- 43
- 255 387
Sam's Auto Assortium
เข้าร่วมเมื่อ 15 พ.ย. 2023
Just a regular guy with a love for all things automotive, buying junk vehicles to save them from the scrap yard🔧🏍🚗
The BIGGEST Collection of Classic British Motorcyles In The World!
This week I take a trip to take a look around the Biggest Collection of classic British motorcycles to be found anywhere in the world.
We look through the evolution of motorcycles from the late 1800s right the way through to modern bikes of the 2000s!
We look through the evolution of motorcycles from the late 1800s right the way through to modern bikes of the 2000s!
มุมมอง: 752
วีดีโอ
Fixing My Super Cheap Abandoned Pit Bikes -Part 2
มุมมอง 3K16 ชั่วโมงที่ผ่านมา
Join me this week as I tackle the snapped subframe bolts on this stomp z3-140 pit bike and get everything cleaned down ready for painting and reassembling!
Completely Stripping My Abandoned Pit Bike To Fix It's Broken Frame!
มุมมอง 3.4K14 วันที่ผ่านมา
This week I'm back to fixing my super cheap abandoned pit bikes and it's the turn of the stomp. Join me as I fully strip down the bike and dismantle all the accessories all with the aim to fix the broken subframe and get the bike ready for a re paint!
I Get A Fire Damaged Motorbike From Copart As A Gift From Another Youtuber!
มุมมอง 9K21 วันที่ผ่านมา
This week, I travelled to Bristol to pick up a classic Yamaha Motrbike that's been involved in a fire! I'm joined by a special guest @AshRowland who won the bike at auction and kindly gifted it to me to celebrate my channels 1st birthday. Together me and @AshRowland give the bike a good look over and attempt to get it to run despite all the fire damage, but can we do it! youtube.com/@AshRowla...
Fixing And Flipping My Abandoned Pit Bike For a BIG Profit!
มุมมอง 6K28 วันที่ผ่านมา
Join me this week as I finish fixing up the first bike of my pair of abandoned pit bikes! I take a look at everything that I've done to the bike, what it's all cost and what I actually sell it for resulting in a BIG profit!
Fixing my Super Cheap abandoned pit bikes - Part 1
มุมมอง 10Kหลายเดือนก่อน
Going me this week as I being the work of fixing up my super cheap abandoned pit bikes, we begin this week with a quick wash down and clean up and then big into the Welsh pit bike to see if I can get it running and riding again!
Can I save this CHEAP Volvo from the scrapyard flip it for a profit?
มุมมอง 3.3Kหลายเดือนก่อน
Join me this week as I pick up a cheap volvo that was destined for the scrap yard and try to save it and make a profit in the process! Check put the topdon battery tester I used in this video here: www.ebay.co.uk/itm/386931336919?mkevt=1&mkcid=2&mkrid=7111680493023330&keyword=UK_youtube_11BT100&fbclid=IwZXh0bgNhZW0CMTEAAR1SydlL03Z9c4ecs6u0GG5yxS2PA90xXU4p9XyR73Pd-0EWfEFc8tM_Zeg_aem_1guYQ-896DIT...
Fixing and Flipping my CHEAP Suzuki Bandit, But what did it all cost?
มุมมอง 4.3Kหลายเดือนก่อน
Join me this week as we say goodbye to my cheap suzuki bandit as we clean it up and prep it for sale and I walk you through the costs of all the repairs I've done over the last few videos!
I bought 2 VERY CHEAP police seized scooters at auction, but just how bad are they?
มุมมอง 8Kหลายเดือนก่อน
Join me this week as I head to London to collect my latest winnings from the latest police seized vehicles auction. This time I've picked up 2 very cheap, very ropey non running scooters that have no keys and a few hidden surprises, but we're they a bargain or have I wasted my money once again?😅
Fixing everything wrong with my cheap suzuki bandit, but will it finally pass an MOT?
มุมมอง 4.7K2 หลายเดือนก่อน
Join me this week as I attempt to fix everything wrong with my cheap suzuki bandit and take it back for an MOT, but will it finally pass and be officially roadworthy?
Kitting out my workshop with stuff I bought from TEMU!
มุมมอง 36K2 หลายเดือนก่อน
Join me this week as I unbox and take a look at all the cheap equipment I ordered from TEMU to help make life in my workshop easier and more organised, but was any of it actually worth the price I paid?
I swapped my CHEAP 125cc motorbike for this 600cc Bandit, But what's actually wrong with it?
มุมมอง 9K2 หลายเดือนก่อน
Join me this week as I dig into my cheap 600cc Bandit that I got by swapping my 125cc lexmoto. We find out what problems this bike has if any and whether or not I can get this thing roadworthy on a tight budget! Special thanks to @SAM-zt2uy for sending me that parts I needed to get this bike running and riding after my disaster!
I bought 2 CHEAP abandoned pit bikes, But how bad are they?
มุมมอง 14K2 หลายเดือนก่อน
Join me this week as I give my viewers what they have been asking for and I buy not 1 but 2 pit bikes that have been abandoned out doors for over a year and see if I can get them running or not!
I can't save my vivaro from this problem! But what do I replace it with?
มุมมอง 2.6K3 หลายเดือนก่อน
Join me this week as my vivaro meets a tragic end and we take a look into my day to day life and my search for a suitable replacement for vivan!
I bought a cheap mini dirt bike on Facebook marketplace, can I fix it and make a profit on it?
มุมมอง 3.6K3 หลายเดือนก่อน
I bought a cheap mini dirt bike on Facebook marketplace, can I fix it and make a profit on it?
Levelling up my channel - I get a workshop unit!
มุมมอง 3.1K3 หลายเดือนก่อน
Levelling up my channel - I get a workshop unit!
I sell both of my INCREDIBLY cheap motorbikes, But did I make any money?
มุมมอง 7K3 หลายเดือนก่อน
I sell both of my INCREDIBLY cheap motorbikes, But did I make any money?
I Clean and attempt to MOT my 2 INCREDIBLY CHEAP motorbikes, But will they pass?
มุมมอง 6K3 หลายเดือนก่อน
I Clean and attempt to MOT my 2 INCREDIBLY CHEAP motorbikes, But will they pass?
Fixing my INCREDIBLY cheap motorbikes, But are they rideable now?- Part 2
มุมมอง 4.9K4 หลายเดือนก่อน
Fixing my INCREDIBLY cheap motorbikes, But are they rideable now?- Part 2
I bought a ridiculously cheap off-road buggy project, But was it a good deal?
มุมมอง 1.5K4 หลายเดือนก่อน
I bought a ridiculously cheap off-road buggy project, But was it a good deal?
Fixing my INCREDIBLY cheap motorbikes, But will the Yamaha finally run?- Part 1
มุมมอง 6K4 หลายเดือนก่อน
Fixing my INCREDIBLY cheap motorbikes, But will the Yamaha finally run?- Part 1
I finally finish my Lupo project, then Immediately break it again!
มุมมอง 7674 หลายเดือนก่อน
I finally finish my Lupo project, then Immediately break it again!
I bought 2 CHEAP motorbikes at auction with no keys, but will they run?
มุมมอง 15K5 หลายเดือนก่อน
I bought 2 CHEAP motorbikes at auction with no keys, but will they run?
I bought 2 motorcycles at Auction for an UNBELIEVABLEY low price, but how bad are they?
มุมมอง 73K5 หลายเดือนก่อน
I bought 2 motorcycles at Auction for an UNBELIEVABLEY low price, but how bad are they?
Is my £221 Lupo finally fixed and roadworthy?
มุมมอง 8415 หลายเดือนก่อน
Is my £221 Lupo finally fixed and roadworthy?
Fixing and flipping a mini motorbike, BUT can I make a profit from it?
มุมมอง 6K5 หลายเดือนก่อน
Fixing and flipping a mini motorbike, BUT can I make a profit from it?
I can't belive all these Classic American Cars are in South Wales!
มุมมอง 9436 หลายเดือนก่อน
I can't belive all these Classic American Cars are in South Wales!
Cleaning and painting my £150 motobike, but does it actually look any better?
มุมมอง 1.6K7 หลายเดือนก่อน
Cleaning and painting my £150 motobike, but does it actually look any better?
Fixing my £221 VW Lupo but now there's a big problem!
มุมมอง 6877 หลายเดือนก่อน
Fixing my £221 VW Lupo but now there's a big problem!
Fixing the problems with my £150 motorbike, but is it now ready for the road?
มุมมอง 2.1K7 หลายเดือนก่อน
Fixing the problems with my £150 motorbike, but is it now ready for the road?
That's mega some proper classics in there bro! Mad the old headlights are gas 👀
@@Damian-Davies mental ini imagine cutting about in the dark on one of them and your headlight runs out of gas 🤣🤣
The "Indian" is a thinly disguised Velocette. Floyd Clymer a noted author of all things automotive and also motor cycle related. He imported these Volocettes and changed them in to. Indian
How interesting! I'm not familiar with alot of the bikes and there's only a small amount of information there with each one but that is really cool to know 🤘
Great vid Sam well presented 👍
Thanks 🤘
That was so cool man might need to take my eldest a run down to see it
@jonesy4468 worth the trip mate !
@@SamsAutoAssortium looks brilliant by the way the bike you said you'd chop off your leg for are folding bikes they were used by paratroopers in the war for a quick getaway
@jonesy4468 that makes them way cooler now! I love that kind of stuff!
@SamsAutoAssortium if you watch the video again you'll see one actually in the case lol it would go well with the bike with machine gun sidecar 🤣🤣
Yeah I saw the one in the case I didn't click they were the same, just assumed they were similar types small folding bikes 🤣
A lot of smart bikes there. would love to go.
@darthvirago it's deffinately worth a visit!
has the bandit sold yet? if not bring it to scotland il swap my 600 katana for it 🤣
@mark-e8h3v it's not but I've already got a swap on the table up in Scotland 😅
@@SamsAutoAssortium no way hopefully the swap is something id be interested in 🤣😂
Ayy that corsa is sick bro! This is the first video of yours im watching but ive subscribed and im looking forward to more 😊
@scrillaofficial1435 thanks for subscribing 🙏 sadly the corsa isn't mine but I will be doing some work and some videos on it with my mate 🤘
If you are buying tyres anyway, wheels and tyres might be good value.
Yeah they aren't to badly priced as a set to be fair 🤘
Taps are for internal threads, dies for external.
Every day is a school day for me with this, untill I started looking how to do it I had no idea there was a difference 😅🤣
Absolute outstanding and the cars are within people’s budgets no bulls**t or waffling on just right down to buisness👌
@darylmc123 thanks I try to keep things moving and keep it all projects anyone could afford 🤘
Buy a new frame £87 with bolts and head set bearings
@SimonGoldsborough-zj3op where would I get that from I didn't find one at that price when I last looked 😅
Another great vid Sam ! looking forward to the end product !
Thanks! I'm very much looking forward to getting this one finished 🤘
At least it's all down hill from now on. Lidl do some tap and drill bit sets every so often. It has the right size drills for each metric tap. Worth picking up if you see them.
@paulbudford I'll keep an eye out for them, I have a bad habit of seeing something in lidl and saying I'll pick that up next time and by next time it's always gone 😅😅
Another great video, I hope all the hard work is worth it. Good luck.
Thanks! I'm sure it will be when I finally get it all done 🤘
Good content as usual! Wish l had your determination. You'll get there in the end. Good luck and keep at it. All the best.
Thanks🤘 hopefully I'm over the worst of it with this bike but I'm still yet to treat the rust and paint it 😅
Wow that wheel is a state holy christ good luck with that one Sam 👌 can't wait to see the finished bike 🤘 seen the bandit making a cheeky appearance looking stunning 😍 god I want that bike so bad 😂
Thanks! Yeah I think the wheels maybe to far gone but there's only one way to find out I guess 😅 yeahh bandits still here and waiting for you 👀🤣
@SamsAutoAssortium could maybe sand blast it to bare metal see if that would work 🤔🤞then paint it black like it was before, can't believe noone wants it would be a great winter bike haha wish it was mine but I'm still stuck with a 955i that's still being a bitch to try and start 😂
@jonesy4468 I was debating sending a few parts to the paint shop lads that are in the same complex as my unit but after pricing up all the parts I need for this one I'm not sure I can justify the cost of power coating 😅 it's mad it would of made an excellent winter bike for someone but I guess I'll just keep hold of it untill the spring 😅
@SamsAutoAssortium bet it would cost a fortune for powder coat 😮 you maybe have better luck in the spring bro 🤞 guarantee my 955i is still in parts 😂
@jonesy4468 I'm really not sure I know they charge like £70 for an alloy wheel so a few put bike parts shouldn't be alot more 🤔 I'll cross that bridge when I come to it though be a few weeks before the next pitbike video I got some other stuff going on the next few weeks and want some time to chill over Christmas 😅 hopefully it's not still in parts and you work out what's wrong with it 🤞🤘
Every video you make is another voyage of discovery, Sam, and I'm loving being a passenger!! Your channel's going to grow and grow!! Keep it up mate 👍
@@LuManUK thank you so much for being along for the ride 🤞 hopefully some big things to come for next year 🤞
you doing well sam ,for someone that,s new to this kinda thing . your getting there slowly but surely . i,m not going to tell you how i would do it myself . i,m enjoying watching you learn ,and sometime,s that means making mistakes . and i know your flat out at the moment ,with deliveries . so fair play m8 .
@gizmo1252000 thanks 🤘 I am getting there slowly but surely, this one has been fighting me a bit but hopefully I learn from it so that next time is easier 🤘
Fook them wheels of mate clean frame up with grinder and flapper disc
Thats going to be a fun little bike when it's done mate
@AshRowland I hope so, I'm looking forward to finally having a go on it then most likely getting it sold and hunting for it's bigger brother 😅
Haven't seen a Corsa B for a while!
Remember the red top gsi engines in them ❤
@@Joseph-g1git’s the 1.6 sport 👌
If you were brave you would drop the 2 liter Astra gsi engine in there
@@Joseph-g1g z20let going in mate 😂
@ 😂
Next time,use cutting oil to save the bits
I will pick some of that up it would be very handy to have we did use a bit of general engine oil I got knocking around, it did help a bit 🤘
Make sure you use acid etch primer on that frame, itll flake off in no time if you dont.
I’ve had to pause the video at 3:30 because of that stunner of a corsa b in the background 🤤😍my favourite car of all time mate who’s is that , iev currently got a z3 140cc as a protect bike , engine bore is scratched like hell , rear subframe has 2 mounting points for the plastics broken and everything
That corsa B belongs to a mate that a share the unit with, he's doing a bit of a project with it and I'll be helping out with a few things so there will be some videos to come with it 😉 good luck with your z3 project 🤘
Another great video mate I try to comment 2 times but I forgot, Probably best for new wheels for yours only around £120-40 for big wheels , that rear subframe will be pretty solid with bolts running through , can’t wait to see you riding this , these do about 55-60 depending on how much you weigh in 65kg my ones flew
@ryanking1770 thanks 🤘yeah I'm thinking new wheels I quite like the blue metallic colour ones, I'm not far off twice your weight so not sure how well it will go with me on it but I'm.looking foreward to taking it for a rip that's for sure! 🤘🤘
@@ryanking1770 mine mate 👌 1.6 sport with 67k on the clock. Cheers for the comment 👌❤️
Nice work Sam, keep going. With all that drilling and filing, make sure you don't come a dentist lol 😉😉 looking foward to the next video.
Banging videos fair play. And he's only a jack up the road.
You might not be out of your depth but drilling out bolts and temu extraction thing you must have known you’ve jumped into the deep end 😂 Awesome job. Nice seeing the before and after comparison with rusty part.
It's certainly been challenging but I think I'm through the worst of it now, although painting is going to be interesting I've never really done much of thaf that either 😅
Use locking nuts on the frame bud
Top tip.
It is over fueling quite badly given that behaviour and the amount of smoke it is kicking out
@andyc750 it was indeed, also I belive the fuel had some oil in it that was left on the funnel😅 fixed these problems now just thought it looked cool 🤣
Looks like the timing is out 😂
I think it was 😅 that ones fixed now but still got another one to go 🤟
😂😂 brilliant
😂
Mate good vid keep em up but please please plug the spark plug hole before u use the sand gun
Good video again Setting you a challenge Honda C90 next please Many of us wannabe mechanics out here play about with C90's There are some bargains out there and in your neck of the woods I'm sure you will find one You will flip it for good money
@guyonacub4335 I will keep an eye out for a bargain one as I would love to do one of them generally most are outside of my usual budget but hopefully I find a cheap one somewhere 🤟🤟
@SamsAutoAssortium Hi Thanks for your response Yeah they can be, but it's also down to logistics and you are happy to collect so you might just crack this nut Keep doing what your doing as you do it well
send the lock to a locksmith and get them to make a key from the lock,also that looks like an atiom battery, which does not like to sit around
I can't wait to hear it run after all that shit and crap has gone straight down the intake🤣🤣🤣 Block the intake off with a rag ffs when ur doing stuff like that.
Yeahh that wasn't a smart decision on my part 😅
Whack in a torx socket needs to be slightly bigger it'll get you out the shit. Will need new bolts though
Hey Sam! Loving the videos! If you round Allen keys or hex t piece bolts you can angle grind a notch in and try undo with a straight head screw driver not sure you’ll have access there though!
@luket_fit4971 thanks 🤘luckily they weren't that bad but I'll bear that in mind for future 😅
Depending how much material is left where you snapped the extractor you might get a hollow tile cutting drill over it.
Best video you have done yet , love when I get the Sam’s notification on my phone . Me and the missus order takeaway every time you make a new video lols . Keep it going Sam 💪🏽❤
Thanks I'm glad your enjoying 🤘
Also use a tile cutting tip carbide.. stick it in the drill it should go strait through bud on the engine frame mount
About 7 or 8 quid from screwfix
extractors are always a disaster waiting to happen, I refuse to have them anywhere near my shed, you can drill them out, cobalt or tungsten carbide drills will do it, a cheap answer is believe it or not a masonry bit as they have a carbide tip, takes a while but they will work, and do yourself a favour, throw any you have left in the bin, all you need is decent quality drill bits and a tap and die set
Funnily enough my dad said he has a set of masonry bits but they are special ones that will basically go through most materials so I'll give them a try 🤘
I had the same problem with mine with the bolts snapping in the frame the one that holds the subframe on i cut 5mm to 1cm off the and put a spacer in place and the threads luckly went right far into the frame no messing about, hope that helps
For quick cleaning of rusted parts cheaply you should give brick acid a go. Dilute to your needs and rinse well afterwards. Would get that bracket stripped in 5 to 10 minus.
I'll have to give that a try cheers 🤘
As soon as you mentioned a screw extractor i knew it was going to snap in the screw. They are a specialised tool and not really for this application. You wont be able to drill that out... Maybe if you can get access you can drill it from the back. Centre punch it first and go in fast and straight with a small drill. But dont deep enough to hit the extractor because then the small drill will snap ... Then try going through with a bigger bit wit lots of lube.... Or just cut the lug off and weld on a new one
Coming on well pal i love getting a beat up bike and renovating it back to health, I would have put something in the spark plug hole while cleaning it just to stop any rubbish going down it though 👍
Yeah I thought about that afterwards, I'm still 50/50 on whether I take the engine appart and change some internals but I may have to now just to make sure no debris went in there 😅
@@SamsAutoAssortium i wouldn't bother stripping the engine personally, just give it an oil change and should be good to go, they are pretty reliable these engines, based on the Honda C90 and C70 and they last forever 🤣
@limpjaffacake yeah that's why I'm 50/50 it was running fine despite it being abandoned but I was thinking of doing the z40 cam and checking the valve clearances but parts costs are adding up quickly so I may not 😅
do you know where i can get a cheap project pitbike in barry?
@@julianwoodward5360 sadly not if I knew where to get more I would buy more myself 😅
Another cracker, Sam. Can't wait for the next one!!
Keek going with videos 🎉
Thanks, I will 🤘
Love your enthusiasm Sam.
Thanks 🤘