Woodshop Dust Collection Install - Oneida Dust Gorilla Pro
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- Thank you Oneida for making this possible! Check out the links down below to find out more and to get a quote for your shop!
Shop Plan Ductwork Design Service:
bit.ly/3LNT8nG
Daniel Knapp, Technical Sales Rep:
dknapp@oneida-air.com (315) 476-5151 x109
5HP Dust Gorilla® Pro Dust Collector:
bit.ly/3nps9VS
Quick-Clamp Duct Fittings:
bit.ly/3AKgapd
What is SMART Boost Technology:
bit.ly/3VrhqqB
The Advantage of HEPA Filtration:
bit.ly/44jPbOF
For more details, check out my website - www.3x3custom.com/tutorials/d...
____
AMAZON (affiliate) LINKS
Plug I used:
amzn.to/3nnCaDj
____
My Amazon Store - amzn.to/2uRpplb
____
CHAPTERS
0:00 Intro
0:52 Unboxing
2:21 Stand Assembly
3:15 Dust Collector Assembly
10:24 Duct Work Install
18:10 Let's Turn It On!
19:14 Let's See How It Works!
20:40 Smart Boost Technology
22:35 Tool Connections
26:48 Outro
_____
My Recording Equipment
Camera:
amzn.to/3r3HAC0
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :) - แนวปฏิบัติและการใช้ชีวิต
You have some great sponsors plus a huge resource for help. Thank you all who assisted Tamar.
That is one huge improvement. I’m so impressed and inspired by how far you have come. From starting off with your Dewalt contractor saw to all that you have now. Amazing!!! You and a few others inspired me to start my own channel and I just wanted to say thank you. Keep up the wonderful videos. I always look forward to the next one.
Congratulations on your new dust collection system. I look forward to seeing it in use and how you modify it in the future.
Excellent to see you back, 1 yr old daughter and I love your videos. That is an amazing system - may your lungs forevermore be dust free!
I am so envious of your new shop and all the improvements you are adding. Looking forward to seeing you get back to building!
I’ll get in the shop now! Ha
I just finished watching this video and I'm just sitting here with my mouth open. It's a great new space. The new woodworking equipment is a huge upgrade. When you add what you just did to the equation it is an exponential leap. I'm a step or two behind you in the evolutionary process and I am so acutely interested in what you're doing. Keep the videos coming.
One of my woodturning friends bought this unit a few years ago……….. and just loved it. A great product
This is awesome. I would love an Oneida system at some point! Hopefully when I’m able to build a larger shop…
Your work is so amazing and your videos are phenomenal. I love that you go through so much of the process with us and explain what’s going on, and include the how and why!
You’ve pretty quickly become my favorite woodworking creator!
What a wonderful system! All the years of hard work have really paid off for you. I can't think of someone more deserving! Glad you had time off but even more glad you're back.
☺️☺️
I love that you blank out the faces of your family. Kudos for that. Nice to know that your fingers and nose will not be freezing anymore in your nice new warm shop. Congratulations. Keep up the great work. Love and Respect from North London UK.
Love the bit on your router table. Wild how much of a difference this new system made! I really liked their full package for planning and implementing your ducting!
It’s been a dream to work in here!
Tamar, you did an awesome job installing that system! And yes, I could hear the increase in rpm when more than one gate is open. So happy for you in this new shop. It's beautiful. Congrats!
I smile every time I walk in here now ☺️
Oh my goodness, I’ve just learned so much practical stuff. I really need to invest in a major dust collection upgrade and you are my inspiration. Great video!
Congrats, looks like a nice system. Hope it serves you well and keeps your shop clean and your (and your family's) lungs protected. Congrats on the jointer too, the new shop is really coming together nicely!
It’s getting better and better every day!
I get so excited every time I see a new 3x3 video! They're few and far between these days (completely understandable) but still so good.
I love watching my favorite channels grow! Cool to see how you progressed from a jobsite saw in an uninsulated garage to some top of the line equipment in a tricked out comfy workshop. So excited for you Tamar, can't wait to see what future projects come out of this shop.
Being able to work comfortably in the winter has changed my life. Excited for everything I’ll build in here!
Awesome dust collection system. Also nice to see you have a jointer, a tool you come to appreciate as much as your table saw and planer.
Just used it on my newest project and it was the best most seamless glueup I have ever had. Ha.
Hi Tamar, great looking system, and your work shop has some great tools the saw stop table looks the business looking forward to what you turn out. Really enjoyed watching you make your daughters bed. Love from South Australia 🇦🇺 🎉
So great to see you back! Super cool dust collection set up. That was scary to see all the fine dust particles on the wall and glad you're properly protected now.
Yeah, those bag filters are really awful. If only I could describe the “clean” smell my shop has now after turning the system on. It really is night and day.
Glad to see the upgrade! I have the smaller system but I did use Izzy’s connectors and the red light from Oneida. They both work great! Hope to see more content.
So far it’s working out great!
Beautiful setup! Thanks for taking the time to share your considerations for each step. Every shop has it's unique quirks and tool demands. You really shed light on the ease of creating drops with minimal flex tube. Great table saw setup getting it out of the way even though its in the middle of the shop!
Glad it was helpful!
The connection clamps are so easy to use and to modify. A new jointer is awesome congratulations. Like a kid with a new toy you will use it every day I know that I did. It looks so great. Very well done and now it's time to work. Thank you for sharing.👍♥️
🙌🙌
Glad to see the shop coming together.
Watch for build up at the bottom of the double 90 degree lift. Consider a cleanout T or convert to a sloped run. The latter will give more suction a the end of the run.
Awesome. It is so exciting to get proper dust collection plumbed in the shop. A few months ago my dad helped me hang 4 & 6 inch pipe for the shop. Seeing it all and walking around without tripping over dust hoses makes me so happy.
Right?! I didn’t realize how much floor space I had in that corner
Amazing shop. What a journey, Yours is best example of “Think big, start small”
To Festools, Sawstop, Oneida from where you started with hobby tools.
Thank you for amazing videos. By the way your router jig is the most used tool in my hobby shop.
Tamar, so glad to see you post a new video - we have missed you! Good dust collection will make a considerable difference in how comfortable it is to work in your shop. Looks like what you have now will make things much safer for you and your family. Looking forward to new videos of projects you build in this shop ... just hope they will not be as few and far between as in the past few months as I really enjoy your videos. Have fun in this new shop and make some really cool stuff!
I just finished up cooking dinner after milling some lumber and my kids will not be getting any extra fiber tonight like they have in the past 😂😂 really, it is a game changer, it feels so clean to work in there now.
I hope I don’t take another break for as long as I just did, that was totally not intentional!
You're back!!🎉 been too long, I'm in my lunch break so looking forward to watching this tonight 😊 hope you and the family are all good 🇬🇧
I’ve been busy with the family! All good stuff… sometimes I just need to take a break and focus on them ☺️
So nice to see all your hard work fulfilling your shop to where it is today.
☺️☺️
Wow. I recently started following you and have so far made your router jig and your small crosscut sled, (which are my first ever woodworking projects) and it is amazing to see how far you have come.
Congrats on all of the success. You deserve it. You make great content. I really appreciate how you break things down and your outtakes are hilarious.
Haha so glad you enjoy!
You did a great job putting that system together. Slow & easily figuring out where the Drops needed to go. Your lungs will appreciate the cleaner air.
This is going to be a huge improvement to your shop.
Best wishes for you in all your future builds.
It’s already been so amazing
Congratulations on you new dust collection system and your new shop looks amazing glad to see you back to making videos and congrats on your collaborations with Jonathan Katz Moses on your new tools.can’t wait to see what you do next
Thanks! Busy working on a new project!
i'm sure you had a "blast" setting this all up. it's exciting getting pallets full of boxes. And it's a strenuous task doing all the research making decisions and how much of what to buy. but it's all for your health and worth every penny.
Your new shop is getting better and better and I feel envious of your high ceilings. Also great to see you not freezing while elegantly explaining your setup 😊
Every time I walk in there in just a sweatshirt I take a big sigh of relief. Ha.
Yes I was thinking the same….looking great
@@3x3CustomTamaryou’ve earned it!!
Big congrats Mrs Tamar 😻 that Oneida system is a total Beast ! your workshop has upgraded by about 1000% ! and the bloopers are still
just as funny as always 😹😸 I was wondering about putting the system outside of the shop too / but you answered that in the video . 🙏❤😸😺
🙌🙌
It's been great watching you get your new shop set up. So nice watching great makers up their game!
So glad you enjoy!
I miss you!!!!! Am impressed, motivated and feel encouraged by your videos....
I appreciate the time and energy you put into y your videos for us.
☺️☺️☺️
Wow Tamar, Very very nice. Great layout. The shop is looking amazing. You have worked so hard and you so deserve to have this awesome dust collection system. What a great video showing us the process. Enjoy working in your amazing shop.
So glad you enjoyed watching the process. It’s so nice to work in a clean environment
Felt completely nostalgic watching this! Glad to see the shop is coming along! Looking forward to the inspiration you've always given me, seems it's been forever! Worth the wait, though!
It has been a long time… just got a little busy with life stuff!
You've made an excellent video explaining your reasoning and showing how to add dust collection. I've seen a number of tedious videos on this subject - yours is engaging as well as informative. Thank you.
So glad you liked it!
I am looking into setting up a system in my new shop with approximately the same # of tools. I know you went all in with Oneida and they most likely gave the best system for endorsement and completely understand this. But for those of us that do not have that luxury, can you provide a ballpark of cost and any suggestions where you think savings can occur. This is not a negative comment because of your association with Oneida, I just want to be informed before I take the plunge. Thank you for this insightful video.
Great content Tamar! Congrats on the new system. This was a great video illustration for the build process and design considerations of a dust collector system.
Glad you liked it!
I recently upgraded to an Oneida Supercell. Many options, many less expensive but none better. Plus I have clean shop OCD and using the 2.5” hose to sweep floors and tools is absolutely amazing! Well done on the install.
The supercell looks amazing too
It's nice to hear from you again. I'm looking forward to you're next furniture building project. 😊
Going into the shop now to get started!
It is incredible to see how far you have come. You have worked hard for your success, enjoy it.
☺️☺️
Happy to see another video from you Tamar! Your shop is looking awesome!
Just built a new house with 9’ ceilings and this style dust collection seems more than perfect for the plan. Great video!
Yes! Thank you!
You did a great job! This is the 3rd video I've watched on installing ductwork today, and you made it look almost easy. I saw something when you were seeing how it worked on the individual tools. When you used the jointer, the bottom of your shirt looked pretty close to the blade guard. It's just something to be aware of! Anyway great job! Your shop is looking awesome!
Good to see you back! That collector and ducting looks amazing! Great job
Thanks!
Congratulations Tamar! What a system you now have and what a job assembling and installing. I’m anxious to hear how you like it. I am now rethinking my system.
I actually enjoyed milling yesterday. Ha
Really well done ! I think you have dust collection nailed down no doubt. Thanks for the time you took to show us how it all went together, a really well done video Tamar.... I'm excited for you ! Cheers from Utah... ;-)
So happy to finally have this all set up!
Nice to see you back! And a new jointer to boot. Great!
Now, more project builds please. Can't wait to see something new.
Btw, I am working on a wooden pedalboard design, and I am revisiting some of your vids to get some ideas with joinery.
Keep it up, Tamar, stay safe and God bless
Posting a new one tomorrow!
Waaaah.... pleasant surprise!! Nice to see you back!! Always enjoy your videos. Askwali um tu'mii'laih'tah (thank you for your work; Hopi)
🙌🙌
I went with an Oneida system, maybe 20 years ago... One of the best ever investments I ever made in my shop. They have new and improved just about everything. Mine is a 3 hp system, and my old shop was 24 by 36. My new shop is maybe 2400 feet, but the DC sits in the middle. The ground wire is a new thing. There has always been talk about static build up and sparking with the potential of starting fires. Never heard of it happening, but it doesn't hurt to be prepared. The sensor in the collection bin is new. I could have used it many times. I had found my filter totally full of 'stuff'.... Not sure what they say about cleaning the filter. When mine filled up, I ended up taking it out to the back yard, and then hosed off the inside. The old filters were paper, and it didn't seem to change anything, other than keep the dust down in the neighborhood. The quick clamp seals for pipe junctions is a great idea, as are the wire loop things for suspending the duct work. I do wish I had a 12 foot ceiling in my shop. Mostly so I could move full sheets of plywood around more easily. Hard to pivot a full sheet when you have a 9 foot ceiling, but my shop was designed so it would be converted into a house when my birth certificate expires.... The remote control things are new as well, I had one called 'the Lone Ranger'. It was set on an FM frequency so you could even turn it on from outside, and not have to point it at the receiver. I did make a point to have 2 of them. Mostly because I have several wood lathes, and lost one in the shavings. The one in the lathe room is on a hook. The other in the flat work room floats around since half the time I forget to put on my apron.... Any comments about removing dust build up in the filter? Some just tap the outside of the filter. I have seen some that had a 'beater' on the inside to knock the dust loose. One other feature I had considered would be a 'slow' speed so you could filter out all the floating dust in the shop rather than using an air scrubber thing....
Wonderful system to collect the particles from the workshop... The most grateful will be your lungs and the walls of your workshop... congratulations on this achievement Tamar
Thanks!
wow...! most excellent, tamar...! i can see now why it's been a while since your last video; you've been busy with the dust collection setup... you've come a long way since your first videos... your videos are very professional and well edited to flow smoothly and, thankfully, you do not let annoying youtube marketing mid-roll (dumb) ads interrupt the flow of information and/or demonstration you are presenting... i, as a viewer, appreciate that companies like oneida (and others) sponsor you so you can create content without the aforementioned annoying youtube ads and create videos that are entertaining and helpful...
i look forward to more of your great informative videos...! (i especially love the videos on creating jigs for projects) thank you, thank you, thank you...!!! 😁🤗
So glad you appreciate that, I hate mid rolls too…
Thank you for the video I’m in the process of getting back into woodworking and so I’m doing a lot of research. Your video gave me lots of useful information
Finally someone on TH-cam installing the BEST DC system and not pushing Clearvue POS!
I have had mine for over ten years and it is the best! I hope you love it as much as I do.
Grinning from ear to ear every time I turn it on 🙌
That setup is a far cry from the unheated garage & portable contractor saw 🤣 (and yet, you still turned out great pieces!). Congrats on getting everything situated. Looking forward to the new builds!
I can’t believe I worked in the winter all those years 😂
Tamar it’s sooo good to see you uploading again. I cannot wait to see what you are working on next
As a commercial electrician I run into Gripple systems for suspending light fixtures. They're great! Congratulations on the new dust collection system, y'all did excellent installing it!
Thanks!
I love seeing you get rewarded for your hard work. You deserve it.
Like from the book, just passed the course on this but nothing to add, you explained it well and all correct.
It's been way too long between videos. So glad to see you making more, and thank you for the shop tour! I'm almost ready to install my own dust extraction (another 60 or so days, I think), and then I'll be able to start actually using some of the ideas you give.
Sorry it was so long! Life got away fro me. Ha.
@@3x3CustomTamar Life finds a way. I'm just glad it didn't take you away forever. Yours are some of the videos I really look for.
Great to see you back, love the new system -- like a kid in a candy shop :) I see the new Festool miter saw too! I got a Domino several months back and was just as excited! Just got your router jig but haven't had a chance to use it yet.
The domino is so fun
Oneida has sure progressed since I bought my Oneida system back in 1994. It was Oneida first system. They where only really making cyclone separaters and oversized felt bag filters at the time. Which was attached to an off the shelf dust collector. I have been upgrading it recently with iVAC PRO Blast Gates and newer duct work.
Yeah… they are really top of the line! So awesome
Your channel is awesome and I love how you adapt to any situation even if you are not as familiar with something. My dream is to do carpentry and woodworking as a side business and have a home shop like yours. Great job!
☺️☺️☺️
Awesome system and nice team work. I like the ceiling hooks and smart by assembling as much as possible before putting it in the air. 👍
It was really so easy to install by myself. Minus the motor assembly. Ha.
I bought the 7.5hp regular Oneida cyclone and made an extension arm for a neighbor's car motor hoist to lift the fan-motor onto the stand. That fan and motor must have been 400 lbs. I was using my 170 lbs to counterweight to lift and as soon as I moved forward to center the fan on the cyclone cone the hoist would start to tip. Finally collected enough bricks from the yard to lift the
cyclone into position. Without the hoist it might have taken 3 men to do that work. Oneida has been a good purchase for keeping my woodworking shop clean.
Love these folks, Great Company!!! Video is very timely and extraordinarily helpful!!!
So glad it was helpful!
Very nice! In my previous house I had a dust collector for my table saw, and also a floor sweeper. It had a 20' hose that would collapse down to about 4' or maybe a litte less. It was definitely better than having 20' of pipe coiled up on the floor.
Great setup Tamar. Impressive how quick the router cabinet cleaned out. And the pencil sticking out of your hair 😄. I hope the new system serves you well. Look forward to future projects. 🍻
Haha. I have no idea where that pencil came from. I wasn’t even writing anything down 😂😂😂
100% going back and watching this video was brilliant worth the watch on the missed content!
Glad you enjoyed it!
Hi Tamar, Thanks for sharing your dust collection upgrade. I have a new dust collector also that I'm anxious to get installed. It's not as elaborate as your bust still a huge upgrade from the shop vac. Keep up the great work.
Good luck installing it!
Good luck on new shop!!! I learned a lot from your videos!
Awesome to hear!
Thanks for the new video. Setting up proper dust collection in a small shop seems to be quite mysterious. (Or, at least, I found it to be so.) Videos like yours are super useful! Interestingly, the Dust Gorilla Pro with the Quick-Clamp ducts is my current plan. Either that, or the High Vacuum system Oneida sells. After suffering with inadequate dust collection for so long, I would rather go overboard and have a system with more capacity than I might need. Thanks again!
So glad it was helpful!
i bought the same unit for my three car garage shop and its a beast...you will love it, is sure do!
Already loving it so much! It’s been such a pleasure to work in here!
Just like a lil child with a new toy... Gotta love the big smile. Congrats on the new system!
😂😂 thanks!
Great system, Congrats!!! It really gets your shop at the next level!
really enjoyed the video and am thinking about doing the same in my own shop.
Just one thing to be mindful about the vacuum extension and the floor sweep, you have to be really carefull about NOT vacuuming any metal (like a screw or a nut) in this system. It can create a spark that can light the wood chips in your bin on fire and burn your house down. This is why these are prohibited in professional shops out here in Québec.
Keeping a good old shop vac is the solution for the floor sweeping.
You are seriously the coolest person in the world . I have no idea what you are talking about 😂 I am in awe .I can’t handle it
😂😂😂
Looks so awesome! Love that swiffer hack for cleaning the walls. Never thought about that.
Excellent work, Tamar, as always.
I have the identical system in my shop, with the exception that I have added iVac automated blast gates throughout. They are absolutely game-changing. No more thinking about what's open and what's closed; you simply turn on a machine, and the appropriate gate opens while all the rest remain closed. Turn on a second machine, and its gate opens, while the one that was previously running remains open. Brilliant!
Compared to the cost of the 5-hp cyclone and Nordfab-style ducting, automating the blast gates throughout is easily affordable.
Can't wait to see your video on their addition to your new system.
Yeah. I was looking at those as well. I need to add some outlets. Was waiting this this was set up to figure all that out
@3x3CustomTamar
Let me just say that it will take your dust collector to such another level that you will think it's in the stratosphere. I wouldn't be surprised at all if they wouldn't send you a handful of these for being such a popular TH-cam channel.
Congrats, glad your business is growing, been watching you from your beginning, love your success!
Thanks! I feel so happy when I walk into my space every day
Glad to see the shop is coming around! Looks great!
Thanks!
Absolutely love this! So happy for you, Tamar!
Thank you so much!!
Nice to see you back with a new video. I missed you, but I imagined it was due to the new shop.
Just busy with life stuff. All good, the 3 kids keep me busy ☺️
very beautiful installation, perfect for a carpentry workshop and also for the health of the occupants
Great setup, Tamar~! I'm currently using a homemade "dust-zilla" setup where I converted my Harbor Freight DC into a 2-stage with an Oneida Dust Deputy. So far, the HF DC with the PVC ducting is working pretty good, but the rig you have is what I'd like to upgrade to.....one day. This video was great motivation to move in that direction. Thanks for sharing it~!
Hopefully you’ll get there one day!
Your new shop assistant did a good job. You are now at Pro level!!
💪💪
What an awesome system! You do an excellent job of explaining the process.
Glad you liked it!
I’ve been waiting for a new video!! Glad you posted one!!
☺️
You’re such an inspiration! Nothing holds you back ♥️
💪💪💪
Congratulations on the new machine!!!!
Thanks!
Wow !!!!!! Hats off to you. That was a lot of work. Well done.
You are a total genius!! I congratulate your venture based on the intelligence of the proposal and the strength and determination to carry it out. Big hug
☺️
Great job on this. I just recently redid the dc in my shop and landed on the same plug n play for my drum sander/jointer. Love the flexibility of it. I bet you are getting excited to see the finish line (essentially) on the build out.
Yeah! I don’t think it will every be truly finished though. It’s always a work in progress. Ha
@@3x3CustomTamar Haha, you speak the truth. The finish line in a shop is more of a functional iteration isn't it. :)
Great video and excellent installation!
Nordfab duct systems are great - and expensive - but worth it if one can afford it! I installed mine a few months ago and once I understood the layout needed, it went together fast!
I have a ClearVue Cyclone 1450, and it is quite awesome with 6 machines and a floor sweep being collected via blast gates.
Something I noticed about the 5 horse 3-phase motor was the heat gain. The motor when operating averaged about 135 degrees of heat dissipation (based on thermal gun readings) at the top of the motor housing. During the summer months this will increase the temperature in my shop significantly and likely will require added fans to move the heated air around a bit.
I noticed the heat already. We shall see how that goes
that is just one heck of an upgrade. II am sure you'll love having all that power to hand when you need it.
One thing though about the curves in the pipework. It still is true that you lose efficiency in turns, even though it can still pull the static dust and chips from your router table. If you had less bends, it'd do it better, and/or at lower power used / work easier. Nothing wrong with having a few (nobody's shop is "straight" after all) but minimising the 90's and using 45's can certainly get you an efficiency benefit. Ultimately the fine dust is the thing you want to eliminate anyhow, not big heavy chips, and that's about moving a greater volume of air and the fact you've got large main trunks going to the locations you have is great !
Nice to see you back looking forward to seeing more of your builds
Glad to be back!
Nice work Tamara, looks like you considered everything. The workshop's really coming along.
It’s so nice to work in here now
Thanks for your video, It really is a wonderful system. Didn't expect it to suck the dust from under your router so well. And your helpful friend has beautiful heart-shaped eyes!
Haha yup! I was pleasantly surprised
Hi 3x3 Custom , what a great improvement to your work shop, I like the smart hand control start up, Stay safe, I look forward to seeing your next project, and clean shop, PHIL FROM THE DARK SIDE OF THE MOULIN FRANCE,