วีดีโอ

Beautiful. Thanks for the tutorial.

+1 в карму!!!

Супер гуд!!!❣

Literally skipped all the tough parts which would be the most useful to see. So what’s the point of this?

wasnt there a way of perhaps using some armature wire or wooden rods in the leg area to re-enforce it?

Nice work! What kind of clay do you use and how are you going to remove the metal on her back?

What other fixative could be used to replace the Keyon Crystal Clear. I have other fixatives and varnishes for pastel drawings would they work?

How hollow do you need to make the sculptures? Are you filling the mold 75%? Or less? How solid/hollow should I aim to make my casts? Does your rotational technique work if you fill the mold completely? Your videos are absolutely fantastic. Thank you so much!

Electrical guy here... You are correct, the motor needs a solid 12vdc ( Volts Direct Current ) to go through the motor. And a thought about your Fuse. 10 amps is pretty high for what you are using. 30w/12v = 2.5a. the fuse is there to protect the motor from burning up so the fuse you are using is 2 times too big. for a 30w motor and where it is continually cranking a load, it is recommended to use a fuse rated 250% over it's Full load amps. So 2.5a x 2.5 = 6-1/4 amp fuse would be more appropriate. When that fuse blows, you know you have a problem, and you are pushing the motor too hard while also saving the motor's internal integrity. I know I'm a year late, and I hope your rig has worked as planned without going through too much heartache. And I look forward to building my own, based on your design! :)

Is it the vinegar makes it rusty?

how do you stop bubbles in the plaster?

Beautiful thank you, and thanks for the explanation.I didn't understand the prices you said is for faux sculptures or for bronze sculpture? Thank you.

Great video. Does that book show you how to make drapery on a doll or maquette and have it stay? Is it wax or something else?

How do you salvage your clay after demolding with the Crystal Clear on top? I've never heard of doing this and I'm intrigued, but I also want to be able to reuse my clay for more sculpts.

❤❤it😊😊😊

Gotcha. Thankyou!

Thankyou

Just looking at your sculpture tells me to subscribe! Wow! I will be back!

Wgere did you get the baby mold?

Do you need to make registration key holes?

Great video man! I have one problem, though. I tried to switch from a common 2-axis roto machine to your 1-axis solution using a similar model. However, every time, one spot is not filled with plaster. Have you had that problem?

Not much info about casting hydro stone. And turn the stupid music off

You talk tooomuch wich is very boring

Como se llama la pintura

Hey, I work in plaster... do u have a formula to make white plaster, lightly aged? Like a yellowed brown finish? I will wax afterwards. Thx. -Cliff

It was very exciting, thank you Does it need fixing or polishing at the end of the job?

Woudl reassembly work with concrete? I have a figure I would like to cast in concrete but I may have to take it apart .

It's perfect great job!

Would I use the same steps to make a mold go upside down for cement pouring? I need it to be for a 4ft statue. I plan to make a rubber MD and a fiberglass mold. Only issue is ... I need to flip upside down to fill with cement.

18/04/2024 i'm looking for a video like this a few days and i'm so glad i find you. Thank you for sharing this knowledge. cheers from brasil

👏👏👏👏👏👏🤩🤩🤩🤩🤩😍😍😍

Hi Jon! First of all thank you for all of your videos, they have been so helpful to me as a beginner in all of this... I'm not too sure why you don't have over 100k subscribers right now but I hope that will happen for you... I was wondering is it necessary to put registration keys in the mother mold? I noticed that you did not do that for this mold which looks so much simpler and better in my opinion than others that I've seen.

Nice work. If you listen to videos of his son Jiri they pronounced their name Mew-SHAH in the French way. Impress your art friends.

I’m preparing for my first mold. Thanks for doing what you do it will really help

Thank you for your share , It’s really helped me 😊

I want to bring sukulski back to life

Thanks a ton

I'm wondering if there is a formula for mixing plaster and water to make it liquid enough to use as slip cast. My idea is to use the plaster instead of clay and make hollowed figurines.

What's composion of resin kobalt a t h powder hardner

Not everybody is interested in this topic, but for those of us who want/need to know, it's a real blessing. Thank you so much for sharing your knowledge.

Can I also use fibreglass material as the mother mould for silicone?.

Can I also use fibreglass material as the mother mould for silicone?.

Can I use silicone mould for fibreglass casting?

Very interesting to watch and super helpful as I have been looking for a good way to recreate this type of finish for a long time. Thank you very much! A couple of questions. 1) If you do not want the white aging effect, but just the browns and blacks, do you just not use the Tiffany Green? 2) Do you spray the completed piece again with Krylon or some type of clear sealer? I am just wondering about the shoe polish coming off when someone was to clean the piece or dust it.

I would not listen to anyone else but you

The best !

Is there a reason you don't vacuum de-gas the slurry? Does it cause a problem?

Great video. Very informative. Getting back into sculpture after many years of life getting in the way. Your video was great to refresh my memory and also learned a lot more!