วีดีโอ

Could you help me? I have a big problem with my Poly D. In mono mode, a lot of keys do not trigger the right pitch. For example F# trigger a G note, so I have 2 G notes. An octave above, my D key triggers the D#. The next one is the A# key above, triggering the B so I have 2 B notes. If I play a chromatic scale with a MIDI channel in my DAW, the Poly D respond well to each note, so I guess it's a keybed issue.

Had to open mine up to check some connections. I was literally going to start unscrewing the back 🤦 So glad I watched this 😂 thanks man.

Nice to see that someone would be able to repair this lovely instrument.

i heard that you can solder the part of the strings just above the ball ends to improve tuning stability, but i just cant seem to understand how to do it. any advice?

Fn love this low-fi vid brother

HELP !!.....Can somebody please give me some much needed advice ? I've got a Manson Guitar that was built for me in 1986 and it has a KAHLER trem system on it ....I opened the case (which I hadn't done for months) and found one of the strings was not on. But when I looked CLOSER I realized that one of the metal sides that hold the ball of the string IN PLACE has SNAPPED OFF.....The die cast metal bit holding the string in place (not the roller) has broken off & the system won't grip the 0: 24 guage string in place anymore.....I've searched frantically in the case & elsewhere for the little piece of metal with the hope of cementing it with Gorilla glue or Super glue but I can't find the little broken off piece anywhere....Its a GREAT guitar which Hugh built for me which I designed myself so I'm upset here .😥😢 Please can anybody help or advise ? thanks.

for a thin nitro finish yes for a poly finish this isn't going to happen but thanks for showing me how good razor relicing can actually look im doing it to a Lp Junior

hawk's, falcon's and eagle's were Yamaki made

I have a mg100hdfx actualy a pair of em but the master volume is very scratchy, would you suggest blowing it out first with aircan or with the suggested servisol can,. I have already got some CONTEC electrical spray lube aerosol but thought it might be a bit thick or the ol' WD40, would you suggest either of these? Oil is an insulator so id have thought maybe not to clean variable carbon resistors with. its also got noisy fan seems to be endemic with these amps. I got a four channel amp (prosound) between the mixer (behringer) as someone tld me beter to allow a low gain from seriesing the amps, and then the pair of mg100hdfx amps and theres quite a bit of noise from the mixer when first switched on, possibly input capacitors again? I dont notice it after it 'warms' up! - though theres no valves. also the digitech jam man has lost its no 1 slow blues track, is there anybody out there that would be willing to copy their card and post it to me please? ill pay you for a copy if you can do? i found the down load facility on it was slightly faulty and I had to down load each sub routine and 'best guess' patch them together - sort of worked. but then that pc i was using f'd up and was too dear to replace the disk drives, shame was a toshiba satellite. laptop. so i just use as it is. regards Frank. francisjkennedy3@gmail.com.

I have one of those guitars, but the trem was slightly different. Mine didn't have the little covers. I did dozens of gigs with it, in a metal band from 1989-1991 and it held tune beautifully. Even after solos and heavy, fast riffing. Unfortunately, I threw the trem away years ago and have had the guitar fully rebuilt and refinished. It now has a Schaller Floyd Rose. I still have the tremolo arm though, and it's a screw in with about 3/4 inch of thread. I also just bought an RS-10V with the same trem, but in chrome. I'm hoping there is a way I can replace it, without too much modification to the cavity.

Mine is closing in on 40 and all it needs is a ground wire replaced thanks to a cat.

Is there a metal plate /weight in the bottom panel or is this all really 3Kg in total?

Is the case made from metal or plastic ?

I need kahler saddles!?!? Its a kahler flyer. Any ideas on where to get them from. Or is there something else I can use?

I think you really needed to replace that fan, they are very cheap, it's not worth trying to lubricate them as the bearings will be on their way out. I've had a MG 100 HDFX for years, it has never let me down and it sounds very good for what it is. Probably my most used amp, I've got a couple of valve amps and two other solid state Marshalls, but the MG is always the one I go back to. Once you learn how to dial it in you can get some great tones from it.

Does your ldr mode breakup nicely (like it should)with the Gold Lion tubes ?

hats off sir, you are a better man than i...

Hi, i just got my first turntable the same SL1200 MK1 for very cheap, speed is unstable what do i do thanks

I was just considering one of these dual overdrives and thought Wow this would be great, thinking it would have the same Valvetronx tech or tone lab stuff! Now it makes Me question everything by them. They re Vox Metal amplug headphone amplifier sounds great especially for practice but this is pure dumpster fire! Appreciate You!

I have a chrome one on my g5v but the string pass thru are brass..

go cry into your marshall, rich boy.

I'm very Happy with my SC 450 PLUS LP ,From HB, Push pulls ,with Roswell pickups That sound great, It looks great, stays in tune ,, with Locking replacement tuners. I never touched the truss rod, You may have gotten a bad Giutar, it happens , I Would love a knot in my fret board ,,lol,, So out off all the other Budget guitars ,,who is Better??

HB the preferred brand of those who don’t know guitars don’t understand economics/corporate underselling and of course You Tubers willing to lie about anything to make it as guitar tubers ….

That trem bar...... lol great work on the fix

I have one but I need a new power transformer and idea what one I would need?

Either brand make Vs? Won’t the truss rod solve the banana issue?

I had a 79 washburn falcon and a 94 Les Paul classic: I sold the Les Paul cause the Washburn is better and more versatile ...

I learned from your video, did not know about that screw in the back limiting the tonearm from going over too far. Thanks for the video, it looks good, got the same table.

I believe its Yammak just for the record i said Yammaki before you opened the control plate, that is a cherry on top,the wooden compartment. I have a 1980 Westbury Standard, they made a Custom that was a little nicer. I bought it in the mid 80's for $75 from a friend who was getting his first Les Paul. The Westbury was a Matsumoku made guitar that actually came stock with the Dimarzios. The Washburn is made with such good wood, hardware and craftsmanship. I did not know I had anything but a really nice sounding and playin guitar. Then about 10 years ago I heard about these Japanese guitars, a friend told me they called Westburys LP's killers. The Washburn is very heavy thought. They have a few different pricepoints, I think they called them the Wing series. If I could get one of those Washburns, a guitar and a bass I would never buy another gutiar or bass again. Very cool Video.

I have a LSR nut on Two of my Kahler guitars. Stay’s in tune Better than most Floyds

If I were to replace the big volume knob in the middle, would I just pull it up, pull & twist, or is there a screw that needs to be removed? I’ve been hesitant with attempting to remove the knob as I don’t want to unnecessarily force it and break the unit in the process. Also, do you happen to know the potentiometer size of that particular knob?

That "checking" looks hideous and fake af

Hi. Just wondering if there was any update on the tremolo arm for the 600t? I'm still struggling to find out what arm will fit as a replacement 😢 any help would be great thank you

Step one: By far the biggest problem with Kahlers is that stupid behind-the-nut stringlock. But apparently due to lawsuits and patent issues there's nothing they can do about that. Throw that thing away and install a normal Floyd locking nut, and almost all your problems will go away. It also helps to learn how to set the bridge up properly in the first place. Even with new factory installed bridges, you can't always trust that it was dialed in right to begin with.

Hi Tear Down Dude, can you confirm that the synth would work without keyboard/mod section attached? If midi is still good and the output is fine, I might turn mine in to a desktop module.😄

No real surprises here, except lack of plastic happy to see. Glad to see Behringer used a sturdier key assembly-I agree it is probably a Fatar, looks similar in construction to a Generalmusic WX2 key assembly I recently restored except 61-key but same counterweights underneath and springs. with aftertouch, congratulations on an analog/digital synth clone very nice.And a steel frame, definitely "old school" construction, in the best way. Made me glad I have one.

hello, I have a crumar trilogy and I have a black key that comes out that you noise spits no sound and the same key on the 5 octaves we have the same fault otherwise the whole keyboard works, is the same problem

th-cam.com/video/i0LTHr15d8w/w-d-xo.htmlsi=yeWkXBIGvNQLDCuw

Impressed at the build quality, especially metal shaft pots and switches plus quality passive components. Good to see the guts of the poly D. The key action is also excellent quality, looks like Fatar.

Hey to clarify, when you go into timing mode and you hit the step button you were specifying 1/8th notes and not the number of steps. It defaults to 16 steps if you dont tell it before going into pitch mode. Correct me if I’m wrong this is how I understand it, I’m new to programming the td3

Nice video! maybe you can help me with some erratic behaviour in one of this units. The Emphasis control is working randomly. Lets say the synth has been on for 10 mins. Lets say that I'm turning the emphasis clockwise till 9. At that point it starts self oscillating (the high pitch whistle sound). Then I turn Poly d off and on and then the self oscillation starts before 9, at 8. Let's say that, with all the other knobs on a fixed position, emphasis control is triggering the self oscillation usually at 8, but when is not triggering there, then I have to move the knob till 9 to make the self oscillation happen. Turning the Poly d on and off makes this defect disappear again and the self oscillation start before 9. Any idea?

Hi I have the same tremolo on my washburn gv 15. I'm missing the tremolo arm and just wondering what size the arm is? Any help would be much appreciated thank you

As far as I'm concerned Walrus cornered the market with the Monument and Julia/Juliana; they are the main circuits that made them a major force in the market. I also can't get past some of the EQD classics, - like the Aqueduct and Grand Orbiter.There is a lot of competion oit there, but you're just not going to do much better... Vox amps? Awesome.Vox pedals? Absolute trash.Not unlike Fender in that regaurd.

Nice Job! i have to do the same to the cheeks of one of my DX7, i have other two but the cheecks are missing so i maybe will make them in wood. Actually you don't need the Rifa capacitor, they all burn after 20 years and was an old way to suppress noise from the power, my burned on DX7, on a Casio and in one oscilloscope, i just removed them. Better to use 220V or 110V filters coming from old washing machines or microwave ovens. My DX7 at the moment is perfectly working without the Rifa cap. About the cheecks color, i would leave them black. Mine are brown so i would be obliged to spray them with brown paint. Your black color is nicer

Anybody thinking about buying one of these amps by it I got mine for $100 I love it I love it I love!!

cool

Would there be a way to keep the LFO and main synth module connected without needing the keyboard? If I can get a nicer cable to go from the LFO module to the synth and maybe design a 3D printed case for the LFO module then this becomes a much more enticing purchase...

What kind of pickups did you claim they were? Wahi' Valleys

how do i clean the speed dots and area strip

thx - do u have a video of how to clean the speed pots-im having some speed oscillation discrepencies ths