Yeah that's what I discovered w/ my X1C. I added a chamber heater for cheap. >50C chamber temps will help with warping. Textured PEI plate, no glue. 110C bed temp.
What setting is causing it to slow down so much at the beginning/end of each layer? At beginning of video. Just curious. Looks like maybe slower overhangs?
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
lol i just looked up the price on the 120ml bottle you have. its now 45 bucks! I think i'll try the rim trick and textured plate first
Printing ASA or ABS on a machine that doesn't have a heated chamber so you can control the temperature is going to be a hit and miss bad time
Yeah that's what I discovered w/ my X1C. I added a chamber heater for cheap. >50C chamber temps will help with warping. Textured PEI plate, no glue. 110C bed temp.
@@skinnybricks Any brim?
So p1s got no problem in Printing asa? What is The fail rate using The glue?
What are you using for interior insulation?
What about ventilation etc? Isn't ASA dangerous and releasing harmful chemicals? Or is P1S internal filter good enough?
I do Eleego black ASA with brim and bed temp 110C.
how do you deal with air filtration?
Do you cooling when asa prints?
Is your nose blocked?
What setting is causing it to slow down so much at the beginning/end of each layer? At beginning of video. Just curious. Looks like maybe slower overhangs?
yes looks like the threat overhangs, which would need to be printed slower