วีดีโอ

For a few years now ive been cleaning my bearings and only replacing the ones that are too far gone. I have mismatched bearings on all my boards. I couldnt tell u whats good or whats not LOL. But i will say that the swiss and my quantums stayed consistent out of the bunch

Hey Its Me Again, Check Out My Music, Im Writing This On My Music Channel,

Bro I'm the same way when I remove the windshield and all four windows from my car, like I know the interior won't last as long, but it makes me feel like I'm going faster, because the wind hits me more. I also remove the hood so I can show my engine, I have a blast going through car washes. 😆😂

I found a pair of 129 Indy’s in my garage made in the US, can u use them on a 8” board or should I stick with my 139’s ?

I redrill boards but normally to shorten wheel base

This is wrong the Smith is opposite of how you would 5050. doesn't require the wheel pinch. Smith is all the way on

I’m size 13 and I’m considering dropping from a 8.25 to 8.1

I’m a heavy (230lbs) skater and notice a significant difference between the performance of the big balls. As I understand, this is a primary advantage of the difference.

Just bought some Indy 169 forged aluminum. I have 149 thunder titaniums on my 8.5 boards and some heroin boards. Gonna use the 169 indys on my 9.5 shovel

Yah I thought same thing because of my 9 inch length independent and one your show one been wanting the ex Ray skeleton egg board and 9.25 all that works out well my end yah awesome heroin deck

Hey Leon, thanks heaps for making this video! Can you recommend any parks around the inner west or city that are good for learning these tricks? I found a park in the mountains called Melrose Jr skate park which looks cool but its a long way to go! Thanks dude, love your channel, I dont have to drive around looking! :)

Indys are the best

What a spin out, I'm not big on YT but dig your channel. I'm a 30 something dad starting fresh, just so happened to learn feebles on a whim a couple days back, got the axle stall today. On that same board believe it or not. ❤

Ventures have the largest wheelbase try them out on an egg board

I pay attention to your videos everyone I've seen very good & you know what talking about but yah I'm loving these egg boards I can't wait own one soon I have stage 4 independent trucks so I'm wounding what good deck buy 9.25 or 9.5 sumatrical I'm interested in owning one I'd like make sure what good size this independent stage 4 9 inches length trucks are please comment bro!?

Question I have stage 4 independent I'm about order heroin skateboards deck being independent trucks are 9 inchs length so what type of egg board get 9.25 wide or 9.5 please comment id appreciate it

yo how is your foot

The fact you can get like 7.5 to 11 inch wide boards nowadays

Anti heros are the best for me being 6foot 2

This has been my exact issue as a similar sized dude

I dont know if I agree with your explanation. Most boards are close to the same length, so a shorter wheelbase will mean that the nose or tail will be longer. A shorter tail will give you more power as it takes longer to snap to the ground. If you want the same power from a longer tail, you will need to make the tail steeper.

Rip Fausto Vitello, Indy was the best since he was alive, no promodels, sick ads, stage developing

Love the gameboy synth sound in whatever song this is

Youre really brave to skate in slip ons. It just chews em up so bad. Im like 16 pairs in this lifetime, lol

When i was a kid, i would use really bad bearings from time to time. But if you soak them in wd40 overnight, they literally turn into abec 9s and it LASTS. Id do it to better bearings too and it just conditions them nicely and adds some smoothness. I had some blind bearings at one point, and would remove and replace the shields and soak em, and they worked amazingly

My blunt slides are always like over tails

Haha I’m a short guy I ride 8.5 with 14 wb

Those two fellas in the background are looking hot hot hot!!!

Thanks for the tips! Can you make more !

Backtails please 🙏🏾

I Can't Get My Ollie's High Anymore, Can You Help Me? Because Of Your Blunt Slide

No

The way Ace's grind the baseplate on blunts is so satisfying!! Bigspin out is buttery I need to give em a try, great vid Leon thanks!!

Yes, a backtail tutorial would be appreciated. Thank you

Is that park still slippery af? Nice fit btw, kinda 80s summer vibes inspired 👌

DIY parks are always sick. Used to love skating the one in Galveston TX by the beach (it’s been demolished since new owners bought the property). Also you should do an update video on your spitfire radials! Great videos keep it up bro

Very cool how all your landings were on beat with the song😅

Nice, Have a tons of trucks, but 149 is the biggest, in my room, what trucks do you ride on that 9.125? 9" thunder?

What width trucks are you riding on that setup?

I grew up riding reds, they are what my dad rode for as long as ive known.

Want bigger 🥚size? I am Prince of Nigeria and that sounds like a good investment. Send me 500$ and I will send you pills for enlargement. P.s.: Need gold? I run out of storage space.

So what if you come across a ledge that is all waxed up already and you want to take it off?

im glad to hear that yours are wearing though

holy shit sucha bummer. the vans slip on pros were hands down my favorite shoes. they lasted me so long and were so insanely comfortable. My mom got me a pair of slip ons for my birthday and they are the new ones and my god ive never felt so uncomfortable skating in a pair of shoes. Bring back the old formula, fuckin tragedy

i think i can (barely) hit like two of these features - fun to see someone who can actually skate get into it! gnarly area but the locals are legends

Half cab lip 270 was horny gear

Hey Leon, just wanted to say that your my favourite skate TH-camr and you’ve convinced me to stop using an 8.5 deck as a size 12 foot 😂

No man I had 38mm 98a "bullet" wheels, but I can't remember the brand

the most grindable bench of all time

back board 270 was sick as hell man