How to add volume spacers to Rockshox Super Deluxe Select + 2020 / Inner seals regrease
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2020
- ★Check description for more info★
In this video i will show you how to install volume spacers to Rockshox Super Deluxe Select +, model 2020 and regrease inner seals and O rings.
I will do more content soon, mainly about trail and enduro riding,
bike maintenance and other stuff so consider subscribing.
★Tools needed to add volume spacers:
Tokens (Volume spacers)
Rubber strap wrench
Valve tool or screwdriver to let the air out
Shock pump
★Tools needed for reagreasing:
Allen key (depends on your bike)
Rubber strap wrench
Valve tool or flat screwdriver to let the air out
Sram butter or Rockshox Dynamic Grease
Grease for pivots (Something like Parktool HPG -1 or other. If you have carbon frame use carbon friendly grease!)
Medium strength threadlocker
Isopropyl Alcohol for cleaning
Shock pump
★Tokens used:
RockShox Deluxe / Super Deluxe Volume spacer Kit from 2017 and above
★My bike:
Canyon Spectral CF 7 2020 XL
★Camera:
Sony a5100 with 16-50mm lens
Sorry for lighting conditions and my speech I am new to this.
Check out specs and manual of this shock : www.sram.com/en/service/model...
#rockshox #service #superdeluxe
If you have any questions write comment below. - กีฬา
Inside of air can looked pretty dry to me. This video is missing details about applying Rockshox Seal Grease (the SRAM Butter grease works too) to the seals at the bottom of the air can and the Rockshox Plush Dynamic Light Air Can Lube that goes in both the positive and negative chambers of the air can. Both grease and lube are included in the 50-hour service kit that the presenter showed; but, did not use.
after 2sec i knew it was czech/slovak :D nice video :)
Great
I need to add spacers to reduce stroke length from 65mm to 57.5. Where can i buy these spacers??
is this the same from the rockshox deluxe select +
NIce video. Have the same rear shock on my YT Jeffsy 29. What is the part number for the service kit?
i have this one www.bike-discount.de/de/rockshox-deluxe/super-deluxe-service-kit-a1-50h
00.4315.032.615
Great video!, is it necessary to regrease or I can just unscrew the air can, put the spacer and screw it back again
You don't have to do it when adding spacers, but i did it anyway.
Dobry den. Prosim Vás, ta modrá páčka na zamknutí a odemknutí. Jde tim úplně zamknout tlumič, že se ani nehne? Děkuji
Hello Martin,
what is the purpose of adding spacers?
Eric
Your shock would feel stiffer and if you do a lot of jumping or if you are a heavier rider it keeps the shock from bottoming out all the time. Also it depends if you ride trails of hard enduro or DH courses. i ride mainly trails and i have 3 tokens (maximum) i weight 85 kg and i like to ride fast and aggresive.
Great video man thanks for doing this. What was the biggest reason you wanted to do this?
Your shock would feel more progressive and if you do a lot of jumping or if you are a heavier rider it keeps the shock from bottoming out all the time.
@@martinnovak5843 ah ok gotcha that’s kinda what I figured. I’m 5’9” (175cm) and 79kg would this be an upgrade I should consider? I do like to jump quite a bit.
@@felipepeters9723 yeah of course , try it i have 85 kg, 188cm and got 2 tokens in the front and 3 in the rear shock, i find it okay when i ride steeper trails or jumps. But, it depends what you prefer.
You have put your third spacer above one which has a small rubber ring in front, doesn’t it means that you have to put another small rubber in front of the third spacer also? (Before you close the metal disc-ring).
I hope you got what I’m trying to ask..
Hi Andre, there are not an o rings between volume spacers. So that means you add Token1 - Token2 -Token3 and slide Washer - O ring
What i found in shock manual:
Bottomless Tokens: Clamp the shaft eyelet into the vise.
Move the bottom out washer and o-ring away from the shaft eyelet,
then snap the token onto the damper shaft with the tabbed side facing
the air valve. Slide the token down the damper shaft until it contacts
the other tokens or the eyelet. Slide the bottom out washer and o-ring
onto the tokens.
Install up to three Bottomless Tokens.
If you are not sure check servise manual or ask somebody in your local shop.