Making a 1/5 AWD V8 RC Car w/ MANUAL Gearbox! - Engine & Transmission Installation
ฝัง
- เผยแพร่เมื่อ 30 ม.ค. 2025
- ►Get the engine here!
Toyan V8 engine ➜ bit.ly/3V14CG3
Toyan V8 Parts ➜ bit.ly/3ObRhZg
10 Must-have Engine Gift Guide➜ bit.ly/3TJDwCb
Other V8 engines ➜ bit.ly/3Li50KX
-------------------------------------------------------------------------------------------------------
I finally managed to get the v8 fitted to an AWD chassis with the manual transmission. The centrifugal clutch will be upgraded as this one cannot withstand the weight of the vehicle, it will just slip.
Also the universal joint on the engine's side must be improved as this one is quite flimsy.
-----------------------------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90
Your level of craftsmanship is incredible
Truth.
Especially if you take into account everything is 1/5 scale meaning all his measurement are millions of an inch
@@greatestevar well I have to disagree as someone who works in tool and dye we do everything in thousands of a inch as mm are to big
@@mikehughhawk wait until you hear about microns
@@HitLuca94 we were taught in micron but in Canada all the old school millwrights and tool and dye guys use thousands of an inch.
But yes tell these kids about microns as that type of tolerances have even less room for error.
Finally someone installed this thing on a chassis, getting kind of old watching people run them on a stand, this guy is an amazing machinist, thumbs up! 5 stars over and over, thanks for the video.
Exactlyyy
fr
Seriously!!
I didn't know there were legitimate scale engines in the RC world like this. This immediately has me imagining a true scale Corolla Trueno with a DOHC 4 cyl if one exists, rwd, a true scale represented drift car. I've seen the RC drift cars for years but electric doesn't excite me and nitro always sounded to annoying and loud. This actually sounded like a real engine but smaller. Wasn't annoying at all. I'm subbing!
Not sure about DOHC but there are small 4 cylinders out there for a while now.
@@MiGujack3 this v8 is already dohc
@@yuryv.2188 no it isn't. the other cam pulley is just idler wheel on these toyan engines and there's 1 camshaft under the valvecover :)
I know this feeling so well, I have the same feeling for motorcycles too that all 2strokes make the same annoying sound and 4stroke 2cylinders sound like worlds longest wet farts but 4cyl+ 4stroke bikes sound like heaven :)
Same
This is more than just a build. This is an artpiece. Brillant work Johnny, Bravo!
I'd call it jewlery
If you want art piece, look up Real Scale size ferrari... the guy went so far as to make a scale Ferrari down to even valves and valve springs, running gages and everything
Someone needs to build a multi engine full size mini car. 2 v8s for each tire
@@Stallnig Much more than that.
Your builds are the absolute best when it comes to these nitro rc's, always next level, incredible!
As always - top notch engineering, well filmed and nicely presented. Cheers! :)
Never built one of these but have built plenty of off-road vehicles but I can totally respect the amount of time and craftsmanship that is involved to build these little guys. Really not any different than the full size version other than bigger. You have my respect there sir.
So excited to see one of these motors actually put to use instead of sitting on a stand. Craftsmanship is incredible, watching the gearbox in action is mesmerizing!! :)
Every time I think this guy couldn't impress me more with his machining and engineering skills he does it again.
He stole tamiya transmission. He didn't invent anything here just stole the stuff from other makers.
@@droneman8998 wow. you seem upset.
@benjaminkriebel3569 not upset, just don't like when people say they invented something that they ordered online. It's actually pretty hilarious.Good day!
@@droneman8998 lol, nobody said anything about inventing anything.
@@ZJMK605 that’s what i’m saying lol
I agree with everyone else’s remarks. Very cool and interesting/ entertaining to watch. I know there were many hard thinking hours put into it that us viewers got the luxury of not having, we just got to relax and view the coolness of it. Thank you for sharing with us.
Wow Johnny! You have some amazing projects! Can’t wait to see the end results!
Talent, ability, vision, experience. All are obviously amazing and the sound of that V-8!!! Man-o-man!!
Glad you chose the RC car to put that in. You do amazing work, and I like watching your stuff. Can't wait to see the first run with that thing. Keep up the great work. Thanks
Awesome engineering and fabrication. Job well done. Can't wait to see it run on a track.
This is what I used to dream of when I was messing around with single cylinder, centrifugal clutch nitro's back in my teens. It's insane that this is now a reality - Every time Jonny makes something and it slots perfectly into place is like ASMR for me 😅
There is absolutely something mesmerizing about watching a master at their craft.
those are still around.
What a genius. Absolutely love it. I am an engineer myself.
I’m amazed at the quality of your work. I am into racing RC boats and some of our guys put thousands of dollars into them in their works of art. This compares with them. It is beautiful. Can’t wait to see it run.
The RC industry is making massive leaps and bounds. In the last 5-8 years alone the new products are amazing. And those Toyan engines are getting better by the day. I remember being pressed by their early one and two cylinder engines. Now they have a V8. The industry has really given the advanced RC DIY guys a lot of cool options.
There was a model v8 20 years ago not sure what happened to it.
Years ago I graduated from watchmaking school, and worked for sometime in that industry. I am really impressed by your attention to detail and skill.
6:36, you need to secure the pneumatic fitting holding the bowden tube better. It can help with stringing and less retraction.
Love your builds. Can’t wait to see this monster rip down the road.
Beautiful work, Johnny! This thing looks like it'll be a blast once finished. Can't get over how good the engine sounds too.
😊😊
😊
😊
😊
😊
I occasionally build stuff myself but your level is just incredible
These videos are so satisfying
For someone who just got into the rc car hobby a year ago to a real miniature nitro engine that an authentic original handmade looking functioning like a freakin v8, transmission with gears,radiator, coolant reservoirs ... my mind is blown sir this is like art your craftsmanship is 🔥🔥🔥 this is my first time seeing this I have to go watch the other videos leading up to this and diff waiting to see the end of project.... wow
Masterpiece of engineering! Best example of full functional RC I've ever seen.
I really enjoy your videos and even more the passion involved in every single project. No words nor invasive music in the background... Just you and your magnificent piece of art. Just an awesome channel, keep it UP!
The videography, amazing parts fabrication, and creativity is astounding to me! 👀💛
The Sound and Working of the Machine just gives thrills.
Awesome Work!!
On of the best fabricators, designers, and builder’s on here. You do incredible work! Always excited to see what you do next.
@Jason that man literally made a custom v10 engine, what a legend
@Jason to be fair he did say "one of the best"
The sound of that motor is SICK!!!!
Personally I woulda use a bearing for the driveshaft support! But all in all your level of detail and dedication is fantastic!
Finally someone did it! I’ve been thinking this sense day one when I saw those engines. Nice work.
I love to see the craftsmanship. Awesome. And the model even works! 🙂
Could you tell me what the name of the chassis is because I am planing on making one of these cars
You could use an Arma granite and take out all the stuff and put a metal chassis on it
The engine is toyan
looks like it might be custom
@@patricedelacruz6906chassis not engine
It looks like he took it out of an existing RC car because the underside is already scratched
Great project!
That radiator shroud though!incredible flow!I am not sure about the dog engagment rings health after a few runs.they used to fail on race car even when they are hard steel-chrom.i believe they will need to be adressed as a steel parts soon.specially when the throttle-torque reductiom religns on manual controll(hand)
Cheers! Keep the great projects coming!
Titanium
@@tanyav7888 This titanium revision is officially approved by me.
Shit, let's get this out of the way now.
All proposed revisions to replace any existing part material to titanium is hereby approved.
@@josephcitizen4195 My approval as well. Unfortunately titanium is extremely difficult to work with especially in a home shop. Needs specialized and very expensive tooling.
This was already a Roy Hobbs "The Natural" home run of a build. However, when you showed the inner workings of the gear box I was smitten. Fabulous work and keep em coming.
For someone who was born in 1990 you're truly gifted ! - Love all the CNC work ! - Great video man.
What could be more beautiful than someone who is so skilful with his hands and who has the intelligence to make them make such pieces that one looks at like a painting by Picasso. Congratulations.
Your cooling system does not appear to be pressurized if it is... the coolant will boil at 212 degrees. If you are able to find a small standard radiator cap, all you have to do is add an overflow tank to that. In cooling -phase the vacuum in the system will keep the motor always full without air bubbles.
The stuff that u do is incredible I wish I had the tools that u have u do really great work
Hi from jim in Australia. You're a mad man and a genius and I absolutely love it. The fact that you made your own 3-speed gearbox with reverse is mind-blowing and I cannot wait to see more of this project. Not to mention I can see that you're building this with off-the-shelf parts/slightly modified parts, you could make this something that followers could build at home. ❤
FINALLY!!! What your doing is art!! Please turbo or supercharge it next PLEASEEE
Twin turbo
Do they even make turbos for these little motors? I've seen them with blowers before though. Has to be hard to tune them just right too. Unfortunately, as awesome as these engines are, lack the power that a regular single cylinder nitro engine has by quite a bit. That said it does not take anything away from the impressiveness of this build. I wish I had even a fifth of the skill and creativity he has to make these builds.
I like rc cars. I'd love to get a gas powered one.
But you make what I wanna do seem so elementary. Seriously man such attention to detail and commitment to design. I love to see it.
this is another amazing creation & build. I look forward to seeing its use in the future.
Man the sound of that engine is musical notes!
I hope you realise how lucky you are to have the Intelligence you've got! to achieve the degrees you've got! And to have the opportunity to be you and to build remote control cars. You're a lucky man 💯❤️🇬🇧🇬🇧
Bro is a sick pro 🔥
This is amazing. I've been waiting for this and can't wait to see it on the road. I wonder what the gear box will do when you have pressure on the tires. Freakin awesome
Seriously DOPE. Puts my 1/8 LOSI 4.0 truggy to shame.
Hello! Thanks for watching and commenting 🎉 You have been selected for the ongoing GiveAway. Téxt me on telegram above to acknowledge 👆👆
looks so cool, cant wait to see when it works
what body are you going to put on it?
muscle car would be nice
I love how a v8, no matter the size, just sounds like a v8. Even this small... it still sounds amazing
Should make a different intake system for it, seems like just like the other engines the stock intake is more about looking the part then flowing much air
you sir got me addicted and you deserve a sub for QUALITY content
To me this is just an amazing piece. I just stumbled across this and said "Interesting how did he do that?" Would love to see this finished piece. May I ask what kind of CNC machine are you using?
It's really beautiful to see!
BUT,
it's WAY too complicated to squeeze everything together on that small frame.
which can work very nicely Serpent Viper 989 Nitro 1/8 RC car
or
1/8 Serpent Viper 988
BUT that is no longer a sport you would say.
regards
Rob
thank you for being such a reliable source of fun and learning!
what if you make a small ctv transmission for an rc car
I'd love to, but I need to figure out how to make some parts what belt should I use, etc.
It will just explode.
Tiny parts, way high rotational speeds and pressure.
There is a reason all successful RC cars have simple designs.
This thing is already way to complex and engineered wrong and will never work, or work well, or handle well, or be reliable.
@@riverpirate1022 When it comes to scale the amount of power is way more than the full sized version. Like the . 21 ci nitro engines that can have around 5 HP. Now scale that power up and you get almost impossible numbers. Like a 1/10 scale car going over 100mph. Now scale it up.
The fact this machine exists makes me grin ear to ear
For braking, why not installing a brake disc on the transmission after ther gearbox ? It will allow you to have a single brake for the four wheels easier to install
Cant wait for the finished product, keep up the good work
Random video. DUDE, that is soo awesome, the detail, the craftsmanship, OMG!
Hello! Thanks for watching and commenting 🎉 You have been selected for the ongoing GiveAway. Téxt me on telegram above to acknowledge 👆👆
I dig it dude. My boy loves watching your videos. Downright gets upset if I watch em without him.
That is so awesome, and a lot of thought and knowledge of the mechanics to execute it! Love it 😄
I'm speechless ! Extraordinary job, can't wait to see the finished car...
This is shit I would dream about when I was a kid never believing I would see a miniuture v8 like this in my days. The Model that was out in the early 2000s was unattainable at like 25k.
unlike anything I've ever seen before!! Great work of engineering at its best.
Mechanical engineering at its finest.. awesome job. 👍🏼
Hello! Thanks for watching and commenting 🎉 You have been selected for the ongoing GiveAway. Téxt me on telegram above to acknowledge 👆👆
A thing of beauty!!!! Craftmanship is top notch.....
This is masterpice, good work Johnny!
The engineering behind it with the CNC your on another level bro am an engineer that is soo jealous of your set up bro and your knowledge and skills, am hooked and good luck for the rest of the beast project am blown away lol 😁👍👊
This is the TOP of RadioControl!!!! Very very nice.
Your quality of workmanship is outstanding. Nice result👏
Couldn't get my eyes off the video even for a second. If I ever built this on my own I would go crazy with happiness
That´s one of the coolest builds i have ever seen in rc
I can not tell you how impressive this is. 👏👏👏
From some point, my brain wasn't even braining . You are a genius, bro 🙌 ❤ new sub
That sound so beutiful, its kind of build, wich you just sit at your backyard next to bbq at Sunday, and just have this engine on display and rev time to time, such a beautifully sounding masterpiece 👍👍
Amazing machine mate. I'd be super keen to see the finished running project!
Rc cars have come so Far! Great video mate!
I think you rock Johnny. I Learn something new every video it would be nice to see some of the things that didn't go as planned. As Im sure we would learn even more. Thank you !
Looks and sounds so good, you know what you do. best man, greetings
Hello! Thanks for watching and commenting 🎉 You have been selected for the ongoing GiveAway. Téxt me on telegram above to acknowledge 👆👆
AWSUM Dude! had no idea that this tech was even out there, with the small V-8 engines that is. A real master piece with the transfer case and all, a true work of art.
AWESOME! Can't wait to see it completed.
Wow,can't wait to see it on the road running 😊😊
Holy💩 this is truly amazing. Cannot wait to see this thing drive your craftsman ship is astounding. Great video and great work. Can’t wait to see more.👍🏼🤩❤️
Excellent video!! I already want to see it running on the track 🔥🔥
Rc is cool enough as it is, what you just did hear is amazing.
Something about watching someone build or fix stuff is just so satisfying...
Watching this video was absolute joy for my eyes ❤
As a watchmaker I appreciate your work.
amazing work !!!! love it !
Really great bud !!!
Hello! Thanks for watching and commenting 🎉 You have been selected for the ongoing GiveAway. Téxt me on telegram above to acknowledge 👆👆
Amazing workmanship, that little v8 is cool 😎👌
You are very lucky to have such a workplace where you can work with such machines!
Some bit of kit that is you’ve produced, fair play, wicked 👌😉
serious question, how much would u charge to build one, i wanna buy one, thanks
I have no idea about engineering, but this is fun to watch.
Well done sir, can't wait to see the next installment.
Dude, that manual trans is amazing. Work of art
This guy can make anything woow
Cant wait for the final product bro. Great workmanship and 3D printing. Plus those aluminium blocks. :O 😱