@@regulardudegungearreviewsh3132 Just want to say thanks again, I finally was able to do the swap, worked out great. It feels so much better than the LBE G3 that was in it.
With the main sprung being so short how do you remove it? With the tradition AK you bend them up over the hammer but the beryl springs r too short and tight. Was pumped to see your video and was bummed u fast forwarded that part. :)
Oh no, man, I removed the Beryl spring and replaced it with a standard AK spring. I mention that in the video. I tried it with the Beryl spring and the pull and reset was absolutely horrendous. Technically it wouldn't even work
@@regulardudegungearreviewsh3132 I was hoping to see how the heck you got the old shorty Beryl spring out of there. Can you simply just push the pin out without securing it against something? Thanks so much for any detail you can provide on getting the old/short spring out!
@regulardudegungearreviewsh3132 I tried installing the trigger today and the bolt won't clear the hammer when trying to reinstall the bolt carrier. Idk if I did something wrong? You have the exact same rifle and yours worked fine so I'm not sure what's going on. Frustrating.
@@aaronrichards19886 that's really strange. I've noticed on some triggers they have more raised and sharp edge to the hammer face that can be a little sticky. I just grease that up and run the bolt a bunch of times to polish it up
@regulardudegungearreviewsh3132 I contacted Fime before I bought it just to make sure it wouldn't need to be modified to fit in the Beryl 762 and they reassured me. I did end up getting the non-enhanced version bc they said it's exactly the same except it doesn't have the anti trigger slap feature. Maybe that's why it's not working ? I emailed them again so hopefully they can figure it out. Thanks again man.
Thank you, Im actually going to try to put the alg el trigger after watching this video.
It wasn't too bad at all. You got dis 🤙🏻
@@regulardudegungearreviewsh3132
Just want to say thanks again, I finally was able to do the swap, worked out great.
It feels so much better than the LBE G3 that was in it.
With the main sprung being so short how do you remove it? With the tradition AK you bend them up over the hammer but the beryl springs r too short and tight. Was pumped to see your video and was bummed u fast forwarded that part. :)
Oh no, man, I removed the Beryl spring and replaced it with a standard AK spring. I mention that in the video. I tried it with the Beryl spring and the pull and reset was absolutely horrendous. Technically it wouldn't even work
@@regulardudegungearreviewsh3132 I was hoping to see how the heck you got the old shorty Beryl spring out of there. Can you simply just push the pin out without securing it against something? Thanks so much for any detail you can provide on getting the old/short spring out!
@tt350zJason I just pushed the pin out slightly and then used a flat head screwdriver on the head of the pin. Eventually it popped out.
@@tt350zJasonyessir, I just push both pins out and dumped everything out
Thank you for this video. I tried installing a Rak1 trigger in my beryl 762 and it just wouldnt work. Im gonna try this trigger next.
Yeah give this one a shot
@regulardudegungearreviewsh3132 I tried installing the trigger today and the bolt won't clear the hammer when trying to reinstall the bolt carrier. Idk if I did something wrong? You have the exact same rifle and yours worked fine so I'm not sure what's going on. Frustrating.
@@aaronrichards19886 that's really strange. I've noticed on some triggers they have more raised and sharp edge to the hammer face that can be a little sticky. I just grease that up and run the bolt a bunch of times to polish it up
@regulardudegungearreviewsh3132 I contacted Fime before I bought it just to make sure it wouldn't need to be modified to fit in the Beryl 762 and they reassured me. I did end up getting the non-enhanced version bc they said it's exactly the same except it doesn't have the anti trigger slap feature. Maybe that's why it's not working ? I emailed them again so hopefully they can figure it out. Thanks again man.
Any issues with this trigger so far?
None at all. If you look on my channel I have some videos of me blasting away with. Pull is consistent and no reset issues or anything at all
@regulardudegungearreviewsh3132 ill check them out. Thanks again.