- 68
- 76 934
GlovedUp Garage
United States
เข้าร่วมเมื่อ 23 พ.ค. 2019
For as long as I can remember I have worn gloves of some kind while working on cars. Mostly to keep my hands from getting dirty, but it has saved my skin a time or two. My friends always made a glove reference when I posted pics of my projects or repairs so what better to call my channel than GlovedUp Garage. Watch as we work on all kinds of project vehicles, sometimes while wearing nitrile mechanic gloves.
Fox Body Mustang Power Window and Power Lock Repairs on the cheap 1989 Mustang Coupe
Fixing the power windows, power locks, and installing a new radio on the cheap 1989 Mustang Coupe Fox Body Project car.
มุมมอง: 144
วีดีโอ
Mercury Marauder is back on the road!! The final touches before it leaves
มุมมอง 171หลายเดือนก่อน
The 2004 Mercury Marauder project is done. I’ll update the description once I have a link for the listing of the vehicle for sale. Thanks to all who watched this series. Rest in peace Mike 🥹
Project updates, and some bad news
มุมมอง 107หลายเดือนก่อน
Updates about all the current projects, not all the updates are good. 😢
Getting the 1989 Mustang 5.0 Coupe ready for the road- Will it drive again Part 2
มุมมอง 792หลายเดือนก่อน
Finishing up some of the small items on our cheap 1989 Mustang 5.0 5 speed Coupe project. Can I get this on the road again???
Will it start??? The Cheap 1989 Mustang 5.0 5 Speed Coupe project progress part 1
มุมมอง 1.3K2 หลายเดือนก่อน
Will my cheap rusty 1989 Mustang 5.0 5 speed coupe project start? This is a long one, but shows the progress of getting a “barn find” fox body back on the road.
Is the US General Gen 3 72” Toolbox worth the cost??
มุมมอง 1.9K2 หลายเดือนก่อน
I have upgraded to the US General 72” roller cabinet from Harbor Freight. After the video was made I priced two builds through my Snap On dealer. A similar style box in the Masters series would be $25000, while the Equos Series would be $22750. Snap on does have some cool options, but this is a little over 10% of the cost of a Snap On.
Cheap Dynamat install on our 1993 Mustang LX Project Fauxbra 93 Cobra Clone
มุมมอง 3873 หลายเดือนก่อน
Does cheap Dynamat work as well as the real thing? Peel and Seal is available at most Home Improvement stores and is much cheaper than the real thing.
I bought a cheap 1989 Mustang 5.0 5 Speed Notch!!! Did I get a good deal or did I get hosed??
มุมมอง 9K4 หลายเดือนก่อน
I bought the cheapest 1989 5.0 5 speed coupes I’ve seen in a long time. It definitely needs work, but did I get a good deal or did I get hosed? Lots of rust repair and unknown mechanical issues could make this cheap 89 notch not so cheap to get running again.
1993 Mustang LX Project Faux-bra part 3
มุมมอง 975 หลายเดือนก่อน
Restoring the AOD shifter and temporarily installing the carpet into the 1993 Mustang LX Foxbody.
1993 Mustang LX Project FauxBra Part 2
มุมมอง 1386 หลายเดือนก่อน
Cleaning up the floor patch and seam sealing the floor to make some progress on this Fox Body Mustang.
1993 Fauxbra Cobra Floor Repair Part 1
มุมมอง 1116 หลายเดือนก่อน
Part 1 of the repair on the 1993 Mustang LX Cobra Clone project. Creating a template and welding up the hole for the five speed to auto shifter conversion.
New Explorer ST Custom Touches
มุมมอง 2317 หลายเดือนก่อน
Bucking Rabbit sent me some custom interior items for my Explorer ST. Check out their site for new Explorer ST items as them release them. Thanks again to Adamm from Bucking Rabbit!! buckingrabbit.com/products/st-cup-inserts
Is This A Real 1993 Mustang Cobra?? Our next project update
มุมมอง 6468 หลายเดือนก่อน
My next project car just showed up, it’s going to be a while before I can get started but I wanted to give everyone an update on what’s coming up.
A Deer Hit My Explorer ST- What happens next?
มุมมอง 171ปีที่แล้ว
A Deer Hit My Explorer ST- What happens next?
Explorer ST Flowmaster FlowFX Exhaust System Installed!!!
มุมมอง 7Kปีที่แล้ว
Explorer ST Flowmaster FlowFX Exhaust System Installed!!!
2023 First Update, helicopter ride, plans for this year
มุมมอง 120ปีที่แล้ว
2023 First Update, helicopter ride, plans for this year
2004 Mercury Marauder Part 4 Changing fluids and making a mess
มุมมอง 739ปีที่แล้ว
2004 Mercury Marauder Part 4 Changing fluids and making a mess
2004 Mercury Marauder Part 3 making progress
มุมมอง 306ปีที่แล้ว
2004 Mercury Marauder Part 3 making progress
The Lincoln is gone, project updates November 2022
มุมมอง 455ปีที่แล้ว
The Lincoln is gone, project updates November 2022
Fox Body Dash Restoration Part 2, a little less boring and shorter
มุมมอง 191ปีที่แล้ว
Fox Body Dash Restoration Part 2, a little less boring and shorter
Fox body Mustang Dash Restoration Part 1 *LONG BORING VIDEO ALERT*
มุมมอง 481ปีที่แล้ว
Fox body Mustang Dash Restoration Part 1 *LONG BORING VIDEO ALERT*
Foxbody Mustang Quarter Window Restoration
มุมมอง 2Kปีที่แล้ว
Foxbody Mustang Quarter Window Restoration
Our 2003 Mercury Marauder finds a new home….
มุมมอง 598ปีที่แล้ว
Our 2003 Mercury Marauder finds a new home….
Our 2003 Mercury Marauder is leaving, time for an update
มุมมอง 1.5Kปีที่แล้ว
Our 2003 Mercury Marauder is leaving, time for an update
Can we save this 2004 Mercury Marauder???
มุมมอง 7K2 ปีที่แล้ว
Can we save this 2004 Mercury Marauder???
2003 Mercury Marauder No Crank No Start issue finally solved!!!
มุมมอง 3.8K2 ปีที่แล้ว
2003 Mercury Marauder No Crank No Start issue finally solved!!!
Not much of an update, update…. Expedition still in the way
มุมมอง 1272 ปีที่แล้ว
Not much of an update, update…. Expedition still in the way
You don’t have to cut the end off just remove the whole piece it’s easy I did it on my box.
I figured it out finally, but thanks for the heads up!! And thanks for watching!!
I would have tried it the way the adapter was already wired to see if it works, especially since all 3 were that way. Maybe the car gets a signal from the radio and then gives power to the orange/black, which would then energize the blue/white. Also, is that a cassette-shaped fade pattern on the passenger seat bottom? If so, how period correct is that lol.
I thought about that some more after I put it in, I might pull it back out and try another adapter. Yes!! The passenger seat is faded around a cassette adapter 😂🤣 Thanks for watching!!
Love that movie
Has my attention! I owned a similar Marauder some years back. Identical colors. Reliable and gorgeous. Mine was stock with similar mileage. Sadly, it was underpowered and needed bigger/better brakes. Would love to have this one if I had a place for it. Bought a Chrysler 300S 5.7L to replace the Marauder - no regrets.
I like the 300S, I searched for a SRT for a while but couldn’t find one in my price range a few years back. There’s something about a big fast car that makes it more fun than it should be. Thanks for watching!!
2020 Ford Explorer ST, 60,196 miles
I’m up to 91k now. Still loving this thing.
Stop whining and do work..
Work has been done 😂 Just a couple 800 Motrins and a bottle of water.
@@GlovedUpGarage 🤣🤣
😂
Sorry to hear about your rib. Sucks getting older. I got a crazy back myself. Very sad to hear about the owner of the Merauder. Prayers for him and his family 🙏 Keep putting out the videos! I am looking forward to all the projects I knew someone that had a jig and did extensive Mustang work. But he is now retired from that. Mr. Kerns did amazing work! I hope to see the SSP restored. Keep the videos coming! 👊😎✌️
@@BigStickStangs I’m already getting better, it just takes longer to spring back I’ve found lol. I knew the guys at Kerns had jigs for the older Mustangs but nothing newer than 1973. I’m going to need some more equipment before I can tackle it along with more room in the shop to work around it. Thanks for watching!!!
Hey i got questions to ask
Ask away!!
hey man this is pretty cool im in the exact same boat with a 91! its a 5 speed as well and tomorrow im installing a fuel pump to see if i can get it to run!!
Thank you and good luck with your car!! Thanks for watching!!
Those draw locks can be removed. I have a few US general boxes in my shop. I removed those plastic stripps and have them stored somewhere. Makes the boxes more pleasant to use.
I figured out how to get them out after seeing a post in the Harbor Freight Hacks group on Facebook. I removed the rubber pad on top to install the hutch, but now it slides a little bit. Thanks for the tips, and thanks for watching!!
My first car was a 93 fox I bought it for 300$ from my x’s dad it had quote MAJOR PROBLEMS it would need to be towed his house was 15 yard from a gas station it had a stuck gas gauge and a empty tank and a dead battery he was pissed I fixed it right in his driveway
I miss the cheap cheap foxes that needed easy fixes. I’m sure those days are gone. Thanks for watching!!!
Drum shoes can be changed without taking everything apart. I've worked on cars for over twenty years with most of them being rear drums. Got to learn to beat the flat rate.
You definitely have to get creative when you’re racing the clock. Thanks for watching!!
Quad shocks still there that's just extra weight
I’ll get them out eventually. The bolt on weight is still on the rear end too.
My 2013 focus has rear drum brakes 😂
I can count on one hand how many times I’ve changed the shoes on drum brakes, I’ve done hundreds of discs. Thanks for watching!!
Nice car. Man these cars will nickel and dime you to death. I e been working on the wife’s 93 all weekend. And haven’t been able to touch my 86 in a month or so lol just keep plugging away. It will get there.
I’m hoping to get most of the small stuff fixed before something else breaks. 😂😂 Thanks for watching!!
I have number 2020 Mercury Marauder.
Did you get your number from Ford? Marti Reports is now selling a similar report for Marauders. Thanks for watching!!
@@GlovedUpGarage Ford gave me the birth certificate
Lmr has those filters I just bought a couple for 2 of my cars.
Awesome, I’ll get a few ordered. Thank you and thanks for watching!!
Lol too short again Pizza boy
I won’t make that mistake twice 😂🤣😂🤣
Tired of seeing 60s and 70s cars will it run while I love cars period TH-cam is inundated with them this is refreshing to see nice video
Those are easier to get started in my opinion. The 80’s and 90’s cars have so much more that can go wrong. But that’s just me with no carb experience speaking 😂. Thanks for watching!!
That's awesome man congrats!
Thank you and thanks for watching!!
I personally like to run factory ford copper core spark plugs in my 5.0. Over the last 25 years of owning my 1990 mustang I realized that I no not like NGK plugs, the factory ford copper ones produce much more power and last longer.
Normally I’d go with the Motorcraft coppers, but for the budget these NGK’s will work. It’s bone stock so I won’t be setting dyno records 😂. Thanks for watching!!
This was so chill to just put on and listen too with a glance every now and then. Keep it up brother!!
Thank you!! I know it’s not the best quality out there, but I keep it honest and do what I can. Thanks for watching!!
The next vid is up, will it start part 1 Will it start??? The Cheap 1989 Mustang 5.0 5 Speed Coupe project progress part 1 th-cam.com/video/GzXFe4i_98U/w-d-xo.html
SO Glad I don't live in the Rust Belt! Vehicle's last forever here if you take care of them!
It definitely has taken its toll on these cars. I’m still surprised to find clean cars with no rust. Thanks for watching!!
Coolant temp and IAC sensor are a good thing to change also for idle issues
I’m pretty sure those are next. I started it up yesterday and it won’t idle for more than 10-15 seconds before it starts to stumble and stall. Thanks for watching and thanks for the heads up!!
Great walkthrough. Thank you for all the explaining, recording and posting it.
Thanks for watching!! I’m excited to get this one on the road again!
Yes, great progress, and the correct diagnosis of the non-start issue related to the ignition switch. Can’t wait for the second part.
Lol the camshaft!!
I wondered if anyone would catch that LOL 😂 Thanks for watching!!
Now i am looking at your video in 4K before i just watched it in full HD but now i toke screenshots and enlarge it so i can see the details it was really helpful see what is under the fender and i see a gap there at the corner under the hood hinge where is a space there water can get inside the cabin i see no sealer there i think there is where the water gets into my car ....
The bolts for the hinge have sealant on them also. Other than those and the intake for the HVAC I don’t see any other path for water to get in.
@@GlovedUpGarage i have some seems they are open like in your video when you show the car without the fender , I am planning to seal them with silicone , under the dash it is impossible to find the source of the leak because there is a liner all over covering the metal . so like you said there is not many options for the water to enter. Door hinge bolts, also bolts on the top there is 3 , wire harness goes to the door , and the seems from the cap it has little taps they being folded over if you look closely in the video , all the bolts are sealed so they are out , the wire harness is not broke and the water is coming from above so that is ruled out as well , what left is the seems .. Do you have nay suggestions what else could be ? Also you think silicone is a good idea or i should use like a roof mastic similar to the factory stuff they used under the hinge bolts that stuff does not get hard stays kind a softish .... I also was thinking to use spray foam but that is not really waterproof so maybe over time will leak , but that would be easy to apply just spray into the area. I have no leak on the passenger side because i have resealed the fresh air inlet! So that side is dry now . Thank you for your time and any advice welcome !!!
@@summerforever6736 I can’t see any other way for the water to get in. Did you check the sunroof drains if you have one? The tubes run down the a pillars
@@GlovedUpGarage car don't have sunroof Thanks!
@@GlovedUpGarage how is your town car doing?
at 10:54 in the video where is the seal is there a joint under it?? on the metal? by the hood hinge on the right of it ?? there is a seal is there a joint under it so if the seal is broke water can get in? Thanks!!
i have water dripping into the foot area try to find out where is it coming in from that is how i find your video so i can see what is behind the fender .. all those places where is a sealant there is potential for water to come in .. it is hard to pin point it .... any suggestion ?? I have used the borescope and i see the drips from above but the borescope is not thin enough to get up there where it is coming from ... I am thinking to use a smoke machine to see where the smoke escape around the fender.... it is not coming from the hood release cable also not from the cable grommet from the door either . it is coming from above all those bolts are watertight on top i have checked .... it is pain... I have a feeling one of those sealer joints leaking
You're going to have a killer set-up with the 72", the hutch, and those two end lockers. Congrats!!
Thanks!! I’m definitely looking forward to it. Thanks for watching!!
Literally just ordered the exact same setup in white! Very nice
I’m excited to get this all put together!! Thanks for watching!!
@@GlovedUpGarage only thing I might get is a set of caster spacers to bring it up a bit so I can use the hutch more comfortably
Correction here brother, the other models are not the same height due to different casters sizes being used depending on the model....they could possibly be modified to make them match but they are not out of the box.
I missed that part about the casters on the smaller boxes, they aren’t cheap either. Thanks for pointing that out. I’m still very pleased with the box. Thanks for watching!!
Are you based near NJ I am looking for a mechanic with marauder experience
I’m in North Central Kentucky. That’s pretty far from me. I’m sure you’ll find someone up there who can help. Thanks for watching!!
Stunning colour Sir you did a great job really loving these mustangs cheers from Down Under
I wish I could take credit for the paint, that was done long before it arrived here. Thanks for watching and cheers!!
I love my 23" now that we figured out what that annoying clunk was coming from the front end. It took two trips to the dealership and a loaner car, but I got it back and while they were removing the right front strut for replacement they noticed the upper bearing had separated. So they installed a new RF strut, upper bearing, strut mount, and did an alignment. Reading through the invoice it says “Found SSM 52405 for front strut noise and vehicle falls within build date of SSM criteria" So Ford is aware of this issue somewhere along the line. I know a lot of folks are experiencing this same issue and no one seemed to have a solution I could find. Except that the dealerships were telling them it was normal. DON'T buy that crap if yours is making what sounds like a strut or ball joint noise from the front end!! This SUV runs like a bat out of hell, especially in sport mode. It has a stiff ride and handles like a go cart instead of a 4600lb SUV. I'm doing the ST Experience in Asheville next month and can't wait to run the piss outta one these that I don't have to worry about fixing later ;)
I’m getting some clunks somewhere but I’m upto 86,000 miles now. It’s going to the dealer in two weeks for a trans issue and the normal bad cats. I’m still loving this thing and it’s worth every penny. Thanks for watching!!
@@GlovedUpGarage Mine will be long gone before 86K, but it is more fun to drive than anything else I have ever owned.
I got the system installed last Friday. Drones like crazy, anywhere below 2.500rpm, simply unbearable for longer trips and the sound overall seems very cheap actually. Not sure if my system has a damage but I will try to return it. The customer service just told me I should talk to the exhaust team since it has been installed already. I waited 16mins in the line until I gave up and called service again. They told me expected waiting time would be around 30mins... not for me. Just wrote them a mail, waiting for response.
I’m starting to think my system has a different muffler or I’m extremely hard of hearing. Others have now reported their muffler lost packing and got louder after time. Mine has stayed the same. I measured decibels for another member of the ST groups and found my system was noticeably quieter than his. I hope they make it right for you, my experience has been a good one.
Has Ford found a permanent solution to flex pipe rattle?
Not that I’m aware of. I think they are only replacing the failed parts under warranty. My cats are on their way out now. So we’ll see how they handle the aftermarket exhaust.
I have an 88 notch. My current project. Great find.
Thanks, and thanks for watching!!
Hi any updates on the mustang? Cant wait to hear it running , awesome car , love the red interior in these!
Not yet. I have been sick the last few weeks, I’m just now getting back to normal. I’m waiting on some parts to arrive as well. I will have an update as soon as possible. Thanks for watching!!
When I was searching for my Marauder I wanted a blue car. I didn't find one. I found a few black cars but didn't want that color. I finally found a DTR car and I am very glad that I did. It is very beautiful. I often open the garage door just to look at it.
Congrats on finding a DTR!! Thanks for watching!!
Just saying, I don't see much rust on KY cars, I am in bardstown. only reason they get major rust is because of them not washing salt off. even the salt isnt that bad as its mixed with sand.
I’m seeing a lot of rust from cars that were in Louisville, probably from the salt used and not being washed. My SSP is from Louisville and it’s way worse than this one. Thanks for watching!!
@@GlovedUpGarage that’s cool, I looked at a Jefferson county car it has no rust, my girlfriends father ended up buying it about 8 years ago now. I have a 86 Utah ssp I’ve been trying to sell.
Not cheap at all if its so rusty worried about tow truck causing damage just by hooking it up its rough and not running you didnt get ripped off but not a great deal IMO
I figured that would be a good test to see if it’s still solid enough to drive. Thanks for watching!!
You’re Welcome I flipped a 1991 Mustang ssp FL ex trooper sold on ebay over a decade ago Ive flipped over 20 a while years ago sold My 1993 red coupe to a guy named Alex Corella Miami firefighter hes made it a reliable mid 7 second car its still racing todayone fastest fox body in Florida
$4000? That car needs parted out with the amount of rust you can SEE let alone what you can’t
We’ll see what happens once it start working on it. Thanks for watching!!
I’ve owned 31 different Mustangs and currently own 2 Foxes. One is a 91 GT that’s headed towards Fobra status, and the other is an 85 Coupe. Based on the asking prices I’ve seen on these lately, you STOLE that one. Good luck on your project !
I was kind of thinking the same thing. Watching the market go crazy over the last few years, I cant help but think how rich I’d be if I held onto all the cars I sold and cashed out now. Thanks for watching!!
Gonna need to send you a set soon.
Just let me know so I can make time.
Did you spin the engine over?
Not yet. I’m hoping to get some time to work on it this weekend. Thanks for watching!!
LMR or CJ Pony for parts?
I use a mix of the two. I’ve had a couple issues with CJ. I recently saw NPD is selling fox parts but haven’t tried them yet.
2600 bucks is great
Overall in many ways easy to fix and fix up to shine nice.
That’s the plan for now, just enjoy it and do some minor work as the budget allows. Thanks for watching!!
You can tell who the prices have gone. I used to be able to pick these up all day long for a grand. They are popular again so it should.
I’m sure most of us who wanted one when we were younger and without the finances to afford one have now reached a point where they can afford them. That and the popularity have increased the value. Thank you for watching!!
Yes sir. The funny thing is, they call it a mid life crisis. We call it financially able to afford now lol. I am currently do a Ls3 swap with my grandkids. It's a Ls3/6L90E swap in a 03'Crown Vic Police Interceptor. I wouldn't ls swap a foxbody, but I will a Crown Vic lol. I started making videos for my grandkids and they started to want to learn and help. I am having alot of fun with them. Grandma has gotten in on it as well lol. Now it's a family project. Are you going to keep her stockish and just restore her or are you modifying it?