$200 Blaster Rebuild | Budget Blaster Rebuild
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Tires: amzn.to/3vEgjHk
Reeds: amzn.to/3E9cf4Q
Bolt kit: amzn.to/3CaZNAR
Head Stud Kit: www.ebay.com/i...
Top End Kit: www.ebay.com/i...
#Blaster #yamaha #2stroke
Shop: www.timemachin...
Insta: @timemachinesatvs
FB Group: / 253442778458579
Send us your videos and non weird mullet sh*t: timemachinesatvs@outlook.com
Send us your love letters to:
TimeMachines
P.O.Box 210
Rhome, TX. 76078
Prices on these finally coming back down to earth. Sold all my toys during the price hike. Now it's time to buy again.
Haha yessir
@@TimeMachinesATVs Next time use automotive plastic/urethane bumper cover stripper. Less agessive and is meant for what you were doing. "SEM" is one brand that sells an aerosol version.
Awesome Mechanic Wisdom shared...Also your buddy had that whole engine apart on the driveway..That takes some muy grande cahones.
Yeah no shit. He was 100% committed it was back together that evening. And now sounds/runs excellent. Compared to before
gave this a full watch start to finish.. loved it!!!!!!
Appreciate ya travis ! Might post another today
Always wanted a blaster when I was younger but my dad hated two strokes. Now I’m Looking for one for my boy. Prices seem to still be jacked found one that looks like a complete turd with spaghetti wiring hanging off it and add says it needs a top end for $600. At $200 this would be a no brained to pick up. Good find and good video my dude.
Yeah I bought one of those reed boots said it was for a blaster but didn’t come plugged off but I bought one of those tach out performance heads that’s a 20cc dome I like it
Also turns carb slightly away from airboot but it worked some how
when i get a blown up quad i put the quad up on the grab bar and power wash the crank out then soak the crank in two stroke.
Gotcha
That’s why you want to have friends like that , good friends , he has stuff all over the yard , he’s fully committed on this one 😂😂😂😂😂 I laughed so hard
Lol not sure where the part went but i said he will get it done. Thats all that matters rain or shine etc. those r the typa friends ya want
Parts in the link u gave us really jumped in price..$950 for the top end..
Thanks for the heads up
With that torque wrench adapter you have to do a calculation. Just setting the torque wrench to the torque spec does not make it correct, with the extra length of the wrench gives more torque and thus that was more than 20 ft pounds.
At least theyre all even
I have a Yamaha blaster200 2002 and it won’t stay on in Neutral it starts first kick but just won’t stay on any suggestions please and thank you ?
Adjust the idle?
@@TimeMachinesATVs I’m gonna try that thank you
Put in all that effort to install a Chinese top end… shameful. They are known for exploding.
Okay tuffmuff
I’m just saying, the Chinese top end has a lot of casting flaws.
Get ALL uP ALL thE Way iN THeRE !!!!Repeat this ProceSS!!!!!
Yessir. Dont quit till she says youre done
@@TimeMachinesATVs thanks man
25:00 he was spot-on on not using that wrist pin bearing. Those only last about 20 hours before they end up heading out the exhaust. Get a reputable name brand needle bearing from all balls or wiesco if you need a new one
Yessir.
Man that is genius having oil in a soap dispenser. Blew my mind! 21k coming in hot. Amazing video packed with info and good laughs! And I can’t wait for the 350EX build!
Coming soon jonny! I usually like a condiment bottle better but then the oil get contaminated after a while. Dollar general 1$ oil dispenser lol
You from.nc
Nice I have an 06 blaster
Never sell it
Hey, I was the one that commented about memories of my LT80 on the last video. If you get a REALLY clean used LT80 of any year (Preferably a yellow with blue seat one, like my 88 as a kid) post if on the tubes, so I can see. I will most definitely buy it, and either drive the 1000 miles to get it with my son, or have it shipped. He just turned 8 and I'd love to get him into the hobby, I was around the same age when I got my brand new 94 PW80 and 1988 LT80.
I will do. Theres a few lt80 videos on channel as well!
You just taught countless folks how to get up in there. I'm so excited for the 350x !!!
Haha appreciate ya hanky comin soon!
Rad dude. Save Sport Quads!
Keep it Yamaha 💯 boys! 😀 Got me a legendary '11 YFZ450X Bill Ballance (I'm orig owner..quad has only 4hrs on it! It's now fully prepped to race locally). Picked up a '21 Raptor 700R-SE in June. My dream machine. Worried Yamaha may discontinue soon as I've heard rumors. *Btw, both the YFZ450R & Raptor 700R are selling like hot cakes even @ $10k* . - NW Ohio
Love my yammer hammers
I had the same thing happen with mine the piston was to big for the cylinder just like that the Chinese top end kits suck.
Yeah that sucks
Chea dudes. Rebuild knowledge is key when you're hard on the gear. These are the China kits you got that you returned from the video wear buddy forgot to wear both shoes lmao
Lmao. The send backs were
Best shit on TH-cam to watch thanks for knowledge brother Jarod your very good at explaining how to tear bikes down n short cuts .Can't wait to see you at 50 k on here it's coming in time I'm share your videos
Great content as usual, funny the seller changed price for top end kit to $900 when using that link. Lol smh
that's dirty...
A piece of advice if people don't know is to make sure you have the correct sparkplug in. I had the wrong one in apparently and blew a hole in the piston.
Always! Too long = piston kisses
what is the approximate cost of a 1995 yamaha blaster in the united states?
It varies. Between 800-2500$
Just got a nine running blaster for a Chinese pitbike , confident I can get it running
Nice trade!
I got a blaster in my back yard need crankshaft I’ll sell it for 200
You in texas?
where in TX are you located? I got a blaster I want to bring back to life
Dfw area and I just buy and sell, don't fix for anyone lol. Unless you want me to rebuild the motor, just mail it to me
How do find bike for such cheap prices tell use your secret😂😂
Make good deals with locals and over time word will spread
Awesome video. I have that exact same blaster, I believe a 2004. On mine my piston skirt broke in a lot of pieces breaking a piece of my crankcase off. I got I welded and bought a new OEM piston. I’m excited to get my blaster up and running. All I’m waiting for is a oil seal.
How do I know what year blaster I have? Other than the headlights how do I figure out exactly what year I have?
Where are you located? I’ve got a raptor 700, only sparks
Ft worth texas
Thats the most well packaged rebuild kit ive seen lol😅
Appreciate ya, I agree!
Hey I'd like to know if you have 2 x in hoodie with alien 👽 on it?
Yep www.timemachines.shop
How to buy Yamaha blaster second sparepart on your garage?
I want to buy completely cylinder of Yamaha blaster
I just got a 2002 blaster so if I take off the Air box Lid that will help it run better
not always, thanks for watching hash!
@@TimeMachinesATVs So is it better just to keep the lid on
Do you know if you do tors delete on Yamaha Blaster do you need a different throttle cable or does the stock one work the same
Works same but if ya want full delete need cable and throttle cap. Otherwise unplug it all and send it
@@TimeMachinesATVs thanks I really helps it has the full delete kit when the guy I got it from re-ran the old wire they ran up by the exhaust.. and then put black tape around it
Blaster blaster videos please, love you guys´s videos here in Costa Rica
Get up in there!!
More coming!
Hell yeah you guys awesome rebuild after the China malfunction that's aggravating big thumbs up y'all👍🏽👍🏽👍🏽👍🏽👍🏽
Haha appreciate ya roy. Lots more coming
you're over torquing those bolts. if you're using the motion pro adapter thing it needs to be at a 90 degree angle to the wrench. if its straight out like at 29:45 you're adding leverage and throwing off torque specs. just so you know
I want this completely cylinder and head for swap my motorcycle 😣 but in my country do not sell this atv
Wasn't it easier just to take the engine out of the four-wheeler instead of flipping an upside-down this happened to my Yamaha Blaster we just removed the engine
Did it take you 30 seconds to take the engine out? Flipping the quad over is about as easy as it gets for me
I'm almost 5k into trying to fix mine. After all that money and found out a few weeks ago, the crank case is cracked and that's been my issue. Only got one to ride with my dad on his blaster. I could've bought 3 blasters with the money I put into mine. Such a mistake.
Man that sucks. Leakdown test may have helped. Usually will show ya where case is leaking. Important tool for blaster trouble shooting
Hey brother I don't know if I missed the video or if you made one about it but I was wondering do you still have that rmz250 Big Bore I got a 2004 RMZ 250 in great shape I'd love to have another one
It sold
So did you turn it upside down to get broken pieces out? Part of my piston broke off and I haven’t found it up too you think if I turn it upside down and do the same it may fall out? It still a good crank I’d hate to break it open to just get that piece
I just got a 01 blaster free I'm watching you fellas to rebuild her and have it screaming once again she striped down and ready for paint now
I think you are supposed to have the tool at 90 degrees for the torque wrench to be accurate. Thats how it is for the AR barrel nut anyway. Great vid!
If they are plus minus 2-4 lbs but even that works fer me lmao
When you were spraying that shit, you should've been playing some Ramones.
🎶. Now I wanna sniff some glue... Now I wanna have something to dooo! 🎶
Lmfao
Hows it going! On my blaster it been sitting for almost a year. cleaned the carb and for some reason the gas dont go through the carb. the bowl is dry but gas comes out the tank?
You sound exactly like Joe Rogan lmfaooo you could actually trick people with that ya know🤔🤫
Nice rebuild video. Digging that new hair do as well!
Haha beards gettin trimmed next
Honda oil in the Yamaha im surprised the poor blaster did not vomit lol 😆 😅 😂 just kidding love your videos have great day
Lmao itll live
@@TimeMachinesATVs LOL 😆 😂 🤣
Hey guys thanks for the content. I enjoy watching all your videos but this one helped me tremendously because i have a 95 blaster and the top end just went out I ordered the wiseco rebuild kit. I hope that's a good one because I have no idea what the hell I'm doing. Thanks guys keep it up
Have you rebuilt it ?
Nice vid
Appreciate it rowlan
I've done so much work on cars crawling around in the muddy snow working out of a little shed. I'm greatful I have a garage now and switched cars for bikes and quads.
Same here !!
Damm right she's done! Sucks you had to go through that though. Now you know and knowing is half the battle, GI joe!
Lmao for sure it is!!
🤘🤘🤘🤘🤘🤘🤘🤘
I wish I could find one for $200 bad ass can't wait for more blaster videos
we got blaster videos for days, and more to come. thanks for watching Stephen!
@@TimeMachinesATVs your shop is bad ass can't wait to leave California
Hell ya David! I'm sure the neighbors are luvin ya!! That's a true mechanic rite therrr!! Turned his front yard into his shop just to get his truck done!!
Great job on the rebuild of this master blaster!! Ya always do great work bro
Haha no excuses!
I love how you did those tires! Lol Blasters are awesome machines.
Best way i aint fkin around for 2 hrs tryna change these. Support local business lmao
@TimeMachines Whatever happened to blake?
Quit showing up
@@TimeMachinesATVs damn dude. If you ever need someone just to yell and throw stuff at, lmk. Ive got thick skin once the 2 stroke starts burning. LOL
Are those oem rims with aftermarket tires?
In rear I believe
We just got one for my check. How do I mix the gas on it like what gas cans should I get to mix the two stroke?
How much you charge to do bikes
I dont service them for people sorry. We buy them as is then fix em.
You have to have the torque adapter at a 90 degree angle to achieve proper torque, or use the head length chart to compensate if using it straight on
sweet 1000 times better thats a nice bike
Thanks craig!
Ebay all the way. You and your boy doing a great job. Blaster was black and now white...what... Like that 1 wheel wheelie. Good job guys
Appreciate it dion. Had to get rid of that spray paint job
Got my first 2 stroke, all original 89 quadracer 250. It’s be cool to see one on the channel eventually 😎!
He has had some on the channel, search thru his old videos.
Have a few on channel ! Nice white 89 made video of a while back
Would you rebuild mines 🤔☹️
Yep. Timemachinesatvs@outlook.com email us
I like your shop, bud -is that closed cell insulation blown in there? How thick did you go? Good vid.
1.5”
Yea ive used a few ebay kits before not bad for the money. Screw amazon lol never use em. Great video bro like always! Stay up in there and be safe
Appreciate it matt. More coming this week
28:38 - "Thats why I slapped you in the face..."
Dude, wtf.
Up in my neck of the woods. I live about 15 minutes from Decatur Tire
Haha same here
Thanks for all the tech tips! Great video!
Hell yeah more to come
TimeMachines where should I get a top end rebuild kit
Doing things cheap is one thing but when you're working on things for a profit and putting your name on things it should be 100% quality Amazon is not quality just my opinion
Gotcha. Thats what happens when everyone lowballs people bro.
Yeah I hear you brother and don't get me wrong I love your vids trust me I get in there
I just got the same blaster, 2004 white with red frame. It’s a beast just won’t idle at all, going to try to drill a new idle screw because previous owner removed the Tors.
who the hell disliked.. go somwhere then ya know!!!lol
Haha some 4 stroke fruit
Enjoy watching your videos man I learn something everytime I watch your channel
Thanks gavin!! Lots more to come.
Was on a blaster this weekend with a big bore kit and I really enjoyed it .nice find that should sell fast take care guys
They are my favorite kevin! Appreciate ya bro
I definitely agree don't use bearings that sound like a maraca LOL
Lmfao for sure
get up in there skunky funky
Haha u know it dwalker
If I buy a 28mm carburetor do I have to worry about the Tors system delete kit?
What carburetor would you recommend?
Hey you guys are good with 2 strokes, I need some help
Haha when you said now You know why I slapped you in the face
Sweet video, I always learn something from you, appreciate it!
Thanks shawn
I weigh 240 pounds and am about 5'8 I was thinking about one of these to rip around the yard, ride trails and ride with my kid with cause they're super cheap to rebuild. I'm considering one of my bikes for trade for one... Contemplating. Do you think I'm a good size for a blaster or too big?
Brotha what 2 stoke oil and what ratio do u use
Depends on machine but generally 32:1 for trail riding. I like castor or klotz maxima rtc
It's for a blaster
Haha what made him have to strip his truck down like that in his driveway?
Cam was all ate up and running poorly. Lifters shot
I really like the blasters they really awesome
My favs
Do the tires you bought fit on the stock blaster wheels?
You guys are great love the Channel you do great work so keep on keeping on
Appreciate it tommy !
Next time use automotive plastic/urethane bumper cover stripper. Less agessive and is meant for what you were doing. "SEM" is one brand that sells an aerosol version.
Nice blaster,she runs good now after getting up in there,love the channel!!
Thanks bobby! Blasters are my favorite
Yeah buddy
More coming audi
Best video thus far great work time machines best atv content on the interwebs! 🔥
Thanks flower power!! Lots more coming
Those motion pro torque adapters are awesome. Wish I had got mine years ago
Yeah they’re necessary for sure
Awesome video! Good information as always. Get in there boys!
Appreciate it tom
Get up in there buddy! Love the vids can’t wait for the X!
Coming very soon!
Of course you had to use blaster on the blaster !
Lol
Get up in there !! 🤘🏼how big is that shop you built ?
30x50
I need to pick up another blaster! Such a fun little machine
They are a lot of fun!
Schaawiiinnnngggg!!!
Yessir