Eride Pro SS Upgrades for Under $500

In this video we go over the Essential upgrades needed for the Eride Pro SS. Although this bike is great out of the box there are certain things you can do to make it way better on a Budget!
Parts list:
Warp 9 3" Rise Handle Bars:
chargedcycleworks.com/product...
Warp 9 Transformer Direct Mount Stem:
chargedcycleworks.com/product...
Warp 9 Footpegs:
chargedcycleworks.com/product...
Tusk GroundWire Tires:
chargedcycleworks.com/product...
ODI Grips:
chargedcycleworks.com/product...
Thank you for support and viewership. It would go a long way if you Liked, Commented, and Subscribed!
Intro 0:00
Future Upgrade Path 0:34
Categories 1:00
Safety Sensor Removal 2:03
Brake Sensor Removal 5:03
Tilt Sensor Removal 6:13
Kickstand Sensor Removal 6:48
Cockpit Upgrades 7:40
Parts 8:04
Direct Mount Stem Installation 8:23
Proper Stem Spacing 10:09
Display Mount 11:06
Footpegs 12:15
Tusk Groundwire Tires 12:36
Chassis Performance 13:46
Future Video 14:25
Outro 14:41

[@ulfdevil6694]

The headset info is priceless. Didnt know how to fix it before this!

[@MoxyDave]

Good video. Couple tips: seal the unused connectors so they don't get water or debris inside them, and I found these little plugs from Amazon work great to fill the brake sensor holes: "MECCANIXITY Silicone Snap in Locking Hole Plugs Rubber Panel Seal Cover Flush Type Panel Round for Kitchen Rubber Bulkheads Waterproof Sealing Plugs 6mm/0.24 Inch Diameter Black,Pack of 20". I have a Talaria Sting but the brakes look similar.

[@scottm2398]

Lol a couple of tips, like you're the pro .. .you're an idiot

[@loco10075]

Bike looks rad guys. Got one last week and loving every second spent on it. As a newbie to all this just wondering if you guys can make an in depth video of maintenance to the bike ie: Brakes, Chain cleaning/Greasing, proper chain tension

[@chlorineclips]

Please please please make an Eride pro ss bike assembly tutorial. One that walks through the process of putting it together step by step. I would love that

[@ChargedCycleWorks]

Our video right before this shows how to unbox

[@chlorineclips]

​@@ChargedCycleWorks it doesn't show a step by step tutorial, it just skips to the bike being built. Please make an in-depth one

Try growing up and using your brain to assemble some easy sht bruh

[@mct8888]

I’m desperate to figure out if Surron LBX seat extenders work with eRide?

[@StayConnectedEV]

Did they come up with a solution?

[@TwinkieLORD-33]

I live in park city and would love to do this $500 budget build when I get my eride!

[@ChargedCycleWorks]

We would love to help! Come by the shop and we can get the parts for you!

[@fivefivesix-sevensixtwo4114]

Would it be a good idea to swap the 19 inch rear wheel for an 18 inch with a bigger tire? That rear tire looks too small/thin. I want one for riding trails only.

[@the_boonies]

Do you guys leave the sensor connector open after removing the sensors?
Something I did on my LBX was to pull the sensor wires out of the back of the connector half, then fill the cable openings with hot glue and click the connector back together. Keeps the H20 out 🤙🍻 Great, informative video gents 🤗😎

[@ChargedCycleWorks]

Not a bad idea at all! The connectors are usually okay to leave open however protection is always a great idea. We will typically put dielectric grease in the connection and heat shrink over it

[@the_boonies]

@ChargedCycleWorks I'm ex-offshore survey.....14yrs mixing electronics and salt water. Try it out on your next build, especially if you're discarding the actual sensors 🤙🍻

[@Shreddylife]

I am ordering a set of Warp9 bars, Direct mount stem and some Warp 9 pegs. My question is will the "Precision Headset Spacers for Surron Talaria" Fit the Eride Pro SS too? I am assuming they do because I don't see any other ones for sale on the site. Please lmk

[@ChargedCycleWorks]

Yes they do, we will clarify that on our website. Thank you for pointing that out

[@DUBZILLAco]

Can you guys drop link to the spacers used for the direct mount stem? I counted 5 total? Thanks in advance!

[@ChargedCycleWorks]

chargedcycleworks.com/products/precision-headset-spacers-for-surron-talaria?_pos=2&_psq=wolf+tooth&_ss=e&_v=1.0

[@Manlixer777]

still did not decided yet,,,,,Sting R vs E-Ride Pro SS...Any advise?Thanks

[@drdane4873]

Out of the box the E-Ride beats everything on the sting R

[@taylorkim9049]

Just got my e ride ss sold my surron for it and it was the best decision ever, no joke

[@tiziwind]

​@@taylorkim9049where did you buy?

[@pittdtc8580]

No need for a Warp 9 stem lock? Curious if I should purchase 1?

[@ChargedCycleWorks]

This bike comes with a pretty decent stem lock stock, I wouldn’t worry about the upgrade until it gets worn out

[@CHAMP12R]

Im building the best E Ride Pro 2 SS right now

[@ChargedCycleWorks]

We would love to see it!

[@CHAMP12R]

@@ChargedCycleWorks it should be ready in 3 weeks I’ll send over video and pics

[@markforeman8625]

Why not use a lanyard like an oset. Not very safe as in my humble opinion.

[@tiziwind]

I am between for this and ultrabee...I raced in a dirt bike and now I want something fun for ride with my little kids in my track in the backyard...any suggestion?

[@ChargedCycleWorks]

Both bikes are extremely fun and easy to ride. The Eride is like a playful mountain bike, the ultra bee is like a playful 125cc dirtbike. All depends truthfully on if you want a small or medium sized bike

[@KJ-bz3ol]

I'm pretty sure that battery weighs as much as dude, right? (Almost cardiac arrested on removal)

[@ChargedCycleWorks]

😂😂 batteries are definitely the heaviest part of electric bikes