![Regular Dude Gun Gear Reviews](/img/default-banner.jpg)
- 130
- 600 393
Regular Dude Gun Gear Reviews
United States
เข้าร่วมเมื่อ 27 ธ.ค. 2021
5.56 Velocity Comparison - 10.3", 12.5", 14.5", 16", & 18". Ten Different Types/Brands of Ammo
For anyone who just wants to know the 12.5" vs 14.5" data, skip to the 35:30 mark.
Little bit of a long video, but there's lots of comparative data.
The side by side shooting video ends around the 35:00 mark, and from there it's talking through the data.
Little bit of a long video, but there's lots of comparative data.
The side by side shooting video ends around the 35:00 mark, and from there it's talking through the data.
มุมมอง: 1 193
วีดีโอ
KNS Adjustable Piston In My Arsenal SAM7K
มุมมอง 211หลายเดือนก่อน
KNS Adjustable Piston In My Arsenal SAM7K
14.5" vs 12.5" 5.56mm Velocity Comparison - You Might Be Surprised! ***RETEST COMING SOON***
มุมมอง 2.2Kหลายเดือนก่อน
So this was just supposed to be a simple side by side comparison, but the comments have spoken. I'll soon do a retest without the suppressors, but I'll also compare all of the barrel lengths I own in 5.56mm. Which are 10.3", 11.5", 12.5", 14.5", 16", and 18". Maybe I'll even throw in my 13" Galil ACE just for craps and giggles and to add another data point. I appreciate all the feedback and com...
Huxwrx Flow 762 Ti - Experiences on AK's, AR's, and Others
มุมมอง 2.6K2 หลายเดือนก่อน
quick overview and my experiences with the Flow 762 Ti used on various length AR's, a couple of 7.62x39 AK's, and my Tavor SAR
KNS Adjustable Gas Piston in M762 Beryl
มุมมอง 1662 หลายเดือนก่อน
My overview and experiences using a KNS piston in my Beryl
RPM Tools side MLOK rail - Overview and Installation
มุมมอง 1972 หลายเดือนก่อน
RPM Tools side MLOK rail - Overview and Installation
16" vs 8.3" Barreled AK - 7.62x39 Velocity Comparison
มุมมอง 1912 หลายเดือนก่อน
16" vs 8.3" Barreled AK - 7.62x39 Velocity Comparison
Arsenal SAM7K-55 Build Overview and Suppressed Shooting Impressions
มุมมอง 6182 หลายเดือนก่อน
Arsenal SAM7K-55 Build Overview and Suppressed Shooting Impressions
FB Radom Beryl Optic Rail - Picatinny vs. Weaver
มุมมอง 3203 หลายเดือนก่อน
FB Radom Beryl Optic Rail - Picatinny vs. Weaver
FB Radom 7.62 Beryl Overview and Build Process
มุมมอง 9363 หลายเดือนก่อน
FB Radom 7.62 Beryl Overview and Build Process
FB Radom Beryl Trigger Replacement - FIME Enhanced FCG
มุมมอง 2153 หลายเดือนก่อน
FB Radom Beryl Trigger Replacement - FIME Enhanced FCG
Eform 4 Walkthrough - How To Buy A Suppressor And What To Expect During The Process
มุมมอง 10K4 หลายเดือนก่อน
Eform 4 Walkthrough - How To Buy A Suppressor And What To Expect During The Process
Herrington Arms HC10 3.0 Comp on CZ P-10F OR
มุมมอง 3K4 หลายเดือนก่อน
Herrington Arms HC10 3.0 Comp on CZ P-10F OR
Budget Build Overview - Centurion Arms CM4, 16" Faxon Gunner, Midwest Industries Slimline, Expo Arms
มุมมอง 4855 หลายเดือนก่อน
Budget Build Overview - Centurion Arms CM4, 16" Faxon Gunner, Midwest Industries Slimline, Expo Arms
AR-15 Complete Lower Assembly Tutorial (Centurion Arms CM4, SOLGW Blaster Guts, Magpul CTR)
มุมมอง 4125 หลายเดือนก่อน
AR-15 Complete Lower Assembly Tutorial (Centurion Arms CM4, SOLGW Blaster Guts, Magpul CTR)
AR-15 Complete Upper Assembly Tutorial (Centurion CM4, Faxon Gunner, Midwest industries Slimline)
มุมมอง 2866 หลายเดือนก่อน
AR-15 Complete Upper Assembly Tutorial (Centurion CM4, Faxon Gunner, Midwest industries Slimline)
18350 vs 18650 Sized Weapon Lights: Which One Is Right For You?
มุมมอง 5316 หลายเดือนก่อน
18350 vs 18650 Sized Weapon Lights: Which One Is Right For You?
AR-15 Safety Lever Comparison - Badger Ordnance Condition One vs Forward Controls Design ASF vs Mil
มุมมอง 2K6 หลายเดือนก่อน
AR-15 Safety Lever Comparison - Badger Ordnance Condition One vs Forward Controls Design ASF vs Mil
CZ P-10F Optics Ready - Initial Overview & Comparison to Glock G17
มุมมอง 1.5K6 หลายเดือนก่อน
CZ P-10F Optics Ready - Initial Overview & Comparison to Glock G17
To SBR or Not To SBR? Pro's, Con's, My Experiences, & Eform 1 How-To
มุมมอง 2.1K6 หลายเดือนก่อน
To SBR or Not To SBR? Pro's, Con's, My Experiences, & Eform 1 How-To
Geissele SSA-E, SD-E, SSP, & S3G Comparison
มุมมอง 10K6 หลายเดือนก่อน
Geissele SSA-E, SD-E, SSP, & S3G Comparison
11.5" Colt FBI HRT Build on LMT Receivers
มุมมอง 3.4K6 หลายเดือนก่อน
11.5" Colt FBI HRT Build on LMT Receivers
Forward Controls Design/SOLGW Anodized Receiver Set Overview and 16" GPR build
มุมมอง 6K8 หลายเดือนก่อน
Forward Controls Design/SOLGW Anodized Receiver Set Overview and 16" GPR build
HRF Concepts Ridge for the ModButton Lite
มุมมอง 4819 หลายเดือนก่อน
HRF Concepts Ridge for the ModButton Lite
HRF Concepts RCM on Daniel Defense Mk18
มุมมอง 1.6K9 หลายเดือนก่อน
HRF Concepts RCM on Daniel Defense Mk18
Law Tactical Folder on a Palmetto State Armory AK-V
มุมมอง 2549 หลายเดือนก่อน
Law Tactical Folder on a Palmetto State Armory AK-V
Cloud Defensive REIN Legacy Body - Does It Reduce Output? Quick Side By Side Comparison
มุมมอง 1.5K9 หลายเดือนก่อน
Cloud Defensive REIN Legacy Body - Does It Reduce Output? Quick Side By Side Comparison
13.9" mid length gas/A5 RE/A5H2 buffer vs. 14.5" carbine gas/carbine RE/Sprinco Blue/H-2 buffer
มุมมอง 6K9 หลายเดือนก่อน
13.9" mid length gas/A5 RE/A5H2 buffer vs. 14.5" carbine gas/carbine RE/Sprinco Blue/H-2 buffer
The best and cheapest way to reduce recoil is to properly tune your gas system. Use a BRT tube or install a RifleSpeed gas block.
I hope you see this comment. If you want the wobble improved _significantly_ - try out some HK MR556 takedown and pivot pins. They are around $100 for both pins but they will immediately show themselves to be worth the cost once installed. I bought one set to improve one of mine, and was amazed at how well they did their job. Now I am slowly updating all mine to them.
$500 for a receiver set that has problems? Hell to the no.
Thank you. Just got my duty weapon all squared away. My holster uses the light for retention so sometime it would catch because the light was wobbly. You solved my problem. Thank you.
Glad it helped!
The fool at Cabela’s I was talking to was telling me your optic should cost the same amount as your gun. So my rifle was $2000 he’s telling me it’s standard rule of thumb. Sounds like standard rule of thumb for people who care too much about about made up price rules. I’ve heard tons of people say the razor is only 10% better maybe. Why spend way more than twice as much for 10% increase in quality when you’re using it for regular shooting range stuff?
Wish i could find those fde iron sights. Great build buddy
Appreciate it! I got these from Optics Planet
So much work for a 300 plus light
Who really pays $300 for these?
If you happen to send the handguard set sailing, PM me please
FB Radom rails in stock at Arms of America right now!!
I did see they had another recent stock up!
@@regulardudegungearreviewsh3132I just got mine the other day. I'm a bit nervous about installing it tho. Should I use a mallet? Remove the dust cover? Yours popped on easy and slick.
Thank you for the detailed comparison of these two scopes in the context of alternatives like a red-dot, red-dot+magnifier, the ACOG, etc.. I've used a red dot but thought that adding magnification would be excellent if there was an LPVO that at 1X that could almost replace the quick target acquisition of a red-dot. Having a long eye relief dimension seems it would aid that. Your examples of the effect of changing viewpoint was very helpful regarding that. Thank you. I'm leaning toward the Sig Tango MSR.
Glad it helped with your decision!
You made the right choice, just took my 762 beryl home last week! Already had the 556 beryl.
Dude, it was just cool to see a team working together 😊 I recognize that didn't happen for free. Respect.
Sooo clean it’s like a 1956 bathroom
😆
they dont care if you are original owner or not Sig Vortex and POF all stand by lifetime warranties no matter who owner is, I hope PSA is the same, probably is.
I might sell my sig sauer 1-6x LPVO for a higher magnification scope, maybe a Arken Zulus as its cheap and it good magnification day or night
So I have a question if anyone can answer please. On the Daniel Defense rifle on the video, around the buffer tube and up against the lower receiver, what is that clamp for?
Are you talking about the Law Tactical folder?
@regulardudegungearreviewsh3132 Okay, yeah, that makes sense. Thank you for responding. I'm new to the AR15 world so I'm trying to learn as much as possible. Thanks again!
Despite fast/slow barrel comments, it's still worthwhile to note that the velocities are close enough to overlap. In other words, velocities are so close that barrel construction can negate the difference
Yes! Glad someone recognizes that
Willing to bet the suppressors have something to do with these results.
I've got a separate vid coming where I test several guns suppressed and non, side by side. From what I've shot so far, not really much difference with my guns and cans
Almost looks like the legacy has more candela and is slightly brighter outside. Guess that's what I'm ordering
Can't go wrong with either one, but I can definitely appreciate the extra options the legacy body opens up
ah bureaucracy, my favorite form of torcher
Yeah, it's grate. GRATE. Lol
What suppressors are on each gun?
Huxwrx Flow 762 Ti on the 12.5" and Huxwrx HX-QD 556 on the 14.5"
It's not a mag extension. That is a polymer cover OVER a full length one piece tube. You can use an Allen key to slightly raise the QD up from the buttstock which cures the qd issue nearly always. Yes the safety is reverseable
You can get the SSA-E for 150 fairly easy if you look.
Yep
My black magazine won't lock back when empty , but my slick two tone one does, don't make no sense , but the black feels better an broken in already
Have you tried taking it apart and running a rag thru it? Maybe it's got some manufacturing debris or something in it? If not, I'd see if PSA will replace it
Thank you, Im actually going to try to put the alg el trigger after watching this video.
It wasn't too bad at all. You got dis 🤙🏻
@@regulardudegungearreviewsh3132 Just want to say thanks again, I finally was able to do the swap, worked out great. It feels so much better than the LBE G3 that was in it.
Thanks for making this video. I wish I would have found your videos earlier. I too recently fell for the idea of glock perfection perfected by me! Just got in my 19 size LW frame and I immediately ran into an issue on the install with the mag release. I purchased an extended aluminum one from the glockstore and it was super tight. I had to use sandpaper and work on the opening to get it to where it would move freely. I solved that issue but after the mag release was installed it has very little play and is very little movement and is extremely stiff. Nowhere close to a factory glock. It could be the aluminum one from the glockstore. I’m going to try to swap in a stock mag release and see how it goes. I’m a bit disappointed to be honest and I’ve already lost confidence. Thanks again for taking the time to make the video as there is not a lot out there on the LW but I’m see why that might be!
Appreciate it man! Yeah I've gotten away from these builds. I don't even own this one, or my GGP G19-ish build anymore
@@regulardudegungearreviewsh3132 I’m with you on that. I think it will at most be a range toy if I ever get it sorted out. FYI I threw in a stock gen4 mag release and still had the same issue. You’d think it wouldn’t be that hard but apparently it is I guess.
2 years later is the 509t still holding up? Considering sending my non mos g45 slide in to jagerworks for it cut and coated sniper grey while on sale with the irons for it. Really need a second opinion before I wait 2 months for it back and won’t be able to go to the range at all… I have bad eyes tho and feel I need something better then irons. I want this for my edc for concealment also and will get a custom iwb holster but I want a second opinion before I waste alot of money on my new range toy
I don't own this particular 509T, or even the gun, anymore. But I sold it to a guy that I work with and he hasn't mentioned any issues with it to me. I've also had two others with no issues. I'm really an RMR and ACRO guy, but I wouldn't hesitate to recommend the 509T to anyone
What recoil spring are you using?
OEM
Thanks for the video, I have the 5.56 and I’m gonna give this a try.
Put a drop of gun lube on the threads of the suppressor and it shouldn’t cease anymore
I'll try it out, thanks
Why does that RHF handguard have the Midwest Industries logo on it?
I think maybe you're seeing the MLOK logo
@@regulardudegungearreviewsh3132 Oh yeah. I forget Mlok is a trademark with its own logo.
If im not running a can, i see no benefit to a kns? What do you think? Kns still worth it with no can?
Well they do also assist in making it a lighter recoiling gun. Which besides making it more controllable, it also means your gun isn't beating itself to death so much
Where did you get the TDP?
Man, really appreciate the effort, but all we've learned is that you have a 14.5 barrel that clocks on the slow side and a 12.5 that clocks on the fast side, which is not unusual. The data you're looking for would require comparing like barrels of differing lengths in similar working conditions. Same suppressor, same gas block, etc. It would be best to narrow things down further by blocking off the gas ports.
Yeah I'm not so sure about that. There's plenty of other data points out there that show the same, or very similar results
Great vid answered all my questions as a fellow lefty.
Glad it helped man!
The image clarity is nearly indiscernible. The difference I see is in that the body of the Razor way less visible compared to the Viper.
Yeah it's stupid close. Really hard to justify the cost of the Razor over the Viper
Technically speaking, there is only a marginal increase in performance/ability of an SBR over a pistol with a brace. Many folks opt out of the SBR due to that. For me, a positive thing about doing an SBR, is our state law regarding pistols. - They require all pistols to be carried in a waist or shoulder holster, or kept in a bag/purse/etc. This means if you have a pistol version of any caliber that is too large to meet the waist/shoulder requirement, then it has to be kept in a fully enclosed container, like a gun sheath. This means if you had say, a braced .300blk pistol, you could not carry it off your property. Even taking it to a gun range, it would have to be zipped up in a bag. An SBR however, has no such requirements. You can carry it openly in a non-threatening manner, or have it in the seat of your car, etc.... So the reality is, it is good to have both SBR's and Pistol's with braces. The SBR removes entanglement of requirements inside the state, while the braced pistols can be transported out of state, and you just have to be compliant like you do with any other handgun.
I’m still waiting been 7 months!!!!!!
Dang that really sucks man
Does Ti cool down faster than steel? I have noticed that the scales on my Chris Reeve Sebenza seem to cool down faster than the SV30S stainless blade. Also, does Ti experience less dimensional change when heating and cooling than steel? Any metallurgists out there? I think I will be buying a Flow556 Ti and a Flow762 Ti. Can anyone give good recommendations for great cans for 338 LM or 408 CheyTac?
I can tell you that Ti definitely cools down much faster than steel. It's also ridiculously lighter. As far as expansion goes, that part I can't answer.
@@regulardudegungearreviewsh3132 Thanks for letting me know.
I can not decide between 18350 or 18650, i just dont ever see myself using the light that long, and if i did i have a spare in my stock... i may just buy both and throw one on the next build
My opinion is that it's better to have it and not need it, than need it and not have it. The only 18350 sized bodies I have are on guns that wouldn't likely be my go-to for a situation in which I'd really need my gun searching around an area in the dark
Thanks for this!
Appreciate it! Glad it could help
The difference in 14.5 - 16 is crazy considering pretty much all 14.5s are pin welded to 16. Good NFA dodge but definitely doesn’t perform the same as a true 16 inch
Mainly in regards to the Winchester m193
Definitely dodged the NFA, but if you take the same suppressor mount or muzzle device and put it on a 16", it's still going to be 1.5" longer. And that small but really does make a difference in feel and handiness
Nice build might need new roll pin or throw so threads in there buy a threaded pin?
It seems to have gotten a little tighter the more I shoot it. Maybe it's carbon build up a little
I have the exact same one, 508t and tlr1, except I paid $612.00 out the door at my local shop. I’m really considering the same barrel and comp that you have. Thanks for posting this.
It's a great setup! Do it!
Where did you score your cm4 with the alignment slot?
AR-15 discounts.com
Bought a gen 3 a couple years back. Worst firearm accessory I’ve ever purchased by far
It's definitely not for everyone or every purpose
You can find the LaRue for $75-85 a lot.
I have 2 MBT’s now I really like them,for the price vs any difference in feel the LaRue takes it.go with what you like though if you have the chance too try both. The Price difference is crazy too me though.
I would never pay the full MSRP $240 for a Geissele. I usually wait to catch them on sale for $175 or so. Still worth it to me over the feel between the two. The Larue isn't bad by any means; it's just no SSA-E
What magwell?
Empire Katana V2
gas port size is bigger 14.5 than the 12.5?
Not sure, exactly