วีดีโอ

Thank you for your comment. Microwave capacitors will also work but the parameters of the MOT CAP may not be optimal. The capacitors used in this video are 1400 VDC 20uf X 2 welding capacitors in series to make a 2800 VDC 10uf capacitor which may NOT be the ideal choice however they are good for my experiments with such high voltages.

Thank you for your comment. Yes the wire I use is speaker wire, it is multi strand copper wire consisting of 24 strands of 0.20mm wire creating a cable(wire) thickness of 1.2mm surrounded by a clear insulation, possibly PVC which is import for the dielectric field. The total diameter of a single multi strand cable plus insulation is 2.4mm. Therefore the total width of the two cables in the figure 8 speaker wire is 4.8mm wide. Aluminium must be avoided because of its dielectric properties therefore copper aluminium wire would probably not work, there is an exception to this rule if the aluminium is focused to allow us to benefit from the negative effects of aluminium.

Thank you for your comment. Couldn’t agree more, if there is even the slightest deviation from his original design then you have created something else. The problem here is researching Tesla’s discoveries without the drip feed from one of the world’s richest men. A lot of the time I build my version of Tesla’s work from what scrap I have as opposed to specifically buying something, all the while keeping in mind that this isn’t the same and with the intention of making the same if it’s feasible and based on results from my version. Most of the time I’m guided by my desired outcome over replication, ie. I want a particular light to operate at it’s most efficient rate I will take the Tesla concept and tailor it to my needs, if I can achieve it without the extras then all the better. Again I will highlight the importance of your statement, when he says something is important, I listen.

Thank you for your comment. Well there is some familiar stuff in there! Thank you for sharing.

Thank you for your comment. Sorry for my delayed reply. I am indeed Australian, I have 240 volt mains here however this circuit was created a long long time ago, in a galaxy far far away🤣(sorry my filter wasn’t on the keyboard) I used this circuit when I lived off grid to send my solar over long distances through earth to run a 240 volt LED light. So you are correct it is basically a SWER system. I’m sure I don’t need to tell an electrician to be careful with those MOT’s, I connected this circuit to my large Tesla coil then into an MOT and got a one inch green arc to earth which welded the side of the MOT, I’m jealous about the MOT’s you have, I’m currently considering dismantling my kapagen to do some other experiments. It’s amazing when the frequency is correct. P.S. I don’t recommend doing that unless all precautions are taken. Thanks for watching

Thank you for your comment. Sorry for my delayed reply. I agree with you, I often find it’s a combination of admiration and astonishment of just how easy it is. I believe Tesla wanted us to know it was easy but the establishment created mysticism around electricity then placed Tesla on a pedestal as an untouchable magician. The very opposite of what he intended. I tried a Darlington pair arrangement on an earlier design, it was a very long time ago so I can’t remember much, however I do recall thinking about testing the Darlington pair more as I don’t remember being impressed which usually means I didn’t research it completely. I initially got the idea looking at an audio amplifier ironically using the 2n3055 transistor so we know that transistor copes within my circuit at least. This is one of the reasons why we need other people experimenting, I will release some more videos soon with helpful tips for people experimenting in this field without having to spend big to play, I’m also winding a coil for the people using 110 volt lights as a large percentage of my viewers are on the 110 volt setup, just waiting on light bulbs to arrive.

@@GuardianEngraving Thank you for your comment. Sorry for my delayed reply. The 2n3055 is a favourite of mine, I used it on my very first Bedini motor.

@@whatifididthis...1236 all good mate, and yeah me too, i bought a stock pile of them lol

@@michelmorel9208 Thank you for your comment. Sorry for my delayed reply. I strongly believe the only way we the people win is by making knowledge free and as you say it just takes 1 person. A problem for “The People” has always stemmed from greed, the inventor wants to be paid like everyone else, but that is what makes the inventor a threat, the opposition to their monopoly. We have been taught if it was cheap or free that it is no good, I believe we need to return to the best things in life are free!

Thank you for your comment. I have been meaning to ask if you wouldn't mind performing a test for me on your ringer setup. I am still waiting on parts and would like to have an as close as possible replica to perform tests on but it is bugging me so i have to ask. With my circuit, I realised a long time ago that getting aluminium too close in the WRONG position will drastically effect the magnetic field of my circuit and if operating a light it will go very dim. In my mind I'm trying to understand if your ringer has a similar effect and whether or not it is negatively impacting your setup. It is hard to imagine more power but hey if it's there well we may as well take it.

@whatifididthis...1236 yes i can test it with it elevated off of the aluminum plate :)

@@MTECHINDUSTRIES2022 Legend, thank you.

Thank you for your comment. You can do either/and/or. In this particular setup it is wound directly on top of the 180 turns. This then allows you to insert a ferrite rod if you wish to by inserting it into the main core of the circuit. The ferrite is only necessary to operate lights of different frequencies or higher voltages, which is the other purpose of the ferrite rod. You can choose to apply the second earth to either the bifilar turn atop the 180 turns or to the 339,961 patent bifilar winding that is wound directly on a ferrite rod. My circuit does not really care where earth 2 goes as it is attempting to mimic the SWER system, Single Wire Earth Return. In this case it is attempting to return to source.

@@whatifididthis...1236 Awesome, thanx for the quick reply.

Thank you for your comment. I will make a point of this in a video soon. Don Smith was cryptic but if you were patient and possibly autistic combined by obsession you would end up like me. When watching Don's videos you have to look at when he smirks, read his body language, he is trying very hard to say things without saying them. He was this way because he had no choice, to live he was told what he can't say. What I heard him say, without saying it, was light bulbs are resistors. The bit where he talks of a research company spending thousands of dollars on massive resistors and shows a picture of them, watch him smile at this point. Most think he is smiling because we could never afford the expensive resistors, did nobody notice he doesn't use expensive resistors but always had plenty of light bulbs at hand, the old type, 100 watts, does anybody remember him say those light bulbs were special ones? What do you mean special Don? "Oh I had them specially made" .... what, who has special light bulbs made for them? I currently have a modification of my circuit on the bench that I will record and show how to select the right light. I'm reminded of the master alchemists in this situation, they taught me to read between the lines and see the light that does not shine, the masters always spoke in riddle for this knowledge is not for all of man but for those who seek the purity of the light. We must learn to read between the lines for what resides upon the line is a deception. Tesla knew these dark entities existed and knew they would always exist, for without evil there is no need for light to shine, he and others have tried very hard to keep this from "them" which unfortunately has left us to decipher what essentially is code. What did they NOT say?

@@whatifididthis...1236 the beauty is, using incandescent bulbs you can measure their resistance … I don’t want to say more things which I can’t prove due to lack of resources … actually I am somehow ashamed of my failure on this attempt to replicate your circuit … I have been absolutely mindless and careless when I built that coil, but all I can say it will work with cheapest wire available CCA (copper clad aluminium) multi strand provided we don’t use less than 2.5 sqmm. I totally agree with what you say .. I have arrived at same conclusions. As long as there won’t be any silly action or patent attempt we might be OK for low level. I am watching some online forums and is amazing how out of blue someone comes to twist and thwart any clear initiative leading in the right direction. I have learned that is necessary to back up. I wonder how could possibly end up a youngster whom may get 1-10k orders for something that will get some trouble at some point with supply chain and if miraculously manage, that suddenly 1-10k “happy customers” want to return their products all at once invoking various motives ? I learned this watching dr Holocomb journey. Many similar coincidence can be found in history more or less recent. You mentioned there are many ways to connect transistor, indeed: it can be used for amplification, for switching or voltage/curent regulation … in patent 336961 this transistor is represented by commutator with 3 brushes but in canadian patent of the same, there is a Darlington arrangement represented by a double middle brush … 2 stage amplification. In order to be able to replicate in full your setup I need to know on which connections I need to start tuning. I have understood your methods of tunning and I am able to do it once I know in which mode I need to start. Probably would be best to start in switch mode not to blow up more transistors and guess I can change connections as needed once everything is up and running. Also, I have done many tests with pancake coils setup you kindly shared and there is many other things to explore further. If you remember I asked why not equal length of wire ? I have wound another set a while ago with all equal dead measured and the power available is increased a by little, power drawn increase as well a little but frequency and voltage is stable, no variation … for less power available at output, input can be decreased substantially when distance between bifilar with zvs and rest of the coils is adjusted … and many, many other things.

Yes, I have arrived to the same conclusions, be safe 👍🏼

@@Caesarus2011 Thanks for your concern, I am always super careful but mistakes are easily made, I got another RF burn last night, bit of a fumble fingers situation. It is such a different feeling that feels like a bad sun burn but strangely heals very quickly.

Thank you for your comment. The burns I get if I accidentally touch the wrong spot are a combination of RF and Radiant energy and electromagnetic electricity and probably other stuff we don't know anything about but it feels like no other burn I have experienced. Somewhat damaging to tissue at the burn site and has an effect that feels like numbness. On my pinky finger I have a matchhead sized area that got hit, a small black entry and exit would were visible(now gone) but it is as though it cauterised a small section. It will get better, I know because it has happened a few times before, note to self, must be more careful! I have thought many times why the turns ratio doesn't really conform with a standard transformer, eg 20 turns isn't equal to 2 x 10 turns, ie. the output value of 10 turns is not 2 x the output value for 20 turns. That is difficult to say and perhaps better described as non linear which I feel isn't just a resonance factor. This circuit you speak of interests me, any chance you wish to elaborate? If so feel free to share all you like here.

@@whatifididthis...1236 Ouch, those do sound painful >.< Do you have an email I can contact you through? YT tends to shadow ban my comments with detailed information, otherwise you can find me under the same username on on other social media or my email on my channel.

@@Caesarus2011 Thank you for your comment. Well that is good news, I never quite understood why they use the standard copper earth rods, it’s just not a good weathering metal. Zinc makes perfect sense and any home built here before the red tap babies were born ifs built with the zinc plated steel pipe you mention, still looks exactly the same 40 years later.

@@Caesarus2011 Thank you for your comment. The capacitors that I’m using are for high voltage tests and are not necessarily the correct capacitors and you should do as you suggest which is tailor the capacitors to your requirements. The 2N3055 isn’t the only transistor this works with it’s just a good cheap and strong transistor that can cope with 5 amps continuously. You can use any battery from 6 volt to 24 volt but 12 is safest for the transistor as it is already way over it’s rated voltage. I don’t recommend connecting anything to my circuit that is connected to the mains system like the laptop charger, even if the transformer is an isolated one. As we have seen with this circuit and similar circuits they are able to inductively couple using radiant electromagnetic and dielectric fields meaning they don’t care whether something is isolated or not. If my circuit chooses to bypass safety measures it may not be pretty. Can I suggest you use a cheap solar controller that has an auto disconnect on low voltage as this is the cheapest way to protect a battery, my circuit will run right down to 5 volts so it will kill a battery if given the chance. The coil length requires extensive testing to meet perfect resonance which changes with every modification. A good tip is start out with a short L2 and if you don’t get the result you want just add another layer of turns. You may find the turn per volts ratio is somewhat out of whack for example one single turn on top of my circuit will operate a 1 watt 3.2 volt LED blindingly bright. PVC pipe will work just fine, don’t worry too much about the perfect core, I have wound this on a few different forms now and it doesn’t make too much difference either way. You can use old CD’s as end plates for your PVC pipe. Alternatively you could take ten times longer and use quick setting glue to keep turns in place on the edges then place tape over the final winds. I agree that the neons act as a limiter, one just has to decide what your willing to sacrifice and for what outcome and we are somewhat spoiled with choices. The Kapanadze is one of many circuits I believe are responsible for my understanding of these systems but the Kapanadze was somewhat of an aha moment for me and I hope I can find time to pull that back out soon.

@@whatifididthis...1236 not sure what I did just few minutes ago testing but on first run, bulb didn’t lit up, transistor got hot pretty quick frequency went over 148 khz not constant with variations from 40 khz to 180 khz, power drawn shown on battery meter variable 20-38 watts … frequency have gone into the main at +164 khz backward. Disconnected after 2-3 minutes with safety concerns. I took out battery meter, using same connections, now frequency is 50 hz everywhere in the circuit, input from charger is 20.53v measured on battery meter and additional with multimeter, output is about 68 v AC 50 hz … obviously no bulbs can lit up. Fitted back battery meter and now shows up all as second run … transistor is in heaven now, 10 more to go, hopefully not all with the same fate. On your old circuit I can see high side runs straight into transistor base and light connected on low side … on this diagram, light is on high side then into the ground and low side into transistor base with additional 9 turns bifilar on top of main coils and output to capacitor … I am getting confused now and ready to fry some transistors to check out different connections … yet I have to stick into the ground second rod, but first I want to make sure the main circuit is working correct. Looks like I need a 12 v battery as I am a bit scared to blow up something in the house with that high frequency injected backward. I don’t know what was in my mind when I’ve made this coils, i measured bifilar length but somehow I did not measured the length of monofilar secondary … trying to make some guess work or just redo the coil. I thought can find out the length measuring resistance, 1.4 ohms for monofilar … but bifilar shows up 0.0 ohms … need a more accurate instruments which I don’t have.

@@Caesarus2011 I wouldn’t use anything mains connected with my circuit. I have seen one inch green sparks coming out of my circuit when it was connected to an MOT, then the fuse blew inside the mains charger and instead of turning everything off it gave it unlimited access that began to arc weld the earth wire. WARNING DO NOT CONNECT THESE CIRCUITS TO mains EARTH THESE CIRCUITS HAVE UNKNOWN POTENTIAL THAT FEW OF US ARE EDUCATED IN PLEASE BE CAREFUL Can you give me a few more details on your current setup and we can try to save a few transistor lives. Also don’t stress about the confusion issue, it is because there are multiple ways to connect it. And you will blow up anything in the house that gets energised on that negative line, every item on the mains will communicate with this circuit, trust me things will die. I learned the hard way. This is the one rule I apply to this circuit, if I’m not willing to lose the item I want to test then I don’t connect it. Some things go crazy on it!

@@whatifididthis...1236 oh, I am using a separate ground, only power supply comes from the main via laptop charger which I just discovered do not have ground connection ( pin socket for ground is made of plastic just to allow socket connection). Not sure what else to say about current setup ? 2.5 sqmm speaker wire, bifilar 10 turns + 200 mm each end for connections total length 2270 mm, secondary wound on top of bifilar 20 turns per layer, 11 layers + 200 mm each end for connections. Connections: positive to start of bifilar, end of bifilar 1 to start of bifilar2 then into collector. Start of secondary to base, negative to emitter, end of secondary (high side) to the bulb, the other connection of the bulb straight into ground.

@Caesarus2011 and the type of bulb is?

@@Edmorbus Thank you for your comment and thank you for watching.

@@Edmorbus Thank you for your comment. I have removed the ads from the end of the video for you. I don’t currently have anywhere I could upload a file but let me know if you need more than the schematics at the end. Thanks for watching

@@whatifididthis...1236 Thanks

@@johnkoury1116 Thank you for your comment. I’m not sure he would approve of me discharging that capacitor like that, I imagine he would look down at me whilst shaking his finger. 🤣

@@joeeasygo Thanks for watching.

@@joeeasygo Thank you for your comment. Nah, I’m sure most have seen this all before, one reason they might not have seen it, that I can think of, is they aren’t old enough. When you’ve been running this treadmill for long enough it all just seems like the same thing done a different way. I don’t normally detonate the capacitors like that, too many things go RIP but every now and then you gotta have a little fun, besides there’s nothing like near death to remind you your alive. Recent tests trying to find the limits of different arrangements has destroyed a few things though, I will make a video when the new parts arrive because it smoked it all so I just need to discover it’s reliable mode because cooking things isn’t necessarily what I’m after. I have another modification coming for my circuit, I haven’t tested it yet but I listen intently to my intuition and it’s been bugging me for a while now to try it, I hope it works, I think it will be pretty special if it does work. Thanks for watching.

@whatifididthis...1236 I am trying to figure out a cap dump circuit to charge the batteries

@@milesjargon Thank you for your comment. The Primary is 18 turns bifilar wound(side by side) therefore it is 9 turns of a bifilar wind. The secondary is 180 turns single wire. Insulation on wire and wire should be the same type as the primary wire for dielectric capacitance. The 3rd winding in this case is the 10 turns that lay on top of the 180 turns. So there are only 3 coils in this circuit but I had to draw it that way in the schematic because it is important that the primary is looped back for a second run. If you check my channel for my tutorial videos it is a little clearer.

@@whatifididthis...1236 Thank you that makes a lot more sense now. I will check out your other videos too for clarity.

Thank you for your comment. I have read the Patents in full and encourage everyone to do the same, however most people won’t. It is similar to a user agreement which almost nobody reads. The point I am trying to make is how easy it is to achieve the same or similar outcome by just reverse engineering from the pictures. This is for those not interested in working it out for themselves.

​@@whatifididthis...1236 but what does the use of this winding here have to do with an auxiliary brush on a generator that's tapped on its field winding? The patent is for modulating the voltage of a spinning generator.

@@blahblahblahblah2933 Tesla hid information in various ways in his work, the purpose of the machine in the patent is not the only purpose it can be used for, and that was intended when Tesla made it.

@blahblahblahblah2933 That is correct, however this is only one use of this winding method. This coil arrangement, from my actual experiments, seems to display an output that doesn’t appear to place as an equal load on the drive coil as other coil arrangements and it could be this fact that Tesla chose this method. It is important to remember that this era involved the Patent Wars, where every man and his dog were submitting patents with minor variations. Whilst some are clear copies with a small variation they still presented a benefit that the original patent did not supply. This can be a minor variation such as back seats in a car instead of a 2 seater car. My point is, Tesla would often use Patents to protect his other ideas without submitting a second patent, some of his patents contain multiple inventions which was often as organic as “I’ve made this ‘thing’ and now I need to invent something that lets me use it”

@iamatree4246 Thank you for your comment. I think it is important to have a goal in mind, I have tinkered as you say but with a task clear in my mind. Achieving something without knowing what it was you were trying to achieve is without merit. In my case, I wanted an effective/efficient light, for me this was practical and achieved. First you must decide what it is your looking for.

Thank you for your comment. God bless you also, happy to share the light. What language do you speak?🙏

Thank you for your comment. I agree that MTech has done great work and for that he deserves credit. What I was trying to get at is we shouldn’t be selling this stuff, there are very powerful institutions and laws that forbid it. In my opinion if we were to align to form a group of alternative energy researchers that educate the public we could finally get somewhere, us, we, the people! Instead of building an army of negative people that purely come after you because your selling stuff, it isn’t worth losing another researcher of MTech’s calibre. I also agree that the fools that scream through their keyboard for free hardware are absolutely starved of oxygen. Mind you those same people probably just took a break from one handed lubricated internet surfing in their mums basement so… I prefer the engineering approach, I come from a family of engineers and I have come to realise we see things that others don’t seem to notice until pointed out. Still make mistakes but I try to learn from them. I thought it was very cool seeing Iron Man’s holographic blueprint builder in the movie as I was finally able to show people something similar to what I see in my head. Apparently Tesla preferred that approach also and he had stated he didn’t want to draw it on paper because he had already refined it in his head, to put it on paper was merely for others to understand it. The best way to experiment with these things, IMO, is to build the device as close as possible to the original, confirm the statements made then begin evaluating all roles of individual components and begin the “what if” experiments of removal or substitution of parts. This is what both myself and MTech and others are doing. I have been through every one of Tesla’s patents and know we all are using his work, in MTechs case, this time, he has “engineered”(copied, because that’s what engineering does) Lasersaber’s Super Joule Ringer then applied the “hit-and-miss” approach and experimented ((this is the bit that deserves credit)) then applied an engineered design in the form of US Patent No. 336,961 and this is what we all should be learning, that we can ourselves take these items and obtain something better than what we’re told. Don’t get me wrong, I like MTech, I don’t see his channel as an adversary, if anything I would argue I am trying to protect him which has been indicated by me asking him not to earth ground through the grid with Tesla coils in the past when he first started his channel as I nearly lost my life doing similar things. Thanks for watching, sorry for the essay response.🤣

@@whatifididthis...1236 Thank you for the insight! I agree on every point. But I'm not an avid fan of MTECH, he just gets too much like ol' Don Smith, the guy that had to get the money, be the next J.P. Morgan or something, and got nothing! The writing on the wall is getting easy to see, either we the people, learn how to flow power on our own, or become slaves the the broker's of electrical power. All those EV folks... The only problem, you're buying all your KwH from mister local power co-op. I can share something: I just built the Mtech device with a few skews. My L1 was double, 6mH. L2 was almost spot on, surprising. My core is 25mm diameter. I ran numbers on his device and found his L1/L2 ratio was 3.58 or so. I wanted to build a 1/4 Wavelength resonator, or an L1/L2 ratio of 4, which I did. I have a precision micro ohm meter to get wire lengths just so. I just sparked it up a few minutes ago. Without the "magic bulb" from emitter to the earth ground point, it ran at 4.43 MHz, which was a sweet spot I found when I first hooked it up to the sig gen earlier. I'm trying to work out an analog to the bulb, using source-able components. So far, found a 26V TVS in series with a Schottky a starting point and the circuit took to resonating at about 2.8KHz, too low. Interesting self-oscillating circuit! L3 is pretty frisky on a cap charge. I liked some of Mtech's concept about this device, creating possible field of energy around it and possibly stimulate and resonate with local earth energy in the goal of providing battery charging. I liked your vid and look forward to seeing more!

Thank you for your comment. Thank you for your kind words and thank you for watching.

@@lektor6910 Thank you for your comment and thank you for watching. Have a nice day. 🙏

​@whatifididthis...1236 I am doing a similar setup to MTec and lazersaber ,but I'm not using bucking coil set and I've had some interesting results one of which is that I can run a bulb off the base and run the base through earth , it will also charge a battery if I come off the collector through a bridge rectifier tapping of the emitter and then connect to the bat pos / neg through the + / - of the bridge . Have you tried any of this on your system . ?

@StefBaker-gd4xe Thank you for your comment. That is interesting, I haven't yet built M-Tech's version of Lasersabers Joule Ringer as I'm waiting on parts. I have done similar tests to what you mention, so many tests that I would often forget what reactions came from which test. I know with my circuit that the load can be operated from multiple points so I was curious about MTech's variation. My adoption of Tesla's patent 336,961 with my circuit has been applied without bucking winds as you have done. Thank you for supplying your research data and feel free to update me on any other findings.

​@whatifididthis...1236 I think I'm on the same path as you , it is constant" what if " with me too. 🤔 . Earth definitely has effects on the system . Tried different setup today and got a small incandescent bulb to light at 1 amp , not good !! Think I will stick to LEDs !! 😅 I have the same problems as you , it dose something , then you go to do it again and it won't work , realy annoying 🤨. E.g . I get my system to run at 20m amps and light a LED bulb with reasonable light , move a lead to try something else , move the lead back , and then fail to get the same result , it's like something is conspiring to stop me getting results 😅 , anyway will keep you posted if I get any good results , like the stuff your posting , very interesting 👍

@@StefBaker-gd4xe yeah I find it hard to imagine I’m the only one with that research approach and now I feel more normal. 🤣 Might I suggest experimenting with a second earth as that changes the outcome again but not always for the better. The amount of times I got unrepeatable results before I realised the jumper cables were at fault, at best cheap Chinese crap, most of them I have re soldered again due to poor conductivity. Soooo frustrating before I realised, wasted hour upon hour. Keep up the experiments and please keep me posted, I don’t care if someone cracks it before me, I just want everyone to benefit.

Thank you for your comment. It is an honour to share the light and God bless you also. 🙏

@@leonreynolds77 Thank you for your comment. This circuit is my variation of Tesla’s One Wire Through Earth Transmission Radiant Electrical Generator coupled with Tesla’s US Patent 336,961 for very efficient operation of a 240 volt LED/Light powered through the earth over distances of at least 160 meters, that’s all the wire I had. The circuit can also be used to operate wireless coils and radiant energy collectors.

@@mooserov Thank you for your comment. That would be interesting, although when considering the 2n3055 is used in audio amplifiers it may end up as an audio amplifier, something like a Darlington pair of transistors?

@@mooserov Thank you for your comment. I was interested in the Theramin because it uses similar coil windings to one of Don Smith’s output coils and I often wondered if that is where Don got the idea, considering the Theramin was built when Don would have been a child.

Thank you for your comment. Have I noticed your comments being deleted? I hadn’t had time to respond and then saw another message that stated it was the second time you had tried. I think they don’t want us to be friends.🤣

@whatifididthis...1236 I have had YT delete comments before or have had multiple pop up only to then find them gone when I go stright to the video. Good old YT at its best.

Happens all the time and to all of us from what I can tell, I’m sure if pushed about it YT would assure us it’s not squashing dissent so it’s probably all good.🤯

@@GuardianEngraving I just took a screenshot of my notifications where I can see the messages from MTech but they definitely aren’t on the video. Dodgy buggers!

@whatifididthis...1236 good idea I'll have to do that next time, cheers.

My thoughts also. What kind of circuit is this?

@@maynardjohnson3313 Thank you for your comment. My circuit is a variation on Tesla’s Through Earth One Wire Transmission which has added to it Tesla’s US Patent 336,961 which allows for rapid recharge of either the source battery or additional batteries or capacitors with a very low current draw.

@@leonreynolds77 Thank you for your comment. My circuit is a variation on Tesla’s Through Earth One Wire Transmission which has added to it Tesla’s US Patent 336,961 which allows for rapid recharge of either the source battery or additional batteries or capacitors with a very low current draw.

@@WizoWiz Thank you for your comment. Thank you for watching and have a nice day.

@@ardiwork Thank you for your comment. Are you asking how long this runs or what is the voltage drop over time? I am currently running tests of all different kinds to find all of its features so I haven’t yet done straight run times from full to flat but I will get to it soon.

@@GuardianEngraving Thank you for your comment. My father went on a motorbike trip around Australia and took pics of all the amazing scenery, in nearly every single shot he was giving us the finger, totally spoiled the views. I still find it amazing how this electricity can sense your body, I usually try to back away after each adjustment to see what the real effect is because I believe a free energy device would be crap if you had to stay by its side for it to work. I imagine that is the potential difference between my head and ground, approx 200 - 300 volts so I feel it uses me as an antenna. Still unclear if that’s healthy for the body, although I was supposed to kick the bucket 20 years ago and my computers haven’t died yet after years of exposure in the same room so…🤔

@@whatifididthis...1236 Yeah I just got my self an EM meter, just have to look up what the safe levels are. If the meter was programmed with the correct warnings then I am stuffed lol one of my coils gives over 5000v/m in E field :S

@@GuardianEngravingI guess it is just electric potential with almost nothing on magnetic component. When magnetic component is activated/added it gives weight … hot electricity. Magnetic component add mass to electric field. Since I start to play with my water batteries I can detect voltage everywhere

Thank you for your comment. The human mind is a funny thing in the way it will validate something that appears intricate and difficult yet dismiss something because it looks too easy. I remember feeling this when looking at a cross sectional cutaway of the old space shuttle, seeing the 12 kilowatt hydrogen generator that powered the shuttle’s electronics and realised hydrogen production was so easy, my brain called BS but my intuition told me “put two stainless steel spoons in a bowl and connect the battery and you will know won’t you” It’s the simple things in life that are often the best.

Thank you for your comment. Your welcome good sir, thank you for your kind words, a word of warning it’s not a good idea to tell me I’m right, my ego will run away with me. 🤣

Thank you for your comment. I noticed there was a change in the windings, there are subtle differences between these coils as expected when producing different coils one must expect different outcomes but I find it interesting that Tesla presented the 3 wind methods. What rats nest?, looked clean to me 🤣🙈. I never showed my work in progress before, it’s always been some arranged presentation and now you know why. This is mostly for non English speaking viewers that are even more in the dark because of the translation factor alone. I watched a lot of European and Russian videos trying to reverse engineer circuits and they were always models mounted to a board but no schematics and I would curse them for not supplying that one thing that stops us all replicating so I figure I can’t repeat their mistakes and should supply a schematic. Thank you for the words of encouragement, I have been in this game for so long now and I can remember the difference between now and then, all these things I studied 25 years ago weren’t accepted at all and nobody was interested. I put it down to people weren’t as poor as they are now, people would literally say to me “why bother, I will just pay my electric bill”. I often wonder if they recollect that moment and see my perspective, sadly it’s most likely not the case. Cheers to looking back in 100 years!

Thank you for your comment. Seeing the coil in any arrangement is somewhat like looking at the list of things the mechanic did to your car and just taking their word for it. MTech has used Nikola Tesla Patent 336,961 and if you take a look at that patent Tesla shows 3 different windings that MTech has experimented with. When you hold the winding in your hand after making it you will have trouble not seeing the similarities. Thank you for watching.

@@Caesarus2011 Thank you for your comment. Sorry for my delayed response. That is a good idea to use a laptop charger assuming you have mains power or inverter power to run it. Another option would be to use a cheap $10 solar controller, they have a 12 volt output that is manually adjustable for voltage cutoff and if you select one with a timer function it can automatically turn off and on at set times or for set periods of time. In relation to my circuit, you need to be very careful with, I don’t recommend connecting it to anything on the mains because it will destroy a lot of things. Due to its radiant electric field it will attach itself to anything in range, it needs no concern for wires and makes the rules as you learn. It produces a very nasty burn on the skin from the slightest touch. Warning aside, I do absolutely love my circuit, it has taught me so much and made me question so much more. As long as your safe about it I encourage everyone to replicate it and be amazed whilst learning about this untaught world of electricity.

Thank you for your comment. They absolutely don’t want to share the money! All links must be their links only. Such a wanker approach from YT. Can I suggest you post a quick video, then you can put all the links you want.

The only links allowed by TH-cam are TH-cam links as far as I am aware, perhaps post a video on your channel and a link to that video from here.

@@joeeasygo Always interested in protection. Thanks.

Thank you for your comment. So I’m a little confused with your description of your setup. Do you mean you used white LED’s on both strings?

@@whatifididthis...1236 Thanks for answering. Could be that I did it wrong. I connected the big and the small batteries positive to positive and connected 2 identical loads on the negative. I believe it's exactly like you did it in this video. The green LEDs are all in parallel I guess. I used the white LED's just on one string.

Check this video at 20:45 for the schematic on how I have set this up.

@@whatifididthis...1236 I did the test correctly now. One 12v-LED-String on the positive rail and the other identical 12v-LED-String on the negative. I tried first with 15v/3v. This are Eve-Lifepo 20ah 3.2v batteries. Then I realized it needs 24v-difference and not just 12v-difference. Then I had 9 batteries on the big bank which was 29v and 9 batteries on the small bank (3.1v). Then I got 13.30v on both sides and both LED-Strings lit up very bright. And it drew 0.83a. That's 10.96 Watts. I tested one string afterwards with 13.30v in the conventional way. And it drew 0.83a which is 10.98 Watts. The brightness was exactly the same in my opinion. But this part needs to be examined further to be 100% sure. In this test it was running 2 of this identical LED-Strings with the same power for 1. It's not so efficient like the green LED. But it's huge. I can confirm it 100% works!!! The next thing would be to run a second identical string on the negative side. But I need to buy or order a third string. I think it's worth it. There is a huge potential with your finding. Absolutely amazing. Greetings from Switzerland Bern.

Thank you for your comment. Sorry for my delayed reply. I imagine you would be correct. I’m not currently working on this setup but there isn’t a day that I don’t think about it, hopefully soon I can return to testing. There is without doubt something different on the negative rail. The 0 volt phenomenon is super interesting, how can the light operate with zero volts? Anyway, I pray god gives me strength to find the time to look again.

@@whatifididthis...1236 You're right. Praying is very important this days. BRICS are 10 states now. I believe it's the precursor for Revelation 17:16-17. It can start any time. As you titled one video, "they are coming after us". But Jesus is stronger.

@@whatifididthis...1236 You're right. Praying is very important this days. BRICS are 10 states now. I believe this is the precursor for Revelation 17:16-17. As you titled one video "they are coming after us". They could start any time. And it will be 10 times worse than the horrible fake 2020-2022. But Jesus is stronger.

Thank you for your comment. The negative rail is a phenomenon in itself, it is the negative rail that carries the additional loads. Take a look at the smaller AA version with so many green LED’s on the negative rail. Splitting the positives has a higher potential voltage than splitting the negatives so a brighter light is available on the Pos+ line but the negative rail experiences the 0 volt phenomenon and can carry huge loads. So the efficient way to use this system is pulse the positive line and run your load/s on the negative rail.

@@whatifididthis...1236 Thanks for your answer. But why didn't you run the different loads in this video on the negative rail? Wouldn't have been the result even better?

@@marcelfiechter7436 indeed it would but that wouldn’t started up the haters that say that’s not full brightness!🤣 I started experimenting with this system again today and will post another video on something else I may have discovered, not willing to state just yet, often when I see these anomalies my brain sort of breaks and I leave the circuit and spend the next few hours running the treadmill in my head. It has been my experience in real life and not TH-cam life, when I have tried to show my systems to people they start to drift away. Obviously you me and all my subscribers are interested but an important thing for me to realise has been the fact that we are small in number.

@@whatifididthis...1236 Thanks a lot to answer so quick. Now I understand the differences. It's all about knowledge.

@@whatifididthis...1236 Just a thought because of the additional loads. A battery that charges up is also a load. This way (negative rail) it would be probably possible to charge up 2 or 3 or even more batteries at once with the same power.

Thank you for your comment. I have stated before I would love to pretend I was the brilliant mind that dreamt this up but that would be a lie for this circuit was a mistake. I had been intending on building a hybrid of four systems Benetiz, Kapanadze Joule Thief and a system that existed primarily in the free energy forums by a person who went by the name Big Clarence. I was busy talking to a friend about a heated topic when connecting everything up so I wasn't paying attention and allowing the ego to drive me. I finished what I thought was a normal circuit and when operated it did some things that the normal circuits don't do. I was impressed and told my friend who asked for the schematic. A while later he got back to me, telling me I was dreaming and that it did not function. Confused, I had to trace each wire and draw the connections to realise what I had mistakenly done. So I can't take credit for a deliberate design and only an accidental design and if anything I would like to take credit for doing the experiment, to point out to all that this was never in any text book and the only reason this exists today is because of experimentation over theorisation.

@whatifididthis...1236 Coincidently, I was just watching a video from the DVD documentary series Energy From The Vacuum with John Bedini who had also accidentally discovered this and it's basically a multiple Tesla switch

@@whatifididthis...1236 The title of the video is "Energy From The Vacuum: Part 38(1of2) The Tesla Switch"

Thank you for your comment. That is a great idea Max, I totally agree and this is advice given to myself by others also. My problem is as I see it, I don't feel comfortable with scripts and this causes me to drift off topic. I usually have a small window in which I am physically capable due to my disability, this couple with my off topic rants makes my video a lot more bloated than they should be. I don't like running from a script as it only enhances my somewhat already robotic persona, I'm constantly reminded of the teacher from the TV series "The Wonder Years" with his monotonal voice putting everyone into a coma. LOL I agree with you 100% though and will attempt to have this in my next video