@@BeetTheRush I would enjoy video taping that! Especially if we were doing a manifold cook at the same time. If you rev the motor too high, I can shout "You're burning the vegetables!!"
@@BeetTheRush Double clutching the down shift is, apparently, the only trick. Go for it, Beet'! And Paul can make the first "learn to drive a model A" video.
Thought for a second that you were really going to show-off and back the car on the trailer! Athena looks like a great project car with lots of potential!
Love the videos, been watching since I bought my grandfathers 31' 5 window coupe. I just gained possession of my Grandfathers 31 Model A that had been sitting since 1992 (I was 7yrs old at the time) . I recently Got it running all I had to do was buy a new battery ,cleaned and gapped the points and fresh gas. It started right up and idled without even choking it. Of course I checked the fluids before starting.. I was so excited on how well it ran I hopped in it and rode around my yard and country road. All the memories I had riding in it Came rushing in when I drove the car out of the garage and up my driveway. Thanks for all the videos! It has helped tremendously getting to know my 31'.
Tina was smiling at the end there, but at first sight I thought maybe she, ahhhh... didnt like the color? We love your videos up here in Calgary, Paul. Keep up the great work. I'm gonna go to your store site now to send some restoration support your way.
@@ModelA I thought so. I know she's a good sport and she's all in from past videos (e.g., saw her video changing oil, I think it was). In fact, saaaaaay... She could be a real role model for my Michelle. Yep, I'm going back to book mark that video.!
@@ModelA please do get that into a video, as Michelle tells me, since my last comment, she won't do oil. "Man's work!" I just can't believe that sexist remark in this day and age. Seriously, looks like Tina fully enjoys the Ford's right along with you. Seeing that helps me sell the idea to SWMBO. ;~)
Paul as usual for you, this was a very enjoyable video. I got to help put a similar car back on the road many years ago with my good friend Bud. This car started right up after we did similar work under the hood. I just lost Bud a couple of months ago and this video just brought a great memory back to me. Thanks for the memories, Lecil Alexander
Thanks Joe! I have a wireless moc setup that I use infrequently, but I used it here. I prefer the wired one because it is low tech. But, wires would have been in the way for this stuff.
Great vid Paul! My favorite part was the huge smile on your face when “Athena” fired right up. You looked like you could’ve ate a banana sideways in one bite. We have a generational 29 Tudor and enjoy it immensely. Keep up the good work!
Awesome. Love this car. Looked like you left off the Air maze? I read a lot of controversy over the air filter. Got a lot of input over a phone conversation with David Renner. We can leave it there. That could be another video if you have done one already. Back to this video. Love it. Keep them coming. Thanks
That wasn't an Air Maze. it was some homebrew using plastic tubing and rubber hose that was disintegrating. These cars didn't come with air filters, and although I do run air filters on some cars that drive a lot, I don't on cars under construction. I want to see if the carb is dripping or if the float valve isn't working right, etc. Otherwise, it will soak the filter element with gas and BOOM!
Wow! This is so fun, we are so excited to watch the progress on Athena! Thanks Paul, just delightful as always, AND, we just got our new t-shirts so we are now officially the "warranty"
This car looks like it has a good base for a nice smooth project. To me that's no welding or major body work. I'm looking forward to it, and hoping that Tina will join in too with what she's willing to do.
Great video Paul! Being a new Model A enthusiast that is currently in the middle of a frame off restoration of a 31 DeLuxe Coupe, I’m so excited to see the progress of Athena!
@@ModelA I’ve never done a TH-cam video before, but maybe I will! I’m really a novice when it comes to Model A’s, but I’m learning and loving every minute of it! Put new brake rods in today, so that was an accomplishment for me!
Athena looks like a really good "Core" to begin your project with. I am particularly interested in what condition the suspension and steering components are in. I will be very interested to see each step, and to see how this turns out. Keep'em coming, Paul.
Just FYI, there are some of us Gen X'ers out there playing with Model A's too!...oh and it looks like we have another common problem...Hallicrafters radios...dig the S-38 on the shelf behind you!
I inherited a 28 pickup from my dad last year. Removed it from his garage where it sat since he bought it in 1983. Plan to restore it in the next few years with my daughter. It’s a basket case now but will get restored.
@@ModelA That's great! I've always had a fascination with antique cars such as the Ford Model A and was surprised to learn all parts are still available. One day I would like to get one.
Hi Paul, I just saw your video about Athena. Had I known before about the voting, I would have voted "restore to original". I could have learned a lot for future projects. I am however curious what you will make out of the car. Love your videos.
Paul need your expertise....got the 1930 model A home , and have a problem with choke runs rich and backfires. Got linkage hooked like it should be. But now can't turn choke at all only in and out. And runs rough. And when it heated up coolant come out of over flow with a stream. So what ya think?
That was very useful to see how to breathe life into a sitting car. It was a driver. With the”custom paint“ and other added odds and ends. It should be an presentable and safe. That’s what I would do anyway
I know you didn't run it long, but I would have dumped that old oil before I tried to start it. I'm sure you'll swap all the fluids, drop the pan, clean it and check all the internals before you venture out too far your new gem. Did I see a modern, 12v alternator under the hood? If it has a 12v conversion are you going to change it back to 6v?
A great story and a great save! Say Paul, would you contemplate a video on Car Hauling trailers for Model As ? what options do you like and feel necessary? I searched for a used one for about 2 years, never found anything I liked, and ended up ordering a new one. It will be ready for pick up in about 4 weeks.
Hi Lexie. Interesting idea. Our trailer gets used for everything, not just Model A's. My friend Dave has a trailer better suited for Model A's. The whole trailer tilts instead of using ramps. it's lower, shorter, and slightly narrower. But it weighs more than ours. We've never found the perfect Model A trailer either.
Perfect timing Paul. Is the fitting coming from the sediment bowl to the fuel hose a ferrule to barb fitting, and the same at the carburetor? Also, there is a hose that appears to come from under the carb and runs up and over to the other side of the motor? What is that?
Hey Paul! I was wondering if the model a could be solely driven using the throttle lever on the steering wheel, like if the model t had the three speed transmission. If possible would you maybe consider doing a brief video showing that? Thanks!
I noticed the fuel line was converted to hose right off as my car is having trouble as we speak with contaminated fuel line. I'm thinking the problem is above the shutoff valve inside the car. Can you comment on the problem surrounding 90 year old, rusted inner fuel tanks. Any knowledge in resolving a contamination issue without removing the tank. Such as the "Dirty leg" solution I read about? Sloshing compounds? Tricks for cleaning out the rust flakes?
@@ModelA Спасибо. Желаю Вам долгих лет жизни, а Вашим автомобилям вообще никогда не умирать. Это достояние планеты. Thanks. I wish you a long life, and let your cars never die at all. This is the glory of the planet.
The car's lovely maroon paintwork shows just the right amount of fading to (at least visually) qualify as being in well looked-after original condition. I'd opt for keeping its appearance like this.
So what have you got against a wireless upper plate in the distributor?I've never had a problem with it. Athena? not bad. At least it starts and ends with the letter A.
Hi Jim. I was wondering when you'd pop in this one! I have been on tours where people with the wireless plates have problems and wind up borrowing my spare distributor to continue. There's around 3-5 amps running through the points when they are closed, and the wireless plates begin to build resistance as the brass and copper oxidizes. A distributor rebuilt the way I did in that video won't ever have that problem.
@@modeladenny1218 Heck, my first videos were shot on a flip phone. Besides, it isn't a competition! The way I see it, the more Model A info out there, the better. If you send me some decent quality photos, I'll work them into a video for you. How's that?
@@johnnyrocket6588 From the hints I got, it's gonna need more than a wash job. I'm disppointed in my Ford 260 V-8/4sp phaeton. Bought to drive and my adult kids can't even hold the clutch in long. She's gonna need more than a little lovin.
Curious. On average what would you say you are paying for a coupe in similar condition like Athena? I had a 1930 about 25 years ago. The prices today are astronomical. Is there a place where you go on line to look? I’m in Bakersfield Ca.
I don't keep track of prices. But if you want a ballpark, look at the auction sites. If you look at ebay, click on "completed auctions" or whatever it's called and see the prices for the cars that actually sold and how much.
By the way Paul, maybe I missed it, but what’s the verdict on “Operation Hoopty”? Is it going to be returned to original, sneak a few driveability changes in or go whole hog on Athena?
Question, I recently purchased a Cabriolet and plan to trailer it around 700 miles on a trailer very similar to yours. My question is do you think highway speeds of 65 to 70 would damage the convertible top?
Hi Paul.. recent sunscriber.. just purchased a "barn find" 30 Model A Pickup.. all original ( I think) it's not ran for ?????? But it turns over but there's no fire Would you recommend flushing everything and starting with new fluids everywhere? Is there a need to put droplets of oil in the cylinders? Lots of question for a "Nudge" in cigar language that's a beginner with absolutely no idea what I got myself in to. Lol
Hey William, Assuming the oil is full and no water in it, and assuming it is still slippery, I wouldn't change it until it barks off finally. No fire could be anything from the ignition switch to the points, to the coil or condenser. LOTS of variables there. Start by making sure you have voltage at the points with the points held open (some paper works well) and the ignition key ON.
@@ModelA thank you.. I will be sure to check the radiator to make sure it has fluids and the motor oil doesn't (lol) have fluids.. so there is no need to put droplets of oil to lube cylinders. Had an old farmer tell me that
It doesn't hurt, but it probably won't gain you much either. The Model A oiling system is gravity and splash. As long as there is oil in the dipper trays and valve galley, you can spin it all you want. Until the oil pump fails, then disregard everything I just said! Hahaha!!
I hope this comment gets to you this is an older video. I just bought a 1930 Model A that looks exactly like Athena.. I've had it a few weeks. It's needs alot of little things done to it.. anyway , thanks for all.the how too videos
Nice video Paul, Athena is a nice looking car and looking forward to seeing how you do things on her and how it turns out. Please tell your Dad that the new coveralls don't cut it, where's the old wishbone style ? Haha Have a nice Easter Paul.
@@chelbeezfishin5763 Two other things to consider besides the rings: Is there too much oil in the engine? Sometimes the "F" on the dipsticks can be confusing and if added, the excess oil will be forced out. Second, does the oil filler pipe have a baffle in it?
That’s a very nice 31. Being from the Deep South I got a kick out of you calling your wife your spouse unit. Down here we say hey you. Lol just kidding she would kick my butt if she read this. 🤪
When a car that hasn't run in 20 years starts quicker than the neighbor's daily driver xD
It surprised all of us!
I still can't believe I got to name this incredible car! Such an honor! I'm excited to see Athena's progress!
Yes! Thank you so much for the name! Now, when you get over to the states, you have to go for a ride in it
@@ModelA that would be fun! And you know what, since I drive a stick shift, I could probably even drive it! 😂 But don't worry, I wouldn't dare 😂
@@BeetTheRush I would enjoy video taping that! Especially if we were doing a manifold cook at the same time. If you rev the motor too high, I can shout "You're burning the vegetables!!"
@@BeetTheRush Double clutching the down shift is, apparently, the only trick. Go for it, Beet'! And Paul can make the first "learn to drive a model A" video.
@@ModelA ha ha that would be hilarious 😂
Wow, she started right up! Runs pretty decently too. Lots of potential in Athena!
We shall see!
I like that at 00:42. "This is a 1931 Ford Model A Coupe that has some 1931 parts on it".
Truth in advertising, right?
😂
Thought for a second that you were really going to show-off and back the car on the trailer! Athena looks like a great project car with lots of potential!
Ultimate flex, right? Ha ha!
Love the videos, been watching since I bought my grandfathers 31' 5 window coupe.
I just gained possession of my Grandfathers 31 Model A that had been sitting since 1992 (I was 7yrs old at the time) . I recently Got it running all I had to do was buy a new battery ,cleaned and gapped the points and fresh gas. It started right up and idled without even choking it. Of course I checked the fluids before starting.. I was so excited on how well it ran I hopped in it and rode around my yard and country road. All the memories I had riding in it Came rushing in when I drove the car out of the garage and up my driveway. Thanks for all the videos! It has helped tremendously getting to know my 31'.
From what I have learned My 31 is a unrestored all original survivor..
Great old car! Glad you are saving her!!👍🏻
Thanks, 32!
I love this car, it was the first car of my grandfather in the '30s here in Portugal. Thank you.
Gracias!!!
Obrigado
@@ModelA, obrigado
Tina was smiling at the end there, but at first sight I thought maybe she, ahhhh... didnt like the color?
We love your videos up here in Calgary, Paul. Keep up the great work. I'm gonna go to your store site now to send some restoration support your way.
😊 thank you Brenton! She liked it. Was just acting (I think)
@@ModelA I thought so. I know she's a good sport and she's all in from past videos (e.g., saw her video changing oil, I think it was). In fact, saaaaaay... She could be a real role model for my Michelle. Yep, I'm going back to book mark that video.!
@@brentoncrowhurst8338 Nice! She offered to wash the car, so she will likely be in another video very soon!
@@ModelA please do get that into a video, as Michelle tells me, since my last comment, she won't do oil. "Man's work!" I just can't believe that sexist remark in this day and age.
Seriously, looks like Tina fully enjoys the Ford's right along with you. Seeing that helps me sell the idea to SWMBO. ;~)
Oh yea. She's right there getting greasy with the guys.
Athena with the patina. Now the rebuild begins. You and your Dad got her going in no time, thanks for sharing.
He's been doing this for 60 years. How can you fail with a ringer like that on your team?
Really looking forward to this project series!
Thanks, Doc!
I love it, but I know you already sold it, but I would sure love to have one, maybe some day! Thanks Paul, I'll be watching more.
Beautiful car.
Thanks! Wait til you see it up close though.
Paul as usual for you, this was a very enjoyable video. I got to help put a similar car back on the road many years ago with my good friend Bud. This car started right up after we did similar work under the hood. I just lost Bud a couple of months ago and this video just brought a great memory back to me.
Thanks for the memories,
Lecil Alexander
I'm so sorry, Lecil. I hope you're keeping Bud alive in your memories.
@@ModelA yes I am he was a great Model A person like your dad
Wow, can't wait to see the finished car!!
Me too!
Te felicito Paul tus videos son muy buenos!!!... Soy FANATICO DE FORD..!!!!!
I sure liked the video with Athena. I also really liked that you no longer have the cable to your mike hanging down to the floor!
Thanks Joe! I have a wireless moc setup that I use infrequently, but I used it here. I prefer the wired one because it is low tech. But, wires would have been in the way for this stuff.
Looking forward to seeing you do the shake down and fix this car up! Your videos are very helpful with teaching me about my A.
Coming soon. Thank you, John!
Great vid Paul! My favorite part was the huge smile on your face when “Athena” fired right up. You looked like you could’ve ate a banana sideways in one bite. We have a generational 29 Tudor and enjoy it immensely. Keep up the good work!
That was hilarious, Tami! Hahahaa! And, you're right!
Awesome. Love this car.
Looked like you left off the Air maze? I read a lot of controversy over the air filter. Got a lot of input over a phone conversation with David Renner. We can leave it there. That could be another video if you have done one already.
Back to this video. Love it.
Keep them coming.
Thanks
That wasn't an Air Maze. it was some homebrew using plastic tubing and rubber hose that was disintegrating. These cars didn't come with air filters, and although I do run air filters on some cars that drive a lot, I don't on cars under construction. I want to see if the carb is dripping or if the float valve isn't working right, etc. Otherwise, it will soak the filter element with gas and BOOM!
@@ModelA
Though it looked odd. 👍
Another great video! Can't wait to see Athena's progress.
Thank you
Wow! This is so fun, we are so excited to watch the progress on Athena! Thanks Paul, just delightful as always, AND, we just got our new t-shirts so we are now officially the "warranty"
Excellent! Thank you so much, Steve!
This car looks like it has a good base for a nice smooth project. To me that's no welding or major body work.
I'm looking forward to it, and hoping that Tina will join in too with what she's willing to do.
Don't get too happy there... I may have to do some welding and riveting on the frame. Stand by for the next episode.
@@ModelA Will do!!!
Great video Paul! Being a new Model A enthusiast that is currently in the middle of a frame off restoration of a 31 DeLuxe Coupe, I’m so excited to see the progress of Athena!
Good work, Ken! Do you plan to do any videos and share your project with us so we can drool over it?
@@ModelA I’ve never done a TH-cam video before, but maybe I will! I’m really a novice when it comes to Model A’s, but I’m learning and loving every minute of it! Put new brake rods in today, so that was an accomplishment for me!
@@kenrhoda2573 Good job!
Great to see the project underway
Paul,
I just recently up a '29 Tudor. It runs but needs a LOT of TLC. Your videos have been very helpful. Thank you.
Glad to help, Merc!
Wow, good job. Today I also got my trabant running after an engine rebuild
Nice work!
Nice Super Duty and Trailer
My old man's rig. Mine is the white one off to the side in a few shots. We trade trucks once in a while.
Athena looks like a really good "Core" to begin your project with. I am particularly interested in what condition the suspension and steering components are in. I will be very interested to see each step, and to see how this turns out. Keep'em coming, Paul.
I will be diving deep into the problems in this car next. Stay tuned!
love the car! i still can’t get my model A to run right hopefully this video will help me out.
I hope so too!
Just FYI, there are some of us Gen X'ers out there playing with Model A's too!...oh and it looks like we have another common problem...Hallicrafters radios...dig the S-38 on the shelf behind you!
Hahahaa! Good eye, Vincent. Yes, we have some millennials in our Model A club.
Beautiful Car. Enjoy!
Thanks Karpis!
I think it a beautiful car! I would be proud to own it! I love the color scheme! Keep the WWWs!😀
We will see!
I know this is about the model A but that 7.3 is nice, great trucks
Love Athena! Another great video! thanks for sharing, looking forward to more videos.
Awesome! Thank you!
Same color scheme as my friends 1930 Fordor. I also thought you were gonna strut your stuff by backing up the trailer.
Great videos, they always make my day. Does your Dad have any recommendation for machine shops?
We use Baechler Machine shop in San Andreas now for everything.
I inherited a 28 pickup from my dad last year. Removed it from his garage where it sat since he bought it in 1983. Plan to restore it in the next few years with my daughter. It’s a basket case now but will get restored.
Nice! You're going to make some wonderful memories that your daughter will tell her grandkids someday.
2:00 Your old man sitting in the background has that look of "turn the damn camera off and get going, I don't have all day you know!"
Ha ha! He's actually getting in to the whole video thing now. He wants to do more of them.
@@ModelA That's great! I've always had a fascination with antique cars such as the Ford Model A and was surprised to learn all parts are still available.
One day I would like to get one.
Go for it!
The Model A doctor saves another patient! You don't skip the details, plus we all learn a thing or two. Thanks!
Yes! Thanks.
Hi Paul, I just saw your video about Athena. Had I known before about the voting, I would have voted "restore to original". I could have learned a lot for future projects. I am however curious what you will make out of the car. Love your videos.
Thanks Robert! It's going to be stock with just a couple small modifications for drivability. No worries!
What a sweet ride !!!
Thanks!!
Impressive Paul Mammal. Get that coupe to Wake up!
It really did. Thing really wants to run. Like a puny mammal from a Raptor!
Thanks Paul, good to see Mrs. Paul so happy and excited. What would it cost to make a complete Model A out of Fibre-Glass? Cheers mate 🥂🍺
No idea. Thanks Yhen!
Paul need your expertise....got the 1930 model A home , and have a problem with choke runs rich and backfires. Got linkage hooked like it should be. But now can't turn choke at all only in and out. And runs rough. And when it heated up coolant come out of over flow with a stream. So what ya think?
I like Athena. It's fun bringing something mechanical back to life.
Yep!
With too many hobbies, some of my car projects died.
The only thing that dies over here is my bank balance
@@ModelA Every time my kids stop over I point at the Model A and tell them "there's your inheritance".
That was very useful to see how to breathe life into a sitting car. It was a driver. With the”custom paint“ and other added odds and ends. It should be an presentable and safe. That’s what I would do anyway
I know you didn't run it long, but I would have dumped that old oil before I tried to start it.
I'm sure you'll swap all the fluids, drop the pan, clean it and check all the internals before you venture out too far your new gem.
Did I see a modern, 12v alternator under the hood?
If it has a 12v conversion are you going to change it back to 6v?
amazingly new shining distributor nut and screw.. in my neck of the woods they would be rust in 20 years and frozen on.
A great story and a great save! Say Paul, would you contemplate a video on Car Hauling trailers for Model As ? what options do you like and feel necessary? I searched for a used one for about 2 years, never found anything I liked, and ended up ordering a new one. It will be ready for pick up in about 4 weeks.
Hi Lexie. Interesting idea. Our trailer gets used for everything, not just Model A's. My friend Dave has a trailer better suited for Model A's. The whole trailer tilts instead of using ramps. it's lower, shorter, and slightly narrower. But it weighs more than ours. We've never found the perfect Model A trailer either.
Perfect timing Paul. Is the fitting coming from the sediment bowl to the fuel hose a ferrule to barb fitting, and the same at the carburetor? Also, there is a hose that appears to come from under the carb and runs up and over to the other side of the motor? What is that?
You'll see in the video we're shooting right now. Coming soon!
Hey Paul! I was wondering if the model a could be solely driven using the throttle lever on the steering wheel, like if the model t had the three speed transmission. If possible would you maybe consider doing a brief video showing that? Thanks!
If you're in a pinch, yes.
was a chrome radiator shell standard 1931
No, stainless steel was standard in 31
I noticed the fuel line was converted to hose right off as my car is having trouble as we speak with contaminated fuel line. I'm thinking the problem is above the shutoff valve inside the car. Can you comment on the problem surrounding 90 year old, rusted inner fuel tanks. Any knowledge in resolving a contamination issue without removing the tank. Such as the "Dirty leg" solution I read about? Sloshing compounds? Tricks for cleaning out the rust flakes?
Yes! Coming soon.... Hint: You have to remove the tank. Another hint: You need lead pellets and ATF.
What a fun video and full of promise to come. My Austin is called Audrey! 😊👍
Nice! Best wishes to you and Audrey!
Никак не могу поверить, что такие красивые штучки существуют на самом деле.
I can't believe that such beautiful things actually exist.
Поверьте, друг мой! Наилучшие пожелания вам. Pover'te, drug moy! Nailuchshiye pozhelaniya vam.
@@ModelA Спасибо. Желаю Вам долгих лет жизни, а Вашим автомобилям вообще никогда не умирать. Это достояние планеты.
Thanks. I wish you a long life, and let your cars never die at all. This is the glory of the planet.
6:55 you can hear her say "What do you mean, I'll be trailered all the way? I can go there myself! What's that fuss about, young man?"
Hahaa! She is too muffled with a mouthful of grease
@@ModelA Indeed! But you know how old folks are... "Nah, I don't need a doctor, I'm fine, can't you see??" ;)
In this video I was just waiting for you to give the car a wash because that would’ve been very satisfying
Then you're going to love the next installment!
The car's lovely maroon paintwork shows just the right amount of fading to (at least visually) qualify as being in well looked-after original condition. I'd opt for keeping its appearance like this.
We will see what it looks like after all the crud is cleaned off!
So what have you got against a wireless upper plate in the distributor?I've never had a problem with it. Athena? not bad. At least it starts and ends with the letter A.
Hi Jim. I was wondering when you'd pop in this one! I have been on tours where people with the wireless plates have problems and wind up borrowing my spare distributor to continue. There's around 3-5 amps running through the points when they are closed, and the wireless plates begin to build resistance as the brass and copper oxidizes. A distributor rebuilt the way I did in that video won't ever have that problem.
Hello Paul, I would like to know if there is a way to adjust model A valves without removing the head.
Yes. Why would you remove the head to adjust the valves?
Can you please explain this procedure. Thank you for your help. Instructions that I have found are only during engine rebuild.
@@405DLE Maybe in an upcoming video.
Thank you, I’m sure that would be a popular video!!!!!!
I really like Athena, once you clean her up and take those aftermarket accessories off she’ll look great!
They'll sing 'there' s that car and there's nothing that's cleana / It's a '31 couple by the name of Athena. "
@@modeladenny1218 Will you be making any videos so we can ride along with you?
@@ModelA I've considered it. All I have now is a flip phone and really don't know how to post videos.
Besides, I can't compete with Mr Model A Mammal.
@@modeladenny1218 Heck, my first videos were shot on a flip phone. Besides, it isn't a competition! The way I see it, the more Model A info out there, the better. If you send me some decent quality photos, I'll work them into a video for you. How's that?
“Spouse unit”; funny comment 😆. This looks like a nice car that you’re making perfect. Thanks for sharing!
Thanks for watching
I'd clean that Model A up, grease and oil everything, and just drive her.
@@modeladenny1218 I think that is exactly what Paul is going to do. She deserves the best treatment.
@@johnnyrocket6588 From the hints I got, it's gonna need more than a wash job.
I'm disppointed in my Ford 260 V-8/4sp phaeton. Bought to drive and my adult kids can't even hold the clutch in long.
She's gonna need more than a little lovin.
@@modeladenny1218 Disappointing, but on the bright side you always have someone to teach.
Curious. On average what would you say you are paying for a coupe in similar condition like Athena? I had a 1930 about 25 years ago. The prices today are astronomical. Is there a place where you go on line to look? I’m in Bakersfield Ca.
I don't keep track of prices. But if you want a ballpark, look at the auction sites. If you look at ebay, click on "completed auctions" or whatever it's called and see the prices for the cars that actually sold and how much.
Love the color combo, but why does this 1931 Ford have a 1930 radiator shell?
Somebody stuck that on there. Good eye!
By the way Paul, maybe I missed it, but what’s the verdict on “Operation Hoopty”? Is it going to be returned to original, sneak a few driveability changes in or go whole hog on Athena?
Hi Kamran. Going by the poll results, looks like pretty stock with some very mild modifications for drivability.
Have a 1930 Model A & can not find any information on the tire pressure. Any thoughts?
35 PSI, man.
Question, I recently purchased a Cabriolet and plan to trailer it around 700 miles on a trailer very similar to yours. My question is do you think highway speeds of 65 to 70 would damage the convertible top?
Yes
Hi Paul.. recent sunscriber.. just purchased a "barn find" 30 Model A Pickup.. all original ( I think) it's not ran for ?????? But it turns over but there's no fire
Would you recommend flushing everything and starting with new fluids everywhere? Is there a need to put droplets of oil in the cylinders? Lots of question for a "Nudge" in cigar language that's a beginner with absolutely no idea what I got myself in to. Lol
Hey William, Assuming the oil is full and no water in it, and assuming it is still slippery, I wouldn't change it until it barks off finally. No fire could be anything from the ignition switch to the points, to the coil or condenser. LOTS of variables there. Start by making sure you have voltage at the points with the points held open (some paper works well) and the ignition key ON.
@@ModelA thank you.. I will be sure to check the radiator to make sure it has fluids and the motor oil doesn't (lol) have fluids.. so there is no need to put droplets of oil to lube cylinders. Had an old farmer tell me that
It doesn't hurt, but it probably won't gain you much either. The Model A oiling system is gravity and splash. As long as there is oil in the dipper trays and valve galley, you can spin it all you want. Until the oil pump fails, then disregard everything I just said! Hahaha!!
Oh, and lube the distributor!
@@ModelA thanx for the coaching.. much appreciated
I hope to own a model A one day.
I hope this comment gets to you this is an older video. I just bought a 1930 Model A that looks exactly like Athena.. I've had it a few weeks. It's needs alot of little things done to it.. anyway , thanks for all.the how too videos
I got it. Congratulations!
That’s my dream car!!
Get you one, SMB!!!
Nice video Paul, Athena is a nice looking car and looking forward to seeing how you do things on her and how it turns out. Please tell your Dad that the new coveralls don't cut it, where's the old wishbone style ? Haha Have a nice Easter Paul.
I'll tell him. Hahaa!!
Athena is the name of my Harley Davidson motorcycle. Awesome name.
Nice!
ATHENA: Goddess of Wisdom & War!
In this case, goddess of dirt and poor maintenance.
This Athena namesake seems like a Goddess of good food. If I had Paul's new Model A project I'd ride over to Athena's for breakfast.
Denny- You would drive right THROUGH Athena's for breakfast, unless you fixed the brakes first.
@@ModelA My guess is Athena the Model A has no brake fluid!
@@modeladenny1218 Nailed it!!
Nice car
My model a is blowing oil out of the filler cap
What can cause the problem
Poor ring seal (piston rings), bad bearing material, timing way off, etc.
@@chelbeezfishin5763 Two other things to consider besides the rings: Is there too much oil in the engine? Sometimes the "F" on the dipsticks can be confusing and if added, the excess oil will be forced out.
Second, does the oil filler pipe have a baffle in it?
New to the channel. Watched the second vid first then looked for this one. Looks like a real project. By the way not a millennial an aging Boomer.
Welcome, Dan!
She didn’t look that thrilled at the reveal🤔
Could you tell?
Timing Tool.
Model T didnt seem to interested in Athena.
She warmed up to it eventually
Athena - the goddess of wisdom, handicraft, and warfare ........
Hmmmmmm
Eugene, in this case it's goddess of dirt and poor maintenance.
@@ModelA love it
That’s a very nice 31. Being from the Deep South I got a kick out of you calling your wife your spouse unit. Down here we say hey you. Lol just kidding she would kick my butt if she read this. 🤪
I won't tell.
Don't look like no hoopty
Wait til you see the way it's wired and put together
Leave it to the Boomers to buy some cheap tow straps and not even know how to properly use them.
Educate me, Weston. What should we have done instead?