You get the same minimalist suspension only effect as these 4 lines if you delete your custom file then run the game. It creates one with just these lines in it. Along with code to stop the wheel thrashing about when stationary. Edited to fix spelling
The problem I had with this 'fix' was the massive vibration when the car is stationary. It wasn't happening all the time, but when it did, the force nearly took my hands off. I went back to the Default+ FFB, which is fine.
I went into my simucube software and just turned down pretty much evrything but a few base sliders. Then in game i set a small amount of low foce boost, like at 2, and turned the fx and dampning on a bit, and it actually feels pretty solid.. Im going to try this tonight and see how it compares
Wow.. with the V1.6 update and the new FFB settings the game feels exactly like what I was looking for, I'm on a thrustmaster TX and I drive the porsche GT3 R 100% a much better driving experience.
Default costom setup works great for me with 1.6. ffb is a personal matter of feeling.compared to the other sims my ffb Moza5 feels best for me. it takes a while to test, but now it works great in all categories and cars. In the moza software you can also save a separate ffb profile for each category and each car. 1.6 update was great for me. ams2 now my favorit Sim.
I have a moza r5 and my wheel gets incredibnly hot after just 10 mins, like cant even touch the base. I have my wheel speed set at 180 and hands on protection off
@@hp2823 No problem here with Moza5 , its very warm, but not realy hot.I can leave my hand on it at any time .... ffb setting 100%. in game at 90% (its really strong)
Been using the custom files for 2 years! Prefer the Danielkart V6000 Extreme 3 for 1.6..... Would never agree with anything Gamer Muscle says the guys a joke! Lots of discussion has been had on the FFB you mention on the official forums and it's not all positives especially when you see the amount of work all the other FFB modders are doing
@kevin8798 agreed. He only seems to negatively talk about ANYTHING. I understand being a critical but generally a critic gives feedback - not just shitting on stuff endlessly.
I didn't say I agree with what everything anyone says. That's the beauty of opinion. I really like this ffb file tho, while it's basic, it gives me the turn in, car and tyre feel I've been looking for, I've tried many others with limited success but it's personal taste of course. 👍
For a long time the AMS2 faithful have been saying more difficult doesn’t mean more realistic, I would extend that to more complex doesn’t mean better feedback. Most of the custom files are doing way too much in my opinion, the rack force feels much more clean and feels instantly intuitive.
I agree the guy is a joke. His video on best FFB settings for AC is ridiculous. But this change to custom ffb file, actually makes a huge difference. I still feel everything. With my R12 it feels great. I have gain in Ams2 set to 55 everything else on 0. Moza Pithouse takes care of the rest.
For me it has been a great change in the FFB and physics. I'm using Simucube 2 Pro. The only problem I have is that when the car is stopped, the vibrations are unbearable and the whole cockpit vibrates. Do you know how I can correct this so that the car doesn't vibrate when stopped?
Add some damping in ffb settings I run 25 to 30, I also add 6 low force boost and 0 fx I also have simucube pro 2.. SennaMental is my username if you want to try this with my simucube profile
@@redneck595 Ok, thank you very much, I'm going to try it right now. I'll write to you here with my feelings and if the vibration problem when stopped has been solved.
@@redneck595 Thank you very much for your advice, thanks to your recommendations the vibration when stopped, which was very very annoying, has been corrected. I have added more force because it was too soft. I leave you my settings in case you want to try them. Put the sennamental profile in simucube true drive, it has been corrected for me and I am quite happy with the result, I set the game settings to custom, force 60, low forces at 6, effects 0, cushioning 20, springs 30
@@scorps0326I did, the weight of the wheel is a bit more pronounced there, tyres less noticeable but overall more like Rfactor (although not as good as RF2).
@@scorps0326 Yeah, very odd. Why would it create one if you haven't set up a custom setup? In any case, I did move my AMS2 folder from one SSD to another, to go on a new pc I built, so maybe I missed some files, as you have suggested. Great video by the way!
well not quite but it gets it closer, it is the pure ffb signal.. AC has the ffb from all 4 tires, the suspension and the steering rac.. as i understand this is the actual physics related ffb, every thing else is added effects not directly related to the physics engine
🔝This change has made AM2 really playable for me. Now it's great fun to drive the curves. I use the Fanatec podium and before with standard or + it was really a joke. Thanks for this tip!
I've been using that custom FFB since I saw his video a few days ago and have been enjoying it.
Tried last hour and really helped! Could now catch oversteer, which I always found almost impossible,
the Formula-Inter at Oulton Park.
Totally agree! It's much better.
You get the same minimalist suspension only effect as these 4 lines if you delete your custom file then run the game. It creates one with just these lines in it. Along with code to stop the wheel thrashing about when stationary. Edited to fix spelling
If you turn up the individual car ffb in car setup to 125% you really feel it
can you show us your Moza Pit House settings also, since that also affects the experience, right?
What is the difference between that shorter Rack_Force and the other one that is going around that has many more lines of code?
I'm unsure of others that are going around. I do know there are many, my original file had a massive amount of code!
The problem I had with this 'fix' was the massive vibration when the car is stationary. It wasn't happening all the time, but when it did, the force nearly took my hands off. I went back to the Default+ FFB, which is fine.
You can add in some damper which may solve this the vibration. 😉
Default plus is ok too.👍
Which option to choose in AMS2 ffb-settings with this changes in txt-file? "Custom" or "Standard"?
I beleive "custom" 👍
Do you know why when I apply throttle, it feels laggy and not responsive? Driving me nuts!
Sensitivity pedal settings
That's a specific AMS2 thing (compared to other sims) that has been always been (to me too) an issue.
last time I had something driving me nuts I found a steering wheel in my pants 😂
Maybe your nuts need a tune up? :)
I noticed the lag the other day. I hadn't noticed it before.
I went into my simucube software and just turned down pretty much evrything but a few base sliders. Then in game i set a small amount of low foce boost, like at 2, and turned the fx and dampning on a bit, and it actually feels pretty solid.. Im going to try this tonight and see how it compares
Wow.. with the V1.6 update and the new FFB settings the game feels exactly like what I was looking for, I'm on a thrustmaster TX and I drive the porsche GT3 R 100% a much better driving experience.
Default costom setup works great for me with 1.6. ffb is a personal matter of feeling.compared to the other sims my ffb Moza5 feels best for me. it takes a while to test, but now it works great in all categories and cars. In the moza software you can also save a separate ffb profile for each category and each car. 1.6 update was great for me. ams2 now my favorit Sim.
I have a moza r5 and my wheel gets incredibnly hot after just 10 mins, like cant even touch the base. I have my wheel speed set at 180 and hands on protection off
@@hp2823 No problem here with Moza5 , its very warm, but not realy hot.I can leave my hand on it at any time .... ffb setting 100%. in game at 90% (its really strong)
Can either of you share your pit house settings as I'm struggling to dial mine in for a year now lol...
Been using the custom files for 2 years! Prefer the Danielkart V6000 Extreme 3 for 1.6..... Would never agree with anything Gamer Muscle says the guys a joke! Lots of discussion has been had on the FFB you mention on the official forums and it's not all positives especially when you see the amount of work all the other FFB modders are doing
Totally agree about GamerMuscle. He is only out for 'haters' so people are commenting. He is always negative. Bleh
@kevin8798 agreed. He only seems to negatively talk about ANYTHING. I understand being a critical but generally a critic gives feedback - not just shitting on stuff endlessly.
I didn't say I agree with what everything anyone says. That's the beauty of opinion. I really like this ffb file tho, while it's basic, it gives me the turn in, car and tyre feel I've been looking for, I've tried many others with limited success but it's personal taste of course. 👍
For a long time the AMS2 faithful have been saying more difficult doesn’t mean more realistic, I would extend that to more complex doesn’t mean better feedback. Most of the custom files are doing way too much in my opinion, the rack force feels much more clean and feels instantly intuitive.
I agree the guy is a joke. His video on best FFB settings for AC is ridiculous. But this change to custom ffb file, actually makes a huge difference. I still feel everything. With my R12 it feels great. I have gain in Ams2 set to 55 everything else on 0. Moza Pithouse takes care of the rest.
For me it has been a great change in the FFB and physics. I'm using Simucube 2 Pro. The only problem I have is that when the car is stopped, the vibrations are unbearable and the whole cockpit vibrates. Do you know how I can correct this so that the car doesn't vibrate when stopped?
Add some damping in ffb settings I run 25 to 30, I also add 6 low force boost and 0 fx I also have simucube pro 2.. SennaMental is my username if you want to try this with my simucube profile
Great feedback. Thanks!
@@redneck595 Ok, thank you very much, I'm going to try it right now. I'll write to you here with my feelings and if the vibration problem when stopped has been solved.
@@tus_hobbys_son_los_mios hello, have you solved it?
@@redneck595 Thank you very much for your advice, thanks to your recommendations the vibration when stopped, which was very very annoying, has been corrected. I have added more force because it was too soft. I leave you my settings in case you want to try them.
Put the sennamental profile in simucube true drive, it has been corrected for me and I am quite happy with the result,
I set the game settings to custom, force 60, low forces at 6, effects 0, cushioning 20, springs 30
im on a tspc racer what settings should i use damper etc ?
I am unsure as I haven't used the Tspc sorry.
Did you also try the latest Rfuktor? How do you think that compares to this one?
Sorry I haven't tried it as yet.
@@scorps0326I did, the weight of the wheel is a bit more pronounced there, tyres less noticeable but overall more like Rfactor (although not as good as RF2).
@@ExcelbrainsInteresting! Thanks for the feedback
for the fanatec csl dd pro it work better with the stock settings from Reiza. Less FF with your minimalistic settings, sorry
That's ok mate, whatever suits you best 🤝
I don't even have that FFB file in my AMS2 list for some reason!
That's odd! I'm pretty sure the game creates one automatically if you do not have one.
Maybe looking in the wrong folder?
@@scorps0326 Yeah, very odd. Why would it create one if you haven't set up a custom setup? In any case, I did move my AMS2 folder from one SSD to another, to go on a new pc I built, so maybe I missed some files, as you have suggested. Great video by the way!
No need to backup file as game recreates it if you delete it!
If you want to keep your original settings its a good idea 😉
There are better FFB files, this one makes AMS feel just like ffb in AC. No wonder GamerMuscle liked it...
LOLi though something similar when I saw GM publisha video about it. I was using the Rack force before 1.6, now i don't think I need it anymore.
well not quite but it gets it closer, it is the pure ffb signal.. AC has the ffb from all 4 tires, the suspension and the steering rac.. as i understand this is the actual physics related ffb, every thing else is added effects not directly related to the physics engine
Facts!
Thanks a lot, it's very nice with this.
I'm glad you like it
🔝This change has made AM2 really playable for me. Now it's great fun to drive the curves. I use the Fanatec podium and before with standard or + it was really a joke.
Thanks for this tip!
Great to hear!
Care to share your podium settings?
@DEFBOY35 meine Setting in game:
Gain : 60 (bei 55 % in wheel )
Damping : 15%
Fx : 15 %
Pen: 0%
Low Down: 0 %
There is a better one than this but i can't post the link as youtube won't let me its over on overtake GG you'll have to search for it.
Could you give us a clue? Author or name of file please
@@andyw0340 yeah 1 sec let me see
@@andyw0340 I think its down under KuKu Maddog i think thats correct let me know how you get on.
@@apocalypticweasel9078
Thanks 👍