ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2023
- Wood: walnut, maple, Osage Orange
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3OVNwtc 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
email: broinwood@gmail.com
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - แนวปฏิบัติและการใช้ชีวิต
Finally, I found some free time to edit and publish a new video.
I've been working almost non-stop for the past three months, but I'm not complaining because I simply love what I do!
Thank you all for watching, likes and subscription!
Sincerely, Nik!
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
You are working, you can feed and clothe yourself, you can keep a roof over your head, and you are not sick. Thank you for taking the time to share one of your beautiful creations with us. 👍👍👍. Be safe 🇨🇦
You are inspiring. I can't wait to get my CNC and get going.
Thank you! 🙌
,cheddar gfs evfe
As a fellow CNCer, I am Very impressed with your precision in your files. To get that good a fit, Amazing. I'm suitably impressed. Dat cnc dust brush though...dang, lol.
It has seen better days
Holy crap man, that’s crazy.
I’m a woodworker myself and this thing blows my mind. Amazing work
Thanks 👍
Honestly this video is the one that got me into cnc. Huge inspiration and hope to do some of my own designs in inlays soon.
Another amazing board gentlemen. That Osage Orange adds a perfect highlight to the board.
Taking your course on finding inlay parameters that you linked below was incredibly helpful to me. Thanks for making that available.
Thank you so much sir!
Beautiful board, the inlay is incredible
Absolutely amazing process to watch from start to finished product.
I'm a CNC machinist (metal). I only just discovered your channel and I'm extremely impressed with your work! Your work has opened my eyes to completely new possibilities in my trade. Thank you for what you do. You really are a master craftsman. Keep up the exceptional work and videos as they completely blow me away!!!
Thank you!
Would be awesome to see a full dragon done like this
Very clever. Great way of using creativity and cnc!
1000% Masterpiece !
This was a joy to see. Thanks for sharing.
That is amazing!! Great job bud.
Another awesome piece of art
Omg, beautiful..amazing work.
Absolutely gorgeous
Just fantastic as always. That touch of Osage Orange is the pearl that enriches the work and that I have seen used in your other beautiful works.
I am very fascinated by that essence of Osage Orange wood which unfortunately cannot be found in Italy.
Compliments. And congratulations also for the vector drawings
Thank you!
Incredible! Thanks for sharing.
Beautiful work
There's a sight for sore eyes!! Welcome back!
My god! Awesome. Beyond words
Brilliant work. ever thought about doing one with resin.
Wow so very cool amazing work
FANTASTIC!!!
Amazing work and I hope one day I can buy one
Excellent work 👏
Wow I love it "" that's ace I'd love to own that great work """
Looks like the Modern Samurai Project logo.
Once again, Wow!
That’s pretty good
Great work
Love ya work bro.
Excelente trabajo, muy profesional
Incredible.
Very cool result Bro. You are amazing)
Thank you!
mega awesome as always
Amazing
Thanks
Да Брат это что то!!! Результат бесподобен!!! Очень круто получилось!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Exceptional!!!!!!!!
Stellar work. Though I can't imagine anyone ever using it for it's intended purpose. I'd rather hang it on a wall.
impressive!
Too good to use
Outstanding
Amazing.🎉❤
Lovely
I love your channel and your job! I watched all your videos!!! What cnc machines do you use ?
Thank you!
I have two avidcnc and stepcraft.
Amazing cnc machine
Cnc machine masterpieces.. 😂
Yes, thanks
Capoooo
how much for the files ???
Огонь 🔥🔥 🔥
Hello, you do some pretty amazing work - thanks for sharing it through your channel. It looks like you have a Stepcraft Q series CNC - did you have any issues with getting it squared up? I've recently received a Q404 and I cannot get this thing to square up for anything. I've done extensive testing and sent the results to Stepcraft, and they are looking into this, but thus far no solutions. Just curious what experience you've had. Thank you for your time.
Great one, thank you for sharing. Just curious, why do you use what looks to be a 1/4 up cut when removing the excess material from the inserts? What not a larger fly cut? Thank again!
Thank you! 1/4 bit helps me to avoid chips.
This is a masterpiece. For me, I would never use it as a cutting board
Wonderfull!!!!
Question... what is your machining depth in the butcher block?
Thank you! 6mm
Great workmanship and an outstanding project.
What are the board dimensions?
Thank you! 24x18x3''
How long did this take, and how much would it cost?
Do you not vbit cut first to avoid blowout?
Impressive work bud, what software are you using?
Thank you! Vcarve pro
@@Broinwood
Ty, I'll give it a look.
how long does it take to cut the plug and pocket?
Not sure a machine carved cutting board is great work.
😲🤩👏🏾👏🏾👏🏾👏🏾💖💖💖💖💖💖💖🏆
Гарно.
This is great. the only thing I don't like is your name on the front. It's cool to brand your products, but do it in the back.
Do you ever use dyed wood to get additional colours?
no, never.
@@Broinwood Interesting. Why is that?
I would never cut anything on that “cutting board”. It is too nice.
how much does something like this cost to make?
What if he had filled with metal?
Бомба
Combien de temps d'usinage pour mâle et pour femelle? Quel logiciel..
ini nama mesinnya apa?
Harganya berapa?
Terima kasih 🙏
While being fun to watch and a marvel of CNC tech, my heart bleeds for the loss of the inlayer as a craftsman who could do this and more with hand tools, a generation passes and all the skills are lost to the machine and the need for speed.
Agreed! Look, I’m awesome at programming my machine to make cuts for me!
Why ppl like making cutting boards? Does it really sell?
yes
😎👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I cant cut anything on it ....!
Great video.... what a fine piece of work. Love it..... but 15 minutes with the same 8 bar loop?? Really? Make a video just with the raw sound. This would fit your video much better.
Ptetty
Cool,but who in the right mind would use this for a cutting board at $1000 ??????
In my opinion? The video would have been better represented with out the music, on repeat.
The "wood cutting" sound process sounded much better represented and as ASMR. And whatever background noise was happening, in that workshop.
I buy for 100 dollars 💸
meh, nothing special, maked on CNC. if u do the same using only chisels, thats make respect
Does really anyone use cutting boards like this to cut their meat or fish? I guess very strong no xD
It's a beautiful board, but it's made by a computer driven machine. No craftsmanship skills needed