These reports are great for us guys that can only get out a couple times a month, thanks Alan. We've been doing good on the bucks out of KL for a while, still waiting for a big mama that I can release. Hopefully I can shake your hand at the boat ramp at some point.
J and p bait the live bait source for the S.F bay reported on April 25th that they were having some mechanical issues but expected to have bait for sale within a few weeks. As for the halibut fishing the S.F bay is insane with boats.
Thank you for the report. Careful with wrapping the top of your boat so tight with bungees or anything for that matter. If you crease it, that's where cracks will form.
I started a consulting business and I'm offering two options. #1 Electronics consulting 2hr session on water. #2 Electronics and fishing technics 6hr session
Alan , with as much as you are on the water do you flush your engines after each trip ? I run a jet and a kicker in the delta is it a good idea to flush them after each trip?
No I don't flush my motor fishing the delta. You probably would have to get out past Honker or Martinez to be in any salt water. If you look at your prop wash and it's foamy then running back to Brannon Island would flush it out.
Your suntan Is Back. ☀️ My boat has electrical issues in the harness. I can’t figure it out. That’s why I haven’t been talking much about fishing. I’m going to try one more time to fix her. If I can’t….to the shop. I try my lucky fish N from the bank soon.. I saw Denise her Mommma She landed a Big Fish🐠 Lucky 🍀 Lady Right?
Piranhamax should be fine in the delta and river. If you fishing in middle lake for kokanee or trout in over hundred feet even if the fish are 20 ft down the unit is to weak in power. If your seeing short dashs then your transducer needs to be tilted up from the back. Turn the sensitivity all way up to 20 as high as it will go and go try again
Alan would your new duckworth still work for throwing lures for striper in the Delta?I was thinking about getting into a bigger boat of that type so I could do Sturgeon and Halibut in the Bay but my main deal is chasing stripers trolling/casting in the delta…Thoughts?
I have a 22ft wellcraft walkaround with a volvo penta dual prop and a 9.9 honda kicker I was wondering if you knew of any way to hook the kicker to my outdrive any input would be appreciated is there any way to do it been looking everywhere no luck hoping maybe you knew something about it
I've been with Lowrance for over forty years know them inside n out. I also can do most brands but some times takes me a bit to find the controls. So basic set ups no problem but to really fine tune a garmin not at this time.
![หมานแต่ผัวเขา - แสตมป์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/m0g1TSBJPgo/mqdefault.jpg)
Thanks for the report.
They definitely keep me motivated.
I will get out on the water soon.
When I do I’ll look forward to checking out that boat.
These reports are great for us guys that can only get out a couple times a month, thanks Alan. We've been doing good on the bucks out of KL for a while, still waiting for a big mama that I can release. Hopefully I can shake your hand at the boat ramp at some point.
I'm always somewhere in the delta and lakes 5 to 6 times a week. If I'm there stop and say hi!
I love this guy. I wanna be like Alan when I grow up.
I'm 70yrs old so you got a long wait lol
Tanks for your Reports and for posting your videos have a great day out there 🙏🙏🙏🙏🙏🙏🐟🐟🐟🎣🎣🎣🎣🎣🎣👍👍👍👍👍
thanks
Thanks Alan. Good report. Nice boat.
Thanks
J and p bait the live bait source for the S.F bay reported on April 25th that they were having some mechanical issues but expected to have bait for sale within a few weeks. As for the halibut fishing the S.F bay is insane with boats.
Yes the guys who know the bay are doing pretty good on the halibuts
Thanks Alan for the reports
your welcome thanks for watching
I want to experience catching so many fish that I can say "my arms are hurting" 🤣
Good job guiding Alan!
I just consulted him on his electronics and it was loaded with archs and we had two on most of the time
Thanks Alan I am going to the lake for Kokanee this weekend to work the settings you showed me Saturday. 🎣
Good luck!
Thank you for the report. Careful with wrapping the top of your boat so tight with bungees or anything for that matter. If you crease it, that's where cracks will form.
OK thanks
Thanks Alan!
What would we do without you.
thanks glad to help
2:34 Thanks for the updates Alan nice Duckworth will you be guiding?
I started a consulting business and I'm offering two options. #1 Electronics consulting 2hr session on water. #2 Electronics and fishing technics 6hr session
Good report 👍, what lures did you use for trolling the delta and how deep u trolling that day, thanks
Yozuri 5" shallow running in chart with white trick worm in 7 to 10 feet at 3.3 to 4.5mph
Great report - which spoons are you using?
Bladerunner 1 3/4 n 2 oz spoon in dark green and anything with chartruese
Thanks for the report alan. What size speedy shiners would you use at Folsom? Thank you.
The small ones work the best in red/gold
Alan , with as much as you are on the water do you flush your engines after each trip ? I run a jet and a kicker in the delta is it a good idea to flush them after each trip?
No I don't flush my motor fishing the delta. You probably would have to get out past Honker or Martinez to be in any salt water. If you look at your prop wash and it's foamy then running back to Brannon Island would flush it out.
Your suntan Is Back. ☀️
My boat has electrical issues in the harness.
I can’t figure it out.
That’s why I haven’t been
talking much about fishing.
I’m going to try one more time to fix her.
If I can’t….to the shop.
I try my lucky fish N from the bank soon..
I saw Denise her Mommma She landed a Big Fish🐠 Lucky 🍀 Lady Right?
Usually if not the plug it be easier to change harness
Hey Alan,
I think I heard you say spoons ,
If that is correct, were you using the flutter spoons?
No I'm using bladerunner 1 3/4oz spoon and 2 oz spoon anything with chartruse works good. I also use dark green spoon that I pour
Is throwing pliers for stripers the same in spring,targeting same areas they are in fall?
I'm missing something throwing pliers? Don't watch my own report
@@AlanFong lol lures I don’t know how the hell pliers got in there
A wise man once said,
"You should never throw pliers kid. Never".
Throw pliers?
😊🤗👋
I have yet to ever see arches on my humminbird piranhamax 4 DI can’t figure out how to get it to work properly
Piranhamax should be fine in the delta and river. If you fishing in middle lake for kokanee or trout in over hundred feet even if the fish are 20 ft down the unit is to weak in power. If your seeing short dashs then your transducer needs to be tilted up from the back. Turn the sensitivity all way up to 20 as high as it will go and go try again
Hey Alan, I'm new to the area and want to catch some crappie. Any advice or area that I should go to?
Right now I would say Berryessa or Clear Lake would be the top two choices.Their shallow and some on beds.
Alan would your new duckworth still work for throwing lures for striper in the Delta?I was thinking about getting into a bigger boat of that type so I could do Sturgeon and Halibut in the Bay but my main deal is chasing stripers trolling/casting in the delta…Thoughts?
Yes you can but the wind blows it around. I've been spooning in it a lot lately with no problem. So I know I can cast swimbaits too.
We are fishing on sardines at garcia bend, what side is the best side of the bend, East or West side
West side and I always fish the shallow sand bar sides of the river
I have a 22ft wellcraft walkaround with a volvo penta dual prop and a 9.9 honda kicker I was wondering if you knew of any way to hook the kicker to my outdrive any input would be appreciated is there any way to do it been looking everywhere no luck hoping maybe you knew something about it
No I don't think so.
👍
thanks
Are you familiar with garmin fir trip booking?
I've been with Lowrance for over forty years know them inside n out. I also can do most brands but some times takes me a bit to find the controls. So basic set ups no problem but to really fine tune a garmin not at this time.
Alan I need the help with my electronics and want to learn the art of spoon or jig fishing. Would you provide your contact information.
my email is fishfong@aol.com you can contact me there