วีดีโอ

I wrote my coo=comment before watching the whole video. It's the vertical bolt that levels the deck. Counter clockwise will lower the deck to make it level. And I mentioned mounting the engagement lever on the quad. I moved it to the arm that connects the mower to the quad so when you disconnect the mower it's completely free of the quad. Only disadvantage is you have to get off the quad to engage but that's no big deal. At least I won't risk yanking the cable off the mower. You can put a loop in the cable and tie it with a tie heavy wrap to keep it off the ground.

I have the exact same model and I love it. A couple of things I found. If you lower the deck so it's level, you can get it to cut as short as about 4". Angled like you have it in the video cuts too high IMO. I use two metal car ramps braced against a 4x4 anchored with rebar rods pounded into the ground to drive it onto so I can get under it with a grinder to resharpen the blades. Once up, I use two heavy duty jack stands just to be safe. This thing weighs a ton and if it ever fell on you you'd never get out from under it without a third party present - having a good car jack close by in case is also a good idea since most of those who would use this aren’t close to emergency services. I always keep my cell phone in my pocket when I'm sharpening just in case. After sharpening I spray WD40 on the blade to keep grass from sticking to them. A little where the blades swivel doesn’t hurt either. Without it, grass cakes onto them and it seems like they're dull but it's just caked up grass. Use the side of a putty knife to scrape the grass off the blade edges and top of the blade. Lastly, I mounted my blade engagement handle the same way you have it but it got hung up in a tight turn and pulled the cable out of the engine side. I had to replace the cable and getting the end with the metal bead (engine side) was a bitch to feed through parts close to the mower. The plastic shielding had to be cut the full length and then electrical taped back up (advice from Swisher). With the other wires in the way it’s impossible to feed it through. Hope this helps anyone with this Swisher 44” country cut. Last note, swisher makes a slightly smaller, lighter less expensive version which had I known before buying mine I would have opted for. This and my Tracker 300 (Bass Pro Shop) posi traction. Is a great combo for mowing acreage. Together about $8K. The beauty of this setup is, you have a ranch vehicle to drag a trailer or just to drive around the property when you aren’t mowing.

TUES 10.22.24 >> FROM Mobile AL USA 36605 >>> ???EBSITE & CALIBER ?????

Bro said not today

This is the cutest excavator I've ever seen! Curious to see how well it works! (Continue binge watching! 😀)

I watched your video on the pond build. I'm inspired! I'm about to dig a pond myself. I have some questions. Do you notice any leaks? Is there a spillway? Do you fill the ponds with the hose when levels drop? Thank you.

Why everybody say diablo pellets when that's no true. There say diabolo no diablo. Everybody is confuse about this pellets brand. There is no diablo pellets for sale I neve saw diablo pellets.. I saw diabolos pellets

How many hours of operation on one tank of fuel?.

Great Stuff How did you attached the base to the container?

Unbelievable...👍

I love sunflowers 🌻

"It's a plant, not a tree" buddy I have some amazing news

I added a valve where you fill the reservoir at for quick air bleeding without taking a shower you can unscrew the valve just as easy as that plastic plug as well if you wanna fill from the top

I recommend getting some Cam lock quick connects guy there awesome plus most hoses have them built in them

New subscriber

We’re these mammoth grey stripe?

Awesome creativity. I was actually looking for video. Where's somebody created living space on top of a shipping container. How are the floors in your shipping container, I'm in the market and wondering what to expect?

That thing emptied my friend’s 10,000 gallon pool in 1.5 hours

How do you keep them from toppling over when they get this big

hi can mice climb up the flower and eat the seeds, i dont think it was a bird???

How is the Seneca Aspen holding up you? Please let me know should I keep or sell it? It look like Seneca is no longer selling them or no has them in stock anymore. I still haven't even shoot mine yet.

Very nice video, thank you 😊 🙏 👍 😀

Mulch

Is a tracked skidsteer any quicker or easier than a good size tractor?

It’s a huge rifle!

😂haaaaaaaaaaaaaaaa

The "gears not engaging" is the bit being driven out and jamming on the retainer. Lifting and dropping the machine usually frees it up and allows you to continue. Try to not let it hammer unless the bit is in contact with the ground to prevent jamming.

My sunflower bloomed but soon they die ..they are in full sunlight I give cow dung and npk once a month and water they every day because the weather is dry and hot here..but I don't know why they die after bloom 🥺please help me what should I do?

Where have you been? Hope all is well

I bought "giant" sunflower seeds online but I don't think they'd grow this large. Can't find legit mammoth seeds

Excellent video, I wonder if the pumping mechanism still holds up since the time you shot this video

Cool seeing a little diesel engine on the unit !

To much negative tongue weight = the DEATH WOBBLE !!!! Many folks on utube have totalled campers etc during such ! Thank goodness u knew to slow down

Hey, weather is getting better here. Any more recent updates? From Coastal Texas.

all your fish will disapear slowly

water bubles in your pawn would clear the water

Hey just curious what size shed is this that you bought

Thanks for the info on the pump. I work for a cemetery and had to drain a grave. My boss gave up when it didn't work but I didn't. Same issue vacuum wasn't sealing properly. 😂

Thank you so much for this video!!

I think the best thing to do is remove the hand pump assembly, all together. I purchased one of these and within 1 year the hand pump seized. I called pyramid about it and was told the hand pump was only to be used to get a few more shots IF an external pump was not available. I took it apart, cleaned it and was able to use it for a few more weeks...until it seized again. I was told there was a 1year warranty and the only way to have it repaired was to send it in. It would have cost more than a new one. I bought the avenger and it leaked..badly. I returned it and got my money back. Then I removed the entire hand pump assembly from the Aspen and plugged the block (inside). I have to use an external pump, but it works. I actually love this air rifle. It is accurate and consistent but the hand pump is an absolute TURD.

😅😅😅😅

I need a fill probe for my senaca aspen 177 caliber please help

It would be best to read the freshwater jug fishing rules before you go again

What variety?

Good job explaining it at an idiots level. That's what I need.

OMG too funny - we were watching the tubes come out and we felt so much better that we weren't the only ones. Thanks for hanging in there and finishing it - now we can go outside and get it done!

Hopefully you can do some tests showing what distance would be the maximum penetrating power in terms of hunting medium size game like hogs. I don’t want to shoot an animal and make it suffer. It would also be interesting to do this test, using different kinds of ammunition, like solid, hollow point, and slugs in terms of accuracy and penetrating power at 50 yards or more. Ballistics gel would be interesting and also using animal carcasses. I think the results would be interesting.

The noise the windmill was making when turning what was that? Mine is making the same noise.

Thanks for the video je suis en train de perdre patience à assembler la mienne

I have this gun from back when it was released by ATI as the Nova Freedom, I have had to replace the third stage pump o-ring a couple of times, and the o-ring on the air tank once, but 6 years and thousands of shots later it's still shooting.