วีดีโอ

Buen bieeeo amigo saludos

This is off subject but needing help badly. New to 3d printing and P1S, my P1S got here today. Got a big problem that I need some help with. I have A1Mini and use BL studio / Handy app account with no problems. But can't get the P1S to sink with my BL studio / Handy app account. What do I need to do to correct this. I uninstall Handy App still nothing. Now both printers don't syn with Handy App and BL studios nothing.

Put a Panda Touch on the P1S, upgrade it's extruder and you're pretty close to the X1c for just an additional $100.

My filament doesn’t slide out when I try to pull it out of the tube

I really need help please. I can not disconnect anything in the back. Everything is stuck. Starting from the 1:40 mark on the video, none of the connectors are disconnecting. I see the black PETG running through the pipes but the connectors just wont break loose

Thank you for the info and your time.

Thank you for the overview of this, i am planning to get this one in the future. But do you really need AMS as a beginner? There’s a bundle price for p1s+Ams but it’ll be almost $550 for ams alone

Thank you for this! Just picked up a SV06 and was having issues with my first test print. This was the reason!

I really enjoyed your video. Thank you for making it. I laughed very hard at the angry wife section. You are not alone.

Thanks for the helpful video, I think it's easy for someone to follow. I think you should move the print head over the heated bed and let the inductive sensor heat up before using it to level the bed or set the z-offset. Inductive sensors trigger sooner when they are hot vs when they are cold. Test it. Let the printer heat up with the sensor not over the bed, then set the z-offset. Then move the sensor close to the bed and let it heat up for a few minutes, then check the z-offset again, I have got up to a 0.13mm difference. This difference between the sensor being hot and cold could make a huge difference in bed level and z-offset. After I learned this, it fixed all my problems with inconsistency in bed level and z-offset. Inductive sensors are fine on accuracy, you just have to let them heat up first. This is something a lot of beginners (and even pros) are not aware of so it would be nice if ELEGOO told people about it in their instructions. Who knows, maybe they are not even aware of this. I think ELEGOO is a great company and has better customer service then most companies so I don't think they would leave this out on purpose. Hopefully they will add it to their instructions in the future.

I got mine from kickstarter but haven't unboxed it yet :'( life gets so busy! I hope it still works ok

你哪裡人?

Great video, what camera did you use for your timelapse?

at this point why not change the beariong for dry one like the DryLin Igus? i head they do a way betert job than base one. and is nbot specialy more expensive taht buy oil and suply.

Thanks.

@savageLau, thanks for the video! I am thinking to get one Bambu Lab printer. I dont have too much money and I am hesitating between P1S and A1, Could you make a video showing the print quality of both machines? Thanks!!!

doing my reseach, this was very helpful! thank you I am going to get the p1s now. :)

A quick-access door on the bottom would be much nicer than taking it apart each time.

GREAT Video, but I was hoping to learn how to use the external Spool. I can't quite figure it out. Did i miss it perhaps in this video. Would be a 100% complete vid on A1 except for that info missing. Files are great thanks - do you have a video on how to use the external spool??

I followed your tutorial and it started to produce smoke

Great video - you should add download links for the upgrades in the description :)

Most useful! You have a new subscriber.

Thank you. Great video

This isnt a set up guide..../tutorial

did you ever work out why the auto level function comes up with a different value every time, I am having heaps of problems with this printer, it never keeps calibration that works and it can almost never print anything higher than 5cm or so before knocking the print over

Helpful and real review, thanks!

Amazing

Thank you so much! Every other video I found did not have to use the lever but that's exactly what I needed to know.

Thanks, it help me a lot

Thank you for validating my decision to get the p1s, i ordered one with AMS combo over the weekend. liked and subscribed 👍

saved my life <3 brother

This is how you review! Thank you so much. Companies need to be sending you their 3d printers for free. Not thise snobby youtubers that lie and can careless about getting another free printer.

exists a way to view a battery level?

You're supposed to measure dB levels at 1m, not right next to the motors - for next time 😄

Hardly a setup video

why do no one remove the purge towers when they already have enough waste going through the pooh shoot on this printer's it's already purging

Thanks for the video. It helped me with my clog. Luckily I didn't have to take apart the AMS. Just removing the PTFE tubes and I was able to pull free the filament. Cheers!

Hello SavageLau and everyone on this channel. I got my new Sovol06 yesterday and after greasing an assembling it (thanks for the tutorial) and everytime I start "Auto Z-Align" the error appears: "Driver error: PRINTER HALTED Please Reset". I installed the newest Firmware with a different SD-Card but it didn't work... Does anyone knows how to fix it?

isnt superlube bad since its ptfe

Thanks for taking the time to put this together. helps me speed up the tuning process. as of now, Prusa Slicer has the profile for sv06 Plus!

hi, 挺好的讲解，想问一下视频里用的背景音乐是什么名字，很好听，想冥想的时候用~

Great Video. I have the X1C and love it. I feel that in the long run, these printers saved us a lot. I use it all the time, and I am 95% sure my filament will not be wasted as with my older printer. Bambu makes it fun again. Enjoy

How ya like the interface on the sv07

Hi, I have a problem with this piece, my filament got stuck in the entire hot end and I can't remove it because it's stuck between the nozzle and the cylindrical part that binds it, how can I do it? should I buy a new one?

Thanks for this video. I have a Sovol 07+ that has been going great after I discovered glue sticks, but suddenly nothing sticks. I’m planning to try a G10 plate. The PEI plate is needed to stop the Z down before crashing into the the plate. If I add the G10 1.5 mm how can I prevent the head crashing into the G10? Thanks. I’ve been levelling before every attempt. Next day - I see that using a G10 will not work. I’ve levelled the bed with a spirit level. Did the corner levelling which put the bed way out of whack. What hell is going on here? Update Restored factory settings Manually levelled bed with spirit level. Z tilt Z calibrate Bed level using screws adjust only Bed Mesh Is now printing good again. Thank you :)

How ya like the interface

The build plate temp of the P1 series goes only up to 100c, X1C to 110c. Printing PC you absolutely need 110c to get higher chamber temps. Or you have to mod the P1 with a PTC chamber heater.

Waiting for Sovol SV08 Review

thanks for the walkthrough. just followed the video and found that on mine, the bolts that connect the heatsink to the extruder stepper motor didn't have any washers at all!. and I don't have any that fit. so that sucks

what should the temperature settings be for the bed and extruder