instructions for tightening he centerlock wheels: wheels need to be off the ground (someone needs to brake) tighten to 650nm loosen again 90 degrees then tighten again 650nm afterwards check the in the middle lock needs to be fully out or you risk damaging the centerlocks greetings from a Porsche mechanic from Belgium :)
So nice to see you guys about to start a new chapter in your journey by using the new shop. You’re going to be able to even more amazing work. What a nice smell that had to be, ewww
I like how you guys have come full circle. I remember when you complained about spending $160 for a part. Now $16,000 for 2 seats not a big deal. Let's see that retro- camaro get completed. Hope all of your family is safe.
Guys using carpet tape from the Home Depot when you remove shattered glass helps a lot . This is a clear plastic for masking when painting in a home double up on it and use gloves it will minimize the little shards from falling all over.
I recommend you look at a carbon roof for the car. It's gonna be way easier to replace than the glass roof, and if you're going with the GT look it'll fit right too.
Im glad to see you guys using your real names. Be proud of your name!!!! Ive been watching you guys for about 3 or 4 years. So inspiring to see what you guys have done.
@@Clasq_GOD you don’t know what you are talking about bro. My family really enjoy the house build videos. My 2 year old loves them! When I put this on my 2 year old skeeter threw his iPad across the room.
Wow. Been here since the humble beginnings. Amazing to see your first build in the new shop. You guys worked hard to get here. Just proves that in America, anything is possible.
It’s so interesting to watch you guys learn about Porsches. When I saw the plastic Cover in the frunk come off I was like “they’re getting close“ then finally you found the center lock nut 🙌. I’m sure you guys will be Porsche experts by the time you’re done 👍👍
@@markbennett6658 No bar to take the center locks off. Tire sealant and pump or tow truck to Porsche dealer. The down side of center locks is you got to go to Porsche or Indy service center.
In 1984, ayrton senna raced with the stars of motorsport and won. This race was a mercedes event, they used the 190E. This year, on Senna's birthday, FuelTech decided to pay tribute, building one, but with some current modifications and such. They are stopped because there is no one to paint the car and make some structural changes. You are good at this. I think your work is really cool, very neat and familiar, which is pretty much the same path that fuel tech takes on a daily basis. Sorry my english.
Agreed, he’s come a long way from his “not wanting to be on camera days” to be a full time cast member of the Goonzquad! He’s also the full time trailer man… I love how he’s the one pulling everything with his trailer, like you never see his truck without the trailer on it. You’d have to say that pops trucks has had the highest return on investment of all of their builds/repairs. He DRIVES that truck the way it’s meant to be driven - it could be called a “trailer princess” now, but not in the way that term typically applies. 🤣
First build in the new shop, that is so friggin epic! Looks like its going to be huge job to resurrect that wreck! Perfect way to kick things off at the new location!
A question, are you planning on pulling the spark plugs out and turning the motor over by hand in case there’s oil in the cylinders? Since it was upside down I’d be careful about hydro locking and bending a rod, though I’m not 100% sure that motor will do that or let the fluids in a cylinder back out into the oil pan, though changing the oil before trying to start it and seeing if there’s anything mixed in it would be the very least I would do. Good luck with the build!
Great video! I have owned three Porsches, a 1967 912, a 1973 911, and a 1984 928S4. Liked each one. One suggestion, get the Porsche shop manual for this car. Without it you may find yourselves struggling.This build will be epic. My son grows all sorts of peppers in order to make his own hot sauces. I got him some of your Dang sauce. When he tasted the sauce he said it was the absolute best he had every tasted. Keep up the great work.
To get to the engine, you will have to drop the rear subframe. Regarding the centrelock wheels, you will need a long breaker bar to loosen and tighten, check the torque rating, I don't know off the top of my head, but it is a ridiculous high torque rating.
Guys it’s so good to see you back at what your good at 👍🏼 and man what a cracking build to start in the new shop 😊 awesome can’t wait till the next episode 🙏🏻
You should replace that glass roof with a carbon roof! (Useless) glass roof -> high center of gravity (and very expensive to replace). Carbon roof would be waaaay lighter, cheaper and just perfect for that Porsche Turbo!
I'm a little nervous about this one guys. My buddy Adam and I were talking about you this morning (both big fans) I've NEVER doubted yall ever but this one has zero going for it. Excited to watch this one and see where we go from here!
Kent Nilsson , and you don’t think they will have his phone number now? They already learned on that build what to buy, how to dismantle, how to square it up, how to weld, how to put on glass and interior.
@@chrisrobles2012 the trackhawk didn't have this much damage. I'm not saying they can't do it. I'm saying I'm nervous for them on this one and excited to see them tackle this project
Great video, surprised you guys didn’t wear protective goggles when cleaning up the glass. Hopefully you will remove the rest of the windshield in your next video. Congrats on the new shop, it’s coming along and can’t wait to see what’s next.
Obviously, you figured it out, but in the future couldn’t you back the trailer into a lift and lift the car off? Also, happy to see the frame machine used for its intended purpose - tacos!
My father is financing his 2019 911 Carrera T in the same color. He has bucket seats and the rear seats were deleted when he built this car. The bucket seats have a lever on the bottom in the front so you have to lift that lever up to move the seats. I don't know how both of you are going to do it but this channel will be the first one to put bucket seats that has rear seats in the back unless you'd decide to remove them.
My guess this Porsche that I have been waiting for a long time seems unsalvageable or it’s good to use mechanical parts for a better one so you can really enjoy the beauty of a Porsche !
Hi guys, greetings from Argentina. A few thoughts: 1) I´m so glad that such an epic car as a Porsche will be the very first major project in your new workshop. (BTW: congrats on having finally electrical power on it). 2) As I said (and a lot of viewers as well) SAFETY COMES FIRST!!! PLEASE don´t wait until something badly happens to either of you before wearing safety goggles and gloves, specially when removing shattered glass. The next time you go to The Home Depot, buy some of those items an place them handy and start using them before anyone has to regret it. A serious eye damage can throw you back days if not even weeks, so BE SMART and don´t let enthusiasm overcome yourselves. Also, a mouth/nose mask would have spear you that horrible smell. I don´t want to be a pain-in-the-butt, but all these safety items took years of research to develop them and sometimes on the cost of somebodies life, so as hand-workers as your self, at least honor their history. 3) My prediction to the nearest future is a major growth of your channel since a lot of interesting stuff are going on: house build, barn/man-cave upgrade, new workshop emprovement and obviously the new car. I can hardly wait to see what that amazing frame machine can do. As always, cheers from NE Patagonia, Argentina. See you on Sunday!
If you haven't done anything for the smell you can put a can or bag of coffee beans in there and it will take out the smell in no time. I have used this trick many times!!! Love yall's videos and excited about the new build!!
I'd definitely keep this color, but otherwise I'd keep it low key, like the Ruf 911s in the past: sleek, narrow body, better aero, a wolf in sheep's clothing. I guess you would not be the only ones doing a GT2/3 look alike.
The philosophy of the rich and the poor is this, the rich invest their money and spend what's left while the poor spend their money and invest what's Left.
Reading about people grabbing multi-figures monthly as income in investment even in this crazy days in the market,any pointers on how to make substantial progress in earnings? would be appreciated...
So nice to see you working in the new shop on a Porsche. Generally to get the motor out, just put on the lift and drop down with all the sub-frame, super easy
Yeah !!! Could be a money pit !!! If they are talking about spending $16 thousand for 2 front seats !!! Thats more then they spent to rebuild most of their cars !!!!
you are not accounting for the coop monies being paid by the frame machine manufacturer. This build was specifically bought to pay back the obligation in exchange for the frame machine. The genius backside deals would make everyone's head explode! My congratulations to Eleazar and Simeon for negotiating these kinds of deals. Even though I know full well that several upcoming episodes are going to be full on product ads for the frame machine, I can't fault anything you are doing. Well done Gentlemen Well done.
My name is Leo bells and I've been watching your show for quite a while I said in the first message I really enjoy watching y'all's message y'all's videos and I would like the seat belts in your Porsche the same color blue as the car is with the blue lining in the black seat belts or blue seat belts and black lining but I think the black belts in the blue lining down the sides will be better I do believe but my name is Leo Bells I've been watching your show for quite a while for a really long time now so keep up making videos and I really do enjoy them keep making new videos I hope you all get the new shop done real soon can't wait to see y'all start actually working in there for good cuz I really enjoy watching you.
Hi from the UK, so pleased to see Porsche 911 (my favourite car and a Dodge Charger a close 2nd !) on the channel. Looking forward to the next episode 😎😎😎👍👍👍
Yeah those carbon bucketseats are manual and surprisingly comfortable, but as comfortable as the existing ones not on long journey, if you’re going for the GT look then they are a must
Afraid it’s not a take of the rear bumper trick, some Porsches you have to take out the rear seats an lift off the interior just to get to the engine even to change a belt! But can’t wait to see this build! 😍
Pull the fuse for the fuel pump and pull the spark plugs and rotate the engine by hand and then the starter to get all fluids out of the cylinders. Drain all the oil and refill with fresh oil and replace the spark plugs. Replace any damaged piping for the oil and cooling systems. Then start the motor and check it's health. I am sure it in find condition as it was running when wrecked.
Having a bachelor party this weekend. Everyone has to take a shot whenever y’all say *dude* or *super* Entire party gonn be lit asf, *super* LIT *doooooooooooooooooood*
The Adaptive Sports Seats Plus are more comfy for sure especially with 18 way adjustment; the Buckets in carbon fiber are non-adjustable (adjustable one way manually technically) and decently comfy, but less enjoyable for driving around everyday.
I love your videos and love feeling your good vibes. It is nice to see you guys are doing well and juggling all these projects. Love the Porsche and can't wait to see the progress.
Your garage still needs to have the polyeurathane coating applied to the bare concrete floor and the frame machine needs to be bolted to the floor and the upright posts installed.
Just got my dang sauce off Amazon prime. Been waiting for it to be back in stock. Recieved it today an Dang that is some really good sauce!!!. That'll be good on everything!
I meant on the seat belts the belts blew in black trim that look pretty cool with that car with the blue seat belts in the black trim down the side is what I meant for the seat belts and I can't wait for y'all start working in your new building and I really enjoy watching y'all's videos so keep up the good work and also please drink plenty of water go really do need it in the seat
instructions for tightening he centerlock wheels:
wheels need to be off the ground (someone needs to brake)
tighten to 650nm
loosen again 90 degrees then tighten again 650nm
afterwards check the in the middle lock needs to be fully out or you risk damaging the centerlocks
greetings from a Porsche mechanic from Belgium :)
Let’s hope they actually read their comments
👆Give this man some upvotes!
@@Kaosnia They Never read comments.
@@timglass6041 they do.. but some two months down the road when damages have been done hehehehe
@@timglass6041 They did. But sometimes. They might be read, But never respond
7:50 Congratulations!!! Shops first foul smell. Salute to many more to come guys! Bless up!
So nice to see you guys about to start a new chapter in your journey by using the new shop. You’re going to be able to even more amazing work. What a nice smell that had to be, ewww
That thing will never be finished.
@@Adlerwacht you must be new here
Paid $54,000
@@Kevin_leonardo_ or maybe he’s just right
@@nathanthomson777 another one , welcome to the chanel
I like how you guys have come full circle. I remember when you complained about spending $160 for a part. Now $16,000 for 2 seats not a big deal. Let's see that retro- camaro get completed. Hope all of your family is safe.
$1600, because no one in their right fucking mind would spend 16k on seats. if they would actually, better just buy a new car lmao
fella I would spend 1600$ on RS3 carbon buckets all day.
This is easily the build im most excited for. I've been wanting a Porsche for years. I think you guys are ready.
I love Pops!!! So humble and genuine!!!
I love Pops in the videos!! He is funny, a hard worker, and you know he is so proud of his boys!
And he beats the piss out of that Ram, no respect for the boy's work at all.
Guys using carpet tape from the Home Depot when you remove shattered glass helps a lot . This is a clear plastic for masking when painting in a home double up on it and use gloves it will minimize the little shards from falling all over.
You can also hang up the carpet outside and hit it with a stick or something.
Make sure you drain the engine. Pull plugs etc. You guys know the drill. 🥸👍
This is not true at all lol
Seam tape
Had the same idea when I needed to remove broken glass block windows, it worked great to contain the shards💪
I recommend you look at a carbon roof for the car. It's gonna be way easier to replace than the glass roof, and if you're going with the GT look it'll fit right too.
or turn it in to a convertible
Pops needs a raise for cleaning out that trunk. Enjoying the channel. Tks for sharing.
Im glad to see you guys using your real names. Be proud of your name!!!! Ive been watching you guys for about 3 or 4 years. So inspiring to see what you guys have done.
For years, I thought their parents had named them both "dude".
Man i Love you guys here from Ghana....im gonna start mine and name my most epic build after you guys mehn.....
Much love boys....❤🇬🇭
House building videos are good, but car rebuilding is what we all want the most, greetings from Poland 🇵🇱🇵🇱🇵🇱
My family and I are here for the house building videos
@@Henleyrocks They have workers building the current house unlike the other house on the mountain. so nothing much to learn from this house build.
no! house building videos are much more fun!!
@@Clasq_GOD you don’t know what you are talking about bro. My family really enjoy the house build videos. My 2 year old loves them! When I put this on my 2 year old skeeter threw his iPad across the room.
The sound is so much better in the new workshop :) Send them seats to Sue from Fast and Loud she can do incredible things with that leather.
Lol she’s way out in Texas
Wow. Been here since the humble beginnings. Amazing to see your first build in the new shop. You guys worked hard to get here. Just proves that in America, anything is possible.
The most wholesome thing in your videos is seeing you guys with your dad and the rest of the family! ❤️
👆👆👆🔝🔝🔝
Congratulations you have been shortlisted winner for today prize.
Inbox to claim.
I'm really glad to hear no one was seriously hurt in that accident. Also good to see you boiz end up with a sick porsche! Can't wait for this series!
Brought for $54 k coparts
@@Russeljfinch that's so cheap!!
It’s so interesting to watch you guys learn about Porsches. When I saw the plastic Cover in the frunk come off I was like “they’re getting close“ then finally you found the center lock nut 🙌. I’m sure you guys will be Porsche experts by the time you’re done 👍👍
Their contact at Porsche didn’t tell them that..
I’m guessing there’s some kind of a bar to turn that nut located somewhere in the car as well?
Pops u speak what language u want u the boss !!!
@@markbennett6658 No bar to take the center locks off. Tire sealant and pump or tow truck to Porsche dealer. The down side of center locks is you got to go to Porsche or Indy service center.
@@maxmartz4665 if that’s the case it’s surprising the actual adapter for the centre locks is in the car even if it’s a little bit hidden?
I've been waiting for this build for years now. Finally!
Oh wow you won 🥇 😂
Watching you guys all the way from Zimbabwe, Africa. Getting down to projects is a whole lot different this end but you're inspiring!
In 1984, ayrton senna raced with the stars of motorsport and won. This race was a mercedes event, they used the 190E.
This year, on Senna's birthday, FuelTech decided to pay tribute, building one, but with some current modifications and such.
They are stopped because there is no one to paint the car and make some structural changes. You are good at this. I think your work is really cool, very neat and familiar, which is pretty much the same path that fuel tech takes on a daily basis. Sorry my english.
Wow, seeing them start a new build in this shop has me feeling some type of way 😍
Pops laughing 😂 at his boys... you are weak 🥨 good job Pops show them how is done!
Weak
@@randomhobbies5796 True, thx edited.
@@LosZonga no problem
I think this will be my favorite car you guys have rebuilt
Thats if they dont push it to the side once they get into it and find out how hard it is straighten out !!!
It is so impressive how much work you get done and keep things as clean as possible. Must feel great to be finally able to use your new workshop.
Miracle whip dang sauce relish awesome hotdog spread
Super awesome seeing you guys working in that nice big shop!
We are all excited for you guys and can’t wait to see the outcome.
Love how your dad is just happy to be there you could see how proud he is of his boys
Yes you can working with he son's
Agreed, he’s come a long way from his “not wanting to be on camera days” to be a full time cast member of the Goonzquad! He’s also the full time trailer man… I love how he’s the one pulling everything with his trailer, like you never see his truck without the trailer on it. You’d have to say that pops trucks has had the highest return on investment of all of their builds/repairs. He DRIVES that truck the way it’s meant to be driven - it could be called a “trailer princess” now, but not in the way that term typically applies. 🤣
Ok lets take your time and slow down and Get it done Right. No rush The boys are back in Town...Melli doing a great Job....
First build in the new shop, that is so friggin epic! Looks like its going to be huge job to resurrect that wreck! Perfect way to kick things off at the new location!
I am soooo fired up over this new build! One of my favorite cars being rebuilt by one of my favorite TH-cam family! 🔥
A question, are you planning on pulling the spark plugs out and turning the motor over by hand in case there’s oil in the cylinders? Since it was upside down I’d be careful about hydro locking and bending a rod, though I’m not 100% sure that motor will do that or let the fluids in a cylinder back out into the oil pan, though changing the oil before trying to start it and seeing if there’s anything mixed in it would be the very least I would do. Good luck with the build!
That is a very good recommendation, instead of just trying to fire it up without checking anything. Make sure the transmission has fluid in it too!
It's a flat-six, so the cylinders point out sideways, so that might not be too big of an issue
They are going to turn the key they don’t understand things like the rest of us just for a stupid picture could or will cost them a fortune
@@jeffliptak9784 If they are thinking about spending $16000.00 for 2 seats apparently they arent to worried about wasting money !!!!
I was thinking the same thing!!
Glad to see we're back to fixing cars.
Love Porsches. Been working for them for 7 months now! Good luck you guys can’t wait to follow this journey!!!
Great video! I have owned three Porsches, a 1967 912, a 1973 911, and a 1984 928S4. Liked each one. One suggestion, get the Porsche shop manual for this car. Without it you may find yourselves struggling.This build will be epic.
My son grows all sorts of peppers in order to make his own hot sauces. I got him some of your Dang sauce. When he tasted the sauce he said it was the absolute best he had every tasted. Keep up the great work.
To get to the engine, you will have to drop the rear subframe. Regarding the centrelock wheels, you will need a long breaker bar to loosen and tighten, check the torque rating, I don't know off the top of my head, but it is a ridiculous high torque rating.
About tree-fiddy..
Guys it’s so good to see you back at what your good at 👍🏼 and man what a cracking build to start in the new shop 😊 awesome can’t wait till the next episode 🙏🏻
You should replace that glass roof with a carbon roof! (Useless) glass roof -> high center of gravity (and very expensive to replace). Carbon roof would be waaaay lighter, cheaper and just perfect for that Porsche Turbo!
congratulations on the success of Goonzquad, I'm WEDER from Quirinópolis Goias Brasil, I'm your fan, I watch and like all your videos.
Best video in a while, I watch every episode and will continue to. Im not a Porsche guy but this car is pretty cool, I love the color.
I'm a little nervous about this one guys. My buddy Adam and I were talking about you this morning (both big fans) I've NEVER doubted yall ever but this one has zero going for it. Excited to watch this one and see where we go from here!
I was thinking you may need a whole body shell for this one?
Not much different than the maroon suv they did they had rolled.
@@chrisrobles2012 But that was vTuned garage who fixed that body and he knows what he do.
Kent Nilsson , and you don’t think they will have his phone number now? They already learned on that build what to buy, how to dismantle, how to square it up, how to weld, how to put on glass and interior.
@@chrisrobles2012 the trackhawk didn't have this much damage. I'm not saying they can't do it. I'm saying I'm nervous for them on this one and excited to see them tackle this project
Hey guys you guys need to get some of those plastic rain barrels to conserve and save water and comes in handy when you want to wash your cars
You have been picked among 👆👆
our fan for today presentation.*
Or it's Billy's (Elezar's) bath night?
Great video, surprised you guys didn’t wear protective goggles when cleaning up the glass. Hopefully you will remove the rest of the windshield in your next video.
Congrats on the new shop, it’s coming along and can’t wait to see what’s next.
👆👆👆🔝🔝🔝
Congratulations you have been shortlisted winner for today prize.
Inbox to claim.
The Dinoco Blue Porsche! Almost ready for cameo in a Pixar movie!
Just got my first bottle of dang sauce in the mail today! DANGGG that sauce it good! Love the videos! Love the sauce! Keep it up guys!!
NIKO PASSED HIS CONTRACTORS EXAM - he’d be hanging your kitchen cabinets by now !
You have been picked among 👆👆
our fan for today presentation
Obviously, you figured it out, but in the future couldn’t you back the trailer into a lift and lift the car off? Also, happy to see the frame machine used for its intended purpose - tacos!
Must be some difficulty times for your old men love how he stays true to his roots 🇺🇦
Greeting from the Netherlands 🇳🇱
My father is financing his 2019 911 Carrera T in the same color. He has bucket seats and the rear seats were deleted when he built this car. The bucket seats have a lever on the bottom in the front so you have to lift that lever up to move the seats. I don't know how both of you are going to do it but this channel will be the first one to put bucket seats that has rear seats in the back unless you'd decide to remove them.
Congrats on first job in new garage. Good luck. You are hard working people, wery rare today
👆👆👆🔝🔝🔝
Congratulations you have been shortlisted winner for today prize.
Inbox to claim.
First rebuild series in the new garage! Let's go!
Don’t reply to the comment below it’s a fake account and it’s a scam. I’ve tried contacting the real goonzquad
Can't wait to see this beauty in a perfect look 😍
You have been picked among 👆👆
our fan for today presentation•.
My guess this Porsche that I have been waiting for a long time seems unsalvageable or it’s good to use mechanical parts for a better one so you can really enjoy the beauty of a Porsche !
Congratulations claim your lucky prize message ☝️ now
Who’s watching out for the safety of the puppy you all got me hooked on caring for the well being of that gorgeous little cute furry puppy
A must watch channel
I'm supper excited for this one boys. on the 991 generation, the 18 way seats are the most comfortable and thickly padded.
Hi guys, greetings from Argentina.
A few thoughts:
1) I´m so glad that such an epic car as a Porsche will be the very first major project in your new workshop. (BTW: congrats on having finally electrical power on it).
2) As I said (and a lot of viewers as well) SAFETY COMES FIRST!!! PLEASE don´t wait until something badly happens to either of you before wearing safety goggles and gloves, specially when removing shattered glass. The next time you go to The Home Depot, buy some of those items an place them handy and start using them before anyone has to regret it. A serious eye damage can throw you back days if not even weeks, so BE SMART and don´t let enthusiasm overcome yourselves. Also, a mouth/nose mask would have spear you that horrible smell.
I don´t want to be a pain-in-the-butt, but all these safety items took years of research to develop them and sometimes on the cost of somebodies life, so as hand-workers as your self, at least
honor their history.
3) My prediction to the nearest future is a major growth of your channel since a lot of interesting stuff are going on: house build, barn/man-cave upgrade, new workshop emprovement and obviously the new car. I can hardly wait to see what that amazing frame machine can do.
As always, cheers from NE Patagonia, Argentina. See you on Sunday!
You guys should buy a roll back since you get a lot of cars that don't roll on there own it would be a great investment
You have been picked among 👆👆
our fan for today presentation.
Youre Mom & Dad are the absolute star of your show! .....LOL!!! LOVE, LOVE, LOVE them!!!!!!
If you haven't done anything for the smell you can put a can or bag of coffee beans in there and it will take out the smell in no time. I have used this trick many times!!! Love yall's videos and excited about the new build!!
👆👆👆🔝🔝🔝
Congratulations you have been shortlisted winner for today prize
Inbox to claim
I'd definitely keep this color, but otherwise I'd keep it low key, like the Ruf 911s in the past: sleek, narrow body, better aero, a wolf in sheep's clothing. I guess you would not be the only ones doing a GT2/3 look alike.
they are young. so most likely will go for the flashier GT look..
Yea, I guess I'm older than Pops at 62. Yet two of my cars do actually have rear spoilers, if relatively modest ;-)
Beautiful car guy's I love the paint color this will be a beautiful car when done.
The philosophy of the rich and the poor is this, the rich invest their money and spend what's left while the poor spend their money and invest what's Left.
Can't agree more
Reading about people grabbing multi-figures monthly as income in investment even in this crazy days in the market,any pointers on how to make substantial progress in earnings? would be appreciated...
So nice to see you working in the new shop on a Porsche. Generally to get the motor out, just put on the lift and drop down with all the sub-frame, super easy
👆👆👆🔝🔝🔝
Congratulations you have been shortlisted winner for today prize.
Inbox to claim
This is epic you guy's are starting a new build òn a Porsche in your new shop. This series is going ro great series.
This the first time one of the builds I’m skeptical. Even with ad revenue this doesn’t look very profitable or worth it
You may be right because they're going to spend tens of thousands on parts and the engine may not even run or run properly afterwards.
@@_-0_x_-_p_0-_ the repairs are already paid for?
Yeah !!! Could be a money pit !!! If they are talking about spending $16 thousand for 2 front seats !!! Thats more then they spent to rebuild most of their cars !!!!
you are not accounting for the coop monies being paid by the frame machine manufacturer. This build was specifically bought to pay back the obligation in exchange for the frame machine. The genius backside deals would make everyone's head explode! My congratulations to Eleazar and Simeon for negotiating these kinds of deals. Even though I know full well that several upcoming episodes are going to be full on product ads for the frame machine, I can't fault anything you are doing. Well done Gentlemen Well done.
@@ahlacartsgolfcarts 🤯🤯
You guys should check the oil level before starting it. Since the car was rolled over.
My name is Leo bells and I've been watching your show for quite a while I said in the first message I really enjoy watching y'all's message y'all's videos and I would like the seat belts in your Porsche the same color blue as the car is with the blue lining in the black seat belts or blue seat belts and black lining but I think the black belts in the blue lining down the sides will be better I do believe but my name is Leo Bells I've been watching your show for quite a while for a really long time now so keep up making videos and I really do enjoy them keep making new videos I hope you all get the new shop done real soon can't wait to see y'all start actually working in there for good cuz I really enjoy watching you.
The dang sauce is legit. It’s not some random sauce. It’s fire! 🔥
So cool working in your new shop. Lots of good lighting.
Been watching you guys got for years, funny to see you rebuilding a vehicle from the neighborhood
I love all the other content but definitely feels good seeing y’all jump back into the old school building content!
Hi from the UK, so pleased to see Porsche 911 (my favourite car and a Dodge Charger a close 2nd !) on the channel. Looking forward to the next episode 😎😎😎👍👍👍
Please can I have some Dang sauce !🤞🤞🤞
So the original accident happened in Brooklyn NYC. Wow
Can’t wait to see you revive it ❤️
Cool guys back to the real meat of your channel a build and a Porsche we'll definitely stay tuned
The slap at 0:13 with the song had me like ... NICE
I'm a long time subscriber of you guys. I'm excited with the new garage
Yeah those carbon bucketseats are manual and surprisingly comfortable, but as comfortable as the existing ones not on long journey, if you’re going for the GT look then they are a must
Afraid it’s not a take of the rear bumper trick, some Porsches you have to take out the rear seats an lift off the interior just to get to the engine even to change a belt! But can’t wait to see this build! 😍
Awesome seeing you guys in the shop. If you can, add a lot more lights in the shop
I love when pops took a break frm working for some old fashion fun 👍🏾👍🏾👍🏾🤣
The GT 3 Carbon seats are non-reclinable bucket seats. They hold you in tight but from my experience they can only move forward and backward
BK baby my home…The car scene there is getting wild. I was there the night but left before this happened…Good to see a NY story in the car industry
Pull the fuse for the fuel pump and pull the spark plugs and rotate the engine by hand and then the starter to get all fluids out of the cylinders. Drain all the oil and refill with fresh oil and replace the spark plugs. Replace any damaged piping for the oil and cooling systems. Then start the motor and check it's health. I am sure it in find condition as it was running when wrecked.
Awesome video ,pops is always the man on the spot,glad to see the first build in the new shop under way,alway some good eating pour on the dang sauce
You should bring it to Euro District in Jeffersonville IN on October 8th!! It's an amazing European car show and I'm sure people would love to see it!
Contact me for your gift you are a lucky winner shortlisted 🏆☝️☝️
New shop looks fantastic gentlemen..congrats...on to the next one..so excited...in Kevin harts voice 😁😁
I love when y’all get the back story on em!
Having a bachelor party this weekend. Everyone has to take a shot whenever y’all say *dude* or *super*
Entire party gonn be lit asf, *super* LIT *doooooooooooooooooood*
nothing can make goozquad boy's more happy then nice color totally wrecked sports car😁👍
Love that car and that color! You boys have some work ahead! Porsche is a luxury super car.
The Adaptive Sports Seats Plus are more comfy for sure especially with 18 way adjustment; the Buckets in carbon fiber are non-adjustable (adjustable one way manually technically) and decently comfy, but less enjoyable for driving around everyday.
Best channel ever I just can't get enough. You guy's should organize a meet and greet some day would be awesome
I love your videos and love feeling your good vibes. It is nice to see you guys are doing well and juggling all these projects. Love the Porsche and can't wait to see the progress.
Don’t be telling Pops what language he needs to speak in! Pops does what he WANTS! Star of the show!
Pops is the gem of this channel.
Your garage still needs to have the polyeurathane coating applied to the bare concrete floor and the frame machine needs to be bolted to the floor and the upright posts installed.
Just got my dang sauce off Amazon prime. Been waiting for it to be back in stock. Recieved it today an Dang that is some really good sauce!!!. That'll be good on everything!
I meant on the seat belts the belts blew in black trim that look pretty cool with that car with the blue seat belts in the black trim down the side is what I meant for the seat belts and I can't wait for y'all start working in your new building and I really enjoy watching y'all's videos so keep up the good work and also please drink plenty of water go really do need it in the seat
Best project yet!! Can’t wait to see the progress! 👍🏼
I think you’ll find you have WAY more Porsche fans than Lamborghini/Ferrari…Those cars are PLAYED!