I’m glad I decided to do the videos. I hope it helps some of the guys that are having troubles with the update…. Thanks for the encouragement my Friend!
I put my planes into SAFE mode to check the gyro response. If that option works like that if you don't have SAFE enabled, it would be easier to tell what the surfaces are doing. I take the prop off when setting up my planes. To check the gyro direction on the rudder, you have to open the throttle above 25% to activate AS3X. If the Gyro Response utility makes the rudder move without opening the throttle, that would be good. I don't go to a new restaurant until they're been open for at least 30 days. So, it'll be about a month before I install the new firmware.
Thanks dkr sharing this video. I have this receiver in a new E-Flite A10. Will I be able restore the current configured settings to the receiver after upgrading to 3.x? AS3X+?
I have 4 updated So... far! only 1 needed me to factory reset it again. FM was not functioning properly. model names in the programmer seemed to have limited characters on some recievers.
A bit off topic here but I noticed that you had a multi servo connection block from the wings to the receiver, what did you use for this? I have been looking for a solution for while as the "rats nest" is doing my head in 😆. Maybe another video showing this?
Thanks Eddie great video!! Quick question..So if I just do a factory reset on my receiver from my Transmitter it will automatically upgrade it to the AS#X+ firmware? I don't have to download it from my laptop?
Hey Eddie, another awesome video of the firmware update of the AR637TA! Well explained and filmed for each step of the way! Thumbs up!
@@Cadillacstsv06 you’re too kind… thanks my Friend!
Thanks for a great video, Eddie!
Nice video Eddie, thanks for posting it 👍🏻👍🏻
I’m glad I decided to do the videos. I hope it helps some of the guys that are having troubles with the update…. Thanks for the encouragement my Friend!
Excellent, I just started playing with the nose wheel gyro.
@@notoo7 I’m going to check that out tonight.
Good explanation and video. Thank you for doing this video.
@@rlbutterfield thank you… I hope it was able to help you.
Eddy great video on setting the RX + Jeff in LA USA
@@JeffinLowerAlabama thanks my Friend!
Good video thank you 😊
@@feelgooddany thank you for the comment!
Yes awsome. Good information. I crashed my t28 2.0 i forgot to tighen a screw lol, waiting on a new one from horizon
I put my planes into SAFE mode to check the gyro response. If that option works like that if you don't have SAFE enabled, it would be easier to tell what the surfaces are doing. I take the prop off when setting up my planes. To check the gyro direction on the rudder, you have to open the throttle above 25% to activate AS3X. If the Gyro Response utility makes the rudder move without opening the throttle, that would be good. I don't go to a new restaurant until they're been open for at least 30 days. So, it'll be about a month before I install the new firmware.
Thanks dkr sharing this video. I have this receiver in a new E-Flite A10. Will I be able restore the current configured settings to the receiver after upgrading to 3.x? AS3X+?
I have 4 updated So... far! only 1 needed me to factory reset it again. FM was not functioning properly. model names in the programmer seemed to have limited characters on some recievers.
I have factory reset 3 of mine so far because they were all BNF receivers. Not sure about your other issues…
A bit off topic here but I noticed that you had a multi servo connection block from the wings to the receiver, what did you use for this? I have been looking for a solution for while as the "rats nest" is doing my head in 😆. Maybe another video showing this?
@@joemusto5973 good pickup… yes it is an Electro Dynamics unit. I believe it is a 4 servo unit. You will need 2 of these sets.
@@joemusto5973 www.electrodynam.com
@@eddieksrc Thats great Eddie, thanks for the reply. Weathering on the plane is awsome btw 😀
@@eddieksrc Thanks again Eddie, looking to see if I can source one in the UK, or they may even post to me!
@joemusto5973 thanks buddy…
Thanks Eddie great video!! Quick question..So if I just do a factory reset on my receiver from my Transmitter it will automatically upgrade it to the AS#X+ firmware? I don't have to download it from my laptop?
Yes you need to watch my first video because you do need to download the update to your receiver.
th-cam.com/video/HMRM8_eMwzg/w-d-xo.htmlsi=-itdn0kB749_CduX
Ahhh yes ...didn't see the "part 2" ...need more coffee!! Thanks again! Keep up the goodwork.
Can you adjust the safe angles? Pitch up 50 to 60?
@@TheRyaninspokane yes, that is my understanding
Of course you can.
Did you update your tx for 20 channels?
Yes I did update the TX