TESLA PATENT + MY CIRCUIT = LONGER RUN TIME???
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- Welcome to my channel.
The schematic is at the end of the video.
This video covers Tesla's US Patent No. 336,961 which I have added to my circuit for through earth energy transmission. This Tesla Patent has resurfaced recently and like all things from Nikola Tesla it is very interesting and an efficient coil designed to minimize the load on the generator that feeds it.
In my opinion, this circuit will work better on power sources that are capacitors and or lithium based/hybrid LTO batteries and does not work as well with the sealed lead acid battery I am using. Therefore higher efficiencies are possible.
Shout out to other TH-camrs making content reviewing this patent.
@MTECHINDUSTRIES2022
@FaustoGomes
@joeeasygo
@GuardianEngraving
Please Like, Share and Subscribe
Don't forget to ring that bell for notifications.
Have a nice day. - วิทยาศาสตร์และเทคโนโลยี
Thanks for sharing. God bless you. 🙏👍
Thank you for your comment.
It is an honour to share the light and God bless you also. 🙏
AWSOME VIDEO BROTHER!!! CHEERS... LOVE THE CLEAN SCHEMATIC... MORE POWER AND PEACE TO YOU 🕊️👍👍👍
Thank you for your comment.
Thank you for your kind words and thank you for watching.
I agree with you about sharing discoveries and ideas regarding alternative sources of energy. It only takes one person to share a detailed construction of an energy conversion device and we could all enjoy cheap energy & light at home without worrying about electricity bills. It really is just greed that has stopped the evolution of alternative energy coming to the public. It is a requirement for our evolution to use clean and cheap energy so it will and it must happen. 😊
Thank you very much, brother.I love you work. You're 100% correct.
Thank you for your comment.
Your welcome good sir, thank you for your kind words, a word of warning it’s not a good idea to tell me I’m right, my ego will run away with me. 🤣
I can't see any similarity on the Tesla patent and MTech circuit, except for the one bifilar coil :D But good to see experiments and improvement going on. Thanks for sharing.
Thank you for your comment.
Seeing the coil in any arrangement is somewhat like looking at the list of things the mechanic did to your car and just taking their word for it.
MTech has used Nikola Tesla Patent 336,961 and if you take a look at that patent Tesla shows 3 different windings that MTech has experimented with. When you hold the winding in your hand after making it you will have trouble not seeing the similarities.
Thank you for watching.
2:45 after reverse engineering his videos I find that he switches between winds and does not necessarily tell u. His latest video uses the 'Fig1' winding, but most others he uses 'Fig2'. 7:30 thank fk mate I was looking at that rats nest and cursing ur name lol Schematics are gold. Cheers for the shout out :). Some words of encouragement, don't forget, like Tesla our work is not necessarily for now but 100 years from now no need to rush. Good video mate, had a few good laughs to it. :D
To MTECH's credit, he has fully disclosed his circuit. He has coo-koo's complaining that he doesn't give hardware away. I agree with you, there are no "must-have" cores, bulbs or other components. One either applies an engineering approach or a hit-and-miss one. Tesla preferred an engineering approach.
Thank you for your comment.
I agree that MTech has done great work and for that he deserves credit. What I was trying to get at is we shouldn’t be selling this stuff, there are very powerful institutions and laws that forbid it. In my opinion if we were to align to form a group of alternative energy researchers that educate the public we could finally get somewhere, us, we, the people! Instead of building an army of negative people that purely come after you because your selling stuff, it isn’t worth losing another researcher of MTech’s calibre.
I also agree that the fools that scream through their keyboard for free hardware are absolutely starved of oxygen. Mind you those same people probably just took a break from one handed lubricated internet surfing in their mums basement so…
I prefer the engineering approach, I come from a family of engineers and I have come to realise we see things that others don’t seem to notice until pointed out. Still make mistakes but I try to learn from them. I thought it was very cool seeing Iron Man’s holographic blueprint builder in the movie as I was finally able to show people something similar to what I see in my head. Apparently Tesla preferred that approach also and he had stated he didn’t want to draw it on paper because he had already refined it in his head, to put it on paper was merely for others to understand it.
The best way to experiment with these things, IMO, is to build the device as close as possible to the original, confirm the statements made then begin evaluating all roles of individual components and begin the “what if” experiments of removal or substitution of parts. This is what both myself and MTech and others are doing. I have been through every one of Tesla’s patents and know we all are using his work, in MTechs case, this time, he has “engineered”(copied, because that’s what engineering does) Lasersaber’s Super Joule Ringer then applied the “hit-and-miss” approach and experimented ((this is the bit that deserves credit)) then applied an engineered design in the form of US Patent No. 336,961 and this is what we all should be learning, that we can ourselves take these items and obtain something better than what we’re told.
Don’t get me wrong, I like MTech, I don’t see his channel as an adversary, if anything I would argue I am trying to protect him which has been indicated by me asking him not to earth ground through the grid with Tesla coils in the past when he first started his channel as I nearly lost my life doing similar things.
Thanks for watching, sorry for the essay response.🤣
@@whatifididthis...1236 Thank you for the insight! I agree on every point. But I'm not an avid fan of MTECH, he just gets too much like ol' Don Smith, the guy that had to get the money, be the next J.P. Morgan or something, and got nothing! The writing on the wall is getting easy to see, either we the people, learn how to flow power on our own, or become slaves the the broker's of electrical power. All those EV folks... The only problem, you're buying all your KwH from mister local power co-op. I can share something: I just built the Mtech device with a few skews. My L1 was double, 6mH. L2 was almost spot on, surprising. My core is 25mm diameter. I ran numbers on his device and found his L1/L2 ratio was 3.58 or so. I wanted to build a 1/4 Wavelength resonator, or an L1/L2 ratio of 4, which I did. I have a precision micro ohm meter to get wire lengths just so. I just sparked it up a few minutes ago. Without the "magic bulb" from emitter to the earth ground point, it ran at 4.43 MHz, which was a sweet spot I found when I first hooked it up to the sig gen earlier. I'm trying to work out an analog to the bulb, using source-able components. So far, found a 26V TVS in series with a Schottky a starting point and the circuit took to resonating at about 2.8KHz, too low. Interesting self-oscillating circuit! L3 is pretty frisky on a cap charge. I liked some of Mtech's concept about this device, creating possible field of energy around it and possibly stimulate and resonate with local earth energy in the goal of providing battery charging. I liked your vid and look forward to seeing more!
God bless you brother noor share your discovery I don't know English but I'm translating my conversation 🙌🙏🙏
Thank you for your comment.
God bless you also, happy to share the light. What language do you speak?🙏
Great work
Thank you for your comment.
Have I noticed your comments being deleted? I hadn’t had time to respond and then saw another message that stated it was the second time you had tried. I think they don’t want us to be friends.🤣
@whatifididthis...1236 I have had YT delete comments before or have had multiple pop up only to then find them gone when I go stright to the video. Good old YT at its best.
Happens all the time and to all of us from what I can tell, I’m sure if pushed about it YT would assure us it’s not squashing dissent so it’s probably all good.🤯
@@GuardianEngraving I just took a screenshot of my notifications where I can see the messages from MTech but they definitely aren’t on the video. Dodgy buggers!
@whatifididthis...1236 good idea I'll have to do that next time, cheers.
Is it possible that the reason you can attach any coil to it and it'll still work is because the circuit is producing radiant energy instead of merely resonant oscillations? I've gotten involved with a device that produces radiant energy and it has such a high output that it will often fry weaker components (not my experience, zero4all's) and no resonant tuned circuits are required to simply be able to pick up on those shockwaves.
If your circuit is producing radiant energy and that's what is powering the coils, it would explain the phenomena.
Thank you for your comment.
The burns I get if I accidentally touch the wrong spot are a combination of RF and Radiant energy and electromagnetic electricity and probably other stuff we don't know anything about but it feels like no other burn I have experienced. Somewhat damaging to tissue at the burn site and has an effect that feels like numbness. On my pinky finger I have a matchhead sized area that got hit, a small black entry and exit would were visible(now gone) but it is as though it cauterised a small section. It will get better, I know because it has happened a few times before, note to self, must be more careful!
I have thought many times why the turns ratio doesn't really conform with a standard transformer, eg 20 turns isn't equal to 2 x 10 turns, ie. the output value of 10 turns is not 2 x the output value for 20 turns. That is difficult to say and perhaps better described as non linear which I feel isn't just a resonance factor.
This circuit you speak of interests me, any chance you wish to elaborate? If so feel free to share all you like here.
@@whatifididthis...1236 Ouch, those do sound painful >.<
Do you have an email I can contact you through? YT tends to shadow ban my comments with detailed information, otherwise you can find me under the same username on on other social media or my email on my channel.
You should really read the text of the patent and not just look at the 2 pages of figures to see what the patent entails.
Thank you for your comment.
I have read the Patents in full and encourage everyone to do the same, however most people won’t. It is similar to a user agreement which almost nobody reads. The point I am trying to make is how easy it is to achieve the same or similar outcome by just reverse engineering from the pictures. This is for those not interested in working it out for themselves.
@@whatifididthis...1236 but what does the use of this winding here have to do with an auxiliary brush on a generator that's tapped on its field winding? The patent is for modulating the voltage of a spinning generator.
@@blahblahblahblah2933 Tesla hid information in various ways in his work, the purpose of the machine in the patent is not the only purpose it can be used for, and that was intended when Tesla made it.