat on yours would do the same if not more.
If it isn't head bearings check the brake disc bobbins rotate freely
Take the PAR Valve off and lock plates. And take the injectors to be clean and balanced. Big difference on K8 balancing the injectors
Good tips 👍
It would be a interesting comparison between this and the new GSXS 1000 once you've done the work to it
Yes was thinking actually could borrow the new GSXR for a back to back test.. 👍
@@LambChopRides yes please
I've got a 2020 gsxf 1000 that's been mapped suspension done the lot. It's nowhere near as quick as a gsxr considering that they say it shares the same engine. The midrange is very flat