วีดีโอ

- normal Hikvision NVR + AcuSense supported cameras = motion detection alarm, cars, animals, trees in wind - normal Hikvision NVR + normal/no supported cameras = probably no detection - AcuSense Hikvision NVR + normal/no supported cameras = limited motion detection alarm, maybe not accurate or missing functions... - AcuSense Hikvision NVR + AcuSense supported cameras = smart motion detection alarm, facial recognition, count cars... - AcuSense Hikvision NVR + AcuSense/ANPR supported cameras = extremely smart motion detection alarm, facial recognition, car bike plates reader...

Hi mate, Any way to contact you? I’m looking to start my own CCTV business UK.

Hi HikGuru, I'm in Australia- our eaves are 6-9mm fibre cement, what screw or fastener do I use to hang cameras off that? In your videos you just screw direct to the eaves, I don't know what eave/soffit board you have in the UK

Hello Guru, I have a problem and hope you can give me some advice. I’m using the Hikvision DS-KIS701 intercom system and have installed the Hik-Connect app on my iPhone. I’ve set up the intercom system in the app and can access the live video feed. However, I’m not receiving any push notifications on my iPhone when someone rings the doorbell. The app is allowed to send me notifications in the iPhone settings, but I’m unable to activate the permission within the app itself. I keep getting the message "Unknown error (50047), operation failed." I hope you can help me. Thank you very much!

If I have to change my router, Will I have to set up everything all over again

Have you fished a cable from ground floor story all the way up to loft before?

Hi.. wondering if you are able to help? We have a Hik-Vision NVR and 4 cameras. All 4 feeds coming in. However as more people have started using the Live View we are seeing issues that not all users are able to see the feeds. Initially we had about 4 users, but now we have 6 or 7 we are seeing issues. I am wondering if I need to set them all to use SubStreams? Great content.. and working my way through your videos 👍 *Have sent you an email 🙏

Bro he’s just smashing his phone yes it will get the moisture out but the phone will be broken

Hi, don't suppose you know anything about pro control + ?

What about the power to the camera? Is that coming through your Ethernet cable?

Thank you for the video. May I ask, if you use a second drive what format should the drive be in? Ntfs, fat32 or what? Also, if I clone an existing drive in the NVR to a larger drive. Will it just accept it seamlessly?

Where can you purchase the 2 cables My hard drive came with no cables or have been lost

Great video and very comprehensive.

CAUTION: Firmware updates MUST be completed sequentially one after another, not skipping any versions out. This instruction is given directly by Hikvision technical support themselves and the reason is because skipping firmware versions can break core functionality. Upload each one in turn - even if there are 10 of them, don't miss any!

There were no obstructions behind the brick wall, that you can extend the cables straight to the attic? What is holding the wall to the building?

Does this support any other browser besides IE which went away?

Thankyou so much , all sorted ✔️

What a mess

Feedback: you go through things quickly.Kindly slow down. i installed acusense cameras and with 8 ch 7600 Series NVR. everthing is fine. But i dont get notifications on my phone. Also.I want to see alerts on my phone. My cameras has got lights, alarm and speaker. i dont want neighbours listening alarm and sound. which VCA mode i should be using By camera or NVR.. Apologies for hassle.

hello again hik guru......i have a new annoying problem if you could help..?? ive unplugged everything and moved my hardrive box and screen to the loft and when i turn it back on my phone is now not finding it i thought i might have to rescan the QR code but didnt want to do it yet incase there is a simple thing im missing..?? phone is just saying "device offline please check its network connection".....grrrrrr

13:31

Thanks great video. Very helpful. As I'm IT guy I get calls about absolutely everything. In-laws have had visitors and they have completely messed up and apparently no video signal is showing at all. I'll be using the information in this video to go fix that tomorrow! So thanks. But just wondering if there maybe something they have done to the device that may have caused a no video scenario that you haven't covered in this video? And if so what could cause such a situation?

Please help me to reset the camera 2CD1123G0E-I

HI

HI PLZ HELP me fo reset camra 2CD1123G0E-I

Love the video

Hi i have a question. I connected nvr to 1 port of my company network witch. Now to use another network series to avoid using all camera same IP series how to configure ip addressing in nvr

great tips

Hi - your videos have great content and extremely helpful. Can you please do a tutorial on the DS-7608NI-M2/8P model. I am a little stuck when it comes to configuring - i.e. I have two 4tb hard drives in the NVR, however, only one is displayed. Also, the verification code is not showing when I am following network set up. Your expert assistance would be most welcome. Thanks

Many thanks for this valuable video. Be sure, you are international helper! Thank you again!

I have a 2 story building, would this work? I live in USA and worried if I might encounter a fireblock. Also the crawl space is very bad at my place, barely could access the corners of the building from the attic. Would appreciate it if you have any advice.

Chris helped me so much. People like you are so hard to find, but grateful for having found you. Thanks for everything you did!

Hi! Hik Guru.Thank you for taking the time to share this Video. I've one question. Is it a must to have a router and internet connection to get a remote view from other location ?

When I try to upgrade my camera this way, I get an error stating: Error! Failed to retrieve upgrade claims

Hi! I'm trying to find out how to disable the orange thingy in the top right corner of the screen. I can't seem to get the answer to it.

Hey - how do i rotate the camera? - i have tried logging into the NVR > Image > but theres no mirror/flip option

OK Mr guru im back and have some questions about a couple of problems im having So i linked up one camera to the nvr indoors and then added the app to my phone and got the whole thing working nicely with sound and 2 way audio once that was all working nicely i then bolted it all to the outside of the house and added a further 2 cameras to ports 2 and 3 all 3 cameras work on the nvr and are connected to my phone BUT the first camera i set up indoors works fine with audio of whats going on outside coming to my phone.........but the 2 cameras i added on ports 2 and 3 dont have any audio to the phone i can get 2 way audio on all 3 cameras but i cant hear whats going on outside on cameras 2 and 3 and funnily enough they also dont seem to want to put the spot light on full brightness either ive tried turning audio on at the nvr and desktop screen and ive also turned on the audio button on my phone but no joy would adding those 2 further cameras after getting the first one running be anything to do with it as it is those 2 further cameras that are playing up..??

When you clicked back into nvr web page and selected event and set the intrusion detection zone you then clicked on notification but why didnt you click on the light and audio links for that camera? I know you logged into that camera on the previous web page and selected the warning and flashing light but why didnt you tell it to flash and give audio warning in the nvr web browser page? Also i dont seem to be able to set the brightness or volume of the message. Every time i lower each one from 100 to say 50 and click save and go to another camera and then come back its set at a 100 again. What am i doing wrong?

Thank you for another great video. Just a quick question off topic but i see you used an i series nvr but when you logged into it you didnt have any problems going to live view. When i go to live view on mine using microsoft edge i have to use an internet explorer plugin and then have to click on my first camera and then change it from main stream to sub stream and then click on start live view otherwise i get live view failed or i cant see the camera picture when trying to set up intrusion areas or lines under events. I thought Hikvision would of sorted this but i have just downloaded the latest firmware and its a lot better but i still need to use the internet explorer plug in. Have you found a way around this?

Is cat5e 'good enough' (external? Ive been exclusively usihg cat6 but im now thinking im wasting money.

This is legitimately the first time i have ever subscribed to a chanel. Ive been tasked with installing CCTV for our business and ive up to 40 sites and offices to do this year, your videos have helped no end and i owe you! Thank you mate, top notch

Great video! Is the molex connector you're using a normal female connector or is there a special one you have to buy with the clip to fit right? Thank you!

Hi sorry. Me again. Hes saying you can only set up for human or motion on 4 cameras is this correct. Or is it because the 2 he is now saying he can't add to motion detection are the 2 non hearing cameras. He's saying he can't add the 2 non earing cant be added to motion detection even thought they worked before .

Hi. We have had 2 new cameras set up which are listening cameras along with 2 old ones . We have a total of 6 camera and guy is telling us he can't set up motion detection on 2 non listening cameras now . Is it something to do with the cable or old cameras not compatible with new cameras .please help spent a fortune and its not right.

how to get the NVR screen ? please assist

I’ve always been told to never drill into the mortar and brick instead.

Always worth doing a ZS test at the junction box before fitting the light.👍

Sounds like you’ve had a sheltered career 😂

Great neat job thanks !

Can l have a sample pls